A Modeling Study of Land Surface Process Impacts on Inland Behavior of Typhoon Rananim(2004)

On 12 August 2004, Typhoon Rananim （0414） moved inland over China and stagnated over the Poyang Lake area, resulting in torrential rainfall and severe geologic hazards. The Advanced Weather Research and Forecasting （ARW-WRF） model and its different land surface models （LSMs） were employed to study the impacts of land surface process on the inland behavior of Typhoon Rananim. Results show that simulations, coupled with LSMs or not, have no significant differences in predicting typhoon track, intensity, and largescale circulation. However, the simulations of mesoscale structure, rainfall rate, and rainfall distribution of typhoon are more reasonable with LSMs than without LSMs. Although differences are slight among LSMs, NOAH is better than the others. Based on outputs using the NOAH scheme, the interaction between land surtace and typhoon was explored in this study. Notably, typhoon rainfall and cloud cover can cool land surface, but rainfall expands the underlying saturated wetland area, which exacerbates the asymmetric distribution of surface heat fluxes. Accordingly, an energy frontal zone may form in the lower troposphere that enhances ascending motion and local convection, resulting in heavier rainfall. Moreover, the expanded underlying saturated wetlands provide plentiful moisture and unstable energy for the maintenance of Typhoon Rananim and increased rainfall in return.

Using a Modified Soil-Plant-Atmosphere Scheme(MSPAS)to Simulate the Interaction between Land Surface Processes and Atmospheric Boundary Layer in Semi-Arid Regions

This paper uses a Modified Soil-Plant-Atmosphere Scheme (MSPAS) to study the interaction between land surface and atmospheric boundary layer processes. The scheme is composed of two main parts: atmospheric boundary layer processes and land surface processes. Compared with SiB and BATS, which are famous for their detailed parameterizations of physical variables, this simplified model is more convenient and saves much more computation time. Though simple, the feasibility of the model is well proved in this paper. The numerical simulation results from MSPAS show good agreement with reality. The scheme is used to obtain reasonable simulations for diurnal variations of heat balance, potential temperature of boundary layer, and wind field, and spatial distributions of temperature, specific humidity, vertical velocity, turbulence kinetic energy, and turbulence exchange coefficient over desert and oasis. In addition, MSPAS is used to simulate the interaction between desert and oasis at night, and again it obtains reasonable results. This indicates that MSPAS can be used to study the interaction between land surface processes and the atmospheric boundary layer over various underlying surfaces and can be extended for regional climate and numerical weather prediction study.

Understanding the Interactions between Climate Change,Landscape Evolution,Surface Processes and Tectonics in the Earth System:What Can the Studies of Chinese Deserts Contribute?

Due to large deserts on Earth surface a thorough understanding of climate change, landscape evolution and geomorphological processes having occurred in deserts is crucial for Earth System Science. The landscapes in deserts are, however, diverse and different over the globe with regard to their geomorphological nature, human activities and geological histories. In the last decades a great number of efforts have been put to the investigation of the initial timing of the occurrence of arid climate, e. g. in northwestern China. Silty sediments in the downwind directions have been used to deduce the histories of deserts. In general, there is a lack of knowledge about processes and landscapes in Chinese drylands between the initial Miocene silt sedimentation at desert margins and the late Quaternary multiple occurrences of wetter climate with assumed large lakes in many of the deserts in northern China. The geomorphological concept of three primary triggering factors, i.e., the sediment supply, sediment availability and transport capacity of wind, and additionally the underground geology need to be fully considered for a better understanding of the environmental histories of sand seas which should not be viewed as equivalent for deserts because sand seas cover between 〈 1% and ca. 45% of the desert areas in various continents dependent on a complex interaction between various processes of both exogenous and endogenous origins.

Surface runoff processes and sustainable utilization of water resources in Manas River Basin, Xinjiang, China

Water is the important resource to guarantee the existence and development of oases in arid areas. To improve the utilization efficiency of water resources in Manas River Basin, this paper investigated the trends and periods of runoff based on the runoff and climate data for the past 50 years. Subsequently, with the socioeconomic and water resources data, we studied a comprehensive evaluation on the water security in this area. The results indicated that the stream flows in the three hydrological stations of Hongshanzui, Kensiwat and Bajiahu have sig- nificantly increased and undergone abrupt changes, with periods of 18 and 20 years. According to assessment, water security in the Manas River Basin was at an unsafe level in 2008. In criterion layer, the ecological security index and the index of supply-demand situation are both at the relatively secure level; the quantity index and so- cioeconomic index of water resources are at the unsafe level and basic security level, respectively. Therefore, in order to achieve sustainable economic and social development within the Manas River Basin, it is vital to take a series of effective measures to improve the status of water security.

