In view of the lack of research on the information model of tufting carpet machine in China,an information modeling method based on Object Linking and Embedding for Process Control Unified Architecture(OPC UA)framewor...In view of the lack of research on the information model of tufting carpet machine in China,an information modeling method based on Object Linking and Embedding for Process Control Unified Architecture(OPC UA)framework was proposed to solve the problem of“information island”caused by the differentiated data interface between heterogeneous equipment and system in tufting carpet machine workshop.This paper established an information model of tufting carpet machine based on analyzing the system architecture,workshop equipment composition and information flow of the workshop,combined with the OPC UA information modeling specification.Subsequently,the OPC UA protocol is used to instantiate and map the information model,and the OPC UA server is developed.Finally,the practicability of tufting carpet machine information model under the OPC UA framework and the feasibility of realizing the information interconnection of heterogeneous devices in the tufting carpet machine digital workshop are verified.On this basis,the cloud and remote access to the underlying device data are realized.The application of this information model and information integration scheme in actual production explores and practices the application of OPC UA technology in the digital workshop of tufting carpet machine.展开更多
Process planning and scheduling are two major plann in g and control activities that consume significant part of the lead-time, theref ore all attempts are being made to reduce lead-time by automating them. Compute r ...Process planning and scheduling are two major plann in g and control activities that consume significant part of the lead-time, theref ore all attempts are being made to reduce lead-time by automating them. Compute r Aided Process Planning (CAPP) is a step in this direction. Most of the existin g CAPP systems do not consider scheduling while generating a process plan. Sched uling is done separately after the process plan has been generated and therefore , it is possible that a process plan so generated is either not optimal or feasi ble from scheduling point of view. As process plans are generated without consid eration of job shop status, many problems arise within the manufacturing environ ment. Investigations have shown that 20%~30% of all process plans generated are not valid and have to be altered or suffer production delays when production sta rts. There is thus a major need for integration of scheduling with computer aide d process planning for generating more realistic process plans. In doing so, eff iciency of the manufacturing system as a whole is expected to improve. Decision support system performs many functions such as selection of machine too ls, cutting tools, sequencing of operations, determination of optimum cutting pa rameters and checking availability of machine tool before allocating any operati on to a machine tool. The process of transforming component data, process capabi lity and decision rules into computer readable format is still a major obstacle. This paper proposes architecture of a system, which integrates computer aided p rocess-planning system with scheduling using decision support system. A decisio n support system can be defined as " an interactive system that provides the use rs with easy access to decision models in order to support semi-structured or u nstructured decision making tasks".展开更多
A series of researches on process planning system architecture is described.The definition of process planning in CIMS, a unified description for work procedure of various CAPP systems,including retneval,variant and g...A series of researches on process planning system architecture is described.The definition of process planning in CIMS, a unified description for work procedure of various CAPP systems,including retneval,variant and generative systems,and the information models about part, manufacturing facility are provided to form scientific basis for process planning automation where a Part Model based on Feature and a Production Environment Model based on Work-Element are to be important supports for implementation of the integrated process planning system.These concepts are applied to the development of a prototype system SIP,which is suitable for box-type mechanical parts and consists of three subsystems:CAD,CAPP and NCP.They are linked together by neutral files as interfaces. This is a successfol implementation for engineering integration.展开更多
This paper studies the adaptive beamforming algorithm based on the frequency diverse array(FDA)array where the interference is located at the same angle(but different range)with the target.We take the cross subarray-b...This paper studies the adaptive beamforming algorithm based on the frequency diverse array(FDA)array where the interference is located at the same angle(but different range)with the target.We take the cross subarray-based FDA with sinusoidal frequency offset(CSB sin-FDA)as the receiving array instead of the basic FDA.The sampling covariance matrix under insufficient snapshot can be corrected by the automatic diagonal loading method.On the basis of decomposing the mismatched steering vector error into a vertical component and a parallel one,this paper searches the vertical component of the error by the quadratic constraint method.The numerical simulation verifies that the beamformer based on the CSB sin-FDA can effectively hold the mainlobe at the target position when the snapshot is insufficient or the steering vector is mismatched.展开更多
文摘In view of the lack of research on the information model of tufting carpet machine in China,an information modeling method based on Object Linking and Embedding for Process Control Unified Architecture(OPC UA)framework was proposed to solve the problem of“information island”caused by the differentiated data interface between heterogeneous equipment and system in tufting carpet machine workshop.This paper established an information model of tufting carpet machine based on analyzing the system architecture,workshop equipment composition and information flow of the workshop,combined with the OPC UA information modeling specification.Subsequently,the OPC UA protocol is used to instantiate and map the information model,and the OPC UA server is developed.Finally,the practicability of tufting carpet machine information model under the OPC UA framework and the feasibility of realizing the information interconnection of heterogeneous devices in the tufting carpet machine digital workshop are verified.On this basis,the cloud and remote access to the underlying device data are realized.The application of this information model and information integration scheme in actual production explores and practices the application of OPC UA technology in the digital workshop of tufting carpet machine.
文摘Process planning and scheduling are two major plann in g and control activities that consume significant part of the lead-time, theref ore all attempts are being made to reduce lead-time by automating them. Compute r Aided Process Planning (CAPP) is a step in this direction. Most of the existin g CAPP systems do not consider scheduling while generating a process plan. Sched uling is done separately after the process plan has been generated and therefore , it is possible that a process plan so generated is either not optimal or feasi ble from scheduling point of view. As process plans are generated without consid eration of job shop status, many problems arise within the manufacturing environ ment. Investigations have shown that 20%~30% of all process plans generated are not valid and have to be altered or suffer production delays when production sta rts. There is thus a major need for integration of scheduling with computer aide d process planning for generating more realistic process plans. In doing so, eff iciency of the manufacturing system as a whole is expected to improve. Decision support system performs many functions such as selection of machine too ls, cutting tools, sequencing of operations, determination of optimum cutting pa rameters and checking availability of machine tool before allocating any operati on to a machine tool. The process of transforming component data, process capabi lity and decision rules into computer readable format is still a major obstacle. This paper proposes architecture of a system, which integrates computer aided p rocess-planning system with scheduling using decision support system. A decisio n support system can be defined as " an interactive system that provides the use rs with easy access to decision models in order to support semi-structured or u nstructured decision making tasks".
文摘A series of researches on process planning system architecture is described.The definition of process planning in CIMS, a unified description for work procedure of various CAPP systems,including retneval,variant and generative systems,and the information models about part, manufacturing facility are provided to form scientific basis for process planning automation where a Part Model based on Feature and a Production Environment Model based on Work-Element are to be important supports for implementation of the integrated process planning system.These concepts are applied to the development of a prototype system SIP,which is suitable for box-type mechanical parts and consists of three subsystems:CAD,CAPP and NCP.They are linked together by neutral files as interfaces. This is a successfol implementation for engineering integration.
基金supported by the National Natural Science Foundation of China(61503408)
文摘This paper studies the adaptive beamforming algorithm based on the frequency diverse array(FDA)array where the interference is located at the same angle(but different range)with the target.We take the cross subarray-based FDA with sinusoidal frequency offset(CSB sin-FDA)as the receiving array instead of the basic FDA.The sampling covariance matrix under insufficient snapshot can be corrected by the automatic diagonal loading method.On the basis of decomposing the mismatched steering vector error into a vertical component and a parallel one,this paper searches the vertical component of the error by the quadratic constraint method.The numerical simulation verifies that the beamformer based on the CSB sin-FDA can effectively hold the mainlobe at the target position when the snapshot is insufficient or the steering vector is mismatched.