To obtain the relationship between use of installment tensioning technology and the bearing capacity of prestressed concrete beams, tensile and cyclic loading tests are conducted on five rectangular prestressed concre...To obtain the relationship between use of installment tensioning technology and the bearing capacity of prestressed concrete beams, tensile and cyclic loading tests are conducted on five rectangular prestressed concreted specimens. Two types of prestressed tensioning methods are adopted in the tests, one uses installment tensioning technology to tension beams on days 4, 12, and 8, 12, respectively, and the other adopts the conventional method to tension the beam on day 28 only. The age of concrete, number of times tensioned, and the prestress value of early tensioning are considered in tests. Results show that use of installment tensioning technology has no effect on the bending failure pattern of prestressed concrete beams, but it reduces prestress loss and increases crack and yield loads.展开更多
Starting from the ideas of Conventional Post Tensioning we present a heuristic argument of advantages of combined actions of post compression along with post tensioned technique for a PSC member through a Design Examp...Starting from the ideas of Conventional Post Tensioning we present a heuristic argument of advantages of combined actions of post compression along with post tensioned technique for a PSC member through a Design Example. Our aim was to assess the characterization of a pre stressed member if it was?to be under the Load effects of post compressing a bar with post tensioned method through hydraulic jacks as the reinforcements in the tensioned zone of conventional PSC bridge were to be compressed in order to induce internal tensile stress similar to internal compressive stresses developed due to conventional post tensioned design. The results ultimately concluded that post compressing a Slender bar by a pre stressing force in the compression zone by a value equal to 0.1?-?0.7 times the pre stressing force in the tension zone would eventually lead to cancelling out of tensile and compressive stresses, thereby forming the desired section which is comparatively smaller in size but can account for sustainability. The anchorage at the top end was?provided by special slender steel rods to eliminate the compressive stresses. All the dead loads?were?counteracted by the action of prestress and the bridge section was able to carry only live load which is deduced through examples in the article.展开更多
基金supported by the National Natural Science Foundation of China (No. 51379142)
文摘To obtain the relationship between use of installment tensioning technology and the bearing capacity of prestressed concrete beams, tensile and cyclic loading tests are conducted on five rectangular prestressed concreted specimens. Two types of prestressed tensioning methods are adopted in the tests, one uses installment tensioning technology to tension beams on days 4, 12, and 8, 12, respectively, and the other adopts the conventional method to tension the beam on day 28 only. The age of concrete, number of times tensioned, and the prestress value of early tensioning are considered in tests. Results show that use of installment tensioning technology has no effect on the bending failure pattern of prestressed concrete beams, but it reduces prestress loss and increases crack and yield loads.
文摘Starting from the ideas of Conventional Post Tensioning we present a heuristic argument of advantages of combined actions of post compression along with post tensioned technique for a PSC member through a Design Example. Our aim was to assess the characterization of a pre stressed member if it was?to be under the Load effects of post compressing a bar with post tensioned method through hydraulic jacks as the reinforcements in the tensioned zone of conventional PSC bridge were to be compressed in order to induce internal tensile stress similar to internal compressive stresses developed due to conventional post tensioned design. The results ultimately concluded that post compressing a Slender bar by a pre stressing force in the compression zone by a value equal to 0.1?-?0.7 times the pre stressing force in the tension zone would eventually lead to cancelling out of tensile and compressive stresses, thereby forming the desired section which is comparatively smaller in size but can account for sustainability. The anchorage at the top end was?provided by special slender steel rods to eliminate the compressive stresses. All the dead loads?were?counteracted by the action of prestress and the bridge section was able to carry only live load which is deduced through examples in the article.
