The dynamic spalling characteristics of rock are important for stability analysis in rock engineering.This paper presented an experimental investigation on the dynamic spalling characteristics of granite with differen...The dynamic spalling characteristics of rock are important for stability analysis in rock engineering.This paper presented an experimental investigation on the dynamic spalling characteristics of granite with different temperatures and strain rates.A series of dynamic spalling tests with different impact velocities were conducted on thermally treated granite at different temperatures.The dynamic spalling strengths of granite with different temperatures and strain rates were determined.A model was proposed to correlate the dynamic spalling strength of granite,high temperature and strain rate.The results show that the spalling strength of granite decreases with increasing temperature.Moreover,the spalling strength of granite with a higher strain rate is larger than that with a lower strain rate.The proposed model can describe the relationship among dynamic spalling strength of granite,high temperature and strain rate.展开更多
In pressurized water reactor(PWR),fretting wear is one of the main causes of fuel assembly failure.Moreover,the operation condition of cladding is complex and harsh.A unique fretting damage test equipment was develope...In pressurized water reactor(PWR),fretting wear is one of the main causes of fuel assembly failure.Moreover,the operation condition of cladding is complex and harsh.A unique fretting damage test equipment was developed and tested to simulate the fretting damage evolution process of cladding in the PWR environment.It can simulate the fretting wear experiment of PWR under different temperatures(maximum temperature is 350℃),displacement amplitude,vibration frequency,and normal force.The fretting wear behavior of Zr-4 alloy under different temperature environments was tested.In addition,the evolution of wear scar morphology,profile,and wear volume was studied using an optical microscope(OM),scanning electron microscopy(SEM),and a 3D white light interferometer.Results show that higher water temperature evidently decreased the cladding wear volume,the wear mechanism of Zr-4 cladding changed from abrasive wear to adhesive wear and the formation of an oxide layer on the wear scar reduced the wear volume and maximum wear depth.展开更多
The properties of urea under high pressure and high temperature(HPHT) are studied using a China-type large volume cubic high-presentation apparatus(CHPA)(SPD-6 × 600).The samples are characterized by scanning ele...The properties of urea under high pressure and high temperature(HPHT) are studied using a China-type large volume cubic high-presentation apparatus(CHPA)(SPD-6 × 600).The samples are characterized by scanning electron microscopy(SEM), x-ray diffraction(XRD), and Raman spectroscopy.By directly observing the macroscopic morphology of urea with SEM, it is confirmed that the melting point of urea rises with the increase of pressure.The XRD patterns of urea residues derived under different pressures show that the thermal stability of urea also increases with the increase of pressure.The XRD pattern of the urea residue confirms the presence of C3H5N5O(ammeline) in the residue.A new peak emerges at 21.80°, which is different from any peak of all urea pyrolysis products under normal pressure.A more pronounced peak appears at 708 cm^-1 in the Raman spectrum, which is produced by C-H off-plane bending.It is determined that the urea will produce a new substance with a C-H bond under HPHT, and the assessment of this substance requires further experiments.展开更多
Temperature and pressure play key roles in Global Navigation Satellite System(GNSS) precipitable water vapor(PWV) retrieval. The National Aeronautics and Space Administration(NASA) and European Center for Medium-Range...Temperature and pressure play key roles in Global Navigation Satellite System(GNSS) precipitable water vapor(PWV) retrieval. The National Aeronautics and Space Administration(NASA) and European Center for Medium-Range Weather Forecasts(ECMWF) have released their latest reanalysis product: the modern-era retrospective analysis for research and applications, version 2(MERRA-2) and the fifthgeneration ECMWF reanalysis(ERA5), respectively. Based on the reanalysis data, we evaluate and analyze the accuracy of the surface temperature and pressure products in China using the the measured temperature and pressure data from 609 ground meteorological stations in 2017 as reference values.Then the accuracy of the two datasets and their performances in estimating GNSS PWV are analyzed. The PWV derived from the pressure and temperature products of ERA5 and MERRA-2 has high accuracy. The annual average biases of pressure and temperature for ERA5 are-0.07 hPa and 0.45 K, with the root mean square error(RMSE) of 0.95 hPa and 2.04 K, respectively. The annual average biases of pressure and temperature for MERRA-2 are-0.01 hPa and 0.38 K, with the RMSE of 1.08 h Pa and 2.66 K, respectively.The accuracy of ERA5 is slightly higher than that of MERRA-2. The two reanalysis data show negative biases in most regions of China, with the highest to lowest accuracy in the following order: the south,north, northwest, and Tibet Plateau. Comparing the GNSS PWV calculated using MERRA-2(GNSS MERRA-2 PWV) and ERA5(GNSS ERA5 PWV) with the radiosonde-derived PWV from 48 co-located GNSS stations and the measured PWV of the co-location radiosonde stations, it is found that the accuracy of GNSS ERA5 PWV is better than that of GNSS MERRA-2 PWV. These results show the different applicability of surface temperature and pressure products from MERRA-2 and ERA5 data, indicating that both have important applications in meteorological research and GNSS water vapor monitoring in China.展开更多
Diamond crystallization was carried out with CH4N2S additive in the FeNiCo-C system at pressure 6.0 GPa and temperature ranging from 1290 ℃ to 1300 ℃. The crystallization qualities of the synthetic crystals were cha...Diamond crystallization was carried out with CH4N2S additive in the FeNiCo-C system at pressure 6.0 GPa and temperature ranging from 1290 ℃ to 1300 ℃. The crystallization qualities of the synthetic crystals were characterized by Raman spectra and the Raman peaks located at 1331 cm-1. Fourier transform infrared (FTIR) results showed that the hydrogen-related absorption peak of the as-grown diamond was at 2920 cm-1, respectively. Interestingly, A-center nitrogen was observed in the obtained diamond and the characteristic absorption peaks located at 1095 cm-1 and 1282 cm-1. Especially, the absorption peak at 1426 cm-1 attributing to the aggregation B-center nitrogen defect was distinctly found when the CH4N2S content reached 0.3 mg in the synthesis system, which was extremely rare in synthetic diamond. Furthermore, optical color centers in the synthesized crystals were investigated by photoluminescence (PL).展开更多
