Combining lymph node ratio to develop prognostic models for postoperative gastric neuroendocrine neoplasm patients

BACKGROUND Lymph node ratio(LNR)was demonstrated to play a crucial role in the prognosis of many tumors.However,research concerning the prognostic value of LNR in postoperative gastric neuroendocrine neoplasm(NEN)patients was limited.AIM To explore the prognostic value of LNR in postoperative gastric NEN patients and to combine LNR to develop prognostic models.METHODS A total of 286 patients from the Surveillance,Epidemiology,and End Results database were divided into the training set and validation set at a ratio of 8:2.92 patients from the First Affiliated Hospital of Soochow University in China were designated as a test set.Cox regression analysis was used to explore the relationship between LNR and disease-specific survival(DSS)of gastric NEN patients.Random survival forest(RSF)algorithm and Cox proportional hazards(CoxPH)analysis were applied to develop models to predict DSS respectively,and compared with the 8th edition American Joint Committee on Cancer(AJCC)tumornode-metastasis(TNM)staging.RESULTS Multivariate analyses indicated that LNR was an independent prognostic factor for postoperative gastric NEN patients and a higher LNR was accompanied by a higher risk of death.The RSF model exhibited the best performance in predicting DSS,with the C-index in the test set being 0.769[95%confidence interval(CI):0.691-0.846]outperforming the CoxPH model(0.744,95%CI:0.665-0.822)and the 8th edition AJCC TNM staging(0.723,95%CI:0.613-0.833).The calibration curves and decision curve analysis(DCA)demonstrated the RSF model had good calibration and clinical benefits.Furthermore,the RSF model could perform risk stratification and individual prognosis prediction effectively.CONCLUSION A higher LNR indicated a lower DSS in postoperative gastric NEN patients.The RSF model outperformed the CoxPH model and the 8th edition AJCC TNM staging in the test set,showing potential in clinical practice.

Empirical Analysis of the Relationship between Price-Earnings Ratio and the Development of the Capital Markets

On the one hand,the P/E ratio measures growth opportunity,bubble level,and investment value of a company.On the other hand,the calculation of P/E is rather simple and convenient,and therefore considerably popular.This article selects the monthly data for five years from 2012 to 2017,of all Shanghai A shares to conduct an empirical analysis.Based on the Gordon model,macroeconomic variables,time variable,technical indicators,and other variables are introduced to reflect the actual price-earnings ratio.This article innovatively introduces the OBV energy wave indicator in empirical research to measure the influence of market heat and investor sentiment on the price-earnings ratio.This paper regresses both on the whole data and on the data grouped according to the average earnings per share,and concludes that P/E estimated by Gordon model,company size,and time factor have a considerable degree of explanation for the actual price-earnings ratio,and the innovative introduction of OBV energy wave indicator also shows significant correlation and explanation.

Model-based evaluation on the conversion ratio of ammonium to nitrite in a nitritation process for ammonium-rich wastewater treatment

Modeling for nitritation process was discussed and analyzed quantitatively for the factors that influence nitrite accumulation. The results indicated that pH, inorganic carbon source and Hydraulic Retention Time(HRT) as well as biomass concentration are the main factors that influenced the conversion ratio of ammonium to nitrite. A constant high pH can lead to a high nitritation rate and results in high conversion ratio on condition that free ammonia inhibition do not happen. In a CSTR system, without pH control, this conversion ratio can be monitored by pH variation in the reactor. The pH goes down far from the inlet level means a strongly nitrite accumulation. High concentration of alkalinity can promoted the conversion ratio by means of accelerating the nitritation rate through providing sufficient inorganic carbon source(carbon dioxide). When inorganic carbon source was depleted, the nitritation process stopped. HRT adjustment could be an efficient way to make the nitritation system run more flexible, which to some extent can meet the requirements of the fluctuant of inlet parameters such as ammonium concentration, pH, and temperature and so on. Biomass concentration is the key point, especially for a CSTR system in steady state, which was normally circumscribed by the characteristics of bacteria and may also affected by aeration mode and can be increased by prolonging the HRT on the condition of no nitrate accumulation when no recirculation available. The higher the biomass concentration is, the better the nitrite accumulation can be obtained.

Simulation research on monomer agglomeration of nonmetallic inclusions in steel with a diffusion limited aggregation model

The monomer agglomeration of nonmetallic inclusions was simulated with a diffusion limited aggregation （DLA） model of the fractal theory. The simulation study with a random two-dimensional diffusion was carried out. The results indicate that the DLA model can be used for the simulation of agglomeration behavior of the cluster-type inclusions. The morphology of clusters was observed with SEM and compared with the simulated agglomerates. The modelling procedure of the DLA model is applicable for the agglomeration process. The uncertainty of agglomeration process and the persuasive average agglomerative ratio was analyzed. The factors about the agglomerative ratio with the collision path distance and the size of particles or seed were discussed. The adherence of the nonmetallic inclusions on the dam, the weir and the walls of a tundish, and the absorption of inclusions by stopper or nozzle were also discussed.

