Mass Customization and global economic collaboration drives the product development and management beyond internal enterprise to cover the whole product value chain. To meet such requirement, a strategy approach focus...Mass Customization and global economic collaboration drives the product development and management beyond internal enterprise to cover the whole product value chain. To meet such requirement, a strategy approach focusing on data organization for product lifecycle management was promoted. The approach takes product platform as the base, view engine and rule-based access as data access mechanism, and integration and collaboration bus as a enabler to allow participants involved in product lifecycle to get convenient, WEB-based access to the internal and external content, applications, and services.展开更多
Modular technology can effectively support the rapid design of products, and it is one of the key technologies to realize mass customization design. With the application of product lifecycle management(PLM) system in ...Modular technology can effectively support the rapid design of products, and it is one of the key technologies to realize mass customization design. With the application of product lifecycle management(PLM) system in enterprises, the product lifecycle data have been effectively managed. However, these data have not been fully utilized in module division, especially for complex machinery products. To solve this problem, a product module mining method for the PLM database is proposed to improve the effect of module division. Firstly, product data are extracted from the PLM database by data extraction algorithm. Then, data normalization and structure logical inspection are used to preprocess the extracted defective data. The preprocessed product data are analyzed and expressed in a matrix for module mining. Finally, the fuzzy c-means clustering(FCM) algorithm is used to generate product modules, which are stored in product module library after module marking and post-processing. The feasibility and effectiveness of the proposed method are verified by a case study of high pressure valve.展开更多
Engineering Change (EC) management for a Product Lifecycle Management (PLM) system, including EC data model, EC evaluation and EC implementation is presented. A method of dynamic and parallel EC evaluation is proposed...Engineering Change (EC) management for a Product Lifecycle Management (PLM) system, including EC data model, EC evaluation and EC implementation is presented. A method of dynamic and parallel EC evaluation is proposed, which breaks an EC evaluation task into several subtasks. Such subtasks can be dynamically and simultaneously proceeded, disassembled and communicated by different specialists, and at the same time a set of EC objects is created. This approach provides flexible and effective evaluation of the EC. The EC implementation followed will further ensure the completeness and consistency of EC data.展开更多
为了提高汽车覆盖件模具设计变更管理的效率,在其开发过程的基础上,将汽车覆盖件模具的更改分为主动变更和被动变更,并讨论了两类变更的特点,然后分析了不同阶段发生的设计变更对模具开发进度产生的影响.提出了汽车覆盖件模具的设计变...为了提高汽车覆盖件模具设计变更管理的效率,在其开发过程的基础上,将汽车覆盖件模具的更改分为主动变更和被动变更,并讨论了两类变更的特点,然后分析了不同阶段发生的设计变更对模具开发进度产生的影响.提出了汽车覆盖件模具的设计变更流程,并对有关问题进行了探讨,从技术实现的角度,将覆盖件模具的设计更改分为属性、DL(D ie L ayer)数模和结构变更三类,并给出了设计变更在PLM(P roduct L ife cycle M anagem en t)系统T eam cen ter中的实现方法.展开更多
文摘Mass Customization and global economic collaboration drives the product development and management beyond internal enterprise to cover the whole product value chain. To meet such requirement, a strategy approach focusing on data organization for product lifecycle management was promoted. The approach takes product platform as the base, view engine and rule-based access as data access mechanism, and integration and collaboration bus as a enabler to allow participants involved in product lifecycle to get convenient, WEB-based access to the internal and external content, applications, and services.
基金Project(51275362)supported by the National Natural Science Foundation of ChinaProject(2013M542055)supported by China Postdoctoral Science Foundation Funded
文摘Modular technology can effectively support the rapid design of products, and it is one of the key technologies to realize mass customization design. With the application of product lifecycle management(PLM) system in enterprises, the product lifecycle data have been effectively managed. However, these data have not been fully utilized in module division, especially for complex machinery products. To solve this problem, a product module mining method for the PLM database is proposed to improve the effect of module division. Firstly, product data are extracted from the PLM database by data extraction algorithm. Then, data normalization and structure logical inspection are used to preprocess the extracted defective data. The preprocessed product data are analyzed and expressed in a matrix for module mining. Finally, the fuzzy c-means clustering(FCM) algorithm is used to generate product modules, which are stored in product module library after module marking and post-processing. The feasibility and effectiveness of the proposed method are verified by a case study of high pressure valve.
基金Supported by Fujian Province Natural Science Foundation (A04400066)Xiamen Science and Technology Program(3502Z20055028)
文摘Engineering Change (EC) management for a Product Lifecycle Management (PLM) system, including EC data model, EC evaluation and EC implementation is presented. A method of dynamic and parallel EC evaluation is proposed, which breaks an EC evaluation task into several subtasks. Such subtasks can be dynamically and simultaneously proceeded, disassembled and communicated by different specialists, and at the same time a set of EC objects is created. This approach provides flexible and effective evaluation of the EC. The EC implementation followed will further ensure the completeness and consistency of EC data.
文摘为了提高汽车覆盖件模具设计变更管理的效率,在其开发过程的基础上,将汽车覆盖件模具的更改分为主动变更和被动变更,并讨论了两类变更的特点,然后分析了不同阶段发生的设计变更对模具开发进度产生的影响.提出了汽车覆盖件模具的设计变更流程,并对有关问题进行了探讨,从技术实现的角度,将覆盖件模具的设计更改分为属性、DL(D ie L ayer)数模和结构变更三类,并给出了设计变更在PLM(P roduct L ife cycle M anagem en t)系统T eam cen ter中的实现方法.
