Research and Application of Deep Learning Technology in Prefabricated Buildings

Prefabricated buildings have become an important development trend in the field of modern architecture because of their high efficiency and environmental friendliness. Artificial intelligence and deep learning technology have been increasingly applied in prefabricated buildings. Deep learning technology provides comprehensive optimization of building design, construction, quality control, and cost and schedule management through the learning and analysis of large amounts of data. This paper aims to explore the application of deep learning technology in prefabricated buildings, analyze the revolutionary changes it brings in different stages, and discuss the problems faced when implementing this technology.

Research on Planning and Design of Multi-Story Prefabricated Electric Bicycle Charging Parking Lot in Urban and Rural Areas

In recent years,disorderly parking and difficult charging of electric bicycles have been challenges in urban management.The rapid growth of electric bicycles is in contradiction with the lack of dedicated parking spaces and charging service facilities in towns and villages.To solve the issue of parking and charging electric bicycles in limited urban and rural spaces,prefabricated building technology is applied to the design of a multi-story electric bicycle parking lot.The multi-story prefabricated electric bicycle parking lot is utilized in urban and rural planning and design to upgrade parking facilities in old urban areas,land-constrained commercial areas,as well as counties,towns,and rural areas with inadequate municipal facilities.Multi-story prefabricated electric bicycle parking lots are the application exploration of industrial buildings,and promote the high-quality development planning and construction of towns and counties and villages.Compared with the single-story metal charging station,the multi-story assembled electric bicycle parking lot has the characteristics of integrating parking and charging,being more durable and safer in structure,accommodating a large number of vehicles,and improving the space utilization rate.

Practice Exploration of Green Building Design in Prefabricated Residential Building Design

Prefabricated residential building design fully embodies the concept of green building and aligns with China’s strategic plan for sustainable development.However,there is a need to further optimize green building design methods,enhance the design quality of prefabricated residential buildings,and improve energy and resource utilization.Compared to traditional construction methods,prefabricated residential building design still faces several challenges during the actual construction process.These challenges include difficulties in design,material selection and processing,and the high demands for construction coordination.To strengthen the application of green building concepts in prefabricated residential design and effectively promote the sustainable development of the construction industry,this paper discusses practical measures for implementing green building design in prefabricated residential projects for reference.

Comparison of the Clinical Effect of Prefabricated Fiber Post and Plastic Fiber Post in Oral Repair

Objective:To observe and analyze the clinical effect of prefabricated fiber posts and plastic fiber posts in oral repair.Methods:A total of 128 patients admitted to our hospital from January 2023 to June 2024 underwent oral prosthesis treatment,of which the control group(n=64)was treated with prefabricated fiber posts and the observation group(n=64)with plastic fiber posts.The efficacy,retention rate,and complication rate of the two groups were compared.Results:The total effective rate of the observation group was 96.88%,which was significantly higher than that of the control group(84.38%)(P<0.05).The restoration retention rate in the observation group was 95.31%,which was significantly higher than that in the control group(85.94%)(P<0.05).The incidence of postoperative complications in the observation group was 4.69%,which was significantly lower than that in the control group(15.63%)(P<0.05).Conclusion:For patients with oral prostheses,the use of plastic fiber posts for treatment shows better clinical effects,effectively improving the retention rate of the prosthesis and reducing the incidence of complications.Thus,it is worthy of popularization and application.

Discussion on Cost Budgeting and Cost Control Strategies for Prefabricated Construction Projects

In the process of China’s national economic development,the construction industry is a very important component and has a direct impact on the level of China’s economic construction.Nowadays,the development speed of the prefabricated construction industry is constantly accelerating.To effectively ensure the economic benefits of engineering projects,it is necessary to comprehensively strengthen cost budgeting and cost control.This article analyzes the cost budget of prefabricated construction projects,introduces the application advantages of prefabricated construction,and proposes specific cost budgeting and cost control measures,hoping to provide some reference for relevant researchers.

Research and Application of Recycled Concrete Technology in Prefabricated Buildings

The utilization of waste concrete as a raw material for recycled concrete in the domain of prefabricated components is garnering greater interest.This paper delineates and examines the concept,categorization,methodologies of preparation,applicable sectors,and evaluative metrics of recycled concrete technology,highlighting its prospective benefits.Nonetheless,for the successful integration of recycled concrete technology into prefabricated component applications,it is imperative to systematically enhance its physical,mechanical,and attributes,as well as its environmental efficacy.Moreover,to foster the continued advancement of recycled concrete technology,innovative initiatives,standardization,educational programs,demonstration projects,and collaborative efforts are crucial to promote broader adoption and realize improved outcomes within the realm of prefabricated components.In conclusion,recycled concrete technology is poised to play a pivotal role in prefabricated construction,offering robust support for propelling the construction industry towards a sustainable future.

A Review of Innovative Design Strategies for Prefabricated Green Buildings

Prefabricated green buildings are becoming a trend in the construction industry of China.The prefabricated components are made using modern technologies like green materials,artificial intelligence,and low-carbon and energy-saving techniques.This makes them an important aspect of the development of the construction industry in China,representing modernization and sustainable development.This article presents a study on the innovative design of prefabricated green buildings.This article serves to promote sustainable development on a macro level.

