Internet financial wealth management product(IFWMP)has recently been one of the most popularity.There is limited quantitative research on IFWMP which can helps customers to choose the products based on the significanc...Internet financial wealth management product(IFWMP)has recently been one of the most popularity.There is limited quantitative research on IFWMP which can helps customers to choose the products based on the significance of each factor.In the paper,a multi-criteria decision-making model of IFWMP was developed,namely analytic hierarchy process(AHP)which is used to make decisions to the unstructured problems through quantifying weights of each criterion.This paper investigated ten influential factors relevant to the purchase of IFWMP and analyzed the frequency of collected responds to show the significance of factors.Based on the quantified weights,the result of the research indicated that compatibility,product liquidity,perceived ease of use and perceived usefulness affect the investors purchasing behaviors most that every investors should pay great attention to.展开更多
Internet financial wealth management product(IFWMP)has recently been one of the most gained popularity.There are limited quantitative research on IFWMP which can help customers to choose products based on the signific...Internet financial wealth management product(IFWMP)has recently been one of the most gained popularity.There are limited quantitative research on IFWMP which can help customers to choose products based on the significance of each factor.In this paper,a multi-criteria decision-making model for IFWMP was developed,namely the analytic hierarchy process(AHP)which is commonly used to make decisions for unstructured problems through quantifying weights of each criterion.This paper investigated ten influential factors relevant to the purchase of IFWMP and analyzed the frequency of collected response to show the significance of the factors.Based on the quantified weights,the results of the research indicated that compatibility,product liquidity,perceived ease of use,and perceived usefulness affected investors purchasing behaviors and that every investor should pay great attention to.展开更多
Modelling based on multi-agent system (MAS) was built for the current production management and process of Shenyang Songyang Paper Cup Co., Ltd. It can transmit the information instantly via order agent (OA), mana...Modelling based on multi-agent system (MAS) was built for the current production management and process of Shenyang Songyang Paper Cup Co., Ltd. It can transmit the information instantly via order agent (OA), manager agent (MA), production agent (PA), and service agent (SA), and realize information sharing. The PA is also built on MAS, and it includes two agents, task agent (TA), and resource agent (RA). It has been found that the modelling is superior to the old one. It can improve the working flow and production efficiency, and shorten the time of delivery.展开更多
Engineering Change (EC) management for a Product Lifecycle Management (PLM) system, including EC data model, EC evaluation and EC implementation is presented. A method of dynamic and parallel EC evaluation is proposed...Engineering Change (EC) management for a Product Lifecycle Management (PLM) system, including EC data model, EC evaluation and EC implementation is presented. A method of dynamic and parallel EC evaluation is proposed, which breaks an EC evaluation task into several subtasks. Such subtasks can be dynamically and simultaneously proceeded, disassembled and communicated by different specialists, and at the same time a set of EC objects is created. This approach provides flexible and effective evaluation of the EC. The EC implementation followed will further ensure the completeness and consistency of EC data.展开更多
Agile manufacturing is a new production mode. This pa per discusses the four problems of production management in the environment of a gile manufacturing, and some countermeasures are advanced: (1) Organization of pro...Agile manufacturing is a new production mode. This pa per discusses the four problems of production management in the environment of a gile manufacturing, and some countermeasures are advanced: (1) Organization of production. Traditional MTO production or MTS production ca n not meet the requirement of agile manufacturing which request both high produc tivity and the manufacturing flexibility. For this, the paper advances best way is to use the production organization mode of MCP (Mass Customization Production ),and some strategies of MCP are discussed. (2) Production planning. The requirement of agile manufacturing to production pl anning embodies in two facets: synchronization and flexibility. The paper su ggests that the structure and function of MRPII system should be improved in ord er to meet the demand of agile manufacturing. (3) Production control. The problem of production control is how to reduce the u ncertainty of hand over time between enterprises and increase the production syn chronization level. The paper advances some research direction on improving production ability. (4) Quality control. The problems of quality management are how to transfer the information of customer’s quality requirement between different organizations an d how to keep the consistency and stability of quality. Some countermeasures are advanced. In the end of the paper, one case advanced administrates how to utilize the thou ghts of agile manufacturing to upgrade the competition ability.展开更多
