Mutual effects between a gliding arc discharge and a premixed flame

Mutual effects between a gliding arc(GA)discharge at atmospheric pressure and a premixed CH_(4)/air flame were experimentally investigated.Effects of the flame on the GA were studied using simultaneous measurements of the current,the voltage,and the instantaneous images of the plasma columns.The GA in the flame has a thicker and more diffusive plasma column,and it is more frequently ignited at a smaller breakdown voltage than that in the air.The GA extension velocity and the gliding velocity in the flame are larger than those in the air.The electrode voltage drop of the GA discharge in the flame is about 160 V,whereas that in the air is about 220 V.Compared with the GA in the air,the different features of the GA in the flame can be explained by high-temperature,weakly ionized,and species-abundant environment that are generated by the premixed CH_(4)/air flame.Effects of the gliding arc discharge on the premixed flames were demonstrated using planar laser-induced fluorescence of hydroxyl radicals(OH)and formaldehyde(CH_(2)O).OH and CH_(2)O can be formed in the CH_(4)/air mixture in the presence of the GA due to kinetic effects,and the increase of OH and CH_(2)O shows the great potential of the GA for combustion enhancement.

Improved combustion stability of biogas at different CO_(2) concentrations using inhomogeneous partially premixed stratified flames

Biogas is a renewable and clean energy source that plays an important role in the current environment of lowcarbon transition.If high-content CO_(2) in biogas can be separated,transformed,and utilized,it not only realizes high-value utilization of biogas but also promotes carbon reduction in the biogas field.To improve the combustion stability of biogas,an inhomogeneous,partially premixed stratified(IPPS)combustion model was adopted in this study.The thermal flame structure and stability were investigated for a wide range of mixture inhomogeneities,turbulence levels,CO_(2) concentrations,air-to-fuel velocity ratios,and combustion energies in a concentric flow slot burner(CFSB).A fine-wire thermocouple is used to resolve the thermal flame structure.The flame size was reduced by increasing the CO_(2) concentration and the flames became lighter blue.The flame temperature also decreased with increase in CO_(2) concentration.Flame stability was reduced by increasing the CO_(2) concentration.However,at a certain level of mixture inhomogeneity,the concentration of CO_(2) in the IPPS mode did not affect the stability.Accordingly,the IPPS mode of combustion should be suitable for the combustion and stabilization of biogas.This should support the design of highly stabilized biogas turbulent flames independent of CO_(2) concentration.The data show that the lower stability conditions are partially due to the change in fuel combustion energy,which is characterized by the Wobbe index(WI).In addition,at a certain level of mixture inhomogeneity,the effect of the WI on flame stability becomes dominant.

Numerical Simulation of Flameless Premixed Combustion with an Annular Nozzle in a Recuperative Furnace

This paper reports an investigation of Computational Fluid Dynamics(CFD)on the influence of injection momentum rate of premixed air and fuel on the flameless Moderate or Intense Low oxygen Dilution(MILD) combustion in a recuperative furnace.Details of the furnace flow velocity,temperature,O2,CO2 and NOx concentrations are provided.Results obtained suggest that the flue gas recirculation plays a vital role in establishing the premixed MILD combustion.It is also revealed that there is a critical momentum rate of the fuel-air mixture below which MILD combustion does not occur.Moreover,the momentum rate appears to have less significant influence on conventional global combustion than on MILD combustion.

A novel method for chemistry tabulation of strained premixed/stratified flames based on principal component analysis

The principal component analysis （PCA） is used to analyze the high dimen- sional chemistry data of laminar premixed/stratified flames under strain effects. The first few principal components （PCs） with larger contribution ratios axe chosen as the tabu- lated scalars to build the look-up chemistry table. Prior tests show that strained premixed flame structure can be well reconstructed. To highlight the physical meanings of the tabu- lated scalars in stratified flames, a modified PCA method is developed, where the mixture fraction is used to replace one of the PCs with the highest correlation coefficient. The other two tabulated scalars are then modified with the Schmidt orthogonalization. The modified tabulated scalars not only have clear physical meanings, but also contain passive scalars. The PCA method has good commonality, and can be extended for building the thermo-chemistry table including strain rate effects when different fuels are used.