Exploration and Practice of Integrating Ideological and Political Education into the“Comprehensive Practical Training in Prefabricated Building Construction”Course

This paper focuses on the ideological and political construction of the course“Comprehensive Practical Training of Prefabricated Building Construction”and deeply discusses its exploration and practice process.By building an ideological and political teaching system in line with the characteristics of“Comprehensive Training of Prefabricated Building Construction,”ideological and political elements such as industry spirit,professional ethics,and social responsibility are organically integrated into all links of practical training and teaching.In terms of teaching methods,various innovative means such as case analysis,role-playing,and group discussion are adopted,and modern information technologies such as virtual reality and augmented reality are used to improve the teaching effect.At the same time,a diversified teaching evaluation system is formulated to ensure the sustainability and effectiveness of ideological and political education.This study not only enriches the theoretical research of ideological and political courses but also provides a practical reference for the ideological and political construction of similar courses,which is of great significance for promoting the overall improvement of the quality of talent training in higher education.

Analysis of Intelligent Construction Technology of Building Prefabricated Components Based on BIM

In this paper,the intelligent construction of prefabricated components is analyzed based on building information modeling(BIM).It includes an overview of BIM-based prefabricated components and intelligent construction,intelligent production lines in BIM-based intelligent construction systems,and analysis of the application of intelligent manufacturing in BIM-based prefabricated components.It was found that the determination of construction goals,the establishment of intelligent construction systems,and the application of intelligent construction systems are all areas that need to be emphasized in producing prefabricated building components through intelligent construction.It is hoped that this analysis can provide some reference for the application of intelligent construction and the improvement of the quality of prefabricated building components.

Shear Behaviors of Steel-Plate Connections for Timber-Concrete Composite Beams with Prefabricated Concrete Slabs

To promote the development of timber-concrete composite(TCC)structures,it is necessary to propose the assembly-type connections with high assembly efficiency and shear performances.This article presented the experimental results of the innovative steel-plate connections for TCC beams using prefabricated concrete slabs.The steel-plate connections consisted of the screws and the steel-plates.The steel-plates were partly embedded in the concrete slabs.The concrete slabs and the timber beams were connected by screws through the steel-plates.The parameters researched in this article included screw number,angle steel as the reinforcement for anchoring,and shallow notches on the timber surface to restrict the slip of the steel-plates.Experimental results were discussed in terms of failure modes,ultimate bearing capacities,and slip moduli.It was found that increasing the number of screws could lead to the obvious improvement on the ultimate bearing capacities and the slip moduli at the ultimate state;and the angle steel as the reinforcement showed the slight influence on the ultimate bearing capacities and the slip moduli.The application of the shallow notch can greatly improve the ultimate bearing capacities and the slip moduli.The calculation models for the ultimate bearing capacities and the slip moduli of the steel-plate connections with and without shallow notches were proposed,which showed good accuracy compared with the experimental results.

Water Supply and Drainage Design for Prefabricated Buildings Under the Green Building Concept

With the continuous development of society and the market economy,people are putting forward higher and higher requirements for the construction,technology,and environmental friendliness of buildings.The prefabricated building not only has high installation efficiency,but is also safe and environmentally friendly,which is in line with the green building concept.The drainage design is a critical part of prefabricated buildings.In order to ensure the quality and construction efficiency of the building project,it is necessary to design the building water supply and drainage properly.Therefore,an in-depth investigation on prefabricated buildings was carried out in this paper,and water supply and drainage design for prefabricated buildings under the green building concept is proposed,in hopes of providing references for future water supply and drainage designs.

An Empirical Study on the Impact of Different Structural Systems on Carbon Emissions of Prefabricated Buildings Based on SimaPro

In the context of global emission reduction, the low-carbon sustainable development of the construction industry has become an important research content. With the vigorous development of new industrial technologies, the application of prefabrication technology to buildings had become a mainstream. However, the research on the role of prefabricated technology in reducing building carbon emissions was not yet comprehensive, and the research on the relationship between prefabricated structure types and carbon emissions in the construction stage was not yet thorough. Guided by life cycle assessment (LCA), this paper used the scenario analysis method to set different working conditions for five different structural systems, and used SimaPro software to evaluate the carbon emissions of prefabricated buildings in order to clarify the carbon emissions of prefabricated buildings under different structural systems, and explore their impact mechanisms in depth. Finally, take the existing buildings in China as an empirical study, the results showed that: 1) The carbon emissions produced by the four common prefabricated structural systems were almost the same. Different structures had different requirements for the combination of components. The carbon emissions of individual buildings would be superimposed according to the carbon emission characteristics of various individual components to form the final total carbon emissions. 2) When the building structure system requires more combinations of components, the greater the amount of transportation invested in the transportation process, the more carbon emissions would be caused. In the calculation of all individual building construction stages, the carbon emissions generated by tower cranes almost exceed the sum of the carbon emissions of all mobile machinery. 3) Prefabricated shear wall structures and prefabricated frame-shear wall structures require a large amount of hoisting of prefabricated shear walls, so the carbon emissions of their mechanical equipment were also the highest.