An enhanced system architecture of Web-based product structure and configuration management system along with its, functions are is presented. The key techniques, such as construction of object models of product str...An enhanced system architecture of Web-based product structure and configuration management system along with its, functions are is presented. The key techniques, such as construction of object models of product structure and product configuration, hybrid approach method in product configuration management, sharing and integration of heterogeneous product data, integration with other sub-systems, are discussed too. A prototype system is developed by J2EE technology.展开更多
PDM (product data management) is one kind of techniques based on software and database, which integrates information and process related to products. But it is not enough to perform the complication of PDM in enterpri...PDM (product data management) is one kind of techniques based on software and database, which integrates information and process related to products. But it is not enough to perform the complication of PDM in enterprises. Then the mechanism to harmonize all kinds of information and process is needed. The paper introduces a novel approach to implement the intelligent monitor of PDM based on MAS (multi agent system). It carries out the management of information and process by MC (monitor center). The paper first puts forward the architecture of the whole system, then defines the structure of MC and its interoperation mode.展开更多
Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s in...Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s include system design, integration of object-oriented technology, data distri bution, collaborative and distributed manufacturing working environment, secur ity, and web-based integration. However, there are limitations on their rese arches. In particular, they cannot cater for PDM in distributed manufacturing e nvironment. This is especially true in South China, where many Hong Kong (HK) ma nufacturers have moved their production plants to different locations in Pearl R iver Delta for cost reduction. However, they retain their main offices in HK. Development of PDM system is inherently complex. Product related data cover prod uct name, product part number (product identification), drawings, material speci fications, dimension requirement, quality specification, test result, log size, production schedules, product data version and date of release, special tooling (e.g. jig and fixture), mould design, project engineering in charge, cost spread sheets, while process data includes engineering release, engineering change info rmation management, and other workflow related to the process information. Accor ding to Cornelissen et al., the contemporary PDM system should contains manageme nt functions in structure, retrieval, release, change, and workflow. In system design, development and implementation, a formal specification is nece ssary. However, there is no formal representation model for PDM system. Theref ore a graphical representation model is constructed to express the various scena rios of interactions between users and the PDM system. Statechart is then used to model the operations of PDM system, Fig.1. Statechart model bridges the curr ent gap between requirements, scenarios, and the initial design specifications o f PDM system. After properly analyzing the PDM system, a new distributed PDM (DPDM) system is proposed. Both graphical representation and statechart models are constructed f or the new DPDM system, Fig.2. New product data of DPDM and new system function s are then investigated to support product information flow in the new distribut ed environment. It is found that statecharts allow formal representations to capture the informa tion and control flows of both PDM and DPDM. In particular, statechart offers a dditional expressive power, when compared to conventional state transition diagr am, in terms of hierarchy, concurrency, history, and timing for DPDM behavioral modeling.展开更多
In order to solve information island problem of offshore oil and gas field production-related information system,including repetitive reporting and input of data,data isolation of central control system,inadequate fol...In order to solve information island problem of offshore oil and gas field production-related information system,including repetitive reporting and input of data,data isolation of central control system,inadequate follow-up analysis and development to support oil and gas field production management,and so on.Therefore,the introduction of MES(Manufacturing Execution System)production execution system in the manufacturing industry and downstream production of offshore oil has become an inevitable choice.This system utilizes the real-time database combined with relational database to collect the scattered structured data,such as the production process real-time data,production management documents and statistical tables of offshore oil and gas production facilities.It establishes a unified data center platform for each operation area and production site,so as to centralize the related production management data at production sites.This system realizes many functions,including the production management support like production report generation as well as presentation and POB,equipment management support like PM optimization,remote configuration and monitoring of production operation,status trend analysis,and production event prediction.The implementation of MES system in offshore oil and gas field production management perfects the overall information system of China National Offshore Oil Corporation more and gradually enhances its comprehensive benefits.展开更多