To investigate the porosity, permeability and rock mechanics of deep shale under temperature-pressure coupling, we selected the core samples of deep shale from the Lower Silurian Longmaxi Formation in the Weirong and ...To investigate the porosity, permeability and rock mechanics of deep shale under temperature-pressure coupling, we selected the core samples of deep shale from the Lower Silurian Longmaxi Formation in the Weirong and Yongchuan areas of the Sichuan Basin for porosity and permeability experiments and a triaxial compression and sound wave integration experiment at the maximum temperature and pressure of 120 ℃ and 70 MPa. The results show that the microscopic porosity and permeability change and the macroscopic rock deformation are mutually constrained, both showing the trend of steep and then gentle variation. At the maximum temperature and pressure, the porosity reduces by 34%–71%, and the permeability decreases by 85%–97%. With the rising temperature and pressure, deep shale undergoes plastic deformation in which organic pores and clay mineral pores are compressed and microfractures are closed, and elastic deformation in which brittle mineral pores and rock skeleton particles are compacted. Compared with previous experiments under high confining pressure and normal temperature,the experiment under high temperature and high pressure coupling reveals the effect of high temperature on stress sensitivity of porosity and permeability. High temperature can increase the plasticity of the rock, intensify the compression of pores due to high confining pressure, and induce thermal stress between the rock skeleton particles, allowing the reopening of shale bedding or the creation of new fractures along weak planes such as bedding, which inhibits the decrease of permeability with the increase of temperature and confining pressure. Compared with the triaxial mechanical experiment at normal temperature, the triaxial compression experiment at high temperature and high pressure demonstrates that the compressive strength and peak strain of deep shale increase significantly due to the coupling of temperature and pressure. The compressive strength is up to 435 MPa and the peak strain exceeds 2%, indicating that high temperature is not conducive to fracture initiation and expansion by increasing rock plasticity. Lithofacies and mineral composition have great impacts on the porosity, permeability and rock mechanics of deep shale. Shales with different lithologies are different in the difficulty and extent of brittle failure. The stress-strain characteristics of rocks under actual geological conditions are key support to the optimization of reservoir stimulation program.展开更多
In order to investigate the problem of long-term strength retrogression in oil well cement systems exposed to high pressure and high temperature(HPHT)curing conditions,various influencing factors,including cement sour...In order to investigate the problem of long-term strength retrogression in oil well cement systems exposed to high pressure and high temperature(HPHT)curing conditions,various influencing factors,including cement sources,particle sizes of silica flour,and additions of silica fume,alumina,colloidal iron oxide and nano-graphene,were investigated.To simulate the environment of cementing geothermal wells and deep wells,cement slurries were directly cured at 50 MPa and 200?C.Mineral compositions(as determined by X-ray diffraction Rietveld refinement),water permeability,compressive strength and Young’s modulus were used to evaluate the qualities of the set cement.Short-term curing(2e30 d)test results indicated that the adoption of 6 m m ultrafine crystalline silica played the most important role in stabilizing the mechanical properties of oil well cement systems,while the addition of silica fume had a detrimental effect on strength stability.Long-term curing(2e180 d)test results indicated that nano-graphene could stabilize the Young’s modulus of oil well cement systems.However,none of the ad-mixtures studied here can completely prevent the strength retrogression phenomenon due to their inability to stop the conversion of amorphous to crystalline phases.展开更多
In this paper,diamond/CuCr and diamond/CuB composites were prepared using the pressure infiltration method.The physical property measurement system(PPMS)was adopted to evaluate the thermal conductivity of diamond/Cu a...In this paper,diamond/CuCr and diamond/CuB composites were prepared using the pressure infiltration method.The physical property measurement system(PPMS)was adopted to evaluate the thermal conductivity of diamond/Cu and MoCu composites within the range of100–350 K,and a scanning electron microscope(SEM)was utilized to analyze the microstructure and fracture appearance of the materials.The research indicates that the thermal conductivity of diamond/Cu composite within the range of100–350 K is 2.5–3.0 times that of the existing MoCu material,and the low-temperature thermal conductivity of diamond/Cu composite presents an exponential relationship with the temperature.If B element was added to a Cu matrix and a low-temperature binder was used for prefabricated elements,favorable interfacial adhesion,relatively high interfacial thermal conductivity,and favorable low-temperature heat conduction characteristics would be apparent.展开更多
Fluctuations in outer space's temperature would affect the spacecraft's regular operation.This paper aims to study the temperature influences of the aluminum honeycomb buffer in the tether-net launcher.Firstly...Fluctuations in outer space's temperature would affect the spacecraft's regular operation.This paper aims to study the temperature influences of the aluminum honeycomb buffer in the tether-net launcher.Firstly,a buffer structure was designed to attenuate the pyroshock generated by the pyrotechnic device.Secondly,the mechanical properties of aluminum honeycomb at different temperatures were obtained through quasi-static compression experiments.Then,the internal ballistic responses of the launcher were gained by the closed bomb tests and the equivalent classical interior ballistic model.Finally,the recoil performance of the launcher with aluminum honeycomb buffer at different temperatures was studied.It is revealed that the aluminum honeycomb crushing force gradually decreases with the temperature increases.The peak pressure,burning rate coefficient and velocity increase while the peak time decreases with the temperature increase for the interior ballistics.For the launcher recoil responses,the average launch recoil decreases if the aluminum honeycomb doesn't enter the dense stage.The impact acceleration,projectile velocity and displacement increase as the temperature increase.The paper spotlights the temperature's influence on the recoil characteristics of the aluminum honeycomb buffer,which provides a new idea for buffering technology of pyrotechnic devices in a complex space environment.展开更多
