The particle residence time distribution(RTD)and axial dispersion coefficient are key parameters for the design and operation of a pressurized circulating fluidized bed(PCFB).In this study,the effects of pressure(0.1-...The particle residence time distribution(RTD)and axial dispersion coefficient are key parameters for the design and operation of a pressurized circulating fluidized bed(PCFB).In this study,the effects of pressure(0.1-0.6 MPa),fluidizing gas velocity(2-7 m·s^(-1)),and solid circulation rate(10-90 kg·m^(-2)·s^(-1))on particle RTD and axial dispersion coefficient in a PCFB are numerically investigated based on the multiphase particle-in-cell(MP-PIC)method.The details of the gas-solid flow behaviors of PCFB are revealed.Based on the gas-solid flow pattern,the particles tend to move more orderly under elevated pressures.With an increase in either fluidizing gas velocity or solid circulation rate,the mean residence time of particles decreases while the axial dispersion coefficient increases.With an increase in pressure,the core-annulus flow is strengthened,which leads to a wider shape of the particle RTD curve and a larger mean particle residence time.The back-mixing of particles increases with increasing pressure,resulting in an increase in the axial dispersion coefficient.展开更多
Graphene hosts intriguing photocarrier dynamics such as negative transient terahertz(THz) photoconductivity, high electron temperature, benefiting from the unique linear Dirac dispersion. In this work, the pressure ef...Graphene hosts intriguing photocarrier dynamics such as negative transient terahertz(THz) photoconductivity, high electron temperature, benefiting from the unique linear Dirac dispersion. In this work, the pressure effects of photocarrier dynamics of graphene have been investigated using in situ time-resolved THz spectroscopy in combination with diamond anvil cell exceeding 9 GPa. We find that the negative THz conductivity maintains in our studied pressure range both for monolayer and bilayer graphene. In particular, the amplitude of THz photoconductivity in monolayer graphene manifests an extraordinary dropping with pressure, compared with that from the counterparts such as bulk silicon and bilayer graphene.Concomitantly, the time constant is reduced with increasing pressure, highlighting the pressure-induced hot carrier cooling.The pressure dependence of photocarrier dynamics in monolayer graphene is likely related with the enhancement of the interfacial coupling between diamond surface and sample, allowing for the activity of new electron–phonon scattering. Our work is expected to provide an impetus for the studies of high-pressure THz spectroscopy of two-dimensional materials.展开更多
In pressurized water reactor(PWR),fretting wear is one of the main causes of fuel assembly failure.Moreover,the operation condition of cladding is complex and harsh.A unique fretting damage test equipment was develope...In pressurized water reactor(PWR),fretting wear is one of the main causes of fuel assembly failure.Moreover,the operation condition of cladding is complex and harsh.A unique fretting damage test equipment was developed and tested to simulate the fretting damage evolution process of cladding in the PWR environment.It can simulate the fretting wear experiment of PWR under different temperatures(maximum temperature is 350℃),displacement amplitude,vibration frequency,and normal force.The fretting wear behavior of Zr-4 alloy under different temperature environments was tested.In addition,the evolution of wear scar morphology,profile,and wear volume was studied using an optical microscope(OM),scanning electron microscopy(SEM),and a 3D white light interferometer.Results show that higher water temperature evidently decreased the cladding wear volume,the wear mechanism of Zr-4 cladding changed from abrasive wear to adhesive wear and the formation of an oxide layer on the wear scar reduced the wear volume and maximum wear depth.展开更多
In this research,mechanical stress,static strain and deformation analyses of a cylindrical pressure vessel subjected to mechanical loads are presented.The kinematic relations are developed based on higherorder sinusoi...In this research,mechanical stress,static strain and deformation analyses of a cylindrical pressure vessel subjected to mechanical loads are presented.The kinematic relations are developed based on higherorder sinusoidal shear deformation theory.Thickness stretching formulation is accounted for more accurate analysis.The total transverse deflection is divided into bending,shear and thickness stretching parts in which the third term is responsible for change of deflection along the thickness direction.The axisymmetric formulations are derived through principle of virtual work.A parametric study is presented to investigate variation of stress and strain components along the thickness and longitudinal directions.To explore effect of thickness stretching model on the static results,a comparison between the present results with the available results of literature is presented.As an important output,effect of micro-scale parameter is studied on the static stress and strain distribution.展开更多
In resonance with the Fukushima Daiichi Nuclear Power Plant accident lesson, a novel fuel design to enhance safety regarding severe accident scenarios has become increasingly appreciated in the nuclear power industry....In resonance with the Fukushima Daiichi Nuclear Power Plant accident lesson, a novel fuel design to enhance safety regarding severe accident scenarios has become increasingly appreciated in the nuclear power industry. This research focuses on analysis of the neutronic properties of a silicon carbide(SiC) cladding fuel assembly, which provides a greater safety margin as a type of accident-tolerant fuel for pressurized water reactors. The general physical performance of SiC cladding is explored to ascertain its neutronic performance. The neutron spectrum, accumulation of ^(239)Pu, physical characteristics,temperature reactivity coefficient, and power distribution are analyzed. Furthermore, the influences of a burnable poison rod and enrichment are explored. SiC cladding assemblies show a softer neutron spectrum and flatter power distribution than conventional Zr alloy cladding fuel assemblies. Lower enrichment fuel is required when SiC cladding is adopted. However, the positive reactivity coefficient associated with the SiC material remains to be offset. The results reveal that SiC cladding assemblies show broad agreement with the neutronic performance of conventional Zr alloy cladding fuel. In the meantime, its unique physical characteristics can lead to improved safety and economy.展开更多