On the Elastic Vibration Model for High Length-Diameter Ratio Rocket with Attitude Control System

An elastic vibration model for high length diameter ratio spinning rocket with attitude control system which can be used for trajectory simulation is established. The basic theory of elastic dynamics and vibration dynamics were both used to set up the elastic vibration model of rocket body. In order to study the problem more conveniently, the rocket's body was simplified to be an even beam with two free ends. The model was validated by simulation results and the test data.

A multicomponent multiphase lattice Boltzmann model with large liquid–gas density ratios for simulations of wetting phenomena

A multicomponent multiphase（MCMP） pseudopotential lattice Boltzmann（LB） model with large liquid–gas density ratios is proposed for simulating the wetting phenomena. In the proposed model, two layers of neighboring nodes are adopted to calculate the fluid–fluid cohesion force with higher isotropy order. In addition, the different-time-step method is employed to calculate the processes of particle propagation and collision for the two fluid components with a large pseudoparticle mass contrast. It is found that the spurious current is remarkably reduced by employing the higher isotropy order calculation of the fluid–fluid cohesion force. The maximum spurious current appearing at the phase interfaces is evidently influenced by the magnitudes of fluid–fluid and fluid–solid interaction strengths, but weakly affected by the time step ratio.The density ratio analyses show that the liquid–gas density ratio is dependent on both the fluid–fluid interaction strength and the time step ratio. For the liquid–gas flow simulations without solid phase, the maximum liquid–gas density ratio achieved by the present model is higher than 1000：1. However, the obtainable maximum liquid–gas density ratio in the solid–liquid–gas system is lower. Wetting phenomena of droplets contacting smooth/rough solid surfaces and the dynamic process of liquid movement in a capillary tube are simulated to validate the proposed model in different solid–liquid–gas coexisting systems. It is shown that the simulated intrinsic contact angles of droplets on smooth surfaces are in good agreement with those predicted by the constructed LB formula that is related to Young＇s equation. The apparent contact angles of droplets on rough surfaces compare reasonably well with the predictions of Cassie＇s law. For the simulation of liquid movement in a capillary tube, the linear relation between the liquid–gas interface position and simulation time is observed, which is identical to the analytical prediction. The simulation results regarding the wetting phenomena of droplets on smooth/rough surfaces and the dynamic process of liquid movement in the capillary tube demonstrate the quantitative capability of the proposed model.

Development and experimental validation of a one-dimensional dynamic hygrothermal modeling based on air humidity ratio

A modified one-dimensional transient hygrothermal model for multilayer wall was proposed using air humidity ratio and temperature as the driving potentials.The solution for the governing equations was obtained numerically by implementing the finite-difference scheme.To evaluate the accuracy of the model,a test system was built up to measure relative humidity and temperature within a porous wall and compare with the prediction of the model.The prediction results have good agreement with the experimental results.For the interface close to indoor side,the maximum deviation of temperature between calculated and test data is 1.87 K,and the average deviation is 0.95 K;the maximum deviation of relative humidity is 11.4%,and the average deviation is 5.7%.For the interface close to outdoor side,the maximum deviation of temperature between prediction and measurement is 1.78 K,and the average deviation is 1.1 K;the maximum deviation of relative humidity is 9.9%,and the average deviation is 4.2%.

Ratio of Real to Imaginary for pp and pp Elastic Scatterings in QCD Inspired Model

We use the QCD inspired model to analyze the ratio of the real to the imaginary for pp and pp elastic scatterings. A calculation for the ratio of the real to the imaginary is performed in which the contributions from gluongluon interaction, quark-quark interaction, quark-gluon interaction, and odd eikonal profile function are included. Our results show that the QCD inspired model gives a good fit to the LHC experimental data.

Multi-exponential model to describe pressure-dependent P-and S-wave velocities and its use to estimate the crack aspect ratio

We present new quantitative model describing the pressure dependence of acoustic P-and S-wave velocities.Assuming that a variety of individual mechanisms or defects(such as cracks,pore collapse and grain crushing)can contribute to the pressure-dependent change of the wave velocity,we order a characteristic pressure to all of them and allow a series of exponential terms in the description of the(Pand S-waves)velocity-pressure function.We estimate the parameters of the multi-exponential rock physical model in inversion procedures using laboratory measured P-and S-wave velocity data.As is known,the conventional damped least squares method gives acceptable results only when one or two individual mechanisms are assumed.Increasing the number of exponential terms leads to highly nonlinear ill-posed inverse problem.Due to this reason,we develop the spectral inversion method(SIM)in which the velocity amplitudes(the spectral lines in the characteristic pressure spectrum)are only considered as unknowns.The characteristic pressures(belonging to the velocity amplitudes)are excluded from the set of inversion unknowns,instead,they are defined in a set of fixed positions equidistantly distributed in the actual interval of the independent variable(pressure).Through this novel linear inversion method,we estimate the parameters of the multi-exponential rock physical model using laboratory measured P-and S-wave velocity data.The characteristic pressures are related to the closing pressures of cracks which are described by well-known rock mechanical relationships depending on the aspect ratio of elliptical cracks.This gives the possibility to estimate the aspect ratios in terms of the characteristic pressures.

