Progress of Solidification Researches and the Applications in Materials Processing

The research achievements of solidification theories and technologies in the last decades are reviewed with the stresses on some new development in the recent years. Some new interesting areas emerged in the last years are also pointed out.

The Application of Laser Processing on Clutch Manufacture

The first multi-function laser processing system in the domestic for clutch manufacture,with abilities of cutting, jointing and heat treatment,was reported in this paper.One external optical path,double laser heads,adjust device by manual operation,automatically track were employed in this system Also the other parts of vehicles can be fabricated by this system,as well as clutches.The special processing to manufacture the clutches of heavy vehicles,which was developed by the project of this laser processing system,achieved the international standards and satisfied the economic development and nation defense in the do- mestic.

Effectuate Application of Optimum Methods in Grinding Process

Random error of grinding process is central factor th at give an effect on grinding quality all through. Optimum methods are usually a pplied on grinding process for higher productivity and preferable grinding quali ty. But the grinding quality can’t be reliably controlled now and then while opt imal solution of grinding processing parameters have been applied in production, because of two involved aspects which are availability of established empirical formulas and reliability of setting up optimum mathematical model. That is to s ay, there is particular application of optimum methods in grinding process. This paper discussed that how to confirm conditions of grinding test which be po int to grinding peculiarity when test design and regression analysis are used to setting up some empirical formulas. In order to reduce effect of random errors on precision of the empirical formulas and enable them to be applied widely, a m ethod that a lot of random error can be sufficiently contained in grinding test was suggested. And then, A means to ameliorate restriction formulas of grinding quality is expounded based on marked level of the empirical formulas and improve d reliability of optimum mathematical model is given, which offer an effectual w ay for solving grinding quality out of control as a result of random error and w orkable optimal solution of grinding processing parameters can be applied in the production really. Finally, an example is presented.

NEW INQUIRY INTO THE APPLICATION OF CASE TOOLS TO CIM PROCESS

There is an urgent necessity to introduce the life cycle development method and a Computer-Aided Software Engineering (CASE) environment to support the development of a Computer Integrated Manufacturing (CIM) system. In this paper, we present several ideas while inquiring how to apply CASE tools to CIM process effectively, and propose five proper applicable paradigms to enhance the possibility of applications that the CIM process may make better use of CASE tools.

The Status Quo and Enlightenment of the Foreign Extended Clinical Trial System

Objective To study the extended clinical trial systems in the United States,the European Union and Australia,and to provide a reference for the improvement of China’s extended clinical trial system.Methods Literature research method,risk management analysis method and comparative research were used in this paper to analyze the development history,scope of use,status quo of the extended clinical trial systems in the United States,the European Union,and Australia.Then,the current situation and shortcomings of China’s extended clinical trial system were compare with these foreign countries so as to put forward some suggestions for improvement.Results and Conclusion China should improve existing laws and regulations by establishing a fast application procedure,increasing application channels,and providing an information disclosure platform to meet the needs of patients in extended clinical trials.

ENTERPRISE INTEGRATION PLATFORM BASED ON SERVICEORIENTED ARCHITECTURE

To achieve information integration, process integration and application integration of enterprise, an enterprise integration platform （EIP） based on service-oriented architecture （SOA） is built. The enterprise integration model depending on encapsulating the business processes as well as the enterprise applications by the neutral and standard web services is presented. The problem how to discover the existed enterprise resources and share them was resolved depending on the mechanism of publishing and discovering the services. The EIP is integrated closely with product lifecycle management （PLM） system so that the process integration as well as orchestration of the business process services is implemented by encapsulating the workflow engine of PLM system. Not only process integration and application integration, but also information integration based on the bill of material （BOM） conversion driven by process are achieved. Finally, an interpretive, qualitative case study on EIP is conducted for this research.