We report the first application of pressurized intraperitoneal aerosol chemotherapy(PIPAC) as a rescue therapy before palliative D2 gastrectomy combined with liver metastasectomy performed in a 49-yearold woman with p...We report the first application of pressurized intraperitoneal aerosol chemotherapy(PIPAC) as a rescue therapy before palliative D2 gastrectomy combined with liver metastasectomy performed in a 49-yearold woman with peritoneal carcinomatosis who was primarily diagnosed with and underwent surgery for a Krukenberg tumor. The PIPAC procedure was performed with the use of cisplatin at 7.5 mg/m2 and doxorubicin at 1.5 mg/m2 for 30 min at 37 ℃. Eight weeks after the PIPAC procedure, the patient underwent open classic D2 gastrectomy with the creation of a Roux-en-Y anastomosis(RNY) combined with liver metastasectomy. The patient underwent the classic protocol for chemotherapy combined with Xeloda. The patient felt better and returned to her daily activities. Multicenter data should be gathered to confirm the usefulness of PIPAC as a rescue or neoadjuvant supportive therapy in a very select group of patients who have been recently qualified to undergo classic chemotherapy or standard oncologic surgical procedures.展开更多
A novel gradient pressurized capillary electrochromatography (pCEC) instrument was developed to separate peptides. Two gradient elution modes, hydrophobic and hydrophilic interaction mode in pCEC, were performed on t...A novel gradient pressurized capillary electrochromatography (pCEC) instrument was developed to separate peptides. Two gradient elution modes, hydrophobic and hydrophilic interaction mode in pCEC, were performed on this instrument. Baseline separation of six peptides was obtained on two gradient modes with C18 column and strong cationic exchange column respectively. The effects of mixer volume and total flow rate of pumps on resolution were also discussed.展开更多
Externally pressurized spherical air bearings are the key component of the three-axis air bearing table, and the manufacturing errors of the bearing affects the performance of the air bearing table. However, the manuf...Externally pressurized spherical air bearings are the key component of the three-axis air bearing table, and the manufacturing errors of the bearing affects the performance of the air bearing table. However, the manufacturing errors are unavoidable, and the pursuit to enhance the manufacturing accuracy will increase the cost greatly. In order to provide some theoretical guideline for the tolerance choice in the design of the externally pressurized spherical air bearings with inherent compensation, the effects of several manufacturing errors on the static characteristics of the air bearing are studied. Due to the complex geometry of the computational domain, an unstructured meshing technology is used for mesh generation. A finite-volume method is adopted to discretize the three-dimensional steady-state compressible Navier-Stokes equations. A modified SIMPLE algorithm which is suitable for compressible flows is applied to solve the discretized governing equations. The effects of the dimension error and the roundness error of the ball head and the ball socket on the static characteristics are investigated. The investigation result shows that the positive dimension error and the oblate spheroid-type roundness error of the ball head as well as the negative dimension error and the prolate spheroid-type roundness error of the ball socket can improve the bearing capacity and static stiffness of the air bearings by reducing the mass flow. The calculation method proposed in this paper fits well for the general principle, which can be extended to the characteristics analysis of other air bearings.展开更多
Nitrogen oxides are one of the most significant pollution sources during coal combustion. This experimental study was conducted in a 15 kWth lab-scale pressurized fluidized bed (inner diameter = 81-100 mm, H = 2100 mm...Nitrogen oxides are one of the most significant pollution sources during coal combustion. This experimental study was conducted in a 15 kWth lab-scale pressurized fluidized bed (inner diameter = 81-100 mm, H = 2100 mm) firing with bituminous coals. The effects of operating parameters, including bed temperature (800℃-900℃), operating pressure (0.1-0.4 MPa), excess air level (16%-30%) and flow pattern on NOX and N2O emissions were systematically studied during the tests. During each test the interaction effects of all the operating parameters were properly controlled. The results show that most operating parameters have an opposite effect on NOX and N2O emissions, and the N2O emissions mainly depend on the bed temperature. Increasing the operating pressure can significantly suppress the fuel-N conversion to NOX but enhance its conversion to N2O. With the rise of the excess air level and fluidization number, NOX emissions grow distinctly while N2O emissions remain almost unchanged. Total nitrogen oxide emissions increase with the bed temperature while decrease with the operating pressure.展开更多
This study investigated the use of leftover biomass(rice husks)as the raw material for the biotechnological production of platform chemicals and biopolymers.Following the biorefinery concept,different acid hydrolysate...This study investigated the use of leftover biomass(rice husks)as the raw material for the biotechnological production of platform chemicals and biopolymers.Following the biorefinery concept,different acid hydrolysates were studied and resulted into a wide range of treatment strategies.Chemometrics were applied throughout the procedures in multivariate experimental conditions.By using the best hydrolytic conditions of 6.0%H3PO4,135oC(45 MPa)and reaction time of 62 min,21.0 g/L sugar hydrolysates were produced;by using the best hydrolytic condition of 4.5%HNO3,135oC/35 min,16.1 g/L sugar hydrolysates were produced;and with the hydrolysates use of 1.5%H2SO4 and 1.5%HCl,135oC/62 min,18.2 and 17.8 g/L sugar hydrolysates were produced,respectively.The highest productivity,in terms of fermentable sugars,reached 68%of integral cellulose/hemicellulose fraction and surpassed those found in the literature,with regard to the processing of rice husks,by considering just one step process.Sulfuric hydrolysate,detoxified with active carbon,was used to prove this proposal viability,resulting in a fermentation substrate for A.terreus(ATCC10020)and R.radiobacter(LMG196)strains(natural producers of bioproducts),which certified the feasibility of the proposal.The production of fermentable sugars from leftover biomass should encourage a search for new bioconversion routes,which can result in economic and environmental benefits and a spread of knowledge.展开更多
