Multilevel feature moving average ratio method is proposed to realize an open-switch fault diagnosis for any switch of the microgrid inverter. The main steps of the proposed method include multilevel signal decomposit...Multilevel feature moving average ratio method is proposed to realize an open-switch fault diagnosis for any switch of the microgrid inverter. The main steps of the proposed method include multilevel signal decomposition, coefficient reconstruction, absolute average ratio process and artificial neural network(ANN) classification. Specifically, multilevel signal decomposition is realized by using the means of multi resolution analysis to obtain the different frequency band coefficients of the three-phase current signal. The related coefficient reconstruction is executed to achieve signals decomposition in different levels. Furthermore,according to the obtained data, the absolute average ratio process is used to extract absolute moving average ratio of signal decomposition in different levels for the three-phase current.Finally, to intelligently classify the inverter switch fault and realize the adaptive ability, the ANN technology is applied.Compared to conventional fault diagnosis methods, the proposed method can accurately detect and locate the open-switch fault for any location of the microgrid inverter. Additionally, it need not set related threshold of algorithm and does not require normalization process, which is relatively easy to implement. The effectiveness of the proposed fault diagnosis method is demonstrated through detailed simulation results.展开更多
Because there is neither waste rock nor mill tailings in the gypsum mine, and the buildings on the goaf of gypsum mine are needed to be protected, the research proposed the scheme of the clay filling technology. Gypsu...Because there is neither waste rock nor mill tailings in the gypsum mine, and the buildings on the goaf of gypsum mine are needed to be protected, the research proposed the scheme of the clay filling technology. Gypsum, cement, lime and water glass were used as adhesive, and the strength of different material ratios were investigated in this study. The influence factors of clay strength were obtained in the order of cement, gypsum, water glass and lime. The results show that the cement content is the determinant influence factor, and gypsum has positive effects, while the water glass can enhance both clay strength and the fluidity of the filing slurry. Furthermore, combining chaotic optimization method with neural network, the optimal ratio of composite cementing agent was obtained. The results show that the optimal ratio of water glass, cement, lime and clay (in quality) is 1.17:6.74:4.17:87.92 in the process of bottom self-flow filling, while the optimal ratio is 1.78:9.58:4.71:83.93 for roof-contacted filling. A novel filling process to fill in gypsum mine goaf with clay is established. The engineering practice shows that the filling cost is low, thus, notable economic benefit is achieved.展开更多
Ubiquitous radar is a new radar system that provides continuous and uninterrupted multifunction capability within a coverage volume. Continuous coverage from close-in "pop-up" targets in clutter to long-range target...Ubiquitous radar is a new radar system that provides continuous and uninterrupted multifunction capability within a coverage volume. Continuous coverage from close-in "pop-up" targets in clutter to long-range targets impacts selection of waveform parameters. The coherent processing interval (CPI) must be long enough to achieve a certain signal-to-noise ratio (SNR) that ensures the efficiency of detection. The condition of detection in the case of low SNR is analyzed, and three different cases that would occur during integration are discussed and a method to determine the CPI is presented. The simulation results show that targets detection with SNR as low as -26 dB in the experimental system can possibly determine the CPI.展开更多
Heterogeneous network consists of the pico cells overlaid over the macro cell coverage area in a wireless cellular network. The pico cells are deployed to increase the capacity of the homogeneous network by reusing th...Heterogeneous network consists of the pico cells overlaid over the macro cell coverage area in a wireless cellular network. The pico cells are deployed to increase the capacity of the homogeneous network by reusing the spectrum further. However, more users will tend to be associated to the macro cell due to the fact that the transmit power of the pico cell is low. In order to increase the number of users associated to the pico cell, range extension techniques like biased association are used. This will cause severe interference to cell edge users of the pico cell from the macro cell causing degradation in throughput performance in the cell range extension area. In this paper, interference mitigation using receiver processing along with different scheduling techniques is proposed to improve the throughput, average delay, and the packet delivery ratio performance of the system. The performance comparison of the round robin, proportional fair and modified largest weighted delay first (MLWDF) algorithm for resource allocation using interference suppressing receiver is done, and analyzed. It is shown that the MLWDF algorithm achieves the highest throughput with minimum average delay of packets with the best delivery ratio.展开更多
