Is the feminization of labor harmful to agricultural production? The decision-making and production control perspective

Even today,academics continue to debate the effect of feminization of agricultural labor force on agricultural output.By considering the dimensions of participation in decision-making and production,this study divides the various agricultural production models into three types:(i)the traditional model of decisions made either jointly by men and women or by men alone while both genders participate in production,(ii)complete feminization of agricultural decision-making and the production labor force,and(iii)feminization of the agricultural production labor force only.This study investigates the effects of combining or separating decision-making and production in regard to agricultural development in the context of feminization of the agricultural labor force.Using follow-up data collected from 2004–2008 by the Ministry of Agriculture of China,we built a comprehensive panel data model to test our hypotheses.Our research shows that in comparison to traditional agricultural households and fully feminized agricultural labor forces,partially feminized production resulted in lower grain yield and technological advancement.The feminization of agricultural labor does not necessarily have a negative impact on agricultural output,especially since heavy manual labor is being increasingly replaced by agricultural machinery and outsourcing of tasks.The degree of feminization of the decision-making and production processes should be an important consideration when evaluating the purported negative effects of the feminization of agricultural labor.

Geological Controls on the CBM Productivity of No.15 Coal Seam of Carboniferous–Permian Taiyuan Formation in Southern Qinshui Basin and Prediction for CBM High-yield Potential Regions

Coalbed methane(CBM) resources in No.15 coal seam of Taiyuan Formation account for 55% of the total CBM resources in southern Qinshui Basin(SQB), and have a great production potential. This study aims at investigating the CBM production in No.15 coal seam and its influence factors. Based on a series of laboratory experiments and latest exploration and development data from local coal mines and CBM companies, the spatial characteristics of gas production of No.15 coal seam were analyzed and then the influences of seven factors on the gas productivity of this coal seam were discussed, including coal thickness, burial depth, gas content, ratio of critical desorption pressure to original coal reservoir pressure(RCPOP), porosity, permeability, and hydrogeological condition. The influences of hydrological condition on CBM production were analyzed based on the discussions of four aspects: hydrogeochemistry, roof lithology and its distribution, hydrodynamic field of groundwater, and recharge rate of groundwater. Finally, a three-level analytic hierarchy process(AHP) evaluation model was proposed for predicting the CBM potentials of the No.15 coal seam in the SQB. The best prospective target area for CBM production of the No.15 coal seam is predicted to be in the districts of Panzhuang, Chengzhuang and south of Hudi.

Geological characteristics and high production control factors of shale gas reservoirs in Silurian Longmaxi Formation, southern Sichuan Basin, SW China

Marine shale gas resources have great potential in the south of the Sichuan Basin in China.At present,the high-quality shale gas resources at depth of 2000–3500 m are under effective development,and strategic breakthroughs have been made in deeper shale gas resources at depth of 3500–4500 m.To promote the effective production of shale gas in this area,this study examines key factors controlling high shale gas production and presents the next exploration direction in the southern Sichuan Basin based on summarizing the geological understandings from the Lower Silurian Longmaxi Formation shale gas exploration combined with the latest results of geological evaluation.The results show that:(1)The relative sea depth in marine shelf sedimentary environment controls the development and distribution of reservoirs.In the relatively deep water area in deep-water shelf,grade-I reservoirs with a larger continuous thickness develop.The relative depth of sea in marine shelf sedimentary environment can be determined by redox conditions.The research shows that the uranium to thorium mass ratio greater than 1.25 indicates relatively deep water in anoxic reduction environment,and the uranium to thorium mass ratio of 0.75–1.25 indicates semi-deep water in weak reduction and weak oxidation environment,and the uranium to thorium mass ratio less than 0.75 indicates relatively shallow water in strong oxidation environment.(2)The propped fractures in shale reservoirs subject to fracturing treatment are generally 10–12 m high,if grade-I reservoirs are more than 10 m in continuous thickness,then all the propped section would be high-quality reserves;in this case,the longer the continuous thickness of penetrated grade-I reservoirs,the higher the production will be.(3)The shale gas reservoirs at 3500–4500 m depth in southern Sichuan are characterized by high formation pressure,high pressure coefficient,well preserved pores,good pore structure and high proportion of free gas,making them the most favorable new field for shale gas exploration;and the pressure coefficient greater than 1.2 is a necessary condition for shale gas wells to obtain high production.(4)High production wells in the deep shale gas reservoirs are those in areas where Long11-Long13 sub-beds are more than 10 m thick,with 1500 m long horizontal section,grade-I reservoirs penetration rate of over 90%,and fractured by dense cutting+high intensity sand injection+large displacement+large liquid volume.(5)The relatively deep-water area in the deep-water shelf and the area at depth of 3500–4500 m well overlap in the southern Sichuan,and the overlapping area is the most favorable shale gas exploration and development zones in the southern Sichuan in the future.With advancement in theory and technology,annual shale gas production in the southern Sichuan is expected to reach 450×108 m3.