Good practices of maintenance optimization in nuclear power field need to be effectively consolidated and inherited,and maintenance optimization can provide technology support to create a long-term reliable and econom...Good practices of maintenance optimization in nuclear power field need to be effectively consolidated and inherited,and maintenance optimization can provide technology support to create a long-term reliable and economic operation for nuclear power plants( NPPs) especially for a large number of nuclear powers under construction. Based on the development and application of maintenance template in developed countries,and combining with reliability-centered maintenance( RCM) analysis results and maintenance experience data over the past ten years in domestic NPPs, the development process of maintenance template was presented for Chinese pressurized water reactor( PWR) NPP,and the application of maintenance template to maintenance program development and maintenance optimization combined with cases were demonstrated. A shortcut was provided for improving the efficiency of maintenance optimization in domestic PWR NPP,and help to realize a safe,reliable,and economic operation for domestic NPPs.展开更多
A study of reaction mechanisms and chemical kinetics of pressurized pyrolysis of Chinese Liushuhe oil shale in the presence of water were conducted using an autoclave for simulating and modeling in-situ underground th...A study of reaction mechanisms and chemical kinetics of pressurized pyrolysis of Chinese Liushuhe oil shale in the presence of water were conducted using an autoclave for simulating and modeling in-situ underground thermal degradation.It was found that the oil shale was first pyrolyzed to form pyrobitumen,shale oil,shale gas and residue,then the pyrobitumen was further pyrolyzed to form more shale oil,shale gas,and residue.It means that there are two consecutive and parallel reactions.With increasing temperature,the pyrobitumen yield,as intermediate,first reached a maximum,then decreased to approximately zero.The kinetics results show that both these reactions are first order.The activation energy of pyrobitumen formation from oil shale is lower than that of shale oil formation from pyrobitumen.展开更多
A new MEEKC method assisted with pressure-driven mobile phase was presented for the separation of felted explosives. Microemulsion solution was composed of 80 mmol/L heptane -120 mmol/L SDS (sodium dodecyl sulphate) -...A new MEEKC method assisted with pressure-driven mobile phase was presented for the separation of felted explosives. Microemulsion solution was composed of 80 mmol/L heptane -120 mmol/L SDS (sodium dodecyl sulphate) - 900 mmol/L butanol - 10 mmol/L borate at pH 9.4 and a pressure-driven flow of 0.020 mL/min under 1.3 MPa was employed to manipulate the separation. Explosives HMX (1, 3, 5, 7-tetranitro-l, 3, 5, 7-tetrazacyclooctane) and TATB (triamino-trinitrobenzene), which were felted on fluorine rubber F2311 (polytrifluorochlorethylene and polyvinylidene fluoride 1/1 co-polymerization) and F2314 (polytrifluorochlorethylene and polyvinylidene fluoride 4/1 co-polymerization) were well separated with very good peak shapes.展开更多
In this paper, response surface methodology(RSM) based on central composite design(CCD) is applied to obtain an optimization design for the fuel rod's diameter and distance cooled by turbulent Al_2O_3–water nanof...In this paper, response surface methodology(RSM) based on central composite design(CCD) is applied to obtain an optimization design for the fuel rod's diameter and distance cooled by turbulent Al_2O_3–water nanofluid for a typical pressurized water reactor(PWR). Fuel rods and nanofluid flow between them are simulated 3D using computational fluid dynamics(CFD) by ANSYS-FLUNET package software. The RNG k–ε model is used to simulate turbulent nanofluid flow between the rods. The effect of different nanoparticles concentration is also investigated on the Nusselt number from heat transfer efficiency view point. Results reveal that when distance parameter(a) is in the minimum level and diameter parameter(r) is in the maximum possible level, cooling the rods will be better due to higher Nusselt number in this situation. Also, using the different nanoparticles on the cooling process confirms that Al_2O_3 averagely 17% and TiO_2 10% improve the Nusselt numbers.展开更多
Capillary electrochromatography (CEC) is a hybrid technique that couples the good selectivity of high-performance liquid chromatography (HPLC) and the high separation efficiency of capillary electrophoresis (CE)...Capillary electrochromatography (CEC) is a hybrid technique that couples the good selectivity of high-performance liquid chromatography (HPLC) and the high separation efficiency of capillary electrophoresis (CE). Both charged and uncharged compounds can be separated effectively using CEC. In some cases, however, the bubbles that generated in the capillary column in pure CEC performed on commercial CE instruments will cause unstable current and even disrupt the separation when the concentration of buffer is very high. By applying pressure on the electrochromatographic separation via a micro-HPLC pump, pressurized capillary electrochromatography ( pCEC ) combines two driving factors of the electroosmotic flow (EOF) and the pressure flow, thereby increasing the speed and the selectivity of separation and suppressing the bubble formation. Moreover,展开更多