The enclosed organic matter chiefly releases lower carbon\|number n\|alkanes under high temperature and high pressure, while the kerogen mainly produces higher carbon\|number n\|alkanes. The residual hydrocarbons gene...The enclosed organic matter chiefly releases lower carbon\|number n\|alkanes under high temperature and high pressure, while the kerogen mainly produces higher carbon\|number n\|alkanes. The residual hydrocarbons generated by both kerogen and enclosed organic matter in the Tieling limestone contain abundant tricyclic terpanes, pentacyclic triterpanes and steranes, but the contents of tetracyclic terpanes and 25\|norhopane are lower. The residual enclosed organic matter shows the same distribution characteristics of n\|alkanes, steranes and terpanes as that of the original bitumen A, i.e., the higher contents of triterpanes and tetracyclic terpanes, the higher ratios of 25\|norhopanes over regular hopanes and markedly degraded steranes. By comparing the residual hydrocarbon, residual enclosed organic matter and original enclosed organic matter, it can be concluded that steranes and terpanes in the residual hydrocarbons are produced mainly by the kerogen and subordinately by the residual enclosed organic matter, the steranes and terpanes do not enter into the residual enclosed organic matter, and the thermal evolution of the residual enclosed organic matter maintains its unique character. Furthermore, pressure retards the pyrolysis of higher carbon\|number alkanes and influences the isomerization ratios of C\-\{29\}\|steranes, making 20S/(20S+20R) lower under the higher pressure than that under lower pressure. Higher pressure retards the thermal evolution of organic matter.展开更多
In order to investigate the behavior characteristics of asphalt components during the process of nano-cracks temperature self-healing(NTS),molecular simulation technology was used to simulate the temperature self-heal...In order to investigate the behavior characteristics of asphalt components during the process of nano-cracks temperature self-healing(NTS),molecular simulation technology was used to simulate the temperature self-healing of asphalt.Based on the determination of asphalts(virgin asphalt and aged asphalt),the proportional changes of asphalt components were confirmed.The distribution characteristics of asphalt components were obtained by marking different components in the process of NTS.At the same time,the rationality of the micro simulation findings was confirmed by asphalt performance tests and infrared spectroscopy results.The results show that different asphalt components have different behavior characteristics in the process of NTS.The content of asphaltene and resin plays a key role in the process of NTS,while saturation and aromatics play an active role in the temperature self-healing before and after aging.The NTS is the result of the comprehensive action of different components,and the self-healing efficiency is proportional to the relative molecular mass.The effect of aging on the NTS is also realized by changing the proportion of asphalt components.展开更多
Air channeling in the annulus between the casing and the cement sheath and/or between the cement sheath and formation is the main factor affecting the safe operation of natural gas wells at high temperatures and press...Air channeling in the annulus between the casing and the cement sheath and/or between the cement sheath and formation is the main factor affecting the safe operation of natural gas wells at high temperatures and pressures.Prevention of this problem requires,in general,excellent anti-channeling performances of the cement sheath.Three methods to predict such anti-channeling performances are proposed here,which use the weightless pressure of cement slurry,the permeability of cement stone and the volume expansion rate of cement sheath as input parameters.Guided by this approach,the anti-channeling performances of the cement slurry are evaluated by means of indoor experiments,and the cement slurry is optimized accordingly.The results show that the dangerous transition time of the cement slurry with optimized dosage of admixture is only 76 min,the permeability of cement stone is 0.005 md,the volume shrinkage at final setting is only 0.72%,and the anti-channeling performances are therefore maximized.The effective utilization of the optimized cement slurry in some representative wells(LD10–1-A1 and LD10–1-A2 in LD10–1 gas field)is also discussed.展开更多
Atmospheric pressure plasma jet shows great potential for polymer film processing. The electrode geometry is the key factor to determine discharge characteristics and film modification of jets. In this paper, we compa...Atmospheric pressure plasma jet shows great potential for polymer film processing. The electrode geometry is the key factor to determine discharge characteristics and film modification of jets. In this paper, we compared the discharge characteristics and the film modifications of atmospheric pressure plasma jets with needle-ring electrode(NRE) and doublering electrode(DRE). The results show that jet with NRE has stronger electric field intensity and higher discharge power,making it present more reactive oxygen particles and higher electron temperature, but its discharge stability is insufficient.In contrast, the jet with DRE has uniform electric field distribution of lower field intensity, which allows it to maintain stable discharge over a wide range of applied voltages. Besides, the modification results show that the treatment efficiency of PET film by NRE is higher than that by DRE. These results provide a suitable atmospheric pressure plasma jets device selection scheme for polymer film processing process.展开更多
Silicon carbide(SiC)is a high-performance structural ceramic material with excellent comprehensive properties,and is unmatched by metals and other structural materials.In this paper,raw SiC powder with an average grai...Silicon carbide(SiC)is a high-performance structural ceramic material with excellent comprehensive properties,and is unmatched by metals and other structural materials.In this paper,raw SiC powder with an average grain size of 5μm was sintered by an isothermal-compression process at 5.0 GPa and 1500?C;the maximum hardness of the sintered samples was31.3 GPa.Subsequently,scanning electron microscopy was used to observe the microscopic morphology of the recovered SiC samples treated in a temperature and extended pressure range of 0-1500?C and 0-16.0 GPa,respectively.Defects and plastic deformation in the SiC grains were further analyzed by transmission electron microscopy.Further,high-pressure in situ synchrotron radiation x-ray diffraction was used to study the intergranular stress distribution and yield strength under non-hydrostatic compression.This study provides a new viewpoint for the sintering of pure phase micron-sized SiC particles.展开更多