Integrated Product and Process Control for Sustainable Semiconductor Manufacturing

半导体制造是有几百复杂单位操作和它的一个生产序列被策略开发总是为保证没有缺点的产品的收益质问。在这份报纸，通过集成产品和过程控制的先进控制策略被建立。建议多尺度的计划为协调设备控制，进程控制和产品质量控制包含三层。在上面的层，联机控制表演评价被使用减少优秀变化并且最大化全面产品表演(OPP ) 。它用作监督控制在中间的层更新进程控制器的配方。过程控制器作为指数地加权的移动一般水准(EWMA ) 被设计拒绝骚乱的 run-to-run 控制器那例如用坏的过程移动，飘移和工具，被施加到操作。在这个过程的设备个别地被控制维持它的最佳的运作的地位并且最大化全面设备有效性(OEE ) ，基于过程控制器给的集合点。建议综合控制计划的功效通过案例研究被表明，在的地方两 OPP (为产品) 并且 OEE (为设备) 被提高。

Production Characteristics and the Control Factors of Surface Wells for Relieved Methane Drainage in the Huainan Mining Area

Based on the production data of a large number of surface drainage wells in the Huainan mining area,the present study shows that four types of typical production characteristics for relieved methane wells are recognized,of which the stable type for production and gas concentration is the most dominate,as determined by a comprehensive study on the volume and concentration of drained gases, as well as the stress changes of rocks influenced by mining.Some influence factors for the productive differences of the drainage wells were also been discussed.The results indicate that protective coal-seam mining has a significant effect on overlying strata,which promotes the development of pores and fractures of coal reservoirs for methane desorption and migration;however,the production and the stability of drainage wells are affected by deformation and damage of the overlying strata.The second distribution of strata stress is caused by mining engineering,and if the stress load is larger than the carrying capacity of the extraction well,the gas production would be influenced by the drainage well that has been damaged by rock movement.Furthermore,the case damage occurs first in the weak, lithologic interface by its special mechanical properties.The stability of drainage wells and the production status are also influenced by the different drilling techniques,uneven distribution of gas concentration,and combination of gob gas and methane from the protected layer.

An Improved Production Activity Control Architecture for Shop Floor Control

This paper presents a further improved Production Activity Control Architecture to deal with the complexity of information by creating Sub-Producers and Sub-Movers which will not only give a better control at workstation level but also reduce load on the Dispatcher. It also makes an analysis of the basic and improved PAC (Production Activity Control) Architecture in the Control System for Integrated Manufacturing. The PAC Architecture and the improvement will further enhance the flexibility and adaptability of the architecture in the ever changing environment of the Shop Floor Control (SFC) Systems.

Iron Fertilization with Enhanced Phytoplankton Productivity under Minimal Sulfur Compounds and Grazing Control Analysis in HNLC Region

The present study investigated quantitatively the significance of HNLC (high-nutrient low-chlorophyll) regions and its grazing control with the improved iron fertilization for climate change. The limitation of iron (Fe) for phytoplankton growth in HNLC regions was confirmed by sulfur compounds (S) such as volcanic ash and hydrogen sulfide (H2S) in batch cultures, whose chemical sediment of Fe3S4 showed 4.06 wt%. The technologies developed for iron fertilization since 1993 till now were not practical to provide sufficient amounts of bioavailable iron due to sedimentary iron sulfides induced by undersea volcanic sulfur compounds. The proposed technology for iron fertilization was improved to enhance the bioavailable iron to phytoplankton by keeping minimal sulfur compounds in HNLC regions. The low productivity of phytoplankton by grazing control in HNLC regions was 6% diatoms whose 52% was grazed by copepods and 42% by krill on the basis of data analysis in 2000 EisenEx Experiment at boundary of Antarctic and African tectonic plates. All of the previous iron fertilization experiments were conducted at volcanic sulfur compounds enriched HNLC regions. The present study revealed that the enhanced phytoplankton productivity in batch culture without sedimentary iron sulfides can be possible only if sulfur compounds are minimal, as is in Shag Rocks (53°S, 42°W) of South Georgia in Scotia Sea in the Southern Ocean.