Injection Strategy in Natural Gas–Diesel Dual-Fuel Premixed Charge Compression Ignition Combustion under Low Load Conditions

Dual-fuel premixed charge compression ignition (DF-PCCI) combustion has been proven to be a viable alternative to conventional diesel combustion in heavy-duty compression ignition engines due to its low nitrogen oxides (NOx) and particulate matter (PM) emissions. When natural gas (NG) is applied to a DF-PCCI engine, its low reactivity reduces the maximum pressure rise rate under high loads. However, the NG–diesel DF-PCCI engine suffers from low combustion efficiency under low loads. In this study, an injection strategy of fuel supply (NG and diesel) in a DF-PCCI engine was investigated in order to reduce both the fuel consumption and hydrocarbon (HC) and carbon monoxide (CO) emissions under low load conditions. A variation in the NG substitution and diesel start of energizing (SOE) was found to effectively control the formation of the fuel–air mixture. A double injection strategy of diesel was implemented to adjust the local reactivity of the mixture. Retardation of the diesel pilot SOE and a low fraction of the diesel pilot injection quantity were favorable for reducing the combustion loss. The introduction of exhaust gas recirculation (EGR) improved the fuel economy and reduced the NOx and PM emissions below Euro VI regulations by retarding the combustion phasing. The combination of an NG substitution of 40%, the double injection strategy of diesel, and a moderate EGR rate effectively improved the combustion efficiency and indicated efficiency, and reduced the HC and CO emissions under low load conditions.

Flow characterization and dilution effects of N_2 and CO_2 on premixed CH_4/air flames in a swirl-stabilized combustor

Numerically-aided experimental studies are conducted on a swirl-stabilized combustor to investigate the dilution effects on flame stability, flame structure, and pollutant emissions of premixed CH4/air flames. Our goal is to provide a systematic assessment on combustion characteristics in diluted regimes for its application to environmentally-friendly approaches such as biogas combustion and exhanst-gas recirculation technology. Two main diluting species, N2 and CO2, are tested at various dilution rates. The results obtained by means of optical diagnostics show that five main flame regimes can be observed for Nz-diluted flames by changing excess air and dilution rate. CO2-diluted flames follow the same pattern evolution except that all the domains are shifted to lower excess air. Both N2 and CO2 dilution affect the lean blow- out （LBO） limits negatively. This behavior can be counter-balanced by reactant preheating which is able to broaden the flammability domain of the diluted flames. Flame reactivity is degraded by increasing dilution rate. Meanwhile, flames are thickened in the presence of both diluting species. NOx emissions are significantly reduced with dilution and proved to be relevant to flame stability diagrams： slight augmentation in NOx emission profiles is related to transitional flame states where instability occurs. Although dilution results in increase in CO emissions at certain levels, optimal dilution rates can still be proposed to achieve an ideal compromise.

Large eddy simulation of turbulent premixed and stratified combustion using flame surface density model coupled with tabulation method

Large eddy simulations(LESs) are performed to investigate the Cambridge premixed and stratified flames, SwB1 and SwB5, respectively. The flame surface density(FSD) model incorporated with two different wrinkling factor models, i.e., the Muppala and Charlette2 wrinkling factor models, is used to describe combustion/turbulence interaction, and the flamelet generated manifolds(FGM) method is employed to determine major scalars. This coupled sub-grid scale(SGS) combustion model is named as the FSD-FGM model. The FGM method can provide the detailed species in the flame which cannot be obtained from the origin FSD model. The LES results show that the FSD-FGM model has the ability of describing flame propagation, especially for stratified flames. The Charlette2 wrinkling factor model performs better than the Muppala wrinkling factor model in predicting the flame surface area change by the turbulence.The combustion characteristics are analyzed in detail by the flame index and probability distributions of the equivalence ratio and the orientation angle, which confirms that for the investigated stratified flame, the dominant combustion modes in the upstream and downstream regions are the premixed mode and the back-supported mode, respectively.

Inerting characteristics of entrained atomized water on premixed methane-air flame

A combustion tube experiment platform was designed and used to study the inerting conditions and capacity of entrained atomized water on premixed methane–air flame. The structure of a laminar flame of premixed methane–air gas and the process of interaction between atomized water and flame was recorded, and the rules of combustion velocity, stability and strength rate of laminar flame were experimentally studied. The inerting process and mechanism was analyzed, and the characteristics of inerting premixed methane–air gas within explosion limits by atomized water were acquired. The research results show that: for the premixed methane–air gas with a concentration of 7%, the minimum inerting atomized water flux is 20.8 m L/(m2min); for the premixed methane–air gas with a concentration of 9%, the minimum inerting atomized water flux is 32.9 m L/(m2min); for the premixed methane–air gas with a concentration of 11%, the minimum inerting atomized water flux is 44.6 m L/(m2min). The research results are significant for extinguishing methane flame and inhibiting of methane explosion using atomized water.

