期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Early Hydration and Setting Process of Fly Ash-blended Cement Paste under Different Curing Temperatures 被引量:7
1
作者 ZHANG Wenhua WU Fan ZHANG Yunsheng 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2020年第3期551-560,共10页
A specially developed ultrasonic measurement apparatus (UMA) was used to in situ monitor the setting process of fly ash blended cement paste. Combined with the results of Vicat Needle tests, isothermal calorimetric me... A specially developed ultrasonic measurement apparatus (UMA) was used to in situ monitor the setting process of fly ash blended cement paste. Combined with the results of Vicat Needle tests, isothermal calorimetric measurement, XRD analysis, SEM morphology and compressive test, the influence of curing temperature (20, 40, 60, and 90 ℃) and fly ash content (0,10%, 20% and 30%) on the setting and hydration process of fly ash blended cement paste was analyzed. The results show that setting and hardening process of fly ash blended cement paste at elevated temperature can be clearly identified into three stages including dormant stage, acceleration stage and deceleration stage. The increasing of curing temperature greatly accelerates the setting and hardening process. However, the content of fly ash does not have significant effect on the setting in condition of 90 ℃. Besides, the initial and final setting time of cement paste is correspondent with the time of duration of dormant stage and the time of UPV value is 1500 m/s (T1500), respectively. Thus, the UMA can be used to determine the initial and final setting time of cementitious material under different curing temperatures. The compressive test results indicate that the paste with 20% fly ash presents higher compressive strength than the plain paste at curing temperatures of 90 ℃. Therefore, appropriate amount of fly ash is beneficial for concrete in the high temperature curing conditions. 展开更多
关键词 ULTRASONIC setting and hardening process curing temperature fly ash MICROSTRUCTURE
下载PDF
Online Scheduling with Unit Processing Times and Processing Set Restrictions 被引量:1
2
作者 Yong Chen Guang-Ting Chen +3 位作者 Long-Cheng Liu Yi-Wei Jiang Zhi-Yi Tan An Zhang 《Journal of the Operations Research Society of China》 EI CSCD 2019年第3期475-484,共10页
This paper investigates online scheduling problems with processing set restrictions.There is a sequence of jobs that are revealed one by one over list,where each job has unit processing time.A job can only be processe... This paper investigates online scheduling problems with processing set restrictions.There is a sequence of jobs that are revealed one by one over list,where each job has unit processing time.A job can only be processed by a subset of the machines,namely the processing set of the job.The objective is to minimize the makespan.For m machines with two different processing sets,we propose an optimal algorithm with a competitive ratio of 3/2.For three machines with inclusive processing sets,an optimal algorithm with competitive ratio 5/3 is provided. 展开更多
关键词 Online scheduling Competitive ratio processing sets
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部