A computational study was carried out on bubble dynamic behaviors and bubble size distributions in a pressurized lab-scale gas-solid fluidized bed of Geldart A particles.High-resolution 3-D numerical simulations were ...A computational study was carried out on bubble dynamic behaviors and bubble size distributions in a pressurized lab-scale gas-solid fluidized bed of Geldart A particles.High-resolution 3-D numerical simulations were performed using the two-fluid model based on the kinetic theory of granular flow.A finegrid,which is in the range of 3–4 particle diameters,was utilized in order to capture bubble structures explicitly without breaking down the continuum assumption for the solid phase.A novel bubble tracking scheme was developed in combination with a 3-D detection and tracking algorithm(MS3 DATA)and applied to detect the bubble statistics,such as bubble size,location in each time frame and relative position between two adjacent time frames,from numerical simulations.The spatial coordinates and corresponding void fraction data were sampled at 100 Hz for data analyzing.The bubble coalescence/break-up frequencies and the daughter bubble size distribution were evaluated by using the new bubble tracking algorithm.The results showed that the bubble size distributed non-uniformly over cross-sections in the bed.The equilibrium bubble diameter due to bubble break-up and coalescence dynamics can be obtained,and the bubble rise velocity follows Davidson’s correlation closely.Good agreements were obtained between the computed results and that predicted by using the bubble break-up model proposed in our previous work.The computational bubble tracking method showed the potential of analyzing bubble motions and the coalescence and break-up characteristics based on time series data sets of void fraction maps obtained numerically and experimentally.展开更多
Tracking load changes in a pressurized water reactor(PWR)with the help of an efficient core power control scheme in a nuclear power station is very important.The reason is that it is challenging to maintain a stable c...Tracking load changes in a pressurized water reactor(PWR)with the help of an efficient core power control scheme in a nuclear power station is very important.The reason is that it is challenging to maintain a stable core power according to the reference value within an acceptable tolerance for the safety of PWR.To overcome the uncertainties,a non-integer-based fractional order control method is demonstrated to control the core power of PWR.The available dynamic model of the reactor core is used in this analysis.Core power is controlled using a modified state feedback approach with a non-integer integral scheme through two different approximations,CRONE(Commande Robuste d’Ordre Non Entier,meaning Non-integer orderRobust Control)and FOMCON(non-integer order modeling and control).Simulation results are produced using MATLAB■program.Both non-integer results are compared with an integer order PI(Proportional Integral)algorithm to justify the effectiveness of the proposed scheme.Sate-spacemodel Core power control Non-integer control Pressurized water reactor PI controller CRONE FOMCON.展开更多
The design of an integral pressurized water reactor (IPWR) focuses on enhancing the safety and reliability of the reactor by incorporating a number of inherent safety features and engineered safety features. However, ...The design of an integral pressurized water reactor (IPWR) focuses on enhancing the safety and reliability of the reactor by incorporating a number of inherent safety features and engineered safety features. However, the characteristics of passive safety systems for the marine reactors are quiet different from those for the land nuclear power plant because of the more formidable and dangerous operation environments of them. This paper presents results of marine black out accident analyses. In the case of a transient, the passive residual heat removal system (PRHRS) is designed to cool the reactor coolant system (RCS) from a normal operation condition to a hot shutdown condition by a natural circulation, and the shutdown cooling system (SCS) is designed to cool the primary system from a hot shutdown condition to a refueling condition by a forced circulation. A realistic calculation has been carried out by using the RELAP5/MOD3.4 code and a sensitivity analysis has been performed to evaluate a passive cooldown capability. The results of the accident analyses show that the reactor coolant system and the passive residual heat removal system adequately remove the core decay heat by a natural circulation.展开更多
The objective of this study is to specify the effect of pressurized soy protein isolate (pSPI), upon the physical development, growth hormones and antioxidants functions of SD rats. The methodology depends on the sele...The objective of this study is to specify the effect of pressurized soy protein isolate (pSPI), upon the physical development, growth hormones and antioxidants functions of SD rats. The methodology depends on the selection of one hundred male SD rats, divided randomly into 5 groups. Each group consists of 20 rats. The groups will be defined as one blank control group, three groups with pSPI at low, medium and high doses and another control group with native soy protein isolates (nSPI). Low, medium and high doses are represented by 0.333 g/kg, 1.667 g/kg and 3.333 g/kg pSPI per weight, respectively. The native soy protein isolate is represented by 3.333 g/kg nSPI per weight. In every group, four animals will be taken out to collect the blood samples and analyze insulin like growth factor-I, growth hormone, thyroid stimulating hormone, thyroxine and triiodothyronin. The other SD rats will be subjected to feeding for 63 consecutive days. The body weight, the body length and food intake of each rat are measured. The total antioxidant capacity, superoxide dismutase (SOD), malondialdehyde and Glutathione Peroxidase in liver and serum of each rat will be analyzed. The results indicated that the groups with medium and high dose of pSPI result in an obvious increase in the body weight, body length and food utilization rate of SD rats. Also, pSPI has a great effect on the growth and antioxidants functions of SD rat.展开更多