A theoretical study based on the Penalty factor(PF)method by Cavallini et al.is conducted to show that the pressure drop occurring in a wire-on-tube heat exchanger can be converted into a temperature difference for tw...A theoretical study based on the Penalty factor(PF)method by Cavallini et al.is conducted to show that the pressure drop occurring in a wire-on-tube heat exchanger can be converted into a temperature difference for two types of refrigerants R-134a and R-600a typically used for charging refrigerators and freezers.The following conditions are considered:stratified or stratified-wavyflow condensation occurring inside the smooth tube of a wire-on-tube condenser with diameter 3.25,4.83,and 6.299 mm,condensation temperatures 35℃,45℃,and 54.4℃ and cover refrigerant massflow rate spanning the interval from 1 to 7 kg/hr.The results show that the PF variation is not linear with vapor quality and attains a maximum when the vapor quality is 0.2 and 0.18 for the R-134a and R-600a refrigerants,respectively.The PF increases with the refrigerant massflow rate if the inner diameter and saturation temperature constant,and it decreases on increasing the inner diameter to 6.299 mm for constant refrigerant massflow rate and saturation temperature.The PF for R-600a is higher than that for R-134a due to the lower saturation pressure in thefirst case.Furthermore,a stratifiedflow produces higher PF in comparison to the annularflow due to the effect of the surface tension.展开更多
The mechanical behavior of the test string in deep wells is generally relatively complex as a result of the high temperature and high pressure,severe dogleg and buckling effects,which in some circumstances can even le...The mechanical behavior of the test string in deep wells is generally relatively complex as a result of the high temperature and high pressure,severe dogleg and buckling effects,which in some circumstances can even lead to string failure.Traditional computational methods for the analysis of these behaviors are often inaccurate.For this reason,here a more accurate mechanical model of the test string is introduced by considering variables such as temperature,pressure,wellbore trajectory,and buckling,as well as combining them with the deformation and string constraint conditions brought in by changes in temperature and pressure during the tripping,setting,and test operations.The model is validated by applying it to a specific high-pressure gas well(located in Northeast Sichuan).展开更多
Buildings are always affected by frost heave and thaw settlement in cold regions,even where saline soil is present.This paper describes the triaxial testing results of frozen silty clay with high salt content and exam...Buildings are always affected by frost heave and thaw settlement in cold regions,even where saline soil is present.This paper describes the triaxial testing results of frozen silty clay with high salt content and examines the in-fluence of confining pressure and temperature on its mechanical characteristics.Conventional triaxial compression tests were conducted under different confining pressures(0.5–7.0 MPa)and temperatures(-6℃,-8℃,-10℃,and-12℃).The test results show that when the confining pressure is less than 1 MPa,the frozen saline silty clay is dominated by brittle behavior with the X-shaped dilatancy failure mode.As the confining pressure increases,the sample gradually transitions from brittle to plastic behavior.The strength of frozen saline silty clay rises first and then decreases with increasing confining pressure.The improved Duncan-Chang hyperbolic model can describe the stress-strain relationship of frozen saline silty clay.And the parabolic strength criterion can be used to describe the strength evolution of frozen saline silty clay.The function relation of strength parameters with temperature is obtained by fitting,and the results of the parabolic strength criterion are in good agreement with the experimental results,especially when confining pressure is less than 5 MPa.Therefore,the study has important guiding significance for design and construction when considering high salinity soil as an engineering material in cold regions.展开更多
[Objectives]To investigate the effects of different temperature and starvation stress on the expression of AaHsp90 and reveal the molecular mechanism of adaptation to environment in Antheraea assama.[Methods]Taking th...[Objectives]To investigate the effects of different temperature and starvation stress on the expression of AaHsp90 and reveal the molecular mechanism of adaptation to environment in Antheraea assama.[Methods]Taking the normal feeding group at 26℃as the control,the expression change of AaHsp90 was detected by real-time PCR in midgut,fat body and hemlymph after high temperature stress at 38℃,low temperature stress at 4℃and starvation stress separately for different time on the third day of the fifth larvae.[Results]The expression of AaHsp90 in midgut,fat body and hemlymph of Antheraea assama were increased obviously at first and then decreased sharply with the prolongation of treatment time at 38℃.There has a certain inhibitory effect on the expression of AaHsp90 in midgut,fat body and hemolymph after treatment with 4℃for different time.After treatment with starvation,the AaHsp90 expression were increased at 12 and 18 h and decreased sharply at 24 h in midgut,fat body and hemolymph of A.assama.[Conclusions]Comprehensive analysis showed that high temperature and starvation stress can induce the expression of AaHsp90,while low temperature stress mainly suppressed its expression.It was suggested that the AaHsp90 protein may play an important role in the process of adaptation to high temperature and starvation stress in A.assama.展开更多
Using meteorological data from 8 national basic meteorological observation stations in Qingyang City of Longdong region from 1972 to 2021,the causes and change characteristics of high-temperature weather were analyzed...Using meteorological data from 8 national basic meteorological observation stations in Qingyang City of Longdong region from 1972 to 2021,the causes and change characteristics of high-temperature weather were analyzed,and targeted countermeasures and suggestions were proposed for residents' production,life,and energy security supply affected by high-temperature weather.The results showed that①affected by global warming,the annual average temperature,annual average maximum temperature,annual extreme maximum temperature,days of daily maximum temperature≥30℃,and days of daily maximum temperature≥35℃in Longdong region were all showing an upward trend;②due to the different terrain and soil properties of the underlying surface,the increase in high temperature weather varied in different regions.Due to the influence of desert and hilly terrain,the frequency and days of high temperature occurrence were relatively high in the central and northern parts of Qingyang City.Due to the climate regulation of the Ziwuling Mountains,the days of high temperature in the central and southern parts was significantly less than that in the central and northern parts;③if the warm high pressure ridge on the Qinghai-Tibet Plateau developed strongly in summer,the temperature of the closed warm center reached 0-4℃on the 500 hPa of high-altitude weather map.If the warm air mass developed eastward,it often led to sustained high temperature weather in Longdong region;④when the El Nino phenomenon occurred,the subtropical high in the western Pacific developed strongly in summer,with a center located northward,which was stable,with little movement.It was dry,sunny,hot,and rainless in Longdong region,and the high temperature weather was more significant than that in normal years.展开更多
基金supported by the Beijing Natural Science Foundation,China(Grant No.JQ20039)National Natural Science Foundation of China(Grant No.12172019).