Laboratory experiments were conducted to simulate oil weathering process, a medium to long term weathering process for 210-d, using samples collected from five different oil resources. Based on relative deviation and ...Laboratory experiments were conducted to simulate oil weathering process, a medium to long term weathering process for 210-d, using samples collected from five different oil resources. Based on relative deviation and repeatability limit analysis about indexes of these samples, the results show there had been significant changes in diagnostic ratios among the initial and weathered samples of different oils during this process. Changes of selected n-alkane diagnostic ratios of all oil samples displayed more obviously than diagnostic ratios of terpanes,steranes and PAHs in this process. Almost all selected diagnostic ratios of terpanes, steranes and PAHs can be efficiently used in tracking sources of hydrocarbon pollution, differentiating from the n-alkane diagnostic ratios.In these efficient diagnostic ratios, only four ratios maintained good stability in the weathering processes and are more suitable because their relative deviation(RSD) are lower than 5%.展开更多
A new method based on gray-natural logarithm ratio bilateral filtering is presented for image smoothing in this work. A new gray-natural logarithm ratio range filter kernel, leading to adaptive magnitude from image gr...A new method based on gray-natural logarithm ratio bilateral filtering is presented for image smoothing in this work. A new gray-natural logarithm ratio range filter kernel, leading to adaptive magnitude from image gray distinction information, is pointed out for the bilateral filtering. The new method can not only well restrain noise but also keep much more weak edges and details of an image, and preserve the original color transition of color images. Experimental results show the effectiveness for image denoising with our method.展开更多
In this paper, the 'spectral amplitude ratio method'(SAR) , 'energy method'(EN) and 'coda wave method'(CW) are used to calculate the Q value variations of gneiss in the preparing rupt...In this paper, the 'spectral amplitude ratio method'(SAR) , 'energy method'(EN) and 'coda wave method'(CW) are used to calculate the Q value variations of gneiss in the preparing rupture process. The obtained results show that the variation state of Q values by SAR features the shape of relative stability gradual increment to the maximum then decrement and final rupture.The variation state of Q values by EN is just contrary to that by SAR,i.e.with the shape of stability decrement increment and final rupture . The varation state of Q values by CW is similar to that by EN, its main frequency features the shape of relatively high value decrement to the minimum increment and final rupture.But to the high frequency (higher than the main frequency),the variation state of Q values features the shape of the stable value increment to the maximum decrement and final rupture.At the same time, the results by coda wave amplitude spectrum show that, when stress reaches 70% of rupture stress, the high frequency component of S wave rapidly reduces( Q c increasing); at the time of impending the main rupture, the main frequency component reduces with a large scale( Q c increasing again), this may be the reason which causes the different variation states of two coda Q values.The result of amplitude spectra of P, S(initial wave) waves also show that with the appearance of microcracks the frequency band of S wave turn to be narrow, the high frequency component is reduced quickly, i.e. the S wave spectra have different variation states with different frequeny components. That is why the Q s obtained by different methods have different variation characteristics.展开更多
An accelerated laboratory method(saturated ammonium nitrate solution immersion method) was used to analyze the degradation of cement decalcification process. By studying the changes of intensity, volume, elastic mod...An accelerated laboratory method(saturated ammonium nitrate solution immersion method) was used to analyze the degradation of cement decalcification process. By studying the changes of intensity, volume, elastic modulus, quality, p H value, the Ca/Si, and mineral phase, it could be found that the first cement decalcification degradation process was the decalcification of calcium hydroxide, and then CSH gel, AFm, etc. The secondary ettringite deposition happened and the decalcification degradation depth was proportional to the square root of time. Moreover, the corresponding strength of cement would be gradually reduced, cement rock volume shrinkage occurred, p H values decreased, the surface elastic modulus decreased down to a certain level, and slightly changed and the Ca/Si was 3.1 from the beginning and lasted down to 1.3.展开更多
This Letter gives the general construction of an enhanced self-heterodyne synthetic aperture imaging ladar(SAIL) system, and proposes the principle of image processing. A point target is reconstructed in the enhance...This Letter gives the general construction of an enhanced self-heterodyne synthetic aperture imaging ladar(SAIL) system, and proposes the principle of image processing. A point target is reconstructed in the enhanced self-heterodyne SAIL as well as in down-looking SAIL experiments, and the achieved imaging resolution of the enhanced self-heterodyne SAIL is analyzed. The signal-to-noise ratio(SNR) of the point target final image in the enhanced self-heterodyne SAIL is higher than that in the down-looking SAIL. The enhanced self-heterodyne SAIL can improve the SNR of the target image in far-distance imaging, with practicality.展开更多