Influence of Ultrasonic Surface Rolling Process and Shot Peening on Fretting Fatigue Performance of Ti-6Al-4V

At present,there are many studies on the residual stress field and plastic strain field introduced by surface strengthening,which can well hinder the initiation of early fatigue cracks and delay the propagation of fatigue cracks.However,there are few studies on the effects of these key factors on fretting wear.In the paper,shot-peening(SP)and ultrasonic surface rolling process(USRP)were performed on Ti-6Al-4V plate specimens.The surface hardness and residual stresses of the material were tested by vickers indenter and X-ray diffraction residual stress analyzer.Microhardness were measured by HXD-1000MC/CD micro Vickers hardness tester.The effects of different surface strengthening on its fretting fatigue properties were verified by fretting fatigue experiments.The fretting fatigue fracture surface and wear morphology of the specimens were studied and analyzed by means of microscopic observation,and the mechanism of improving fretting fatigue life by surface strengthening process was further explained.After USRP treatment,the surface roughness of Ti-6Al-4V is significantly improved.In addition,the microhardness of the specimen after SP reaches the maximum at 80μm from the surface,which is about 123%higher than that of the AsR specimen.After USRP,it reaches the maximum at 150μm from the surface,which is about 128%higher than that of AsR specimen.It is also found that the residual compressive stress of the specimens treated by USRP and SP increases first and then decreases with the depth direction,and the residual stress reaches the maximum on the sub surface.The USRP specimen reaches the maximum value at 0.18 mm,about−550 MPa,while the SP specimen reaches the maximum value at 0.1 mm,about−380 MPa.The fretting fatigue life of Ti-6Al-4V effectively improved after USRP and SP.The surface integrity of specimens after USRP is the best,which has deeper residual compressive stress layer and more refined grain.In this paper,a fretting wear device is designed to carry out fretting fatigue experiments on specimens with different surface strengthening.

The Effects of Land Surface Process Perturbations in a Global Ensemble Forecast System

Atmospheric variability is driven not only by internal dynamics, but also by external forcing, such as soil states, SST, snow, sea-ice cover, and so on. To investigate the forecast uncertainties and effects of land surface processes on numerical weather prediction, we added modules to perturb soil moisture and soil temperature into NCEP＇s Global Ensemble Forecast System （GEFS）, and compared the results of a set of experiments involving different configurations of land surface and atmospheric perturbation. It was found that uncertainties in different soil layers varied due to the multiple timescales of interactions between land surface and atmospheric processes. Perturbations of the soil moisture and soil temperature at the land surface changed sensible and latent heat flux obviously, as compared to the less or indirect land surface perturbation experiment from the day-to-day forecasts. Soil state perturbations led to greater variation in surface heat fluxes that transferred to the upper troposphere, thus reflecting interactions and the response to atmospheric external forcing. Various verification scores were calculated in this study. The results indicated that taking the uncertainties of land surface processes into account in GEFS could contribute a slight improvement in forecast skill in terms of resolution and reliability, a noticeable reduction in forecast error, as well as an increase in ensemble spread in an under-dispersive system. This paper provides a preliminary evaluation of the effects of land surface processes on predictability. Further research using more complex and suitable methods is needed to fully explore our understanding in this area.