Effects of argon, krypton and their mixed pressure treatments on the quality of white mushrooms were studied during 9 days of storage at 4℃. Among all treatments in this study, the minimum respiration rate, polypheno...Effects of argon, krypton and their mixed pressure treatments on the quality of white mushrooms were studied during 9 days of storage at 4℃. Among all treatments in this study, the minimum respiration rate, polyphenoloxidase activity, retained color change, antioxidants and delayed pseudomonas growth were observed with pressure argon (5 MPa) followed by mixing argon and krypton (2.5 MPa each) treatments. Respiration rates after 9 days of storage were 5.35%, 6.20%, 7.50%, 7.60%, 7.91% and 8.95% for HA5, HAK, HA2, HK5, HK2 and control, respectively. DPPH inhibition percentages of free radical for HA5, HAK, HK5, HA2, HK2 and control mushrooms were 28.03%, 25.24%, 24.96%, 21.87%, 20.56% and 19.06%, respectively, after 9 days of storage. The pressurized argon treatment was the most effective compared to pressurized krypton. Thus, application of pressurized argon and krypton treatments could extend the storage life of white mushrooms to 9 days at 4℃.展开更多
基金Financial support of this work by National Natural Science Foundation of China(51976037)。
文摘The particle residence time distribution(RTD)and axial dispersion coefficient are key parameters for the design and operation of a pressurized circulating fluidized bed(PCFB).In this study,the effects of pressure(0.1-0.6 MPa),fluidizing gas velocity(2-7 m·s^(-1)),and solid circulation rate(10-90 kg·m^(-2)·s^(-1))on particle RTD and axial dispersion coefficient in a PCFB are numerically investigated based on the multiphase particle-in-cell(MP-PIC)method.The details of the gas-solid flow behaviors of PCFB are revealed.Based on the gas-solid flow pattern,the particles tend to move more orderly under elevated pressures.With an increase in either fluidizing gas velocity or solid circulation rate,the mean residence time of particles decreases while the axial dispersion coefficient increases.With an increase in pressure,the core-annulus flow is strengthened,which leads to a wider shape of the particle RTD curve and a larger mean particle residence time.The back-mixing of particles increases with increasing pressure,resulting in an increase in the axial dispersion coefficient.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12174398,12004387,51727806,51672279,11874361,and 12204484)the Innovation Program of Chinese Academy of Sciences(Grant No.CXJJ-19B08)+2 种基金the Youth Innovation Promotion Association of Chinese Academy of Sciences(Grant No.2021446)the HFIPS Director’s Fund of Chinese Academy of Sciences(Grant Nos.2021YZGH03 and YZJJKX202202)China Postdoctoral Science Foundation(Grant No.2021M703255)。
文摘Graphene hosts intriguing photocarrier dynamics such as negative transient terahertz(THz) photoconductivity, high electron temperature, benefiting from the unique linear Dirac dispersion. In this work, the pressure effects of photocarrier dynamics of graphene have been investigated using in situ time-resolved THz spectroscopy in combination with diamond anvil cell exceeding 9 GPa. We find that the negative THz conductivity maintains in our studied pressure range both for monolayer and bilayer graphene. In particular, the amplitude of THz photoconductivity in monolayer graphene manifests an extraordinary dropping with pressure, compared with that from the counterparts such as bulk silicon and bilayer graphene.Concomitantly, the time constant is reduced with increasing pressure, highlighting the pressure-induced hot carrier cooling.The pressure dependence of photocarrier dynamics in monolayer graphene is likely related with the enhancement of the interfacial coupling between diamond surface and sample, allowing for the activity of new electron–phonon scattering. Our work is expected to provide an impetus for the studies of high-pressure THz spectroscopy of two-dimensional materials.
基金Supported by National Key R&D Program of China(Grant No.2022YFB3401901)Key Program of National Natural Science Foundation of China(Grant No.U2067221)+2 种基金Sichuan Provincial Science and Technology Planning Project(Grant Nos.2022JDJQ0019 and 2022ZYD0029)Funds for China Postdoctoral Science Foundation(Grant No.2022M713008)Sichuan Provincial Innovative Talent Funding Project for Postdoctoral Fellows(Grant No.BX202225).
文摘In pressurized water reactor(PWR),fretting wear is one of the main causes of fuel assembly failure.Moreover,the operation condition of cladding is complex and harsh.A unique fretting damage test equipment was developed and tested to simulate the fretting damage evolution process of cladding in the PWR environment.It can simulate the fretting wear experiment of PWR under different temperatures(maximum temperature is 350℃),displacement amplitude,vibration frequency,and normal force.The fretting wear behavior of Zr-4 alloy under different temperature environments was tested.In addition,the evolution of wear scar morphology,profile,and wear volume was studied using an optical microscope(OM),scanning electron microscopy(SEM),and a 3D white light interferometer.Results show that higher water temperature evidently decreased the cladding wear volume,the wear mechanism of Zr-4 cladding changed from abrasive wear to adhesive wear and the formation of an oxide layer on the wear scar reduced the wear volume and maximum wear depth.
文摘In this research,mechanical stress,static strain and deformation analyses of a cylindrical pressure vessel subjected to mechanical loads are presented.The kinematic relations are developed based on higherorder sinusoidal shear deformation theory.Thickness stretching formulation is accounted for more accurate analysis.The total transverse deflection is divided into bending,shear and thickness stretching parts in which the third term is responsible for change of deflection along the thickness direction.The axisymmetric formulations are derived through principle of virtual work.A parametric study is presented to investigate variation of stress and strain components along the thickness and longitudinal directions.To explore effect of thickness stretching model on the static results,a comparison between the present results with the available results of literature is presented.As an important output,effect of micro-scale parameter is studied on the static stress and strain distribution.