Evaluating the Impacts of Security-Durability Characteristic:Data Science Perspective

Since the beginning of web applications,security has been a critical study area.There has been a lot of research done to figure out how to define and identify security goals or issues.However,high-security web apps have been found to be less durable in recent years;thus reducing their business continuity.High security features of a web application are worthless unless they provide effective services to the user and meet the standards of commercial viability.Hence,there is a necessity to link in the gap between durability and security of the web application.Indeed,security mechanisms must be used to enhance durability as well as the security of the web application.Although durability and security are not related directly,some of their factors influence each other indirectly.Characteristics play an important role in reducing the void between durability and security.In this respect,the present study identifies key characteristics of security and durability that affect each other indirectly and directly,including confidentiality,integrity availability,human trust and trustworthiness.The importance of all the attributes in terms of their weight is essential for their influence on the whole security during the development procedure of web application.To estimate the efficacy of present study,authors employed the Hesitant Fuzzy Analytic Hierarchy Process(H-Fuzzy AHP).The outcomes of our investigations and conclusions will be a useful reference for the web application developers in achieving a more secure and durable web application.

Review on theory and applications of wavefront recording plane framework in generation and processing of digital holograms

The wavefront recording plane （WRP）, subsequently generalized to be known as the virtual diffraction plane （VDP）, is a recent concept that has been successfully deployed in fast generation and processing of digital holograms. In brief, the WRP and its extension, the VDP, is a hypothetical plane that is located between the hologram and the object scene, and which is at close proximity to the latter. As such, the fringe patterns on the hypothetical plane are carrying the holistic information of the hologram, as well as the local optical properties of the object scene. This important property enables a hologram to be processed with classical image processing techniques that are normally unsuitable for handling holographic information. In this paper we shall review a number of works, that have been developed based on the framework of the WRP and the VDP.

Instantly Investigating the Adsorption of Polymeric Corrosion Inhibitors on Magnesium Alloys by Surface Analysis under Ambient Conditions

Surface engineering of magnesium alloys requires adequate strategies, processes and materials permitting corrosion protection. Liquid formulations containing corrosion inhibitors often are to be optimized according to the demands of the respective substrate and following the service conditions during its application. As an interdisciplinary approach, a combination of several techniques for instantly monitoring or elaborately analyzing the surface state of magnesium was accomplished in order to characterize the performance of new adsorbing sustainable amphiphilic polymers which recently were developed to facilitate a multi-metal corrosion protection approach. The application of established techniques like Contact Angle measurements and X-ray Photoelectron Spectroscopy investigations was supplemented by introducing related and yet faster online-capable and larger-scale techniques like Aerosol Wetting Test and Optically Stimulated Electron Emission. Moreover, an inexpensive setup was configured for scaling the inset and the extent of degradation processes which occur at local electrochemical circuits and lead to hydrogen bubble formation. Using these analytical tools, changes of the surface state of emeried AM50 samples were investigated. Even in contact with water, being a moderate corrosive medium, the online techniques facilitated detecting surface degradation of the unprotected magnesium alloy within some seconds. In contrast, following contact with a 1 weight% formulation of a polymeric corrosion inhibitor, surface monitoring indicated a delay of the onset of degradation processes by approximately two orders of magnitude in time. Mainly based on the spectroscopic investigations, the corrosion inhibiting effects of the investigated polymer are attributed to the adsorption of a primary polymer layer with a thickness of a few nanometers which occurs within some seconds. Immersion of magnesium for several hours brings up a protective film with around ten nanometers thickness.

