Using deep neural networks coupled with principal component analysis for ore production forecasting at open-pit mines

Ore production is usually affected by multiple influencing inputs at open-pit mines.Nevertheless,the complex nonlinear relationships between these inputs and ore production remain unclear.This becomes even more challenging when training data(e.g.truck haulage information and weather conditions)are massive.In machine learning(ML)algorithms,deep neural network(DNN)is a superior method for processing nonlinear and massive data by adjusting the amount of neurons and hidden layers.This study adopted DNN to forecast ore production using truck haulage information and weather conditions at open-pit mines as training data.Before the prediction models were built,principal component analysis(PCA)was employed to reduce the data dimensionality and eliminate the multicollinearity among highly correlated input variables.To verify the superiority of DNN,three ANNs containing only one hidden layer and six traditional ML models were established as benchmark models.The DNN model with multiple hidden layers performed better than the ANN models with a single hidden layer.The DNN model outperformed the extensively applied benchmark models in predicting ore production.This can provide engineers and researchers with an accurate method to forecast ore production,which helps make sound budgetary decisions and mine planning at open-pit mines.

Integrated classification method of tight sandstone reservoir based on principal component analysise simulated annealing genetic algorithmefuzzy cluster means

In this research,an integrated classification method based on principal component analysis-simulated annealing genetic algorithm-fuzzy cluster means(PCA-SAGA-FCM)was proposed for the unsupervised classification of tight sandstone reservoirs which lack the prior information and core experiments.A variety of evaluation parameters were selected,including lithology characteristic parameters,poro-permeability quality characteristic parameters,engineering quality characteristic parameters,and pore structure characteristic parameters.The PCA was used to reduce the dimension of the evaluation pa-rameters,and the low-dimensional data was used as input.The unsupervised reservoir classification of tight sandstone reservoir was carried out by the SAGA-FCM,the characteristics of reservoir at different categories were analyzed and compared with the lithological profiles.The analysis results of numerical simulation and actual logging data show that:1)compared with FCM algorithm,SAGA-FCM has stronger stability and higher accuracy;2)the proposed method can cluster the reservoir flexibly and effectively according to the degree of membership;3)the results of reservoir integrated classification match well with the lithologic profle,which demonstrates the reliability of the classification method.

WEB SERVICE SELECTION ALGORITHM BASED ON PRINCIPAL COMPONENT ANALYSIS

Existing Web service selection approaches usually assume that preferences of users have been provided in a quantitative form by users. However, due to the subjectivity and vagueness of preferences, it may be impractical for users to specify quantitative and exact preferences. Moreover, due to that Quality of Service (QoS) attributes are often interrelated, existing Web service selection approaches which employ weighted summation of QoS attribute values to compute the overall QoS of Web services may produce inaccurate results, since they do not take correlations among QoS attributes into account. To resolve these problems, a Web service selection framework considering user's preference priority is proposed, which incorporates a searching mechanism with QoS range setting to identify services satisfying the user's QoS constraints. With the identified service candidates, based on the idea of Principal Component Analysis (PCA), an algorithm of Web service selection named PCA-WSS (Web Service Selection based on PCA) is proposed, which can eliminate the correlations among QoS attributes and compute the overall QoS of Web services accurately. After computing the overall QoS for each service, the algorithm ranks the Web service candidates based on their overall QoS and recommends services with top QoS values to users. Finally, the effectiveness and feasibility of our approach are validated by experiments, i.e. the selected Web service by our approach is given high average evaluation than other ones by users and the time cost of PCA-WSS algorithm is not affected acutely by the number of service candidates.

Tool Health Condition Recognition Method for High Speed Milling of Titanium Alloy Based on Principal Component Analysis (PCA) and Long Short Term Memory (LSTM)

The healthy condition of the milling tool has a very high impact on the machining quality of the titanium components.Therefore,it is important to recognize the healthy condition of the tool and replace the damaged cutter at the right time.In order to recognize the health condition of the milling cutter,a method based on the long short term memory(LSTM)was proposed to recognize tool health state in this paper.The various signals collected in the tool wear experiments were analyzed by time-domain statistics,and then the extracted data were generated by principal component analysis(PCA)method.The preprocessed data extracted by PCA is transmitted to the LSTM model for recognition.Compared with back propagation neural network(BPNN)and support vector machine(SVM),the proposed method can effectively utilize the time-domain regulation in the data to achieve higher recognition speed and accuracy.