Before the implementation of product data management (PDM) system, person model and enterprise process model (EPM) must be firstly established. For the convenience of project management, all the related users must be ...Before the implementation of product data management (PDM) system, person model and enterprise process model (EPM) must be firstly established. For the convenience of project management, all the related users must be allocated to the “Person User Role Group” net. Based on the person model and the direction of information flow, the EPM is established subsequently. The EPM consists of several release levels, in which the access controls are defined. The EPM procedure shows the blueprint of the workflow process structure. The establishment of person model and EPM in an enterprise has been instanced at the end of this paper.展开更多
The Three Gorges Hydropower Plant is the one with the largest installed capacity in the world today and has a decisive and important influence upon the security of the national power grids. It has been operated stably...The Three Gorges Hydropower Plant is the one with the largest installed capacity in the world today and has a decisive and important influence upon the security of the national power grids. It has been operated stably and supplied the East China, Central China, South China, Sichuan and Chongqing with clean renewable energy. This paper presents the management of the project’s dispatch, operation and maintenance and puts forward new ideas and new methods for the plant management, which may provide valuable references for the operation of oversized hydropower plants.展开更多
An integrated production planning and control model based on MRPⅡand JIT is put forward through analyzing the characteristics of magnetic materials manufacturing companies. Master Production Schedule with limited cap...An integrated production planning and control model based on MRPⅡand JIT is put forward through analyzing the characteristics of magnetic materials manufacturing companies. Master Production Schedule with limited capacity and operational plan in workshop level based on the basic data of flow chart are formulated by this model which applied JIT idea and based on customer order demand. Push production is adapted during execution phase combined with process flow cards. The model is helpful to reduce inventory,keep certain flexbility of production and improve continuity and equilibrium of manufacturing process.展开更多
The implementation of product development process management (PDPM) is an effective means of developing products with higher quality in shorter lead time. It is argued in this paper that product, data, person and acti...The implementation of product development process management (PDPM) is an effective means of developing products with higher quality in shorter lead time. It is argued in this paper that product, data, person and activity are basic factors in PDPM With detailed analysis of these basic factors and their relations in product developmed process, all product development activities are considered as tasks and the management of product development process is regarded as the management of task execution A task decomposition based product development model is proposed with methods of constructing task relation matrix from layer model and constraint model resulted from task decomposition. An algorithm for constructing directed task graph is given and is used in the management of tasks. Finally, the usage and limitation of the proposed PDPM model is given with further work proposed.展开更多
In concurrent engineering, effective process management is the key to improve the efficiency and quality of product development. Although in project management system, workflow management system and PDM system, proces...In concurrent engineering, effective process management is the key to improve the efficiency and quality of product development. Although in project management system, workflow management system and PDM system, process management functions are provided, they can not meet the needs of product development. In this paper, we integrate the project management, workflow management and product management technique together and a concurrent engineering oriented integrated product development process management system is proposed. The system structure, integrated product development model and running method are introduced. The practice proves this system is powerful in supporting product development process.展开更多
