We present a method to improve the execution time used to build the roadmap in probabilistic roadmap planners. Our method intelligently deactivates some of the configurations during the learning phase and allows the p...We present a method to improve the execution time used to build the roadmap in probabilistic roadmap planners. Our method intelligently deactivates some of the configurations during the learning phase and allows the planner to concentrate on those configurations that axe most likely going to be useful when building the roadmap. The method can be used with many of the existing sampling algorithms. We ran tests with four simulated robot problems typical in robotics literature. The sampling methods applied were purely random, using Halton numbers, Gaussian distribution, and bridge test technique. In our tests, the deactivation method clearly improved the execution times. Compared with pure random selections, the deactivation method also significantly decreased the size of the roadmap, which is a useful property to simplify roadmap planning tasks.展开更多
Current studies on cable harness layouts have mainly focused on cable harness route planning.However,the topological structure of a cable harness is also extremely complex,and the branch structure of the cable harness...Current studies on cable harness layouts have mainly focused on cable harness route planning.However,the topological structure of a cable harness is also extremely complex,and the branch structure of the cable harness can affect the route of the cable harness layout.The topological structure design of the cable harness is a key to such a layout.In this paper,a novel multi-branch cable harness layout design method is presented,which unites the probabilistic roadmap method(PRM)and the genetic algorithm.First,the engineering constraints of the cable harness layout are presented.An obstacle-based PRM used to construct non-interference and near to the surface roadmap is then described.In addition,a new genetic algorithm is proposed,and the algorithm structure of which is redesigned.In addition,the operation probability formula related to fitness is proposed to promote the efficiency of the branch structure design of the cable harness.A prototype system of a cable harness layout design was developed based on the method described in this study,and the method is applied to two scenarios to verify that a quality cable harness layout can be efficiently obtained using the proposed method.In summary,the cable harness layout design method described in this study can be used to quickly design a reasonable topological structure of a cable harness and to search for the corresponding routes of such a harness.展开更多
This article describes a biologically inspired node generator for the path planning of serially connected hyper-redundant manipulators using probabilistic roadmap planners. The generator searches the configuration spa...This article describes a biologically inspired node generator for the path planning of serially connected hyper-redundant manipulators using probabilistic roadmap planners. The generator searches the configuration space surrounding existing nodes in the roadmap and uses a combination of random and deterministic search methods that emulate the behaviour of octopus limbs. The strategy consists of randomly mutating the states of the links near the end-effector, and mutating the states of the links near the base of the robot toward the states of the goal configuration. When combined with the small tree probabilistic roadmap planner, the method was successfully used to solve the narrow passage motion planning problem of a 17 degree-of-freedom manipulator.展开更多
This paper presents a 3D path planning algorithm for an unmanned aerial vehicle （UAV） in complex environments. In this algorithm, the environments are divided into voxels by octree algorithm. In order to satisfy the...This paper presents a 3D path planning algorithm for an unmanned aerial vehicle （UAV） in complex environments. In this algorithm, the environments are divided into voxels by octree algorithm. In order to satisfy the safety requirement of the UAV, free space is represented by free voxels, which have enough space margin for the UAV to pass through. A bounding box array is created in the whole 3D space to evaluate the free voxel connectivity. The probabilistic roadmap method （PRM） is improved by random sampling in the bounding box array to ensure a more efficient distribution of roadmap nodes in 3D space. According to the connectivity evaluation, the roadmap is used to plan a feasible path by using A＊ algorithm. Experimental results indicate that the proposed algorithm is valid in complex 3D environments.展开更多
In this paper, an adaptive sampling strategy is presented for the generalized sampling-based motion plan- ner, generalized probabilistic roadmap （GPRM）. These planners are designed to account for stochastic map and ...In this paper, an adaptive sampling strategy is presented for the generalized sampling-based motion plan- ner, generalized probabilistic roadmap （GPRM）. These planners are designed to account for stochastic map and model uncertainty and provide a feedback solution to the motion planning problem. Intelligently sampling in this framework can result in large speedups when compared to naive uniform sampling. By using the information of transition probabilities, encoded in these generalized planners, the proposed strategy biases sampling to improve the efficiency of sampling, and increase the overall success probability of GPRM. The strategy is used to solve the motion planning problem of a fully actuated point robot and a 3-DOF fixed-base manipulator on several maps of varying difficulty levels, and results show that the strategy helps solve the problem efficiently, while simultaneously increasing the success probability of the solution. Results also indicate that these rewards increase with an increase in map complexity.展开更多
文摘We present a method to improve the execution time used to build the roadmap in probabilistic roadmap planners. Our method intelligently deactivates some of the configurations during the learning phase and allows the planner to concentrate on those configurations that axe most likely going to be useful when building the roadmap. The method can be used with many of the existing sampling algorithms. We ran tests with four simulated robot problems typical in robotics literature. The sampling methods applied were purely random, using Halton numbers, Gaussian distribution, and bridge test technique. In our tests, the deactivation method clearly improved the execution times. Compared with pure random selections, the deactivation method also significantly decreased the size of the roadmap, which is a useful property to simplify roadmap planning tasks.