Polarimetric Meteorological Satellite Data Processing Software Classification Based on Principal Component Analysis and Improved K-Means Algorithm

With the increasing variety of application software of meteorological satellite ground system, how to provide reasonable hardware resources and improve the efficiency of software is paid more and more attention. In this paper, a set of software classification method based on software operating characteristics is proposed. The method uses software run-time resource consumption to describe the software running characteristics. Firstly, principal component analysis (PCA) is used to reduce the dimension of software running feature data and to interpret software characteristic information. Then the modified K-means algorithm was used to classify the meteorological data processing software. Finally, it combined with the results of principal component analysis to explain the significance of various types of integrated software operating characteristics. And it is used as the basis for optimizing the allocation of software hardware resources and improving the efficiency of software operation.

FUZZY WITHIN-CLASS MATRIX PRINCIPAL COMPONENT ANALYSIS AND ITS APPLICATION TO FACE RECOGNITION

Matrix principal component analysis （MatPCA）, as an effective feature extraction method, can deal with the matrix pattern and the vector pattern. However, like PCA, MatPCA does not use the class information of samples. As a result, the extracted features cannot provide enough useful information for distinguishing pat- tern from one another, and further resulting in degradation of classification performance. To fullly use class in- formation of samples, a novel method, called the fuzzy within-class MatPCA （F-WMatPCA）is proposed. F-WMatPCA utilizes the fuzzy K-nearest neighbor method（FKNN） to fuzzify the class membership degrees of a training sample and then performs fuzzy MatPCA within these patterns having the same class label. Due to more class information is used in feature extraction, F-WMatPCA can intuitively improve the classification perfor- mance. Experimental results in face databases and some benchmark datasets show that F-WMatPCA is effective and competitive than MatPCA. The experimental analysis on face image databases indicates that F-WMatPCA im- proves the recognition accuracy and is more stable and robust in performing classification than the existing method of fuzzy-based F-Fisherfaces.

基于RS-PCA-SVM的建筑项目安全预测模型

为了减少建筑项目安全事故的发生,文章提出一种基于RS-PCA-SVM建筑项目安全组合预测模型,采用粗糙集理论(rough set,RS)对数据进行属性约简,剔除交叉和冗余信息,降低输入变量维数和计算复杂度,减少训练时间;利用主成分分析(principal component analysis,PCA)法进行降维处理,除去贡献率较低的主成分,将剩余主成分作为支持向量机(support vector machine,SVM)的输入变量,并选择自适应权重粒子群优化算法(particle swarm optimization,PSO)优化SVM的参数,避免参数选择的盲目性。结果表明:该模型的平均预测准确率为93.78%,相比传统方法预测精度高、计算速度快。

基于粗糙集理论与PCA-APSO-SVM的沥青路面使用性能预测

针对传统沥青路面使用性能预测精度较低的问题,建立了基于粗糙集理论(rough set,RS)与主成分分析法(principal compoent analysis,PCA)-自适应粒子群算法(adaptive particle swarm optimization,APSO)-支持向量机(support vector machine,SVM)的沥青路面使用性能预测模型。基于沥青路面的时序指标与影响因素指标,建立了11个初始预测指标(包括前3年的路面使用性能、当量轴次、路龄、养护性质、坑槽率、修补率、年降水量、平均气温、日照时数);通过RS属性约减筛选出9个核心指标;利用PCA提取4个主成分,得到了基于4个主成分的数据集;将APSO引入到SVM中,对数据集进行训练,并优化了SVM模型参数;建立了路面使用性能的PCA-APSO-SVM预测模型,并以G6京藏高速甘肃境内某段道路为例,对路面使用性能进行预测。研究结果表明:PCA-APSO-SVM模型预测精度较PCA-PSO-SVM、APSO-SVM、PSO-SVM有较大提高,预测结果与实际情况更加符合,能为路面养护决策提供相关参考。

GA-PCA模型在高校教育管理中的应用效果研究

教育管理系统中存储着大量的学生成绩数据,为了更好地挖掘这些数据潜在信息,推动教育管理的进一步发展,该文利用模糊神经网络对学生成绩进行预测分析,通过主成分分析方法对多维数据进行降维,采用遗传算法对模糊神经网络的前件参数进行优化,通过仿真实验对模型进行性能验证.结果表明,改进的模型相较于原模型具有显著的性能提升,拟合性与预测精度均发生明显变化,故构建的学生学习预测模型具有较好的性能,能够应用于高校教育管理.