introduced are the main implementation contents and brought out is a cycle optimal PDMimplementation methodology by phases through studying requirements of enterprises' datamanagement and summarizing the existing ...introduced are the main implementation contents and brought out is a cycle optimal PDMimplementation methodology by phases through studying requirements of enterprises' datamanagement and summarizing the existing method. The implementation contents include documentsmanagement product structure and configuration management, product classification and codingmanagement, workflow management and software encapsulation. It divides the PDM implementationinto preparing, software selechon and training, implementation plan making, concrete implementingand evaluating. By the cycle of the last two pheses, the successful implementation of PDM can beobtained. This methodology has been used in the CIMS project of two companies and proved to bepractical.展开更多
This study aims to assess the small ruminant value chain in Al-Ruwaished District,Jordan,to identify the potential intervention areas that could improve the production efficiency and guarantee the sustainability of th...This study aims to assess the small ruminant value chain in Al-Ruwaished District,Jordan,to identify the potential intervention areas that could improve the production efficiency and guarantee the sustainability of the small ruminant sector in this area.Sheep breeding is the source of livelihood for most of the people in Al-Ruwaished District,which is characterized by the large number of sheep and goats.We surveyed 5.0% of the small ruminant holders in the study area and conducted individual interviews and surveys with the potential actors in the value chain to undertake a small ruminant value chain analysis.From the survey,we found that the small ruminant value chain consists of five core functions,namely,input supply,production management,marketing,processing,and consumption.Despite the stable impression given by the large number of holdings in the small ruminant sector,the surveyed results show a clear fragility in the value chain of small ruminants in this area.The small ruminant production system is negatively impacted by climate change,especially continuous drought.In addition,the high prices of feed that the farmer cannot afford with clear and real absence of the governmental and non-governmental support activities also impact the development of the value chain.The results of strengths,weaknesses,opportunities,and threats(SWOT)analysis reveal that the major constraints faced by this value chain could be divided into external and internal threats.Specifically,the most prominent external threats are the nature of the desert land and continuous drought,while the major internal threats are the absence of appropriate infrastructure,shortage of inputs,and weakness in the production management and marketing.We proposed solutions to these challenges to ensure the sustainability and effectiveness of the sector,such as the formulation of emergency response plans to severe weather,qualifying farmers’skills,and establishment of agricultural cooperative societies.展开更多
Some key techniques for the development of web-based product data management (PDM) system are introduced. The four-tiered B/S architecture of a PDM system-BITPDM is introduced first, followed by its design and imple...Some key techniques for the development of web-based product data management (PDM) system are introduced. The four-tiered B/S architecture of a PDM system-BITPDM is introduced first, followed by its design and implementation, including virtual data vault, flexible coding system, document management, product structure and configuration management, workflow/process and product maturity management. BITPDM can facilitate the activities from new product introduction phase to manufacturing, and manage the product data andtheir dynamic changing history. Based on Microsoft. NET, XML, web service and SOAP techniques, BITPDM realizes the integration and efficient management of product information.展开更多
The author uses system analysis to provide system thinkings of the deepening reform of the management of defence science, technology and industry (DSTI) and investigate the system definition of DSTI, the system reform...The author uses system analysis to provide system thinkings of the deepening reform of the management of defence science, technology and industry (DSTI) and investigate the system definition of DSTI, the system reform target, system operational mechanism, institutional structure, coordination and control functions and the orientation of conversion in China.展开更多