基金supported by the National Natural Science Foundation of China(No.11675057)the Fundamental Research Funds for the Central Universities(No.2017ZD100)
文摘In resonance with the Fukushima Daiichi Nuclear Power Plant accident lesson, a novel fuel design to enhance safety regarding severe accident scenarios has become increasingly appreciated in the nuclear power industry. This research focuses on analysis of the neutronic properties of a silicon carbide(SiC) cladding fuel assembly, which provides a greater safety margin as a type of accident-tolerant fuel for pressurized water reactors. The general physical performance of SiC cladding is explored to ascertain its neutronic performance. The neutron spectrum, accumulation of ^(239)Pu, physical characteristics,temperature reactivity coefficient, and power distribution are analyzed. Furthermore, the influences of a burnable poison rod and enrichment are explored. SiC cladding assemblies show a softer neutron spectrum and flatter power distribution than conventional Zr alloy cladding fuel assemblies. Lower enrichment fuel is required when SiC cladding is adopted. However, the positive reactivity coefficient associated with the SiC material remains to be offset. The results reveal that SiC cladding assemblies show broad agreement with the neutronic performance of conventional Zr alloy cladding fuel. In the meantime, its unique physical characteristics can lead to improved safety and economy.
文摘We report the first application of pressurized intraperitoneal aerosol chemotherapy(PIPAC) as a rescue therapy before palliative D2 gastrectomy combined with liver metastasectomy performed in a 49-yearold woman with peritoneal carcinomatosis who was primarily diagnosed with and underwent surgery for a Krukenberg tumor. The PIPAC procedure was performed with the use of cisplatin at 7.5 mg/m2 and doxorubicin at 1.5 mg/m2 for 30 min at 37 ℃. Eight weeks after the PIPAC procedure, the patient underwent open classic D2 gastrectomy with the creation of a Roux-en-Y anastomosis(RNY) combined with liver metastasectomy. The patient underwent the classic protocol for chemotherapy combined with Xeloda. The patient felt better and returned to her daily activities. Multicenter data should be gathered to confirm the usefulness of PIPAC as a rescue or neoadjuvant supportive therapy in a very select group of patients who have been recently qualified to undergo classic chemotherapy or standard oncologic surgical procedures.
基金The study is supported by NNSFC,grant No.20175010.
文摘A novel gradient pressurized capillary electrochromatography (pCEC) instrument was developed to separate peptides. Two gradient elution modes, hydrophobic and hydrophilic interaction mode in pCEC, were performed on this instrument. Baseline separation of six peptides was obtained on two gradient modes with C18 column and strong cationic exchange column respectively. The effects of mixer volume and total flow rate of pumps on resolution were also discussed.
基金supported by National Natural Science Foundation ofChina (Grant No. 50335010)
文摘Externally pressurized spherical air bearings are the key component of the three-axis air bearing table, and the manufacturing errors of the bearing affects the performance of the air bearing table. However, the manufacturing errors are unavoidable, and the pursuit to enhance the manufacturing accuracy will increase the cost greatly. In order to provide some theoretical guideline for the tolerance choice in the design of the externally pressurized spherical air bearings with inherent compensation, the effects of several manufacturing errors on the static characteristics of the air bearing are studied. Due to the complex geometry of the computational domain, an unstructured meshing technology is used for mesh generation. A finite-volume method is adopted to discretize the three-dimensional steady-state compressible Navier-Stokes equations. A modified SIMPLE algorithm which is suitable for compressible flows is applied to solve the discretized governing equations. The effects of the dimension error and the roundness error of the ball head and the ball socket on the static characteristics are investigated. The investigation result shows that the positive dimension error and the oblate spheroid-type roundness error of the ball head as well as the negative dimension error and the prolate spheroid-type roundness error of the ball socket can improve the bearing capacity and static stiffness of the air bearings by reducing the mass flow. The calculation method proposed in this paper fits well for the general principle, which can be extended to the characteristics analysis of other air bearings.
基金Supported by the National Key R&D Program of China(2016YFB0600802)the National Natural Science Foundation of China(51736002)
文摘Nitrogen oxides are one of the most significant pollution sources during coal combustion. This experimental study was conducted in a 15 kWth lab-scale pressurized fluidized bed (inner diameter = 81-100 mm, H = 2100 mm) firing with bituminous coals. The effects of operating parameters, including bed temperature (800℃-900℃), operating pressure (0.1-0.4 MPa), excess air level (16%-30%) and flow pattern on NOX and N2O emissions were systematically studied during the tests. During each test the interaction effects of all the operating parameters were properly controlled. The results show that most operating parameters have an opposite effect on NOX and N2O emissions, and the N2O emissions mainly depend on the bed temperature. Increasing the operating pressure can significantly suppress the fuel-N conversion to NOX but enhance its conversion to N2O. With the rise of the excess air level and fluidization number, NOX emissions grow distinctly while N2O emissions remain almost unchanged. Total nitrogen oxide emissions increase with the bed temperature while decrease with the operating pressure.