A Simple Cement Hydration Model Considering the Influences ofWater-to-Cement Ratio and Mineral Composition

A simple hydration model is used here by taking the composition of the cement and the initial water: cementratio (w/c) into account explicitly. Its conceptual basis is a combination of the Avrami equation and Bentz’s modelbased on simple spatial considerations. In this model, the Avrami equation determines the initial reaction, andBentz’s model describes the following hydration stage. The model favors engineers for it relies on one experimentalparameter and has a reliable approximation in the practice.

Model test of negative Poisson’s ratio cable for supporting super-largespan tunnel using excavation compensation method

In recent years,there is a scenario in urban tunnel constructions to build super-large-span tunnels for traffic diversion and route optimization purposes.However,the increased size makes tunnel support more difficult.Unfortunately,there are few studies on the failure and support mechanism of the surrounding rocks in the excavation of supported tunnel,while most model tests of super-large-span tunnels focus on the failure characteristics of surrounding rocks in tunnel excavation without supports.Based on excavation compensation method(ECM),model tests of a super-large-span tunnel excavation by different anchor cable support methods in the initial support stage were carried out.The results indicate that during excavation of super-large-span tunnel,the stress and displacement of the shallow surrounding rocks decrease,following a step-shape pattern,and the tunnel failure is mainly concentrated on the vault and spandrel areas.Compared with conventional anchor cable supports,the NPR(negative Poisson’s ratio)anchor cable support is more suitable for the initial support stage of the super-large-span tunnels.The tunnel support theory,model test materials,methods,and the results obtained in this study could provide references for study of similar super-large-span tunnels。

Structural Modeling and Aeroelastic Analysis of High-Aspect-Ratio Composite Wings

A unified structural model for high-aspect-ratio composite wing with arbitrary cross-section is developed. Two types of lay-ups of the composite wing, namely, circumferentially uniform stiffness （CUS） configuration and circumferentially asymmetric stiffness （CAS） configuration, are investigated. The present structural modeling method is validated through ANSYS FEM software for the case of a composite box beam. Then, the case of a single-cell composite wing with NACA0012 airfoil shape is considered. To investigate the aeroelastic problem of high-aspect-ratio composite wings, the linear ONERA aerodynamic model is used to model the unsteady aerodynamic loads under the case of small angle of attack. Finally, flutter speeds of the high-aspect-ratio wing with various composite ply angles are determined by using U-g method.

Existence of two periodic solutions of a ratio-dependent Holling-Taner model with infinite delay and prey harvest

This paper considers a class of ratio-dependent Holling-Taner model with infinite delay and prey harvest, which is of periodic coefficients. By means of the coincidence degree theory, a set of sufficient conditions for the existence of at least two positive periodic solutions of this model is established.

An improved lattice Boltzmann model for high gas and liquid density ratio in composite grids

Lattice Boltzmann method is one of the widely used in multiphase fluid flow.However,the two main disadvantages of this method are the instability of numerical calculations due to the large density ratio of two phases and impossibility of the temperature distribution to be fed back into the velocity distribution function when the temperature is simulated.Based on the combination prescribed by Inamuro,the large density ratio two-phase flow model and thermal model makes the density ratio of the model simulation to be increased to 2778:1 by optimizing the interface distribution function of two-phase which improves the accuracy of differential format.The phase transition term is added as source term into the distribution function controlling two phase order parameters to describe the temperature effect on the gas-liquid phase transition.The latent heat generated from the phase change is also added as a source term into the temperature distribution function which simulates the movement of the flow under the common coupling of density,velocity,pressure and temperature.The density and the temperature distribution of single bubble are simulated.Comparison of the simulation results with experimental results indicates a good agreement pointing out the effectiveness of the improved model.