Experimental Investigation of Flame Structure and Combustion Limit During Premixed Methane/Air Jet Flame and Sidewall Interaction

The effects of inlet gas parameters and sloping sidewall angle on the flame structure and combustion limit with and without sidewall were experimentally investigated.Flame height and impact angle were obtained by chemiluminescence intensity analysis of CH*distribution.First,the combustion characteristics of flame with and without sidewall at different equivalence ratios were explored;then,the influence of Reynolds number and inlet gas temperature on flame structure and combustion limit of v-shaped flame with sidewall were analyzed,and the results with sidewall were compared with those without sidewall.Finally,the variation trend of flame parameters with different sloping sidewall angles was analyzed.The experimental results show that the existence of sidewall makes flame shape change from“M-shaped”to“inverted N-shaped”,and conical shape to trapezoidal shape.The inhibition effect of sidewall on flame stretching downstream is strengthened with the increase in Reynolds number;but as the temperature of the inlet gas increases,the inhibitory effect is obviously weakened.When sloping sidewall angle decreases from 90°to 55°at 5°intervals,flame height and impact angle of v-shaped flame reach the extreme value whenβ=80°.Compared with the case without sidewall,the range of v-shaped flame with sidewall has no obvious trend of broadening or shrinking when inlet gas temperature is increased;however,as sloping sidewall angle decreases,the range of the v-shaped flame shrinks obviously and flammability limit increases significantly.

A Novel Reagentless Biosensor Constructed by Layer-by-Layer Assembly of HRP and Nile Blue Premixed with Polyanion

A novel reagentless biosensor constructed by the organic dye nile blue (NB) and horseradish peroxidase (HRP) has been fabricated via layer-by-layer (LBL) self-assembly technique. NB premixed with polyanion poly (sodium-p-styrenesulfonate) (PSS) acts as the mediator between the immobilized HRP and the electrode surface. The response of the biosensor to hydrogen peroxide has been investigated. The linear range of the biosensor to hydrogen peroxide was from 0.20 mmol/L to 7.03 mmol /L with a sensitivity of 8.45 μA/(mmol/L).

Evaluation of the Local Burning Velocity Using DNS Data of Turbulent Premixed Flames

The local burning velocity, which is based on the consumption rate of the unburned mixture, is one of the dominant parameters in turbulent premixed flames. In this study, the evaluating method of the local burning velocity was investigated using DNS data of turbulent premixed flames with different Lewis numbers. The local burning velocity was evaluated by integrating the chemical reaction rates along normal to the flame surface within three kinds of integration ranges that were defined as follows: the range which is defined by the half length of normal to the flame surface between its certain point and the other point crossing the flame surface (Range 1);the range which is defined by the reaction progress variable that the chemical reaction rate along normal to a planer flame surface takes a half of the maximum value (Range 2);the range which is defined by the length of normal to the flame surface between its certain point and the point which has the extreme value of the reaction progress variable (Range 3). As a result, Range 1 and Range 2 were affected by the flame shapes greatly, since the quantities of the integration ranges fluctuated widely dependent on the variations of turbulent premixed flames. Under the conditions of the turbulent combustion in this study, Range 3, which is hardly affected by a flame shape, is considered to be appropriate to the evaluation of the local burning velocity.

Consideration on the Flow Velocity in the Experimental Analysis of the Flame Displacement Speed Using DNS Data of Turbulent Premixed Flames with Different Lewis Numbers

The flame displacement speed is one of the major characteristics in turbulent premixed flames. The flame displacement speed is experimentally obtained from the displacement normal to the flame surface, while it is numerically evaluated by the transport equation of the flame surface. The flame displacement speeds obtained both experimentally and numerically cannot be compared directly because their definitions are different. In this study, two kinds of experimental flame displacement speeds—involving the mean inflow velocity and the local flow velocity—were simulated using the DNS data with the different Lewis numbers, and were compared with the numerical flame displacement speed. The simulated experimental flame displacement speed involving the mean inflow velocity had no correlation with the numerical flame displacement speed, while the simulated displacement speed involving the local flow velocity had a clear correlation with the numerical displacement speed in the cases of higher Lewis number than unity. The correlation coefficient of the simulated displacement speed involving the local flow velocity with the numerical displacement speed had a maximum value on the isosurface of the reaction progress variable with the maximum temperature gradient where the dilation effect of the flame is strongest.

