This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)tr...This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)transistor level design where MOSFET transistors operating in the saturation region are adopted.The proposed CAB architecture is designed to implement six of thewidely used current mode operations in analog processing systems:addition,subtraction,integration,multiplication,division,and pass operation.The functionality of the proposed CAB is demonstrated through these six operations,where each operation is chosen based on the user’s selection in the CAB interface system.The architecture of the CAB system proposes an optimized way of designing and integrating only three functional cells with the interface circuitry to achieve the six operations.Furthermore,optimized programming and digital tuning circuitry are implemented in the architecture to control and interface with the functional cells.Moreover,these designed programming and tuning circuitries play an essential role in optimizing the performance of the proposed design.Simulation of the proposed CMOS Transistor Based CAB system is carried out using Tanner EDA Tools in 0.35μm standard CMOS technology.The design uses a±1.5 V power supply and results in maximum 3 dB bandwidth of 34.9 MHz and an approximate size of 0.0537 mm2.This demonstrates the advantages of the design over the current state-of-the-art designs presented for comparison in this article.Consequently,the proposed design has a clear aspect of simplicity,low power consumption,and high bandwidth operation,which makes it a suitable candidate for mobile telecommunications applications.展开更多
The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arr...The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arrays(FPGAs).In this paper,we present a new design methodology which using FPAA as a powerful analog front-end processing platform in the smart sensory microsystem.The proposed FPAA contains 16 homogeneous mixed-grained Configurable Analog Blocks(CABs) which house a variety of processing elements especially the proposed fine-grained Core Configurable Amplifiers(CCAs).The high flexible CABs allow the FPAA operating in both continuous-time and discrete-time approaches suitable to support variety of sensors.To reduce the nonideal parasitic effects and save area,the fat-tree interconnection network is adopted in this FPAA.The functionality of this FPAA is demonstrated through embedding of voltage and capacitive sensor signal readout circuits and a configurable band pass filter.The minimal detectable voltage and capacitor achieves 38 uV and 8.3 aF respectively within 100 Hz sensor bandwidth.The power consumption comparison of CCA in three applications shows that the FPAA has high power efficiency.And the simulation results also show that the FPAA has good tolerance with wide PVT variations.展开更多
The widely used sensitive elements of humidity sensors can be divided into 3 types,i.e.,resistor,capacitor,and electrolyte.Humidity sensors consisting of these sensitive elements have corresponding signal processing c...The widely used sensitive elements of humidity sensors can be divided into 3 types,i.e.,resistor,capacitor,and electrolyte.Humidity sensors consisting of these sensitive elements have corresponding signal processing circuit unique to each type of sensitive elements.This paper presents an ispPAC (in-system programmable Programmable Analog Circuit) -based humidity sensor signal processing circuit designed with software method and implemented with in-system programmable simulators.Practical operation shows that humidity sensor signal processing circuits of this kind,exhibit stable and reliable performance.展开更多
基金This work was supported in part by the Geran Galakan Penyelidik Muda Grant(GGPM),Universiti Kebangsaan Malaysia,Selangor,Malaysia under grant GGPM-2021-055.
文摘This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)transistor level design where MOSFET transistors operating in the saturation region are adopted.The proposed CAB architecture is designed to implement six of thewidely used current mode operations in analog processing systems:addition,subtraction,integration,multiplication,division,and pass operation.The functionality of the proposed CAB is demonstrated through these six operations,where each operation is chosen based on the user’s selection in the CAB interface system.The architecture of the CAB system proposes an optimized way of designing and integrating only three functional cells with the interface circuitry to achieve the six operations.Furthermore,optimized programming and digital tuning circuitry are implemented in the architecture to control and interface with the functional cells.Moreover,these designed programming and tuning circuitries play an essential role in optimizing the performance of the proposed design.Simulation of the proposed CMOS Transistor Based CAB system is carried out using Tanner EDA Tools in 0.35μm standard CMOS technology.The design uses a±1.5 V power supply and results in maximum 3 dB bandwidth of 34.9 MHz and an approximate size of 0.0537 mm2.This demonstrates the advantages of the design over the current state-of-the-art designs presented for comparison in this article.Consequently,the proposed design has a clear aspect of simplicity,low power consumption,and high bandwidth operation,which makes it a suitable candidate for mobile telecommunications applications.
基金Supported by the CAS/SAFEA International Partnership Program for Creative Research Teams,National High Technology Research and Develop Program of China(2012AA012301)National Science and Technology Major Project of China(2013ZX03006004)
文摘The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arrays(FPGAs).In this paper,we present a new design methodology which using FPAA as a powerful analog front-end processing platform in the smart sensory microsystem.The proposed FPAA contains 16 homogeneous mixed-grained Configurable Analog Blocks(CABs) which house a variety of processing elements especially the proposed fine-grained Core Configurable Amplifiers(CCAs).The high flexible CABs allow the FPAA operating in both continuous-time and discrete-time approaches suitable to support variety of sensors.To reduce the nonideal parasitic effects and save area,the fat-tree interconnection network is adopted in this FPAA.The functionality of this FPAA is demonstrated through embedding of voltage and capacitive sensor signal readout circuits and a configurable band pass filter.The minimal detectable voltage and capacitor achieves 38 uV and 8.3 aF respectively within 100 Hz sensor bandwidth.The power consumption comparison of CCA in three applications shows that the FPAA has high power efficiency.And the simulation results also show that the FPAA has good tolerance with wide PVT variations.
文摘The widely used sensitive elements of humidity sensors can be divided into 3 types,i.e.,resistor,capacitor,and electrolyte.Humidity sensors consisting of these sensitive elements have corresponding signal processing circuit unique to each type of sensitive elements.This paper presents an ispPAC (in-system programmable Programmable Analog Circuit) -based humidity sensor signal processing circuit designed with software method and implemented with in-system programmable simulators.Practical operation shows that humidity sensor signal processing circuits of this kind,exhibit stable and reliable performance.