基金Supported by National Natural Science Foundation of China(Grant No.51675050).
文摘Current studies on cable harness layouts have mainly focused on cable harness route planning.However,the topological structure of a cable harness is also extremely complex,and the branch structure of the cable harness can affect the route of the cable harness layout.The topological structure design of the cable harness is a key to such a layout.In this paper,a novel multi-branch cable harness layout design method is presented,which unites the probabilistic roadmap method(PRM)and the genetic algorithm.First,the engineering constraints of the cable harness layout are presented.An obstacle-based PRM used to construct non-interference and near to the surface roadmap is then described.In addition,a new genetic algorithm is proposed,and the algorithm structure of which is redesigned.In addition,the operation probability formula related to fitness is proposed to promote the efficiency of the branch structure design of the cable harness.A prototype system of a cable harness layout design was developed based on the method described in this study,and the method is applied to two scenarios to verify that a quality cable harness layout can be efficiently obtained using the proposed method.In summary,the cable harness layout design method described in this study can be used to quickly design a reasonable topological structure of a cable harness and to search for the corresponding routes of such a harness.
文摘This article describes a biologically inspired node generator for the path planning of serially connected hyper-redundant manipulators using probabilistic roadmap planners. The generator searches the configuration space surrounding existing nodes in the roadmap and uses a combination of random and deterministic search methods that emulate the behaviour of octopus limbs. The strategy consists of randomly mutating the states of the links near the end-effector, and mutating the states of the links near the base of the robot toward the states of the goal configuration. When combined with the small tree probabilistic roadmap planner, the method was successfully used to solve the narrow passage motion planning problem of a 17 degree-of-freedom manipulator.
基金supported by National Natural Science Foundation of China(No.61305128)Fundamental Research Funds for the Central Universities,and U.S.Army Research Ofce(No.W911NF-091-0565)
文摘This paper presents a 3D path planning algorithm for an unmanned aerial vehicle （UAV） in complex environments. In this algorithm, the environments are divided into voxels by octree algorithm. In order to satisfy the safety requirement of the UAV, free space is represented by free voxels, which have enough space margin for the UAV to pass through. A bounding box array is created in the whole 3D space to evaluate the free voxel connectivity. The probabilistic roadmap method （PRM） is improved by random sampling in the bounding box array to ensure a more efficient distribution of roadmap nodes in 3D space. According to the connectivity evaluation, the roadmap is used to plan a feasible path by using A＊ algorithm. Experimental results indicate that the proposed algorithm is valid in complex 3D environments.
基金supported by the Air Force Office of Scientific Research, U.S.A. (AFOSR)
文摘In this paper, an adaptive sampling strategy is presented for the generalized sampling-based motion plan- ner, generalized probabilistic roadmap （GPRM）. These planners are designed to account for stochastic map and model uncertainty and provide a feedback solution to the motion planning problem. Intelligently sampling in this framework can result in large speedups when compared to naive uniform sampling. By using the information of transition probabilities, encoded in these generalized planners, the proposed strategy biases sampling to improve the efficiency of sampling, and increase the overall success probability of GPRM. The strategy is used to solve the motion planning problem of a fully actuated point robot and a 3-DOF fixed-base manipulator on several maps of varying difficulty levels, and results show that the strategy helps solve the problem efficiently, while simultaneously increasing the success probability of the solution. Results also indicate that these rewards increase with an increase in map complexity.