基于KPCA特征量降维的风电并网系统暂态电压稳定性评估

针对电力系统暂态电压稳定性评估中所需特征量数据庞大,影响模型训练时间,降低计算效率等问题,提出了一种基于核主成分分析方法KPCA和CPSO-BP组合的风电并网系统暂态电压稳定性评估方法.首先根据输入特征采集原始特征集,采用核主成分分析算法对特征量进行非线性数据处理,提取出最优的特征集.然后将降维后的特征集作为CPSO-BP神经网络输入量进行监督学习,将得到的模型按照临界故障切除时间裕度值的大小进行分类,将分类后的样本进行风电并网系统的暂态电压稳定性评估和临界故障切除时间裕度值预测.仿真分析结果表明,对输入特征进行降维,保留重要输入特征量,剔除冗余特征量,不仅简化了模型,还提高了网络评估的准确性和计算效率.

基于KPCA-WOA-SVM的住宅工程造价预测

在项目决策阶段,准确预测住宅工程造价对提高工程项目决策的科学性至关重要,引入人工智能及机器技术能进一步提高预测的精准度。通过文献梳理,确定决策阶段住宅工程造价的影响指标,用核主成分分析(KPCA)对影响指标进行降维,利用鲸鱼优化算法(WOA)确定支持向量机(SVM)的惩罚参数与核参数,最终构建基于KPCA-WOA-SVM的住宅工程造价预测模型。采用江苏省近5年的70组住宅工程造价数据对模型进行验证,结果表明:与BP神经网络模型、SVM模型和WOA-SVM模型相比,KPCA-WOA-SVM模型预测精准度更高,适用性更好。

基于PCA-PSO-ELM模型预测地震死亡人数研究

筛选42个历史地震震例,对地震震级、震源深度、震中烈度、抗震设防烈度、震中烈度与抗震设防烈度之差(ΔL)、人口密度以及发震时刻7个影响指标进行主成分分析(principal components analysis,PCA),构建粒子群优化(particle swarm optimization,PSO)极限学习机(extreme learning machine,ELM)地震死亡人数预测模型。将37个震例数据进行预处理和训练,并使用5个震例数据来检验模型的预测精度。实验结果表明,该PCA-PSO-ELM组合模型的平均误差率为10.87%,相比于PCA-ELM模型和ELM模型,其平均误差率分别降低8.70个百分点和18.38个百分点。因此,采用PCA-PSO-ELM组合模型预测地震死亡人数具有一定的可行性。

Comprehensive multivariate grey incidence degree based on principal component analysis

To overcome the too fine-grained granularity problem of multivariate grey incidence analysis and to explore the comprehensive incidence analysis model, three multivariate grey incidences degree models based on principal component analysis （PCA） are proposed. Firstly, the PCA method is introduced to extract the feature sequences of a behavioral matrix. Then, the grey incidence analysis between two behavioral matrices is transformed into the similarity and nearness measure between their feature sequences. Based on the classic grey incidence analysis theory, absolute and relative incidence degree models for feature sequences are constructed, and a comprehensive grey incidence model is proposed. Furthermore, the properties of models are researched. It proves that the proposed models satisfy the properties of translation invariance, multiple transformation invariance, and axioms of the grey incidence analysis, respectively. Finally, a case is studied. The results illustrate that the model is effective than other multivariate grey incidence analysis models.

Laser-induced breakdown spectroscopy applied to the characterization of rock by support vector machine combined with principal component analysis

Laser-induced breakdown spectroscopy（LIBS） is a versatile tool for both qualitative and quantitative analysis.In this paper,LIBS combined with principal component analysis（PCA） and support vector machine（SVM） is applied to rock analysis.Fourteen emission lines including Fe,Mg,Ca,Al,Si,and Ti are selected as analysis lines.A good accuracy（91.38% for the real rock） is achieved by using SVM to analyze the spectroscopic peak area data which are processed by PCA.It can not only reduce the noise and dimensionality which contributes to improving the efficiency of the program,but also solve the problem of linear inseparability by combining PCA and SVM.By this method,the ability of LIBS to classify rock is validated.