Semi-tensor product approach to controllability and stabilizability of finite automata

Using semi-tensor product of matrices, the controllability and stabilizability of finite automata are investigated. By expressing the states, inputs, and outputs in vector forms, the transition and output functions are represented in matrix forms.Based on this algebraic description, a necessary and sufficient condition is proposed for checking whether a state is controllable to another one. By this condition, an algorithm is established to find all the control sequences of an arbitrary length. Moreover, the stabilizability of finite automata is considered, and a necessary and sufficient condition is presented to examine whether some states can be stabilized. Finally, the study of illustrative examples verifies the correctness of the presented results/algorithms.

Development of Sustainable Solutions for Zebra Mussel Control Through Chemical Product Engineering

斑马贻贝是引起大损坏到淡水依赖者工业的一个重要水的害虫，由于这里讨论的工程的主要目标是开发改进答案控制这种的 biofouling.The。三条途径在一次尝试被探索了为存在 bio-cides 设计创新应用程序策略：毒素的(i) 封装；(i i ) 毒素的联合；(iii ) 硬币到毒素的忍耐的季节的变化的调查。在这篇论文，在每个话题的这些途径和主要结果后面的原则被介绍。采用一个化学产品工程的好处在进行这个工程来临也被讨论。

APPLICATION OF IMPROVED PRODUCTION ACTIVITY CONTROL ARCHITECTURE FOR SHOP FLOOR INFORMATION SYSTEM IN DIGITAL MANUFACTURING

Shop floor control （SFC） is responsible for the coordination and control of the manufacturing physical and information flow within the shop floor in the manufacturing system. Weaknesses of the production activity control （PAC） architecture of the shop floor are addressed by the Maglica＇s new system architecture. This architecture gives rise to unlimited number of movers and producers thus evolving more complex but decentralized architecture. Beijing Institute of Technology - production activity control （BIT-PAC） architecture introduces an idea of sub-producars and sub-movers thus reducing the complexity of the architecture. All the equipments including sub-producars and sub-movers are considered to be passive in the proposed shop floor information system. The dissemination of information from sub-producers and sub-movers is done manually through a PC. Proposed BIT-PAC SFC architecture facilitates the information flow from shop floor to the other area of the organization. Effective use of interact information services （IIS） and SQL2000 is done along with the ASP.NET technology to implement the application logic. Applicability of the software based on BIT-PAC architecture is checked by running application software on a network PC that supports the dynamic flow of information from sub-producers and sub-movers to the other parts of the organization. Use of software is also shown at the end for BIT training workshop thus supporting the use of SFC architecture for similar kind of environments.

The Major Recessive Calamities Affecting the Wheat Production in Chuxiong Prefecture and Control Countermeasures

The impact of recessive calamities was analyzed,including seasonal drought,cold injury,dry hot wind and aphid in the wheat production of Chuxiong Prefecture,and the countermeasures that prevented and controlled the recessive calamities in a target-oriented way were proposed,including the improvement of basic farmland,the application of organic manure,the promotion of the breed with high stress resistance,the seedling at suitable date,the improvement of control on fertilizing and watering,the enhancement of management on cultivating and controlling disease in time,and the breeding new variety adaptive to local ecosystem,in order to advance the wheat production in a sustainable way.

Change and control of nitrogen in molten steel production process

The change and control of nitrogen content in molten steel was investigated through the production process of "LDBAr-LF-RH-CC". Results show that nitrogen content reduces gradually in converter-steelmaking stage, rises rapidly from the end of converter process to the end of argon station process, continues to increase in ladle furnace process, and decreases slightly in RH refining stage. Since nitrogen is removed mainly by BOF steelmaking and vacuum refining operations, nitrogen in molten steel should be removed as much as possible in these two operations. However, nitrogen uptake should be minimized in other operations of molten steel production process.