Grade-Tonnage, Ore Value-Tonnage, andEnrichment Ratio-Tonnage Models forResource Assessment

According to grade-tonnage diagrams of nickel and zinc deposits, their critical grades are 0.4 % and 3. 4 %, respectively, and hence the former resources can be considered optimistic and the latter pessimistic. The grade-tonnage diagram of gold deposits is convex downwards suggesting that the critical grade is 1 X 10-6 in the low-grade part. The ore value (OV)-tonnage diagram of all deposits In the world consists of three parts: high, middle and low vain f classes. The enrichment ratio (ER)-tonnage diagram of all deposits in the world ho consists of three parts: high, middle and low ratio classes.Nine quality categories defined by ER and OV are characterized by some keywords indicating deposit types as follows: category RH (high ER-high OV: 0. 7 %) by 'unconformity' and 'Mississippi Val-ley', category HM (high ER-middle: OV: 0.7 %) by 'vein', category ML (middle ER-low OV: 0 %) by 'sandstone', 'stockwork' and' dissemination', category LM by 'orthomagmatic',' laterite',komatiite and ' chemical', and category LL by 'porphyry', 'dissemination' and 'placer'. Category MM is not characterized by any keyword. If the commodities of a deposit are defined by both the enrichment ratio and the ore value, the defined commodities are relatively coincident for gold and nickel,but different for copper, silver and zinc, and greatly different for molybdenum and lead. Deposits containing lead and/or zinc are complimentary. If the commodity Ph+Zn is applied, most lead or zinc deposits are classified as Ph+Zu by both definitions. Accessory metals are commonly expected for deposits of kuroko-type zinc, epithermal silver, massive sulfide-type zinc and volcanogenic zinc, but uncommon for deposits of orthomagmatic chromium, chemically precipitated copper and sandstone-type uranium.

Appraisement on Contributive Ratio of Scientific and Technical Progresses in Milk Productive Enterprises by Model C^2GS^2

Scientific and technical progress has been the driving forces of enterprises development.Milk productive enterprises are developing faster and growing better.It is very important to measure the contributive ratio of scientific and technical progress in milk productive enterprises.And the appraisement could help to develop milk productive enterprises.The model C^2GS^2 was established to appraise the contributive ratio of scientific and technical progress in milk productive enterprises in the research.And the appraisement on the contributive ratio of scientific and technical progress in milk productive enterprises was made by the model.In the results of appraisement,science and technology play a main role in milk productive enterprises.It is shown that our milk productive enterprises are developed by scientific and technical progress while not by input of productive factors.

Evapotranspiration Characteristics of a Lowland Dry Evergreen Forest in Central Cambodia Examined Using a Multilayer Model

Development pressure has led to serious deforestation on the Indochina Peninsula. Particularly rapid defor-estation has occurred in easily accessible lowland areas, and it is thus important to accumulate knowledge about these forests immediately. We measured evapotranspiration rates for a lowland dry evergreen forest in Kampong Thom Province, central Cambodia, using the energy balance Bowen ratio (EBBR) method based on meteorological data collected from a 60-m-high observation tower. Daily evapotranspiration was higher during the dry season than during the rainy season of the Asian monsoon climate. The seasonal variation in evapotranspiration generally corresponded to the seasonal difference in the vapor pressure deficit. A multi-layer model was used to simulate the seasonal variation in evapotranspiration. The multilayer model also reproduced the larger evapotranspiration rate in the dry season than in the rainy season. However, observed values substantially exceeded model-calculated results during certain periods at the beginning of the dry season and in the late dry season. Moreover, during the rainy season, the model tended to overestimate evapotranspiration. The differences between these observed and simulated values may have been caused by seasonal characteristics of photosynthesis and transpiration in the lowland dry evergreen forest that were not considered in the model simulation.

Simulation Modeling and Analysis of Operator-Machine Ratio

Based on a simulation model of a semiconductor manufacturer, operator-machine ratio （OMR） analysis is made using work study and time study. Through sensitivity analysis, it is found that labor utilization decreases with the increase of lot size. Meanwhile, it is able to identify that the OMR for this company should be improved from 1 ： 3 to 1 ： 5. An application result shows that the proposed model can effectively improve the OMR by 33%.

Study of Ratio of Proton Momentum Distributions with a Chiral Quark Model

The ratio between the anomalous magnetic moments of proton and neutron has recently been suggested to be connected to the ratio of proton momentum fractions carried by the valence quarks inside it. This moment fraction ratio is respectively evaluated by using constituent quark model and chiral quark model in order to check meson cloud effect. Our results show that the meson cloud effect is remarkable to the ratio of the proton momentum fractions, and therefore, this ratiois a sensitive test for the meson cloud effect as well as for the SU(6) symmetry breaking effect.

Generalized Likelihood Ratio Tests for Varying-Coefficient Models with Censored Data

In this paper, we extend the generalized likelihood ratio test to the varying-coefficient models with censored data. We investigate the asymptotic behavior of the proposed test and demonstrate that its limiting null distribution follows a distribution, with the scale constant and the number of degree of freedom being independent of nuisance parameters or functions, which is called the wilks phenomenon. Both simulated and real data examples are given to illustrate the performance of the testing approach.