Aerated irrigation has been proven to increase crop production and quality, but studies on its environmental impacts are sparse. The effects of aeration and irrigation regimes on soil CO2 and N2O emissions in two cons...Aerated irrigation has been proven to increase crop production and quality, but studies on its environmental impacts are sparse. The effects of aeration and irrigation regimes on soil CO2 and N2O emissions in two consecutive greenhouse tomato rotation cycles in Northwest China were studied via the static closed chamber and gas chromatography technique. Four treatments, aerated deficit irrigation(AI1), non-aerated deficit irrigation(CK1), aerated full irrigation(AI2) and non-aerated full irrigation(CK2), were performed. The results showed that the tomato yield under aeration of each irrigation regime increased by 18.8% on average compared to non-aeration, and the difference was significant under full irrigation(P〈0.05). Full irrigation significantly increased the tomato yield by 23.9% on average in comparison to deficit irrigation. Moreover, aeration increased the cumulative CO2 emissions compared to non-aeration, and treatment effects were significant in the autumn-winter season(P〈0.05). A slight increase of CO2 emissions in the two seasons was observed under full irrigation(P〉0.05). There was no significant difference between aeration and non-aeration in soil N2O emissions in the spring-summer season, whereas aeration enhanced N2O emissions significantly in the autumn-winter season. Furthermore, full irrigation over the two seasons greatly increased soil N2O emissions compared to the deficit irrigation treatment(P〈0.05). Correlation analysis indicated that soil temperature was the primary factor influencing CO2 fluxes. Soil temperature, soil moisture and NO3^- were the primary factors influencing N2O fluxes. Irrigation coupled with particular soil aeration practices may allow for a balance between crop production yield and greenhouse gas mitigation in greenhouse vegetable fields.展开更多
A version of a product consists of the product structure tree and the versions of all its components. The model includes two sets of data: attributes and documents describing each component. The paper discusses the v...A version of a product consists of the product structure tree and the versions of all its components. The model includes two sets of data: attributes and documents describing each component. The paper discusses the version change relations between a sub-node component and a up-node component in a product structure tree, analyzes the version control system for a static reference and that for a dynamic reference and proposes a product structure model in support of dynamic reference, which is easy to use and contains a complete set of information providing an essential way of data organization for the PDM system.展开更多
文摘Internet financial wealth management product(IFWMP)has recently been one of the most popularity.There is limited quantitative research on IFWMP which can helps customers to choose the products based on the significance of each factor.In the paper,a multi-criteria decision-making model of IFWMP was developed,namely analytic hierarchy process(AHP)which is used to make decisions to the unstructured problems through quantifying weights of each criterion.This paper investigated ten influential factors relevant to the purchase of IFWMP and analyzed the frequency of collected responds to show the significance of factors.Based on the quantified weights,the result of the research indicated that compatibility,product liquidity,perceived ease of use and perceived usefulness affect the investors purchasing behaviors most that every investors should pay great attention to.
文摘Internet financial wealth management product(IFWMP)has recently been one of the most gained popularity.There are limited quantitative research on IFWMP which can help customers to choose products based on the significance of each factor.In this paper,a multi-criteria decision-making model for IFWMP was developed,namely the analytic hierarchy process(AHP)which is commonly used to make decisions for unstructured problems through quantifying weights of each criterion.This paper investigated ten influential factors relevant to the purchase of IFWMP and analyzed the frequency of collected response to show the significance of the factors.Based on the quantified weights,the results of the research indicated that compatibility,product liquidity,perceived ease of use,and perceived usefulness affected investors purchasing behaviors and that every investor should pay great attention to.
文摘Modelling based on multi-agent system (MAS) was built for the current production management and process of Shenyang Songyang Paper Cup Co., Ltd. It can transmit the information instantly via order agent (OA), manager agent (MA), production agent (PA), and service agent (SA), and realize information sharing. The PA is also built on MAS, and it includes two agents, task agent (TA), and resource agent (RA). It has been found that the modelling is superior to the old one. It can improve the working flow and production efficiency, and shorten the time of delivery.
基金Supported by Fujian Province Natural Science Foundation (A04400066)Xiamen Science and Technology Program(3502Z20055028)
文摘Engineering Change (EC) management for a Product Lifecycle Management (PLM) system, including EC data model, EC evaluation and EC implementation is presented. A method of dynamic and parallel EC evaluation is proposed, which breaks an EC evaluation task into several subtasks. Such subtasks can be dynamically and simultaneously proceeded, disassembled and communicated by different specialists, and at the same time a set of EC objects is created. This approach provides flexible and effective evaluation of the EC. The EC implementation followed will further ensure the completeness and consistency of EC data.
