Particle residence time distribution and axial dispersion coefficient in a pressurized circulating fluidized bed by using multiphase particle-in-cell simulation

The particle residence time distribution(RTD)and axial dispersion coefficient are key parameters for the design and operation of a pressurized circulating fluidized bed(PCFB).In this study,the effects of pressure(0.1-0.6 MPa),fluidizing gas velocity(2-7 m·s^(-1)),and solid circulation rate(10-90 kg·m^(-2)·s^(-1))on particle RTD and axial dispersion coefficient in a PCFB are numerically investigated based on the multiphase particle-in-cell(MP-PIC)method.The details of the gas-solid flow behaviors of PCFB are revealed.Based on the gas-solid flow pattern,the particles tend to move more orderly under elevated pressures.With an increase in either fluidizing gas velocity or solid circulation rate,the mean residence time of particles decreases while the axial dispersion coefficient increases.With an increase in pressure,the core-annulus flow is strengthened,which leads to a wider shape of the particle RTD curve and a larger mean particle residence time.The back-mixing of particles increases with increasing pressure,resulting in an increase in the axial dispersion coefficient.

Effects of pressure on flow characteristics in a pressurized circulating fluidized bed

The effects of operating pressure on the gas-solid flow characteristics in a pressurized circulating fluidized bed(CFB)gasification system were studied by experiment and simulation.Elevated operating pressure was found to increase the particle uniformity in the axial and radial directions.Experiments and simulations both showed that as the operating pressure increased,the pressure drops along the riser height decreased.The experimental pressure drops at the same locations decreased when the operating pressure increased,but the opposite trend was observed in the simulation results.A proper drag model must be developed for the accurate simulation of pressurized CFB operation,and the accuracy of electrical capacitance tomography(ECT)measurement and cross-correlation analysis should be improved for better prediction of the particle circulation flux.

Genetic climatic regionalization of the Balkan Peninsula using cluster analysis

Sea Level Pressure（SLP） data for the period 1950–2012 at 61 stations located in or around the Balkan Peninsula was used. The main concept is that intra-annual course of SLP represents the best different air masses that are situated over the Balkan Peninsula during the year. The method for differentiation of climatic zones is cluster analysis. A hierarchical clustering technique–average linkage between groups with Pearson correlation for measurement of intervals was employed in the research. The climate of the Balkan Peninsula is transitional between oceanic and continental and also between subtropical and temperate climates. Several major changes in atmospheric circulation over the Balkan Peninsula have happened over the period 1950–2012. There is a serious increase of the influence of the Azores High in the period January–Marchwhich leads to an increase of SLP and enhances oceanic influence. There is an increase of the influence of the north-west extension of the monsoonal low in the period June–September. This leads to more continental climatebut also to more tropical air masses over the Balkan Peninsula. Accordinglythe extent of subtropical climate widens in northern direction. There is an increase of the influence of the Siberian High in the period October–December. This influence covers central and eastern part of the peninsula in October and Novemberand it reaches western parts in December. Thusthe climate becomes more continental.