Saudi Consensus for Low-Premixed Insulin Analogues in Type 2 Diabetes: Consensus Report

Dear Dr. Martin Hovland, We learned from the literature that premixed insulins are short-acting insulin or rapid-acting insulin analogue mixed with intermediate-acting insulin in a fixed ratio, addressing FBG and PPBG in one injection. There are two categories;high-mix and low-mix premixed insulins. We, a Saudi task force, gathered to develop an explicit, evidence-based consensus for the use of the low-mix premixed insulin for better glycemic control. The treatment with premixed aspart 30 was non-inferior to treatment with premixed insulin lispro 25. In addition, Self-monitored blood glucose levels were comparable. Safety profiles were similar between both treatments, as was the incidence of hypoglycemic episodes. The switch between both products of the low-mix family can be carried out without any problem. Both products of the low-mix premixed insulin analogues aspart 30/70 and premixed insulin lispro 25/75 have comparable efficacy and safety as shown from the medical literature. Therefore, we can change from one to another safely as demonstrated by the US FDA statement. In addition, the ergonomic features of KwikPen’s design and function may offer important advantages for the user during insulin administration.

DNS Analysis on the Indirect Relationship between the Local Burning Velocity and the Flame Displacement Speed of Turbulent Premixed Flames

The local burning velocity and the flame displacement speed are the dominant properties in the mechanism of turbulent premixed combustion. The flame displacement speed and the local burning velocity have been investigated separately, because the flame displacement speed can be used for the discussion of flame-turbulence interactions and the local burning velocity can be used for the discussion of the inner structure of turbulent premixed flames. In this study, to establish the basis for the discussion on the effects of turbulence on the inner structure of turbulent premixed flames, the indirect relationship between the flame displacement speed and the local burning velocity was investigated by the flame stretch, the flame curvature, and the tangential strain rate using DNS database with different density ratios. It was found that for the local tangential strain rate and the local flame curvature, the local burning velocity and the flame displacement speed had the opposite correlations in each density ratio case. Therefore, it is considered that the local burning velocity and the flame displacement speed have a negative correlation.

Numerical investigation of optimal geometry parameters for ejectors of premixed burner

An ejector of low NO~ burner was designed for a gas instantaneous water heater in this work. The flowing and mixing process of the ejector was investigated by computational fluid dynamics （CFD） approach. A comprehensive study was conducted to understand the effects of the geometrical parameters on the static pressure of air and methane, and mole fraction uniformity of methane at the outlet of ejector. The distribution chamber was applied to balance the pressure and improve the mixing process of methane and air in front of the fire hole. A distribution orifice plate with seven distribution orifices was introduced at the outlet of the ejector to improve the flow organization. It is found that the nozzle exit position of 5 mm and nozzle diameter d 〉1.3 mm should be used to improve the flow organization and realize the well premixed combustion for this designed ejector.

Research on Premixed Abrasive Jet Derusting Machine

The structure, working principles, and main technological parameters of the premajet derusting machine are introduced. Experiments were made to test the relationship among such jet parameters as working pressure, rate of water flow, abrasive weight consistency and derusting efficiency. Reasonable parameters were decided. Results prove that the derusting machine is characterized by its high derusting efficiency (as high as 20m 2/h), good derusting quality (as good as ISO8501 1 Sa 2.5), and low specific power consumption (about 0.3kW·h/m 2). Therefore it is a new type of high efficiency derusting machine.

Experimental Study of Premixed Stoichiometric Ethylene/Oxygen/Argon Flame

A comprehensive experimental study of the premixed ethylene/oxygen/argon flame at 2.667 kPa with a stoichiometric equivalence ratio （Ф=1） was performed with the tunable synchrotron photoionization and molecular-beam sampling mass spectrometry techniques. The isomers of most observed species in the flame were unambiguously identified by measurements of the photoionization etticiency spectra, e.g. C3H4, C2H4O and C4H4. The mole fraction profiles of species up to C7H8 were measured by scanning the burner position at the selected photon energies near ionization thresholds, and the flame temperature profile was obtained by using Pt/Pt-13%Rh thermocouple. Compared with the previous studies, a lot of new flame species： C3H2, C3H3, C3H5, C2H6O, C4H2, C4H4, C4H6, C3H4O, C3H6O, C3H8O, C5H6, C4H8O and C7H8, were observed. A series of free radicals in the flame are detected to be CH3, C2H3, C2H5, HCO, C3H3 and C3H5. Based on the experimental work, a reduced reaction mechanism was developed including 40 species and 223 reactions. Modeling and measurements agree well for the major species and most intermediates. A detailed kinetic model is desired for this flame.