文摘Agile manufacturing is a new production mode. This pa per discusses the four problems of production management in the environment of a gile manufacturing, and some countermeasures are advanced: (1) Organization of production. Traditional MTO production or MTS production ca n not meet the requirement of agile manufacturing which request both high produc tivity and the manufacturing flexibility. For this, the paper advances best way is to use the production organization mode of MCP (Mass Customization Production ),and some strategies of MCP are discussed. (2) Production planning. The requirement of agile manufacturing to production pl anning embodies in two facets: synchronization and flexibility. The paper su ggests that the structure and function of MRPII system should be improved in ord er to meet the demand of agile manufacturing. (3) Production control. The problem of production control is how to reduce the u ncertainty of hand over time between enterprises and increase the production syn chronization level. The paper advances some research direction on improving production ability. (4) Quality control. The problems of quality management are how to transfer the information of customer’s quality requirement between different organizations an d how to keep the consistency and stability of quality. Some countermeasures are advanced. In the end of the paper, one case advanced administrates how to utilize the thou ghts of agile manufacturing to upgrade the competition ability.
基金Supported by the National High-Tech. R&D Program for CIMS China (Grant No. 2001AA412180)
文摘An enhanced system architecture of Web-based product structure and configuration management system along with its, functions are is presented. The key techniques, such as construction of object models of product structure and product configuration, hybrid approach method in product configuration management, sharing and integration of heterogeneous product data, integration with other sub-systems, are discussed too. A prototype system is developed by J2EE technology.
文摘PDM (product data management) is one kind of techniques based on software and database, which integrates information and process related to products. But it is not enough to perform the complication of PDM in enterprises. Then the mechanism to harmonize all kinds of information and process is needed. The paper introduces a novel approach to implement the intelligent monitor of PDM based on MAS (multi agent system). It carries out the management of information and process by MC (monitor center). The paper first puts forward the architecture of the whole system, then defines the structure of MC and its interoperation mode.
文摘Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s include system design, integration of object-oriented technology, data distri bution, collaborative and distributed manufacturing working environment, secur ity, and web-based integration. However, there are limitations on their rese arches. In particular, they cannot cater for PDM in distributed manufacturing e nvironment. This is especially true in South China, where many Hong Kong (HK) ma nufacturers have moved their production plants to different locations in Pearl R iver Delta for cost reduction. However, they retain their main offices in HK. Development of PDM system is inherently complex. Product related data cover prod uct name, product part number (product identification), drawings, material speci fications, dimension requirement, quality specification, test result, log size, production schedules, product data version and date of release, special tooling (e.g. jig and fixture), mould design, project engineering in charge, cost spread sheets, while process data includes engineering release, engineering change info rmation management, and other workflow related to the process information. Accor ding to Cornelissen et al., the contemporary PDM system should contains manageme nt functions in structure, retrieval, release, change, and workflow. In system design, development and implementation, a formal specification is nece ssary. However, there is no formal representation model for PDM system. Theref ore a graphical representation model is constructed to express the various scena rios of interactions between users and the PDM system. Statechart is then used to model the operations of PDM system, Fig.1. Statechart model bridges the curr ent gap between requirements, scenarios, and the initial design specifications o f PDM system. After properly analyzing the PDM system, a new distributed PDM (DPDM) system is proposed. Both graphical representation and statechart models are constructed f or the new DPDM system, Fig.2. New product data of DPDM and new system function s are then investigated to support product information flow in the new distribut ed environment. It is found that statecharts allow formal representations to capture the informa tion and control flows of both PDM and DPDM. In particular, statechart offers a dditional expressive power, when compared to conventional state transition diagr am, in terms of hierarchy, concurrency, history, and timing for DPDM behavioral modeling.
文摘In order to solve information island problem of offshore oil and gas field production-related information system,including repetitive reporting and input of data,data isolation of central control system,inadequate follow-up analysis and development to support oil and gas field production management,and so on.Therefore,the introduction of MES(Manufacturing Execution System)production execution system in the manufacturing industry and downstream production of offshore oil has become an inevitable choice.This system utilizes the real-time database combined with relational database to collect the scattered structured data,such as the production process real-time data,production management documents and statistical tables of offshore oil and gas production facilities.It establishes a unified data center platform for each operation area and production site,so as to centralize the related production management data at production sites.This system realizes many functions,including the production management support like production report generation as well as presentation and POB,equipment management support like PM optimization,remote configuration and monitoring of production operation,status trend analysis,and production event prediction.The implementation of MES system in offshore oil and gas field production management perfects the overall information system of China National Offshore Oil Corporation more and gradually enhances its comprehensive benefits.