This paper studies hypothesis testing in the Ornstein-Ulenbeck process with linear drift. With the help of large and moderate deviations for the log-likelihood ratio process, the decision regions and the corresponding...This paper studies hypothesis testing in the Ornstein-Ulenbeck process with linear drift. With the help of large and moderate deviations for the log-likelihood ratio process, the decision regions and the corresponding decay rates of the error probabilities related to this testing problem are established.展开更多
基金supported by National Natural Science Foundation of China(61473070,61433004)Fundamental Research Funds for the Central Universities(N130504002)SAPI Fundamental Research Funds(2013ZCX01)
文摘Multilevel feature moving average ratio method is proposed to realize an open-switch fault diagnosis for any switch of the microgrid inverter. The main steps of the proposed method include multilevel signal decomposition, coefficient reconstruction, absolute average ratio process and artificial neural network(ANN) classification. Specifically, multilevel signal decomposition is realized by using the means of multi resolution analysis to obtain the different frequency band coefficients of the three-phase current signal. The related coefficient reconstruction is executed to achieve signals decomposition in different levels. Furthermore,according to the obtained data, the absolute average ratio process is used to extract absolute moving average ratio of signal decomposition in different levels for the three-phase current.Finally, to intelligently classify the inverter switch fault and realize the adaptive ability, the ANN technology is applied.Compared to conventional fault diagnosis methods, the proposed method can accurately detect and locate the open-switch fault for any location of the microgrid inverter. Additionally, it need not set related threshold of algorithm and does not require normalization process, which is relatively easy to implement. The effectiveness of the proposed fault diagnosis method is demonstrated through detailed simulation results.
基金supported by the National Basic Research and Development Program of China (No. 2010CB732004)the joint funding of the National Natural Science Foundation and Shanghai Baosteel Group Corporation of China (No. 51074177)
文摘Because there is neither waste rock nor mill tailings in the gypsum mine, and the buildings on the goaf of gypsum mine are needed to be protected, the research proposed the scheme of the clay filling technology. Gypsum, cement, lime and water glass were used as adhesive, and the strength of different material ratios were investigated in this study. The influence factors of clay strength were obtained in the order of cement, gypsum, water glass and lime. The results show that the cement content is the determinant influence factor, and gypsum has positive effects, while the water glass can enhance both clay strength and the fluidity of the filing slurry. Furthermore, combining chaotic optimization method with neural network, the optimal ratio of composite cementing agent was obtained. The results show that the optimal ratio of water glass, cement, lime and clay (in quality) is 1.17:6.74:4.17:87.92 in the process of bottom self-flow filling, while the optimal ratio is 1.78:9.58:4.71:83.93 for roof-contacted filling. A novel filling process to fill in gypsum mine goaf with clay is established. The engineering practice shows that the filling cost is low, thus, notable economic benefit is achieved.
文摘Ubiquitous radar is a new radar system that provides continuous and uninterrupted multifunction capability within a coverage volume. Continuous coverage from close-in "pop-up" targets in clutter to long-range targets impacts selection of waveform parameters. The coherent processing interval (CPI) must be long enough to achieve a certain signal-to-noise ratio (SNR) that ensures the efficiency of detection. The condition of detection in the case of low SNR is analyzed, and three different cases that would occur during integration are discussed and a method to determine the CPI is presented. The simulation results show that targets detection with SNR as low as -26 dB in the experimental system can possibly determine the CPI.
文摘Heterogeneous network consists of the pico cells overlaid over the macro cell coverage area in a wireless cellular network. The pico cells are deployed to increase the capacity of the homogeneous network by reusing the spectrum further. However, more users will tend to be associated to the macro cell due to the fact that the transmit power of the pico cell is low. In order to increase the number of users associated to the pico cell, range extension techniques like biased association are used. This will cause severe interference to cell edge users of the pico cell from the macro cell causing degradation in throughput performance in the cell range extension area. In this paper, interference mitigation using receiver processing along with different scheduling techniques is proposed to improve the throughput, average delay, and the packet delivery ratio performance of the system. The performance comparison of the round robin, proportional fair and modified largest weighted delay first (MLWDF) algorithm for resource allocation using interference suppressing receiver is done, and analyzed. It is shown that the MLWDF algorithm achieves the highest throughput with minimum average delay of packets with the best delivery ratio.
