A spark generator was employed to assist surface barrier discharge （SBD） in nitrogen at atmospheric pressure. The influence of spark discharge on the SBD electrical behavior is investigated by means of volt-ampere c...A spark generator was employed to assist surface barrier discharge （SBD） in nitrogen at atmospheric pressure. The influence of spark discharge on the SBD electrical behavior is investigated by means of volt-ampere characteristics. Also, the electron density of plasma in the filament of each SBD arrangement is determined by plasma radiation method. It is found that the filaments in spark-assistant SBD are much stronger, while the corresponding mean electron density is much lower. Results show that the spark generator can improve the uniformity of SBD in atmospheric nitrogen in a particular range of applied frequency.展开更多
In the work, we studied the effect of the plasma of a runaway electron preionized （REP） diffuse discharge （DD） on the composition, structure, and properties of ST3PS steel surface layers. Voltage pulses with an in...In the work, we studied the effect of the plasma of a runaway electron preionized （REP） diffuse discharge （DD） on the composition, structure, and properties of ST3PS steel surface layers. Voltage pulses with an incident wave amplitude of up to 30 kV, FWHM of around 4 ns, and rise time of around 2.5 ns were applied to the gap in an inhomogeneous electric field. The ST3PS steel specimens exposed to this type of discharge revealed changes in their defect subsystem, suggesting that the runaway electron preionized diffuse discharge provides surface hardening of the steel.展开更多
The non-inductive plasma current startup is an important motivation in SUNIST spherical tokamak. In the recent experiment, the magnetron microwave system of 100 kW and 2.45 GHz has been used to the ECR plasma current ...The non-inductive plasma current startup is an important motivation in SUNIST spherical tokamak. In the recent experiment, the magnetron microwave system of 100 kW and 2.45 GHz has been used to the ECR plasma current startup. Besides the toroidal field, a vertical field was applied to generate preliminary toroidal plasma current without the action of the central solenoid. As the evidence of plasma current startup with the effect of vertical field drift, the direction of plasma current is changed when the direction of vertical field changes during the ECR plasma current startup discharge. We also observed a maximum plasma current by scanning vertical field in both directions. Additionally, we used electrode discharge to assist the ECR plasma current startup.展开更多
基金supported by the technological project of Shenzhen, China (No.200620)Shenzhen Key Laboratory of Sensors Technology Open Fund of China (Nos.SST200908, SST200911)
文摘A spark generator was employed to assist surface barrier discharge （SBD） in nitrogen at atmospheric pressure. The influence of spark discharge on the SBD electrical behavior is investigated by means of volt-ampere characteristics. Also, the electron density of plasma in the filament of each SBD arrangement is determined by plasma radiation method. It is found that the filaments in spark-assistant SBD are much stronger, while the corresponding mean electron density is much lower. Results show that the spark generator can improve the uniformity of SBD in atmospheric nitrogen in a particular range of applied frequency.
文摘In the work, we studied the effect of the plasma of a runaway electron preionized （REP） diffuse discharge （DD） on the composition, structure, and properties of ST3PS steel surface layers. Voltage pulses with an incident wave amplitude of up to 30 kV, FWHM of around 4 ns, and rise time of around 2.5 ns were applied to the gap in an inhomogeneous electric field. The ST3PS steel specimens exposed to this type of discharge revealed changes in their defect subsystem, suggesting that the runaway electron preionized diffuse discharge provides surface hardening of the steel.
基金supported by International Atomic Energy Agency(Research contract No.12935/R0)JSPS-CAS Core-University Program on Plasma and Nuclear Fusion and the National Natural Science Foundation of China(Grant No.10275041 and 10375089)
文摘The non-inductive plasma current startup is an important motivation in SUNIST spherical tokamak. In the recent experiment, the magnetron microwave system of 100 kW and 2.45 GHz has been used to the ECR plasma current startup. Besides the toroidal field, a vertical field was applied to generate preliminary toroidal plasma current without the action of the central solenoid. As the evidence of plasma current startup with the effect of vertical field drift, the direction of plasma current is changed when the direction of vertical field changes during the ECR plasma current startup discharge. We also observed a maximum plasma current by scanning vertical field in both directions. Additionally, we used electrode discharge to assist the ECR plasma current startup.