文摘The dynamic spalling characteristics of rock are important for stability analysis in rock engineering.This paper presented an experimental investigation on the dynamic spalling characteristics of granite with different temperatures and strain rates.A series of dynamic spalling tests with different impact velocities were conducted on thermally treated granite at different temperatures.The dynamic spalling strengths of granite with different temperatures and strain rates were determined.A model was proposed to correlate the dynamic spalling strength of granite,high temperature and strain rate.The results show that the spalling strength of granite decreases with increasing temperature.Moreover,the spalling strength of granite with a higher strain rate is larger than that with a lower strain rate.The proposed model can describe the relationship among dynamic spalling strength of granite,high temperature and strain rate.
基金Supported by National Key R&D Program of China(Grant No.2022YFB3401901)Key Program of National Natural Science Foundation of China(Grant No.U2067221)+2 种基金Sichuan Provincial Science and Technology Planning Project(Grant Nos.2022JDJQ0019 and 2022ZYD0029)Funds for China Postdoctoral Science Foundation(Grant No.2022M713008)Sichuan Provincial Innovative Talent Funding Project for Postdoctoral Fellows(Grant No.BX202225).
文摘In pressurized water reactor(PWR),fretting wear is one of the main causes of fuel assembly failure.Moreover,the operation condition of cladding is complex and harsh.A unique fretting damage test equipment was developed and tested to simulate the fretting damage evolution process of cladding in the PWR environment.It can simulate the fretting wear experiment of PWR under different temperatures(maximum temperature is 350℃),displacement amplitude,vibration frequency,and normal force.The fretting wear behavior of Zr-4 alloy under different temperature environments was tested.In addition,the evolution of wear scar morphology,profile,and wear volume was studied using an optical microscope(OM),scanning electron microscopy(SEM),and a 3D white light interferometer.Results show that higher water temperature evidently decreased the cladding wear volume,the wear mechanism of Zr-4 cladding changed from abrasive wear to adhesive wear and the formation of an oxide layer on the wear scar reduced the wear volume and maximum wear depth.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51772120,11604246,51872112,and 11804305)the Project of Jilin Science and Technology Development Plan,China(Grant No.20180201079GX)
文摘The properties of urea under high pressure and high temperature(HPHT) are studied using a China-type large volume cubic high-presentation apparatus(CHPA)(SPD-6 × 600).The samples are characterized by scanning electron microscopy(SEM), x-ray diffraction(XRD), and Raman spectroscopy.By directly observing the macroscopic morphology of urea with SEM, it is confirmed that the melting point of urea rises with the increase of pressure.The XRD patterns of urea residues derived under different pressures show that the thermal stability of urea also increases with the increase of pressure.The XRD pattern of the urea residue confirms the presence of C3H5N5O(ammeline) in the residue.A new peak emerges at 21.80°, which is different from any peak of all urea pyrolysis products under normal pressure.A more pronounced peak appears at 708 cm^-1 in the Raman spectrum, which is produced by C-H off-plane bending.It is determined that the urea will produce a new substance with a C-H bond under HPHT, and the assessment of this substance requires further experiments.
基金the National Natural Science Foundation of China(Grant No.42204006)the Guangxi Natural Science Foundation of China(2020GXNSFBA297145)+1 种基金the“Ba Gui Scholars”program of the provincial government of Guangxi,and Innovation Project of GuangXi Graduate Education(Grant No.YCSW2022322)Open Research Fund Program of the Key Laboratory of Geospace Environment and Geodesy,Ministry of Education,China(GrantNo.20-01-03,21-01-04)
文摘Temperature and pressure play key roles in Global Navigation Satellite System(GNSS) precipitable water vapor(PWV) retrieval. The National Aeronautics and Space Administration(NASA) and European Center for Medium-Range Weather Forecasts(ECMWF) have released their latest reanalysis product: the modern-era retrospective analysis for research and applications, version 2(MERRA-2) and the fifthgeneration ECMWF reanalysis(ERA5), respectively. Based on the reanalysis data, we evaluate and analyze the accuracy of the surface temperature and pressure products in China using the the measured temperature and pressure data from 609 ground meteorological stations in 2017 as reference values.Then the accuracy of the two datasets and their performances in estimating GNSS PWV are analyzed. The PWV derived from the pressure and temperature products of ERA5 and MERRA-2 has high accuracy. The annual average biases of pressure and temperature for ERA5 are-0.07 hPa and 0.45 K, with the root mean square error(RMSE) of 0.95 hPa and 2.04 K, respectively. The annual average biases of pressure and temperature for MERRA-2 are-0.01 hPa and 0.38 K, with the RMSE of 1.08 h Pa and 2.66 K, respectively.The accuracy of ERA5 is slightly higher than that of MERRA-2. The two reanalysis data show negative biases in most regions of China, with the highest to lowest accuracy in the following order: the south,north, northwest, and Tibet Plateau. Comparing the GNSS PWV calculated using MERRA-2(GNSS MERRA-2 PWV) and ERA5(GNSS ERA5 PWV) with the radiosonde-derived PWV from 48 co-located GNSS stations and the measured PWV of the co-location radiosonde stations, it is found that the accuracy of GNSS ERA5 PWV is better than that of GNSS MERRA-2 PWV. These results show the different applicability of surface temperature and pressure products from MERRA-2 and ERA5 data, indicating that both have important applications in meteorological research and GNSS water vapor monitoring in China.
基金Project supported by the National Natural Science Foundation of China(Grant No.11604246)Natural Science Foundation of Guizhou Province Education Department of China(Grant Nos.KY2017053 and KY2018343)+1 种基金Natural Science Foundation of Guizhou Procince Science and Technology Agency of China(Grant Nos.20181163 and LH 20177311)Outstanding Young Science and Technology Talents of Guizhou Pronice of China(Grant No.20195673).