Propagating Characteristic of Premixed Methane-Oxygen Deflagration in the Coal Mine Lane Including a Refuge Chamber

In order to investigate detonation propagation and distribution problems of premixed CH_4 ＋ 2O_2 mixture around a concrete structure such as a refuge chamber,detonation experiments in one small size tube were conducted. A simulation method was developed to obtain the flow field load distribution in the coal mine lane and pressure load of each part for the refuge chamber. Firstly,a physical model of a full-size explosiontest lane was established,which included the refuge chamber. With the calculations of the exact initial detonation pressure,the propagation characteristics of CH_4 ＋ 2O_2 premixed mixture detonation in the lane was simulated. Simulation results of various parts from AUTODYN are recorded,and the shock wave arrival time and the pressure peak can be observed from the detonation pressure-time curve over the changing propagation distance. So curve differences in different locations cannot be ignored. Then by detonation experiments in the small size tube,detonation pressure-time curves and velocity were obtained. Finally the simulation waveform of variation curve agreed well with the experimental results,which validated the detonation simulation method. The difference between shockwaves of the two sensors confirmed that detonation wave changed along with distance and time. These results should be taken into serious consideration for the detonation progration and distribution problem in future researches.

Research on the Mechanism of Abrasive Particles Accelerated and a Cutting System of a Premixed Abrasive Jet

Forces acting on abrasive in the process of speeding up have been analyzed. Motion differential equation of abrasive in a pipeline and nozzle has been given, respectively. Mechanisms of abrasive particles accelerated in a premixed abrasive jet has been analyzed. The study shows that driven by high-pressure water, velocity of an abrasive is near to velocity of water in pipeline through the acceleration distance. In the taper section of a nozzle, water and abrasive particles are greatly accelerated at the same time. But velocity of an abrasive always lags behind velocity of water. A premixed abrasive jet cutting system has been introduced. The structure and working principles of the system have been given. The system is an assembly of abrasive screening and filling. By use of the premixed abrasive jet cutting system established, cutting experiments have been made to test the main parameters which influence the cutting performances such as working pressure, standoff and traverse velocity, and the nozzle diameter affecting cutting chink width.

Therapeutic effect of premixed insulin regimen and triple plus one combined therapy on type 2 diabetes

Objective:To analyze the level of blood glucose fluctuation and the time of blood glucose reaching the standard in the treatment of type 2 diabetes mellitus with premixed insulin regimen and three plus one intensive hypoglycemic regimen.Methods:A total of 120 patients with type 2 diabetes who were admitted to our hospital from April 2017 to April 2018 were divided into observation group and control group according to random number method,with 60 cases in each group.Patients in the control group were given insulin asparagus injection before breakfast and dinner,while patients in the observation group were given insulin Laipu injection before three meals combined with insulin glargine injection before bedtime.The insulin dosage,blood glucose compliance time,SDBG,CV,and quartile blood glucose fluctuation range were compared between the two groups.IQR,PPGE and other indicators of blood glucose fluctuations.Results:After treatment,the insulin dosage and blood glucose compliance time of the observation group were significantly lower than those of the control group(P<0.05).There was no significant difference in the incidence of hypoglycemia between the two groups(P>0.05).The SDBG,IQR,and PPGE of the day were significantly lower(P<0.05),and the CV was significantly higher(P<0.05).After two days of blood glucose compliance,the serum levels of SDBG,CV,IQR,and PPGE were significantly lower in the observation group than those in the control group(P<0.05).Conclusions:Compared with the premixed insulin regimen,the three plus one intensive hypoglycemic regimen has a better effect on controlling blood sugar fluctuation in type 2 diabetes mellitus,and the time for blood sugar to reach the standard is relatively short,and also the incidence of hypoglycemia is relatively low.Hence,it is worth popularizing in clinical practice.