基金financial support from the Research Support Foundation of the State of Rio Grande do Sul (Grant No. 00189725.51/13S-I4)
文摘This study investigated the use of leftover biomass(rice husks)as the raw material for the biotechnological production of platform chemicals and biopolymers.Following the biorefinery concept,different acid hydrolysates were studied and resulted into a wide range of treatment strategies.Chemometrics were applied throughout the procedures in multivariate experimental conditions.By using the best hydrolytic conditions of 6.0%H3PO4,135oC(45 MPa)and reaction time of 62 min,21.0 g/L sugar hydrolysates were produced;by using the best hydrolytic condition of 4.5%HNO3,135oC/35 min,16.1 g/L sugar hydrolysates were produced;and with the hydrolysates use of 1.5%H2SO4 and 1.5%HCl,135oC/62 min,18.2 and 17.8 g/L sugar hydrolysates were produced,respectively.The highest productivity,in terms of fermentable sugars,reached 68%of integral cellulose/hemicellulose fraction and surpassed those found in the literature,with regard to the processing of rice husks,by considering just one step process.Sulfuric hydrolysate,detoxified with active carbon,was used to prove this proposal viability,resulting in a fermentation substrate for A.terreus(ATCC10020)and R.radiobacter(LMG196)strains(natural producers of bioproducts),which certified the feasibility of the proposal.The production of fermentable sugars from leftover biomass should encourage a search for new bioconversion routes,which can result in economic and environmental benefits and a spread of knowledge.
文摘Good practices of maintenance optimization in nuclear power field need to be effectively consolidated and inherited,and maintenance optimization can provide technology support to create a long-term reliable and economic operation for nuclear power plants( NPPs) especially for a large number of nuclear powers under construction. Based on the development and application of maintenance template in developed countries,and combining with reliability-centered maintenance( RCM) analysis results and maintenance experience data over the past ten years in domestic NPPs, the development process of maintenance template was presented for Chinese pressurized water reactor( PWR) NPP,and the application of maintenance template to maintenance program development and maintenance optimization combined with cases were demonstrated. A shortcut was provided for improving the efficiency of maintenance optimization in domestic PWR NPP,and help to realize a safe,reliable,and economic operation for domestic NPPs.
基金financial support from the National Science and Technology Major Project of China(Grant No. 2008ZX05018)Taishan Scholar Constructive Engineering Foundation of Shandong province(No. ts20120518)
文摘A study of reaction mechanisms and chemical kinetics of pressurized pyrolysis of Chinese Liushuhe oil shale in the presence of water were conducted using an autoclave for simulating and modeling in-situ underground thermal degradation.It was found that the oil shale was first pyrolyzed to form pyrobitumen,shale oil,shale gas and residue,then the pyrobitumen was further pyrolyzed to form more shale oil,shale gas,and residue.It means that there are two consecutive and parallel reactions.With increasing temperature,the pyrobitumen yield,as intermediate,first reached a maximum,then decreased to approximately zero.The kinetics results show that both these reactions are first order.The activation energy of pyrobitumen formation from oil shale is lower than that of shale oil formation from pyrobitumen.
文摘A new MEEKC method assisted with pressure-driven mobile phase was presented for the separation of felted explosives. Microemulsion solution was composed of 80 mmol/L heptane -120 mmol/L SDS (sodium dodecyl sulphate) - 900 mmol/L butanol - 10 mmol/L borate at pH 9.4 and a pressure-driven flow of 0.020 mL/min under 1.3 MPa was employed to manipulate the separation. Explosives HMX (1, 3, 5, 7-tetranitro-l, 3, 5, 7-tetrazacyclooctane) and TATB (triamino-trinitrobenzene), which were felted on fluorine rubber F2311 (polytrifluorochlorethylene and polyvinylidene fluoride 1/1 co-polymerization) and F2314 (polytrifluorochlorethylene and polyvinylidene fluoride 4/1 co-polymerization) were well separated with very good peak shapes.
基金financial support of the National Natural Science Foundation of China (No. 51422604, 21276206)the National 863 Program of China (No. 2013AA050402)supported by the China Fundamental Research Funds for the Central Universities
文摘In this paper, response surface methodology(RSM) based on central composite design(CCD) is applied to obtain an optimization design for the fuel rod's diameter and distance cooled by turbulent Al_2O_3–water nanofluid for a typical pressurized water reactor(PWR). Fuel rods and nanofluid flow between them are simulated 3D using computational fluid dynamics(CFD) by ANSYS-FLUNET package software. The RNG k–ε model is used to simulate turbulent nanofluid flow between the rods. The effect of different nanoparticles concentration is also investigated on the Nusselt number from heat transfer efficiency view point. Results reveal that when distance parameter(a) is in the minimum level and diameter parameter(r) is in the maximum possible level, cooling the rods will be better due to higher Nusselt number in this situation. Also, using the different nanoparticles on the cooling process confirms that Al_2O_3 averagely 17% and TiO_2 10% improve the Nusselt numbers.