文摘Diamond crystallization was carried out with CH4N2S additive in the FeNiCo-C system at pressure 6.0 GPa and temperature ranging from 1290 ℃ to 1300 ℃. The crystallization qualities of the synthetic crystals were characterized by Raman spectra and the Raman peaks located at 1331 cm-1. Fourier transform infrared (FTIR) results showed that the hydrogen-related absorption peak of the as-grown diamond was at 2920 cm-1, respectively. Interestingly, A-center nitrogen was observed in the obtained diamond and the characteristic absorption peaks located at 1095 cm-1 and 1282 cm-1. Especially, the absorption peak at 1426 cm-1 attributing to the aggregation B-center nitrogen defect was distinctly found when the CH4N2S content reached 0.3 mg in the synthesis system, which was extremely rare in synthetic diamond. Furthermore, optical color centers in the synthesized crystals were investigated by photoluminescence (PL).
基金Supported by the National Natural Science Foundation of China(41872124,42130803)Sinopec Key Science and Technology Project(P20046).
文摘To investigate the porosity, permeability and rock mechanics of deep shale under temperature-pressure coupling, we selected the core samples of deep shale from the Lower Silurian Longmaxi Formation in the Weirong and Yongchuan areas of the Sichuan Basin for porosity and permeability experiments and a triaxial compression and sound wave integration experiment at the maximum temperature and pressure of 120 ℃ and 70 MPa. The results show that the microscopic porosity and permeability change and the macroscopic rock deformation are mutually constrained, both showing the trend of steep and then gentle variation. At the maximum temperature and pressure, the porosity reduces by 34%–71%, and the permeability decreases by 85%–97%. With the rising temperature and pressure, deep shale undergoes plastic deformation in which organic pores and clay mineral pores are compressed and microfractures are closed, and elastic deformation in which brittle mineral pores and rock skeleton particles are compacted. Compared with previous experiments under high confining pressure and normal temperature,the experiment under high temperature and high pressure coupling reveals the effect of high temperature on stress sensitivity of porosity and permeability. High temperature can increase the plasticity of the rock, intensify the compression of pores due to high confining pressure, and induce thermal stress between the rock skeleton particles, allowing the reopening of shale bedding or the creation of new fractures along weak planes such as bedding, which inhibits the decrease of permeability with the increase of temperature and confining pressure. Compared with the triaxial mechanical experiment at normal temperature, the triaxial compression experiment at high temperature and high pressure demonstrates that the compressive strength and peak strain of deep shale increase significantly due to the coupling of temperature and pressure. The compressive strength is up to 435 MPa and the peak strain exceeds 2%, indicating that high temperature is not conducive to fracture initiation and expansion by increasing rock plasticity. Lithofacies and mineral composition have great impacts on the porosity, permeability and rock mechanics of deep shale. Shales with different lithologies are different in the difficulty and extent of brittle failure. The stress-strain characteristics of rocks under actual geological conditions are key support to the optimization of reservoir stimulation program.
基金Financial support comes from China National Natural Science Foundation(Grant No.51974352)as well as from China University of Petroleum(East China)(Grant Nos.2018000025 and 2019000011)。
文摘In order to investigate the problem of long-term strength retrogression in oil well cement systems exposed to high pressure and high temperature(HPHT)curing conditions,various influencing factors,including cement sources,particle sizes of silica flour,and additions of silica fume,alumina,colloidal iron oxide and nano-graphene,were investigated.To simulate the environment of cementing geothermal wells and deep wells,cement slurries were directly cured at 50 MPa and 200?C.Mineral compositions(as determined by X-ray diffraction Rietveld refinement),water permeability,compressive strength and Young’s modulus were used to evaluate the qualities of the set cement.Short-term curing(2e30 d)test results indicated that the adoption of 6 m m ultrafine crystalline silica played the most important role in stabilizing the mechanical properties of oil well cement systems,while the addition of silica fume had a detrimental effect on strength stability.Long-term curing(2e180 d)test results indicated that nano-graphene could stabilize the Young’s modulus of oil well cement systems.However,none of the ad-mixtures studied here can completely prevent the strength retrogression phenomenon due to their inability to stop the conversion of amorphous to crystalline phases.
基金supported by the National Natural Science Foundation of China (No. 50971020)
文摘In this paper,diamond/CuCr and diamond/CuB composites were prepared using the pressure infiltration method.The physical property measurement system(PPMS)was adopted to evaluate the thermal conductivity of diamond/Cu and MoCu composites within the range of100–350 K,and a scanning electron microscope(SEM)was utilized to analyze the microstructure and fracture appearance of the materials.The research indicates that the thermal conductivity of diamond/Cu composite within the range of100–350 K is 2.5–3.0 times that of the existing MoCu material,and the low-temperature thermal conductivity of diamond/Cu composite presents an exponential relationship with the temperature.If B element was added to a Cu matrix and a low-temperature binder was used for prefabricated elements,favorable interfacial adhesion,relatively high interfacial thermal conductivity,and favorable low-temperature heat conduction characteristics would be apparent.
基金supported by the National Natural Science Foundation of China(Grant No.52102436)the Fundamental Research Funds for the Central Universities(Grant No.30920021109)+3 种基金Natural Science Foundation of Jiangsu Province(BK20200496)China Postdoctoral Science Foundation(Grant No.2020M681615)the project of Key Laboratory of Impact and Safety Engineering(Ningbo University),Ministry of Education(Grant No.CJ202107)the State Key Laboratory of Mechanics and Control of Mechanical Structures(Nanjing University of Aeronautics and astronautics)(Grant No.MCMS-E-0221Y01)。
文摘Fluctuations in outer space's temperature would affect the spacecraft's regular operation.This paper aims to study the temperature influences of the aluminum honeycomb buffer in the tether-net launcher.Firstly,a buffer structure was designed to attenuate the pyroshock generated by the pyrotechnic device.Secondly,the mechanical properties of aluminum honeycomb at different temperatures were obtained through quasi-static compression experiments.Then,the internal ballistic responses of the launcher were gained by the closed bomb tests and the equivalent classical interior ballistic model.Finally,the recoil performance of the launcher with aluminum honeycomb buffer at different temperatures was studied.It is revealed that the aluminum honeycomb crushing force gradually decreases with the temperature increases.The peak pressure,burning rate coefficient and velocity increase while the peak time decreases with the temperature increase for the interior ballistics.For the launcher recoil responses,the average launch recoil decreases if the aluminum honeycomb doesn't enter the dense stage.The impact acceleration,projectile velocity and displacement increase as the temperature increase.The paper spotlights the temperature's influence on the recoil characteristics of the aluminum honeycomb buffer,which provides a new idea for buffering technology of pyrotechnic devices in a complex space environment.