Relationship of public preferences and behavior in residential outdoor spaces using analytic hierarchy process and principal component analysis—a case study of Hangzhou City, China

This study examined public attitudes concerning the value of outdoor spaces which people use daily. Two successive analyses were performed based on data from common residents and college students in the city of Hangzhou, China. First, citizens registered various items constituting desirable values of residential outdoor spaces through a preliminary questionnaire. The result proposed three general attributes (functional, aesthetic and ecological) and ten specific qualities of residential outdoor spaces. An analytic hierarchy process (AHP) was applied to an interview survey in order to clarify the weights among these attributes and qualities. Second, principal factors were extracted from the ten specific qualities with principal component analysis (PCA) for both the common case and the campus case. In addition, the variations of respondents’ groups were classified with cluster analysis (CA) using the results of the PCA. The results of the AHP application found that the public prefers the functional attribute, rather than the aesthetic attribute. The latter is always viewed as the core value of open spaces in the eyes of architects and designers. Fur-thermore, comparisons of ten specific qualities showed that the public prefers the open spaces that can be utilized conveniently and easily for group activities, because such spaces keep an active lifestyle of neighborhood communication, which is also seen to protect human-regarding residential environments. Moreover, different groups of respondents diverge largely in terms of gender, age, behavior and preference.

A novel method for chemistry tabulation of strained premixed/stratified flames based on principal component analysis

The principal component analysis （PCA） is used to analyze the high dimen- sional chemistry data of laminar premixed/stratified flames under strain effects. The first few principal components （PCs） with larger contribution ratios axe chosen as the tabu- lated scalars to build the look-up chemistry table. Prior tests show that strained premixed flame structure can be well reconstructed. To highlight the physical meanings of the tabu- lated scalars in stratified flames, a modified PCA method is developed, where the mixture fraction is used to replace one of the PCs with the highest correlation coefficient. The other two tabulated scalars are then modified with the Schmidt orthogonalization. The modified tabulated scalars not only have clear physical meanings, but also contain passive scalars. The PCA method has good commonality, and can be extended for building the thermo-chemistry table including strain rate effects when different fuels are used.

Watermarking Based on Principal Component Analysis

A new watermarking scheme using principal component analysis (PCA) is described.The proposed method inserts highly robust watermarks into still images without degrading their visual quality. Experimental results are presented, showing that the PCA based watermarks can resist malicious attacks including lowpass filtering, re scaling, and compression coding.

基于PCA-GWO-GRU的锂离子电池剩余使用寿命预测

为了提高GRU神经网络模型预测锂离子电池剩余使用寿命时的准确性,提出基于PCA-GWO优化的GRU模型,并应用于锂离子电池剩余寿命预测。结果表明,与传统GRU模型相比,经PCA-GWO算法优化的GRU模型具有更高的预测精度。预测起始点为原始数据90%时,预测精度达到最大,对应的均方根误差RMSE为0.0049、平均绝对误差MAE为0.0036、决定系数R^(2)为0.9863。

基于PCA和EEMD的柔性直流配电网故障选线算法

柔性直流故障选线技术的发展对直流配电网有着至关重要的作用。本文针对现有柔性直流故障存在的可利用的故障信息较少等问题,提出了一种新算法,该算法有效利用了集合经验模态分解EEMD(ensemble empirical mode decomposition)算法、主成分分析PCA(principal component analysis)和相关系数各自的优势。首先,提取暂态电流样本信号,采用EEMD得到以正交基函数表示的数据矩阵;接着,基于PCA进行该矩阵元素特征向量到主成分的转换,将样本信号投影到主元空间实现坐标变换,从而得到对样本数据的聚类和识别结果;最后,基于相关系数进行故障线路判别。本文算法的EEMD揭露了原始历史数据的内在变化规律,PCA能够有效选择故障有效特征。大量实验表明,该新算法准确有效,与现有其他方法相比,在故障信息不明显、不同过渡电阻方面具有优势。

Characterization of three-dimensional channel reservoirs using ensemble Kalman filter assisted by principal component analysis

Ensemble-based analyses are useful to compare equiprobable scenarios of the reservoir models.However,they require a large suite of reservoir models to cover high uncertainty in heterogeneous and complex reservoir models.For stable convergence in ensemble Kalman filter(EnKF),increasing ensemble size can be one of the solutions,but it causes high computational cost in large-scale reservoir systems.In this paper,we propose a preprocessing of good initial model selection to reduce the ensemble size,and then,EnKF is utilized to predict production performances stochastically.In the model selection scheme,representative models are chosen by using principal component analysis(PCA)and clustering analysis.The dimension of initial models is reduced using PCA,and the reduced models are grouped by clustering.Then,we choose and simulate representative models from the cluster groups to compare errors of production predictions with historical observation data.One representative model with the minimum error is considered as the best model,and we use the ensemble members near the best model in the cluster plane for applying EnKF.We demonstrate the proposed scheme for two 3D models that EnKF provides reliable assimilation results with much reduced computation time.