An integrated approach for machine-learning-based system identification of dynamical systems under control:application towards the model predictive control of a highly nonlinear reactor system

Advanced model-based control strategies,e.g.,model predictive control,can offer superior control of key process variables for multiple-input multiple-output systems.The quality of the system model is critical to controller performance and should adequately describe the process dynamics across its operating range while remaining amenable to fast optimization.This work articulates an integrated system identification procedure for deriving black-box nonlinear continuous-time multiple-input multiple-output system models for nonlinear model predictive control.To showcase this approach,five candidate models for polynomial and interaction features of both output and manipulated variables were trained on simulated data and integrated into a nonlinear model predictive controller for a highly nonlinear continuous stirred tank reactor system.This procedure successfully identified system models that enabled effective control in both servo and regulator problems across wider operating ranges.These controllers also had reasonable per-iteration times of ca.0.1 s.This demonstration of how such system models could be identified for nonlinear model predictive control without prior knowledge of system dynamics opens further possibilities for direct data-driven methodologies for model-based control which,in the face of process uncertainties or modelling limitations,allow rapid and stable control over wider operating ranges.

ASYMPTOTIC BEHAVIOR OF UNSTABLE ARMA PROCESSES WITH APPLICATION TO LEAST SQUARES ESTIMATES OF THEIR PARAMETERS

A time series x(t), t≥1, is said to be an unstable ARMA process if x(t) satisfies an unstableARMA model such asx(t)=a_1x(t-1)+a_2x(t-2)+…+a_8x(t-s)+w(t)where w(t) is a stationary ARMA process; and the characteristic polynomial A(z)=1-a_1z-a_2z^2-…-a_3z^3 has all roots on the unit circle. Asymptotic behavior of sum form 1 to n (x^2(t)) will be studied by showing somerates of divergence of sum form 1 to n (x^2(t)). This kind of properties Will be used for getting the rates of convergenceof least squares estimates of parameters a_1, a_2,…, a_?

THE H(?)LDER CONTINUITY OF WESTWATER PROCESS AND ITS APPLICATIONS

In this paper, the Holder continuity of Westwater process X_t is concerned. More precisely,we show that there exists a random variable r_C∈(0,∞) for any C∈(3,∞) such that|X_s-X_t|≤C|(s-t)|^(1/2)|log|t-s||<r_C.As its applications. we give two bounds respectively for the Hausdorff measure function of multipletime set of Westwater process, and the Hausdorff measure of the image X(E) of a Borel set Eby Westwater process.

Description of time-varying noise processes with applications to aircraft flying-over noise

On the basis of spectrum moment description of a signal, evolutionary vector is developed to describe slowly time-varying noise processes. It describes the main time-varying properties of a signal. Applications to aircraft flying-over noise are presented.

Application of coupled equation method on resonance processes of atomic lithium

The coupled equation method （CEM） has been applied to investigating the resonance structures for the ground state 1s^22s^ 2S of the neutral lithium from the first threshold up to 64.5 eV. Resonance structures of atomic lithium due to single excitations of the ls and 2s electrons are studied by infinite-order calculations in detail. The effect of spin-orbit splitting is also included for some of the low-lying ls2snp（↑↓） resonance, and the influence of the interference between 1s^2s^3 Snp .↓ and 1s2s^ 1 Snp ↑ states on the resonance structure has been confirmed theoretically. The results show that the presented technique can give the reasonable resonance structures very well in photoionization processes.

Advances in spaceborne hyperspectral remote sensing in China

With the maturation of satellite technology,Hyperspectral Remote Sensing(HRS)platforms have developed from the initial ground-based and airborne platforms into spaceborne platforms,which greatly promotes the civil application of HRS imagery in the fields of agriculture,forestry,and environmental monitoring.China is playing an important role in this evolution,especially in recent years,with the successful launch and operation of a series of civil hyper-spectral spacecraft and satellites,including the Shenzhou-3 spacecraft,the Gaofen-5 satellite,the SPARK satellite,the Zhuhai-1 satellite network for environmental and resources monitoring,the FengYun series of satellites for meteorological observation,and the Chang’E series of spacecraft for planetary exploration.The Chinese spaceborne HRS platforms have various new characteristics,such as the wide swath width,high spatial resolution,wide spectral range,hyperspectral satellite networks,and microsatellites.This paper focuses on the recent progress in Chinese spaceborne HRS,from the aspects of the typical satellite systems,the data processing,and the applications.In addition,the future development trends of HRS in China are also discussed and analyzed.