文摘The enclosed organic matter chiefly releases lower carbon\|number n\|alkanes under high temperature and high pressure, while the kerogen mainly produces higher carbon\|number n\|alkanes. The residual hydrocarbons generated by both kerogen and enclosed organic matter in the Tieling limestone contain abundant tricyclic terpanes, pentacyclic triterpanes and steranes, but the contents of tetracyclic terpanes and 25\|norhopane are lower. The residual enclosed organic matter shows the same distribution characteristics of n\|alkanes, steranes and terpanes as that of the original bitumen A, i.e., the higher contents of triterpanes and tetracyclic terpanes, the higher ratios of 25\|norhopanes over regular hopanes and markedly degraded steranes. By comparing the residual hydrocarbon, residual enclosed organic matter and original enclosed organic matter, it can be concluded that steranes and terpanes in the residual hydrocarbons are produced mainly by the kerogen and subordinately by the residual enclosed organic matter, the steranes and terpanes do not enter into the residual enclosed organic matter, and the thermal evolution of the residual enclosed organic matter maintains its unique character. Furthermore, pressure retards the pyrolysis of higher carbon\|number alkanes and influences the isomerization ratios of C\-\{29\}\|steranes, making 20S/(20S+20R) lower under the higher pressure than that under lower pressure. Higher pressure retards the thermal evolution of organic matter.
基金Funded by the Fundamental Research Funds for the Central Universities(No.2572021AW10)。
文摘In order to investigate the behavior characteristics of asphalt components during the process of nano-cracks temperature self-healing(NTS),molecular simulation technology was used to simulate the temperature self-healing of asphalt.Based on the determination of asphalts(virgin asphalt and aged asphalt),the proportional changes of asphalt components were confirmed.The distribution characteristics of asphalt components were obtained by marking different components in the process of NTS.At the same time,the rationality of the micro simulation findings was confirmed by asphalt performance tests and infrared spectroscopy results.The results show that different asphalt components have different behavior characteristics in the process of NTS.The content of asphaltene and resin plays a key role in the process of NTS,while saturation and aromatics play an active role in the temperature self-healing before and after aging.The NTS is the result of the comprehensive action of different components,and the self-healing efficiency is proportional to the relative molecular mass.The effect of aging on the NTS is also realized by changing the proportion of asphalt components.
基金funded by the CNOOC Scientific Research Project“Study of cementing key properties and its matching technology of LD-10 gas field”(Grant No.CCL2019ZJFN1227).
文摘Air channeling in the annulus between the casing and the cement sheath and/or between the cement sheath and formation is the main factor affecting the safe operation of natural gas wells at high temperatures and pressures.Prevention of this problem requires,in general,excellent anti-channeling performances of the cement sheath.Three methods to predict such anti-channeling performances are proposed here,which use the weightless pressure of cement slurry,the permeability of cement stone and the volume expansion rate of cement sheath as input parameters.Guided by this approach,the anti-channeling performances of the cement slurry are evaluated by means of indoor experiments,and the cement slurry is optimized accordingly.The results show that the dangerous transition time of the cement slurry with optimized dosage of admixture is only 76 min,the permeability of cement stone is 0.005 md,the volume shrinkage at final setting is only 0.72%,and the anti-channeling performances are therefore maximized.The effective utilization of the optimized cement slurry in some representative wells(LD10–1-A1 and LD10–1-A2 in LD10–1 gas field)is also discussed.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11565003)the Jiangxi Province Academic Degree and Postgraduate Education and Teaching Reform Research Project (Grant No. JXYJG-2022-180)the Scientific Research Base Project of Gannan Normal University (Grant No. 22wdxt01)。
文摘Atmospheric pressure plasma jet shows great potential for polymer film processing. The electrode geometry is the key factor to determine discharge characteristics and film modification of jets. In this paper, we compared the discharge characteristics and the film modifications of atmospheric pressure plasma jets with needle-ring electrode(NRE) and doublering electrode(DRE). The results show that jet with NRE has stronger electric field intensity and higher discharge power,making it present more reactive oxygen particles and higher electron temperature, but its discharge stability is insufficient.In contrast, the jet with DRE has uniform electric field distribution of lower field intensity, which allows it to maintain stable discharge over a wide range of applied voltages. Besides, the modification results show that the treatment efficiency of PET film by NRE is higher than that by DRE. These results provide a suitable atmospheric pressure plasma jets device selection scheme for polymer film processing process.
基金the National Natural Science Foundation of China(Grant No.12074273)。
文摘Silicon carbide(SiC)is a high-performance structural ceramic material with excellent comprehensive properties,and is unmatched by metals and other structural materials.In this paper,raw SiC powder with an average grain size of 5μm was sintered by an isothermal-compression process at 5.0 GPa and 1500?C;the maximum hardness of the sintered samples was31.3 GPa.Subsequently,scanning electron microscopy was used to observe the microscopic morphology of the recovered SiC samples treated in a temperature and extended pressure range of 0-1500?C and 0-16.0 GPa,respectively.Defects and plastic deformation in the SiC grains were further analyzed by transmission electron microscopy.Further,high-pressure in situ synchrotron radiation x-ray diffraction was used to study the intergranular stress distribution and yield strength under non-hydrostatic compression.This study provides a new viewpoint for the sintering of pure phase micron-sized SiC particles.