基金The National Natural Science Foundation of China under contract No.41206089Project of on-site sediment microbial remediation of public area of central Bohai Sea,North China Sea Branch of State Oceanic Administration under contract No.QDZC20150420-002Program of Science and Technology Service Network Initiative,Chinese Academy of Sciences under contract No.KFJ-EW-STS-127
文摘Laboratory experiments were conducted to simulate oil weathering process, a medium to long term weathering process for 210-d, using samples collected from five different oil resources. Based on relative deviation and repeatability limit analysis about indexes of these samples, the results show there had been significant changes in diagnostic ratios among the initial and weathered samples of different oils during this process. Changes of selected n-alkane diagnostic ratios of all oil samples displayed more obviously than diagnostic ratios of terpanes,steranes and PAHs in this process. Almost all selected diagnostic ratios of terpanes, steranes and PAHs can be efficiently used in tracking sources of hydrocarbon pollution, differentiating from the n-alkane diagnostic ratios.In these efficient diagnostic ratios, only four ratios maintained good stability in the weathering processes and are more suitable because their relative deviation(RSD) are lower than 5%.
基金the National Natural Science Foundation of China under Grant No.60778046.
文摘A new method based on gray-natural logarithm ratio bilateral filtering is presented for image smoothing in this work. A new gray-natural logarithm ratio range filter kernel, leading to adaptive magnitude from image gray distinction information, is pointed out for the bilateral filtering. The new method can not only well restrain noise but also keep much more weak edges and details of an image, and preserve the original color transition of color images. Experimental results show the effectiveness for image denoising with our method.
文摘In this paper, the 'spectral amplitude ratio method'(SAR) , 'energy method'(EN) and 'coda wave method'(CW) are used to calculate the Q value variations of gneiss in the preparing rupture process. The obtained results show that the variation state of Q values by SAR features the shape of relative stability gradual increment to the maximum then decrement and final rupture.The variation state of Q values by EN is just contrary to that by SAR,i.e.with the shape of stability decrement increment and final rupture . The varation state of Q values by CW is similar to that by EN, its main frequency features the shape of relatively high value decrement to the minimum increment and final rupture.But to the high frequency (higher than the main frequency),the variation state of Q values features the shape of the stable value increment to the maximum decrement and final rupture.At the same time, the results by coda wave amplitude spectrum show that, when stress reaches 70% of rupture stress, the high frequency component of S wave rapidly reduces( Q c increasing); at the time of impending the main rupture, the main frequency component reduces with a large scale( Q c increasing again), this may be the reason which causes the different variation states of two coda Q values.The result of amplitude spectra of P, S(initial wave) waves also show that with the appearance of microcracks the frequency band of S wave turn to be narrow, the high frequency component is reduced quickly, i.e. the S wave spectra have different variation states with different frequeny components. That is why the Q s obtained by different methods have different variation characteristics.
基金Funded by the Natural Science Foundation of Ministry of Housing and Urban-Rural Development of the People's Republic of China(No.2009-K4-27)
文摘An accelerated laboratory method(saturated ammonium nitrate solution immersion method) was used to analyze the degradation of cement decalcification process. By studying the changes of intensity, volume, elastic modulus, quality, p H value, the Ca/Si, and mineral phase, it could be found that the first cement decalcification degradation process was the decalcification of calcium hydroxide, and then CSH gel, AFm, etc. The secondary ettringite deposition happened and the decalcification degradation depth was proportional to the square root of time. Moreover, the corresponding strength of cement would be gradually reduced, cement rock volume shrinkage occurred, p H values decreased, the surface elastic modulus decreased down to a certain level, and slightly changed and the Ca/Si was 3.1 from the beginning and lasted down to 1.3.
基金supported by the National Natural Science Foundation of China(Nos.61605226 and 61505233)the Key Laboratory of Space Laser Communication and Detection Technology of Chinese Academy of Sciences
文摘This Letter gives the general construction of an enhanced self-heterodyne synthetic aperture imaging ladar(SAIL) system, and proposes the principle of image processing. A point target is reconstructed in the enhanced self-heterodyne SAIL as well as in down-looking SAIL experiments, and the achieved imaging resolution of the enhanced self-heterodyne SAIL is analyzed. The signal-to-noise ratio(SNR) of the point target final image in the enhanced self-heterodyne SAIL is higher than that in the down-looking SAIL. The enhanced self-heterodyne SAIL can improve the SNR of the target image in far-distance imaging, with practicality.
文摘This paper studies hypothesis testing in the Ornstein-Ulenbeck process with linear drift. With the help of large and moderate deviations for the log-likelihood ratio process, the decision regions and the corresponding decay rates of the error probabilities related to this testing problem are established.