A HYBRID MODEL OF KNOWLEDGE MANAGEMENT FOR NEW SERVICE DEVELOPMENT

Although many theories regarding the implementation of knowledge management （KM） in organizations have been proposed and studied, most applications tend to stand alone without incorporating the business processes. Different categories of knowledge provide different benefits and how to integrate various categories of KM into a hybrid approach as an effective KM manner remains strategically important, and yet is still understudied. Therefore, in this paper a hybrid model that integrates principal KM applications for new service development （NSD） and the measurement of the resulting f＇mancial benefits have been developed. The proposed KM model incorporates newsgroups, knowledge forums, knowledge asset management and knowledge application processes as a hybrid means for sharing organizational knowledge along two axes, explicit vs. implicit and individual vs. collective. One of the largest management consulting companies in Taiwan, China, whose process model of NSD was standing alone with KM applications, was selected for the case study. A set of hybrid KM processes was developed to implement the proposed KM model, and it illustrates an application with greater financial benefits for integrating hybrid KM practices into the business process. Based on knowledge value added （KVA） validation, the proposed KM model provides a new operating system for sharing NSD knowledge within an organization. Through the case study by measuring the achieved financial results, the proposed KM model is found to provide an exclusive hybrid platform with an empirical process model to address innovative approaches and practical values of KM within an organization.

Hot deformation behavior of an antibacterial Co–29Cr–6Mo–1.8Cu alloy and its effect on mechanical property and corrosion resistance

In order to optimize the deformation processing, the hot deformation behavior of Co-Cr-Mo-Cu （here- after named as Co-Cu） alloy was studied in this paper at a deformation temperature range of 950-1150 ℃ and a strain rate range of 0.008-5 s^-1. Based on the true stress-true strain curves, a constitutive equation in hyperbolic sin function was established and a hot processing map was drawn. It was found that the flow stress of the Co-Cu alloy increased with the increase of the strain rate and decreased with the increase of the deforming temperature. The hot processing map indicated that there were two unstable regions and one well-processing region. The microstructure, the hardness distribution and the electro- chemical properties of the hot deformed sample were investigated in order to reveal the influence of the hot deformation. Microstructure observation indicated that the grain size increased with the increase of the deformation temperature but decreased with the increase of the strain rate. High temperature and low strain rate promoted the crystallization process but increased the grain size, which results in a reduction in the hardness. The hot deformation at high temperature （1100-1150 ℃） would reduce the corrosion resistance slightly. The final optimized deformation process was： a deformation temperature from 1050to 1100 ℃, and a strain rate from 0.008 to 0.2 s^-1, where a completely recrystallized and homogeneously distributed microstructure would be obtained.

Implications of CMS analysis of photon-photon interactions for photon PDFs

As part of a recent analysis of exclusive two-photon production of W＋W- pairs at the LHC, the CMS experiment used di-lepton data to obtain an ＂effective＂ photon-photon luminosity. We show how the CMS analysis on their 8 TeV data, along with some assumptions about the likelihood for events in which the proton breaks up to pass the selection criteria, can be used to significantly constrain the photon parton distribution functions, such as those from the CTEQ, MRST, and NNPDF collaborations. We compare the data with predictions using these photon distributions, as well as the new LUXqed photon distribution. We study the impact of including these data on the NNPDF2.3QED, NNPDF3.0QED and CT14QEDinc fits. We find that these data place a useful and complementary cross-check on the photon distribution, which is consistent with the LUXqed prediction while suggesting that the NNPDF photon error band should be significantly reduced. Additionally, we propose a simple model for describing the two-photon production of W^＋W^- at the LHC. Using this model, we constrain the number of inelastic photons that remain after the experimental cuts are applied.