A Modeling Study of Surface Rainfall Processes Associated with a Torrential Rainfall Event over Hubei,China,during July 2007

The surface rainfall processes associated with the torrential rainfall event over Hubei,China,during July 2007 were investigated using a two-dimensional cloud-resolving model.The model integrated the large-scale vertical velocity and zonal wind data from National Centers for Environmental Prediction（NCEP）/Global Data Assimilation System（GDAS） for 5 days.The time and model domain mean surface rain rate was used to identify the onset,mature,and decay periods of rainfall.During the onset period,the descending motion data imposed in the lower troposphere led to a large contribution of stratiform rainfall to the model domain mean surface rainfall.The local atmospheric drying and transport of rain from convective regions mainly contributes to the stratiform rainfall.During the mature periods,the ascending motion data integrated into the model was so strong that water vapor convergence was the dominant process for both convective and stratiform rainfall.Both convective and stratiform rainfalls made important contributions to the model domain mean surface rainfall.During the decay period,descending motion data input into the model prevailed,making stratiform rainfall dominant.Stratiform rainfall was mainly caused by the water vapor convergence over raining stratiform regions.

Simulation Experiments of Land Surface Physical Processes and Ecological Effect over Different Underlying Surface

Based on the existing Land Surface Physical Process Models(Deardorff, Dickinson, LIU, Noilhan, Seller, ZHAO), a Comprehensive Land Surface Physical Process Model (CLSPPM) is developed by considering the different physical processes of the earth's surface-vegetation-atmosphere system more completely. Compared with SiB and BATS, which are famous for their detailed parameterizations of physical variables, this simplified model is more convenient and saves much more computation time. Though simple, the feas...

PROTOTYPE SURFACE MICRO- PRECISION IN FUSED DEPOSITION MODELING PROCESS

To aim at prototype parts fabricated with fused deposition modeling （FDM） process, the problems how to improve and enhance their surface micro-precision are studied. The producing mechanism of surface roughness is explained with three aspects concretely including the principle error of rapid prototyping （RP） process, the inherent characteristics of FDM process, and some mi- cro-scratches on the surface of the extruded fiber. Based on the micro-characters of section shape of the FDM prototype, a physical model reflecting the outer shape characters is abstracted. With the physical simplified and deduced, the evaluating equations of surface roughness are acquired. According to the FDM sample parts with special design for experimental measurement, the real surface roughness values of different inclined planes are obtained. And the measuring values of surface roughness are compared with the calculation values. Furthermore, the causes of surface roughness deviation between measuring values and calculation values are respectively analyzed and studied. With the references of analytic conclusions, the measuring values of the experimental part surface are revised, and the revised values nearly accord with the calculation values. Based on the influencing principles of FDM process parameters and special post processing of FDM prototype parts, some concrete measures are proposed to reduce the surface roughness of FDM parts, and the applying effects are better.

Nanocrystallization of Cementite in 0.4C-1Cr Steel During High-Power Surface Processing

The microstructures of the nanocrystalline surface layer of a quenched and high temperature tempered 0. 4C- 1Cr steel induced by high-power surface processing （HPSP） technique were characterized by scan- ning eleetron microscopy and transmission electron microscopy. The results indicate that a nanocrystalline layer was fabricated on the surface of the steel 19 using HPSP treatment. The mean grain size in the surface layer is about 11 nm. The nanocrystallization of cementite is prior to that of the matrix phase, ferrite.

ACQUIREMENT AND COMPUTER PROCESSING OF 3-D SURFACE SHAPE DATA

The laser scanning and CCD image-transmitting measurement method and principle on acquiring 3-D curved surface shape data are discussed. Computer processing technique of 3-D curved surface shape(be called“ 3 - D surface shape”for short) data is analysed. This technique in- cludes these concrete methods and principles such as data smoothing, fitting, reconstructing ,elimi- nating and so on. The example and result about computer processing of 3- D surface shape data are given .

Effect of Wet Surface Treated Nano-SiO_2 on Mechanical Properties of Polypropylene Composite

Nano-SiO2/polypropylene composite was prepared by melt-blending process. The nano-SiO2 particles were organized by wet process surface treatment with silane coupling agent KH-570. The effect of mass fraction of nano-SiO2 particles and dosage of KH-570 on the toughening and strengthening of PP matrix were investigated based on the fractography of impact notch and the analysis of crystal structure by X-ray and dispersive structure of nano-SiO2 by TEM. Results show that the impact and flexural strength and modulus of the composite are improved obviously with low loading of nano-SiO2 （3 wt%-5 wt%）, and the izod impact strength of PP increases twice with 4 wt% nano-SiO2. The nano-SiO2 particles treated can disperse into the matrix resin, which has evident heterogeneous nucleation effects on the crystallization of PP. The optimal toughening and strengthening effects of PP matrix can be obtained when the content of nano-SiO2 and KH-570 are 4 wt% and 3 wt%, respectively.