文摘A theoretical study based on the Penalty factor(PF)method by Cavallini et al.is conducted to show that the pressure drop occurring in a wire-on-tube heat exchanger can be converted into a temperature difference for two types of refrigerants R-134a and R-600a typically used for charging refrigerators and freezers.The following conditions are considered:stratified or stratified-wavyflow condensation occurring inside the smooth tube of a wire-on-tube condenser with diameter 3.25,4.83,and 6.299 mm,condensation temperatures 35℃,45℃,and 54.4℃ and cover refrigerant massflow rate spanning the interval from 1 to 7 kg/hr.The results show that the PF variation is not linear with vapor quality and attains a maximum when the vapor quality is 0.2 and 0.18 for the R-134a and R-600a refrigerants,respectively.The PF increases with the refrigerant massflow rate if the inner diameter and saturation temperature constant,and it decreases on increasing the inner diameter to 6.299 mm for constant refrigerant massflow rate and saturation temperature.The PF for R-600a is higher than that for R-134a due to the lower saturation pressure in thefirst case.Furthermore,a stratifiedflow produces higher PF in comparison to the annularflow due to the effect of the surface tension.
文摘The mechanical behavior of the test string in deep wells is generally relatively complex as a result of the high temperature and high pressure,severe dogleg and buckling effects,which in some circumstances can even lead to string failure.Traditional computational methods for the analysis of these behaviors are often inaccurate.For this reason,here a more accurate mechanical model of the test string is introduced by considering variables such as temperature,pressure,wellbore trajectory,and buckling,as well as combining them with the deformation and string constraint conditions brought in by changes in temperature and pressure during the tripping,setting,and test operations.The model is validated by applying it to a specific high-pressure gas well(located in Northeast Sichuan).
基金the financial support provided by China’s Second Tibetan Plateau Scientific Expedition and Research (No. 2019QZKK0905)the National Natural Science Foundation of China (No. 41371090)the State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining and Technology (No. SKLGDUEK1904)
文摘Buildings are always affected by frost heave and thaw settlement in cold regions,even where saline soil is present.This paper describes the triaxial testing results of frozen silty clay with high salt content and examines the in-fluence of confining pressure and temperature on its mechanical characteristics.Conventional triaxial compression tests were conducted under different confining pressures(0.5–7.0 MPa)and temperatures(-6℃,-8℃,-10℃,and-12℃).The test results show that when the confining pressure is less than 1 MPa,the frozen saline silty clay is dominated by brittle behavior with the X-shaped dilatancy failure mode.As the confining pressure increases,the sample gradually transitions from brittle to plastic behavior.The strength of frozen saline silty clay rises first and then decreases with increasing confining pressure.The improved Duncan-Chang hyperbolic model can describe the stress-strain relationship of frozen saline silty clay.And the parabolic strength criterion can be used to describe the strength evolution of frozen saline silty clay.The function relation of strength parameters with temperature is obtained by fitting,and the results of the parabolic strength criterion are in good agreement with the experimental results,especially when confining pressure is less than 5 MPa.Therefore,the study has important guiding significance for design and construction when considering high salinity soil as an engineering material in cold regions.
基金Supported by Special Basic Cooperative Research Programs of Yunnan Provincial Undergraduate Universities Association (2021BA070001-070)Yunnan Fundamental Research Projects (202201AT070226).
文摘[Objectives]To investigate the effects of different temperature and starvation stress on the expression of AaHsp90 and reveal the molecular mechanism of adaptation to environment in Antheraea assama.[Methods]Taking the normal feeding group at 26℃as the control,the expression change of AaHsp90 was detected by real-time PCR in midgut,fat body and hemlymph after high temperature stress at 38℃,low temperature stress at 4℃and starvation stress separately for different time on the third day of the fifth larvae.[Results]The expression of AaHsp90 in midgut,fat body and hemlymph of Antheraea assama were increased obviously at first and then decreased sharply with the prolongation of treatment time at 38℃.There has a certain inhibitory effect on the expression of AaHsp90 in midgut,fat body and hemolymph after treatment with 4℃for different time.After treatment with starvation,the AaHsp90 expression were increased at 12 and 18 h and decreased sharply at 24 h in midgut,fat body and hemolymph of A.assama.[Conclusions]Comprehensive analysis showed that high temperature and starvation stress can induce the expression of AaHsp90,while low temperature stress mainly suppressed its expression.It was suggested that the AaHsp90 protein may play an important role in the process of adaptation to high temperature and starvation stress in A.assama.
文摘Using meteorological data from 8 national basic meteorological observation stations in Qingyang City of Longdong region from 1972 to 2021,the causes and change characteristics of high-temperature weather were analyzed,and targeted countermeasures and suggestions were proposed for residents' production,life,and energy security supply affected by high-temperature weather.The results showed that①affected by global warming,the annual average temperature,annual average maximum temperature,annual extreme maximum temperature,days of daily maximum temperature≥30℃,and days of daily maximum temperature≥35℃in Longdong region were all showing an upward trend;②due to the different terrain and soil properties of the underlying surface,the increase in high temperature weather varied in different regions.Due to the influence of desert and hilly terrain,the frequency and days of high temperature occurrence were relatively high in the central and northern parts of Qingyang City.Due to the climate regulation of the Ziwuling Mountains,the days of high temperature in the central and southern parts was significantly less than that in the central and northern parts;③if the warm high pressure ridge on the Qinghai-Tibet Plateau developed strongly in summer,the temperature of the closed warm center reached 0-4℃on the 500 hPa of high-altitude weather map.If the warm air mass developed eastward,it often led to sustained high temperature weather in Longdong region;④when the El Nino phenomenon occurred,the subtropical high in the western Pacific developed strongly in summer,with a center located northward,which was stable,with little movement.It was dry,sunny,hot,and rainless in Longdong region,and the high temperature weather was more significant than that in normal years.