文摘Before the implementation of product data management (PDM) system, person model and enterprise process model (EPM) must be firstly established. For the convenience of project management, all the related users must be allocated to the “Person User Role Group” net. Based on the person model and the direction of information flow, the EPM is established subsequently. The EPM consists of several release levels, in which the access controls are defined. The EPM procedure shows the blueprint of the workflow process structure. The establishment of person model and EPM in an enterprise has been instanced at the end of this paper.
文摘The Three Gorges Hydropower Plant is the one with the largest installed capacity in the world today and has a decisive and important influence upon the security of the national power grids. It has been operated stably and supplied the East China, Central China, South China, Sichuan and Chongqing with clean renewable energy. This paper presents the management of the project’s dispatch, operation and maintenance and puts forward new ideas and new methods for the plant management, which may provide valuable references for the operation of oversized hydropower plants.
基金supported by Ministry of Education Social Science and Humanities Fund(12YJA630187)SHANNXI Social Science Fund(10Q067)High Education Research Fund of Northwestern Polytechnical University(2014)
文摘An integrated production planning and control model based on MRPⅡand JIT is put forward through analyzing the characteristics of magnetic materials manufacturing companies. Master Production Schedule with limited capacity and operational plan in workshop level based on the basic data of flow chart are formulated by this model which applied JIT idea and based on customer order demand. Push production is adapted during execution phase combined with process flow cards. The model is helpful to reduce inventory,keep certain flexbility of production and improve continuity and equilibrium of manufacturing process.
文摘The implementation of product development process management (PDPM) is an effective means of developing products with higher quality in shorter lead time. It is argued in this paper that product, data, person and activity are basic factors in PDPM With detailed analysis of these basic factors and their relations in product developmed process, all product development activities are considered as tasks and the management of product development process is regarded as the management of task execution A task decomposition based product development model is proposed with methods of constructing task relation matrix from layer model and constraint model resulted from task decomposition. An algorithm for constructing directed task graph is given and is used in the management of tasks. Finally, the usage and limitation of the proposed PDPM model is given with further work proposed.
文摘In concurrent engineering, effective process management is the key to improve the efficiency and quality of product development. Although in project management system, workflow management system and PDM system, process management functions are provided, they can not meet the needs of product development. In this paper, we integrate the project management, workflow management and product management technique together and a concurrent engineering oriented integrated product development process management system is proposed. The system structure, integrated product development model and running method are introduced. The practice proves this system is powerful in supporting product development process.
文摘introduced are the main implementation contents and brought out is a cycle optimal PDMimplementation methodology by phases through studying requirements of enterprises' datamanagement and summarizing the existing method. The implementation contents include documentsmanagement product structure and configuration management, product classification and codingmanagement, workflow management and software encapsulation. It divides the PDM implementationinto preparing, software selechon and training, implementation plan making, concrete implementingand evaluating. By the cycle of the last two pheses, the successful implementation of PDM can beobtained. This methodology has been used in the CIMS project of two companies and proved to bepractical.