A Multi-Scale Study on Silicon-Oxide Etching Processes in C_4F_8/Ar Plasmas

A multi-scale numerical method coupled with the reactor,sheath and trench model is constructed to simulate dry etching of SiO_2 in inductively coupled C_4F_8 plasmas.Firstly,ion and neutral particle densities in the reactor are decided using the CFD-ACE＋ commercial software.Then,the ion energy and angular distributions（IEDs and IADs） are obtained in the sheath model with the sheath boundary conditions provided with CFD-ACE＋.Finally,the trench profile evolution is simulated in the trench model.What we principally focus on is the effects of the discharge parameters on the etching results.It is found that the discharge parameters,including discharge pressure,radio-frequency（rf） power,gas mixture ratios,bias voltage and frequency,have synergistic effects on IEDs and IADs on the etched material surface,thus further affecting the trench profiles evolution.

The Sensitivity of Ground Surface Temperature Prediction to Soil Thermal Properties Using the Simple Biosphere Model(SiB2)

Using the Simple Biosphere Model （SiB2）, soil thermal properties （STP） were examined in a Tibetan prairie during the monsoon period to investigate ground surface temperature prediction. We improved the SiB2 model by incorporating a revised force-restore method （FRM） to take the vertical heterogeneity of soil thermal diffusivity （k） into account. The results indicate that （1） the revised FRM alleviates daytime overestimation and nighttime underestimation in modeled ground surface temperature （Tg）, and （2） its role in little rainfall events is significant because the vertical gradient of k increases with increasing surface evaporation. Since the original formula of thermal conductivity （A） in the SiB2 greatly underestimates soil thermal conductivity, we compared five Mgorithms of A involving soil moisture to investigate the cause of overestimation during the day and underestimation at night on the basis of the revised FRM. The results show that （1） the five algorithms significantly improve Tg prediction, especially in daytime, and （2） taking one of these five algorithms as an example, the simulated Tg values in the daytime are closer to the field measurements than those in the nighttime. The differences between modeled Tg and field measurements are mostly within the margin of error of -4-2 K during 3 August to 4 September 1998.

Developing Mg–Zn surface alloy by friction surface allosying: In vitro degradation studies in simulated body fluids

A new variant of friction-assisted process named friction surface alloying(FSA)for developing surface alloys was demonstrated in the present work.In FSA,the dispersed phase is melted and allowed to react with the matrix material to form an alloy at the surface of a metallic substrate.In the present work,magnesium(Mg)sheets and zinc(Zn)powder were selected,and fine grained(~3.5μm)Mg–Zn surface alloy with improved hardness was produced by FSA.X-ray diffraction studies confirmed the formation of intermetallic phases of Mg and Zn at the surface.From the in vitro degradation studies carried out by immersing in simulated body fluids,a lower corrosion rate was observed for the Mg–Zn surface alloy compared with pure Mg.The surface morphologies after immersion studies indicated large degraded areas on the base Mg compared with Mg–Zn.The results demonstrate the potential of FSA in developing Mg-based surface alloys without melting the substrate to impart better surface properties.

A new acid pickling process for copper alloys

The cleaning process of removing oxides on the surface of copper alloy sheetswas investigated systematically. Through optimizing, a perfect process was selected that is fit forremoving oxides on the surface. By acid pickling, all kinds of copper oxides are removedcompletely, furthermore, no poisonous gases are given out and a smooth and clean surface of copperalloys is obtained. At present, the process is applied successfully in the copper-processingindustry.