基金Supported by the National Natural Science Foundation of China(Nos 20305004 and 20575012), Program for NewCentury Ex-cellent Talents in University of China(No NCET-04-0612), Specialized Research Fund for the Doctoral Program of Higher Education(No 20050386008), and the Science Foundation of Fujian Province(Nos 2005Y015 and D0510006)
文摘Capillary electrochromatography (CEC) is a hybrid technique that couples the good selectivity of high-performance liquid chromatography (HPLC) and the high separation efficiency of capillary electrophoresis (CE). Both charged and uncharged compounds can be separated effectively using CEC. In some cases, however, the bubbles that generated in the capillary column in pure CEC performed on commercial CE instruments will cause unstable current and even disrupt the separation when the concentration of buffer is very high. By applying pressure on the electrochromatographic separation via a micro-HPLC pump, pressurized capillary electrochromatography ( pCEC ) combines two driving factors of the electroosmotic flow (EOF) and the pressure flow, thereby increasing the speed and the selectivity of separation and suppressing the bubble formation. Moreover,
基金supported by the National Natural Science Foundation of China(21908062)。
文摘A computational study was carried out on bubble dynamic behaviors and bubble size distributions in a pressurized lab-scale gas-solid fluidized bed of Geldart A particles.High-resolution 3-D numerical simulations were performed using the two-fluid model based on the kinetic theory of granular flow.A finegrid,which is in the range of 3–4 particle diameters,was utilized in order to capture bubble structures explicitly without breaking down the continuum assumption for the solid phase.A novel bubble tracking scheme was developed in combination with a 3-D detection and tracking algorithm(MS3 DATA)and applied to detect the bubble statistics,such as bubble size,location in each time frame and relative position between two adjacent time frames,from numerical simulations.The spatial coordinates and corresponding void fraction data were sampled at 100 Hz for data analyzing.The bubble coalescence/break-up frequencies and the daughter bubble size distribution were evaluated by using the new bubble tracking algorithm.The results showed that the bubble size distributed non-uniformly over cross-sections in the bed.The equilibrium bubble diameter due to bubble break-up and coalescence dynamics can be obtained,and the bubble rise velocity follows Davidson’s correlation closely.Good agreements were obtained between the computed results and that predicted by using the bubble break-up model proposed in our previous work.The computational bubble tracking method showed the potential of analyzing bubble motions and the coalescence and break-up characteristics based on time series data sets of void fraction maps obtained numerically and experimentally.
基金This project was funded by the Deanship of Scientific Research(DSR),King Abdulaziz University,Jeddah,Saudi Arabia under grant no.(KEP-Msc-36-135-38).
文摘Tracking load changes in a pressurized water reactor(PWR)with the help of an efficient core power control scheme in a nuclear power station is very important.The reason is that it is challenging to maintain a stable core power according to the reference value within an acceptable tolerance for the safety of PWR.To overcome the uncertainties,a non-integer-based fractional order control method is demonstrated to control the core power of PWR.The available dynamic model of the reactor core is used in this analysis.Core power is controlled using a modified state feedback approach with a non-integer integral scheme through two different approximations,CRONE(Commande Robuste d’Ordre Non Entier,meaning Non-integer orderRobust Control)and FOMCON(non-integer order modeling and control).Simulation results are produced using MATLAB■program.Both non-integer results are compared with an integer order PI(Proportional Integral)algorithm to justify the effectiveness of the proposed scheme.Sate-spacemodel Core power control Non-integer control Pressurized water reactor PI controller CRONE FOMCON.
文摘The design of an integral pressurized water reactor (IPWR) focuses on enhancing the safety and reliability of the reactor by incorporating a number of inherent safety features and engineered safety features. However, the characteristics of passive safety systems for the marine reactors are quiet different from those for the land nuclear power plant because of the more formidable and dangerous operation environments of them. This paper presents results of marine black out accident analyses. In the case of a transient, the passive residual heat removal system (PRHRS) is designed to cool the reactor coolant system (RCS) from a normal operation condition to a hot shutdown condition by a natural circulation, and the shutdown cooling system (SCS) is designed to cool the primary system from a hot shutdown condition to a refueling condition by a forced circulation. A realistic calculation has been carried out by using the RELAP5/MOD3.4 code and a sensitivity analysis has been performed to evaluate a passive cooldown capability. The results of the accident analyses show that the reactor coolant system and the passive residual heat removal system adequately remove the core decay heat by a natural circulation.
文摘The objective of this study is to specify the effect of pressurized soy protein isolate (pSPI), upon the physical development, growth hormones and antioxidants functions of SD rats. The methodology depends on the selection of one hundred male SD rats, divided randomly into 5 groups. Each group consists of 20 rats. The groups will be defined as one blank control group, three groups with pSPI at low, medium and high doses and another control group with native soy protein isolates (nSPI). Low, medium and high doses are represented by 0.333 g/kg, 1.667 g/kg and 3.333 g/kg pSPI per weight, respectively. The native soy protein isolate is represented by 3.333 g/kg nSPI per weight. In every group, four animals will be taken out to collect the blood samples and analyze insulin like growth factor-I, growth hormone, thyroid stimulating hormone, thyroxine and triiodothyronin. The other SD rats will be subjected to feeding for 63 consecutive days. The body weight, the body length and food intake of each rat are measured. The total antioxidant capacity, superoxide dismutase (SOD), malondialdehyde and Glutathione Peroxidase in liver and serum of each rat will be analyzed. The results indicated that the groups with medium and high dose of pSPI result in an obvious increase in the body weight, body length and food utilization rate of SD rats. Also, pSPI has a great effect on the growth and antioxidants functions of SD rat.
文摘Effects of argon, krypton and their mixed pressure treatments on the quality of white mushrooms were studied during 9 days of storage at 4℃. Among all treatments in this study, the minimum respiration rate, polyphenoloxidase activity, retained color change, antioxidants and delayed pseudomonas growth were observed with pressure argon (5 MPa) followed by mixing argon and krypton (2.5 MPa each) treatments. Respiration rates after 9 days of storage were 5.35%, 6.20%, 7.50%, 7.60%, 7.91% and 8.95% for HA5, HAK, HA2, HK5, HK2 and control, respectively. DPPH inhibition percentages of free radical for HA5, HAK, HK5, HA2, HK2 and control mushrooms were 28.03%, 25.24%, 24.96%, 21.87%, 20.56% and 19.06%, respectively, after 9 days of storage. The pressurized argon treatment was the most effective compared to pressurized krypton. Thus, application of pressurized argon and krypton treatments could extend the storage life of white mushrooms to 9 days at 4℃.