Research on Prefabricated Interior Renovation of Existing Buildings

Requirements for the quality of housing have been increasing in recent years.Many existing buildings can no longer meet the needs of residents due to functional,layout,and other issues,and need to be renovated.However,traditional renovation methods have problems such as high pollution and high consumption.With the rapid development of prefabricated construction and green environmental protection concepts,the problems of traditional interior renovation can be resolved using prefabricated interior decoration.As a new and advanced method of renovation,prefabricated renovation reduces construction segments,workload,pollution,and waste,and it promotes the upgrading of the traditional renovation industry.

Design and Construction Technology of Prefabricated Reinforced Concrete Slab Culverts

Compared with traditional cast-in-situ concrete slab culverts,prefabricated reinforced concrete slab culverts can be produced more quickly and has strong quality controllability,strong earthquake resistance,and repeatability.They will be the primary production method of slab culverts in the future.This article offers a comprehensive review of the design and construction technology associated with prefabricated reinforced concrete slab culverts.The objective is to provide a valuable reference for related enterprises,enhance the quality of design and construction in precast pile configuration,and,in turn,contribute to the advancement of construction projects within our country.

Research on Prefabricated Open Caisson Construction Technology

With the continuous improvement of urban residents’lives,the demand for of urban infrastructure construction increases,requiring more and more advanced engineering technology.We should not only speed up the progress of the project,but also reduce the impact of the construction on the surrounding environment.Our company has had several achievements in this regard,and prefabricated open caisson construction process is one of them.In this paper,the application of prefabricated caisson construction method is analyzed in depth according to the actual situation of the rain sewage reconstruction treatment project of Minghe ecological water system in Dancheng County.Through practice,it is concluded that this construction method greatly improves the construction efficiency,shortens the overall construction process,reduces the construction cost,and effectively improves environmental quality of the construction site,which has good reference value.

Countermeasures to Promote the Training of Prefabricated Construction Talents for Architectural Design Majors in Vocational Colleges

To concentrate on cultivating prefabricated construction talents for architectural design majors in vocational colleges in China,we should adhere to the basic principles of professional coordinated development and integration of production,teaching,and research to determine the teaching objectives and contents,set up a double-teacher teaching team,and provide sufficient resources and funds.Specifically,it is necessary to optimize the curriculum system with the guidance of professional groups,create teaching situations with information platforms,introduce Building Information Modeling(BIM)technology to connect with the actual situation,adhere to the combination of education and training to improve the practice mechanism of school-enterprise cooperation,deepen the integration pattern of post-course certificate competition,and follow the ideological and political teaching route of professional course to realize the comprehensive improvement of students’knowledge,skills,and professional quality.

SECCL-based research on prefabricated chunks in achieving oral English fluency

Fluency on oral English has always been the goal of Chinese English learners. Language corpuses offer great convenience to language researches. Prefabricated chunks are a great help for learners to achieve oral English fluency. With the help of computer software, chunks in SECCL are categorized. The conclusion is in the process of chunks acquiring, emphasis should be on content-related chunks, especially specific topic-related ones. One effective way to gain topic-related chunks is to build topic-related English corpus of native speakers.

Study on EFL and Prefabricated Chunks

Language is the most important tool for human beings with the outside world.In order to improve the efficiency of communication,people need to maximize the efficiency of language processing to ensure the smooth production and understanding of the meaning,although it is a subtle and complex process in human communication.As Dr.Widdowson proposed that language knowledge is largely chunk knowledge in the 1980’s.The process of language output is the process of copying prefabricated Chunks knowledge and then transferring it to language output.Based on data collected before,this paper intends to study the dominant reproduction and implicit output of the English language from the perspective of prefabricated chunks,to play a guiding role in optimizing the output ability of EFL learners.

Load behaviors of a prefabricated wood framing house during lifting and transportation

Lifting for handling and flatbed truck transportation to the job site are important processes during manufacture of prefabricated wooden construction units like mini homes and building modules. Significant damage can occur to sections or components of units during these operations. Although damage usually will not impair its structural safety, it is costly to fix and causes the public to perceive prefabricated wooden buildings as low quality products. Field observations and preliminary numerical models for prefabricated units subject to lifting and transportation forces are summarized here. Once fully developed and verified, models will support the creation of damage mitigation strategies centered on structural details indicating how units are to be supported during lifting and transportation.

Research on the Integration of BIM Technology in Prefabricated Buildings

Today we are in a technologically explosive information society. The cross- border integration of manufacturing and construction is prefabricated buildings. The cross-border integration of construction and IT is BIM technology, and the emergence of BIM technology provides new ideas for prefabricated building, and the integration of prefabricated building and BIM technology realizes the construction industrialization. This paper studies the application of BIM technology in prefabricated buildings, including the design phase, construction and assembly phase, operation and maintenance phase, and application analysis of related software, so as to improve the high efficiency, high quality and high precision development of prefabricated projects, and promote domestic green environmental protection. The development of the construction industry provides reference value for the application of BIM technology in prefabricated buildings.