Research on Production Process Control Method Combined Stochastic Process Algebra and Stochastic Petri Nets

A hierarchical closed-loop production control scheme integrating scheduling,control and performance evaluation is discussed.Firstly,the production process is divided into two main hierarchies:the lower level is the physical operation level and the upper one is the management level.Secondly,the schedule template for the management level and the activity template for the physical operation level are constructed separately,the tasks in the schedule have the ability to make partial decisions,and the per- formance parameters are introduced into activity template.Thirdly,the two levels use different model representations:stochastic process algebra for the management level whose output is the control commands and stochastic Petri net for the physical operation lev- el which is the execution of the control commands.Then,the integration of the two levels is the control commands mapping into the lower physical operations and the responses feeding back to the upper decision-making that are defined by some transition functions. Under the proposed scheme,the production process control of a flexible assembly is exemplified.It is concluded that the process con- trol model has partial ability to make decision on-line for uncertain and dynamic environments and facilitates reasoning about the be- haviors of the process control,and performance evaluation can be done online for real-time scheduling to ensure the global optimiza- tion.

The Development of the Production Management and Control System for 10th Assembly Workshop under XAC-CIMS

This paper gives brief introduction to the production management and control system (PMCS) for 10th assembly workshop under Xi’ an Aircraft Company (XAC)--CIMS. Its user requirements 9 structure, ftinctions, and implementation are described. It is showed that the development problems of PMCS can be further reduced to a development methodology for Chinese enterprises, which will make them competitive.

A Listening Test of Controlled-Productive Ability

The purpose of the study is to estimate a new testing method of evaluating the student's ability of Listening Comprehension. The problem to be addressed is whether there is evidence to show that the method can discriminate between the testees, separating the above average students from the average and the below-average studentsThus, the controlled-productive listening test will be' found to be reliable, valid (in that the test distinguished between different proficiency students )and practical.

Production Planning and Control of the Pipeline Assembly Enterprise under SCM

It is vital for pipeline assembly enterprise to respond to changing market needs quickly and keep its cost advantage. A production planning and control （PPC） model under supply chain management combining with operation characteristics of pipeline assembly enterprise was proposed. The present model can realize synchroni- zation in real-time response in production by establishing a win-win corporate model, classified regulation be- tween strategic parts and non-strategic parts, postponing the production of special modules and guaranteeing pro- duction at the bottleneck.

Research and Design on Framework of Quality Risk Control System for Livestock Products

In view of the currant status of the quality risk control of livestock products, the differences between the quality, safety and risk of the livestock products were pointed clearly; the derivative mechanism model of the quality risk was studied; the risk system of livestock products was established; and the types of controllable risk were identified. On this basis, the design principles of risk control framework were established. Then the modular system of risk control was constructed and the attributes of production system were detailed into the describable indicators of risk control based on the thrae-dimensional risks.

Characteristics and control mechanisms of coalbed permeability change in various gas production stages

According to dimensionless analysis of the coalbed methane （CBM） production data of Fanzhuang block in southern Qinshui basin, the dimensionless gas production rate is calculated to quantitatively divide the CBM well production process into four stages, i.e., drai- nage stage, unstable gas production stage, stable gas pro- duction stage, and gas production decline stage. By the material balance method, the coal reservoir permeability change in different stages is quantitatively characterized. The characteristics and control mechanisms of change in coalbed permeability （CICP） during different production stages are concluded on five aspects, i.e., permeability trend variation, controlling mechanism, system energy, phase state compositions, and production performance. The study reveals that CICP is characterized by first decline, then recovery, and finally by increase and is controlled directly by effective stress and matrix shrinkage effects. Further, the duration and intensity of the matrix shrinkage effect are inherently controlled by adsorption and desorp- tion features.

Regulating and Controlling the Rising Prices of Geographical Indication Products in Inflation——taking Geographical Indication Products from Chongqing as an Example

Since July 2010,the prices of geographical indication products have risen with the occurrence of inflation.In contrast with other products,geographical indication products are distinct.The increasing prices of geographical indication goods have their own necessities.From the perspective of the products,they are equipped with appreciation potential due to the cultural pe culiarities.From the historical standpoint,their prices have not been high as well as other agricultural products.Realistically,the increase in their prices results from the costs of labors and raw materials.Therefore,the prices of geographical indication products rise to catch up.Not only are their prices at a reasonable level,but also they are beneficial to increase peasants'income.In con clusion,it is necessary that the strategies which are different from those of other products be adopted to regulate and control the prices of geographical indication products.

Adaptive Control of a Production-Inventory Model with Uncertain Deterioration Rate

This paper studied a continuous-time model of a production maintenance system in which a manufacturing firm produces a single product selling some and stocking the remaining. The problem of adaptive control of a production-maintenance system with unknown deterioration has been presented. Using Liapunov technique, the production rate and updating rule of deterioration rate are derived as non-linear functions of inventory level perturbation. Numerical analysis for the system has been presented for a set of parameter values and demand rate.