文摘This study aims to assess the small ruminant value chain in Al-Ruwaished District,Jordan,to identify the potential intervention areas that could improve the production efficiency and guarantee the sustainability of the small ruminant sector in this area.Sheep breeding is the source of livelihood for most of the people in Al-Ruwaished District,which is characterized by the large number of sheep and goats.We surveyed 5.0% of the small ruminant holders in the study area and conducted individual interviews and surveys with the potential actors in the value chain to undertake a small ruminant value chain analysis.From the survey,we found that the small ruminant value chain consists of five core functions,namely,input supply,production management,marketing,processing,and consumption.Despite the stable impression given by the large number of holdings in the small ruminant sector,the surveyed results show a clear fragility in the value chain of small ruminants in this area.The small ruminant production system is negatively impacted by climate change,especially continuous drought.In addition,the high prices of feed that the farmer cannot afford with clear and real absence of the governmental and non-governmental support activities also impact the development of the value chain.The results of strengths,weaknesses,opportunities,and threats(SWOT)analysis reveal that the major constraints faced by this value chain could be divided into external and internal threats.Specifically,the most prominent external threats are the nature of the desert land and continuous drought,while the major internal threats are the absence of appropriate infrastructure,shortage of inputs,and weakness in the production management and marketing.We proposed solutions to these challenges to ensure the sustainability and effectiveness of the sector,such as the formulation of emergency response plans to severe weather,qualifying farmers’skills,and establishment of agricultural cooperative societies.
文摘Some key techniques for the development of web-based product data management (PDM) system are introduced. The four-tiered B/S architecture of a PDM system-BITPDM is introduced first, followed by its design and implementation, including virtual data vault, flexible coding system, document management, product structure and configuration management, workflow/process and product maturity management. BITPDM can facilitate the activities from new product introduction phase to manufacturing, and manage the product data andtheir dynamic changing history. Based on Microsoft. NET, XML, web service and SOAP techniques, BITPDM realizes the integration and efficient management of product information.
文摘The author uses system analysis to provide system thinkings of the deepening reform of the management of defence science, technology and industry (DSTI) and investigate the system definition of DSTI, the system reform target, system operational mechanism, institutional structure, coordination and control functions and the orientation of conversion in China.
基金supported by the National Natural Science Foundation of China (51309192)the National Key Research and Development Program of China (2016YFC0400201)the Fundamental Research Funds for the Central Universities, China (Z109021510)
文摘Aerated irrigation has been proven to increase crop production and quality, but studies on its environmental impacts are sparse. The effects of aeration and irrigation regimes on soil CO2 and N2O emissions in two consecutive greenhouse tomato rotation cycles in Northwest China were studied via the static closed chamber and gas chromatography technique. Four treatments, aerated deficit irrigation(AI1), non-aerated deficit irrigation(CK1), aerated full irrigation(AI2) and non-aerated full irrigation(CK2), were performed. The results showed that the tomato yield under aeration of each irrigation regime increased by 18.8% on average compared to non-aeration, and the difference was significant under full irrigation(P〈0.05). Full irrigation significantly increased the tomato yield by 23.9% on average in comparison to deficit irrigation. Moreover, aeration increased the cumulative CO2 emissions compared to non-aeration, and treatment effects were significant in the autumn-winter season(P〈0.05). A slight increase of CO2 emissions in the two seasons was observed under full irrigation(P〉0.05). There was no significant difference between aeration and non-aeration in soil N2O emissions in the spring-summer season, whereas aeration enhanced N2O emissions significantly in the autumn-winter season. Furthermore, full irrigation over the two seasons greatly increased soil N2O emissions compared to the deficit irrigation treatment(P〈0.05). Correlation analysis indicated that soil temperature was the primary factor influencing CO2 fluxes. Soil temperature, soil moisture and NO3^- were the primary factors influencing N2O fluxes. Irrigation coupled with particular soil aeration practices may allow for a balance between crop production yield and greenhouse gas mitigation in greenhouse vegetable fields.
基金Supported by the Fundamental Fujian Nature Science (A0440006) and Xiamen Science & Technology Project (3502Z20055028)
文摘A version of a product consists of the product structure tree and the versions of all its components. The model includes two sets of data: attributes and documents describing each component. The paper discusses the version change relations between a sub-node component and a up-node component in a product structure tree, analyzes the version control system for a static reference and that for a dynamic reference and proposes a product structure model in support of dynamic reference, which is easy to use and contains a complete set of information providing an essential way of data organization for the PDM system.