The Characteristics and Controlling Factors of Water and Heat Exchanges over the Alpine Wetland in the East of the Qinghai–Tibet Plateau

Alpine wetland is one of the typical underlying surfaces on the Qinghai–Tibet Plateau.It plays a crucial role in runoff regulation.Investigations on the mechanisms of water and heat exchanges are necessary to understand the land surface processes over the alpine wetland.This study explores the characteristics of hydro-meteorological factors with in situ observations and uses the Community Land Model 5 to identify the main factors controlling water and heat exchanges.Latent heat flux and thermal roughness length were found to be greater in the warm season(June–August)than in the cold season(December–February),with a frozen depth of 20–40 cm over the alpine wetland.The transfers of heat fluxes were mainly controlled by longwave radiation and air temperature and affected by root distribution.Air pressure and stomatal conductance were also important to latent heat flux,and soil solid water content was important to sensible heat flux.Soil temperature was dominated by longwave radiation and air temperature,with crucial surface parameters of initial soil liquid water content and total water content.The atmospheric control factors transitioned to precipitation and air temperature for soil moisture,especially at the shallow layer(5 cm).Meanwhile,the more influential surface parameters were root distribution and stomatal conductance in the warm season and initial soil liquid water content and total water content in the cold season.This work contributes to the research on the land surface processes over the alpine wetland and is helpful to wetland protection.

An extraordinary-performance gradient nanostructured Hadfield manganese steel containing multi-phase nanocrystalline-amorphous core-shell surface layer by laser surface processing

Reducing grain size(i.e.increasing the fraction of grain boundaries)could effectively strengthen nanograined metals but inevitably sacrifices the ductility and possibly causes a strengthening-softening transition below a critical grain size.In this work,a facile laser surface remelting-based technique was employed and optimized to fabricate a∼600μm-thick heterogeneous gradient nanostructured layer on an austenitic Hadfield manganese steel,in which the average grain size is gradually decreased from∼200μm in the matrix to only∼8 nm in the nanocrystalline-amorphous core-shell topmost surface.Atomic-scale microstructural characterizations dissected the gradient refinement processes along the gradient direction,i.e.transiting from the dislocations activities and twinning in sub-region to three kinds of martensitic transformations,and finally a multi-phase nanocrystalline-amorphous core-shell structural surface.Mechanical tests(e.g.nanoindentation,bulk-specimen tensile,and micro-pillar compression)were conducted along the gradient direction.It confirms a tensile strength of∼1055 MPa and ductility of∼10.5%in the laser-processed specimen.Particularly,the core-shell structural surface maintains ultra-strong(tensile strength of∼1.6 GPa,micro-pillar compressive strength of∼4 GPa at a strain of∼8%,and nanoindentation hardness of∼7.7 GPa)to overcome the potential strengthening-softening transition.Such significant strengthening effects are ascribed to the strength-ductility synergetic effects-induced extra work hardening ability in gradient nanostructure and the well-maintained dislocation activities inside extremely refined nanograins in the multi-phase nanocrystalline-amorphous core-shell structural surface,which are evidenced by atomic-scale observations and theoretical analysis.This study provides a unique hetero-nanostructure through a facile laser-related technique for extraordinary mechanical performance.

Earth surface processes and their effects on human behavior in monsoonal China during the Pleistocene-Holocene epochs

There is a wide diversity of landforms in China. The topography of three major ter- races, decreasing in height stepwise from west to east, was formed by the early Miocene. With the commencement of the Great Northern Hemisphere Glaciations （GHGs） and the glacial-interglacial cycles in the Pleistocene, thick loess deposits accumulated in north China, and fluvial terraces were formed and lakes expanded and contracted in eastern and central China. The earliest evidence of hominins in China is dated to ~1.7 Ma; they occupied the monsoon-dominated region for a long interval, until the late Pleistocene, ~50 ka. In this study, we investigated a large area rich in the relics and artifacts of early man. The results indicate that the early humans occupied riverine areas, especially medium-sized fluvial basins, and lake shores. Even in the relatively recent geological past, the occupation and abandonment of settlements were directly forced by the shifting of sand dune fields in the desert-loess transi- tional zone, which in turn was closely associated with variations in the monsoon climate and vegetation patterns. Our observations indicate that landforms were one of the main determi- nants of early human behavior, in that loess tableland, large alluvial plains, desert-Gobi areas, and the Tibetan Plateau, were not suitable environments for early human settlement. We infer that the early humans in China adapted their behavior to specific landforms and landform processes. The monsoon climate, which shapes the large-scale step-like pattern of fluvial landforms, promotes vegetation coverage and dominates soil formation, provides a crucial context for early human adaptation. The adaptation of early humans to earth surface proc- esses in East Asia is investigated for the first time in this study. Future investigations will provide further information that will increase our understanding of the linkage between early human behavior and landform processes in East Asia.