This paper presents an investigation of the disproportionate collapse of multi-store steel buildings in a natural fire situation due to the progressive failure of their columns.For this purpose,it is intended to evalu...This paper presents an investigation of the disproportionate collapse of multi-store steel buildings in a natural fire situation due to the progressive failure of their columns.For this purpose,it is intended to evaluate the effects of the redistribution of stress and vertical displacements of columns with the evolution of the temperature addressing,also,the impacts of the localized faults of these structural elements.In addition,another objective of this paper is the development of a practical analysis approach,which is called by successive approximations.As a methodology,advanced computational techniques were developed to predict the structural behavior of the building as the temperature reduces the strength and stiffness of its structural elements.For the parametric study,the overall response of the building was investigated through fire simulations in many columns.The results showed that the phenomenon of redistribution of stresses that occur during the heating period is essentially due to the reduction in the modulus of elasticity of the steel.In addition,the study pointed out that the use of advanced computational techniques through the use of successive approximations technique is an excellent alternative to study the progressive collapse of buildings subject to high temperatures.展开更多
As a key supporting equipment for the construction of LNG carriers,the installation platform undertakes the support and guarantee of LNG carrier tank internal construction.This paper takes the secondary shielding inst...As a key supporting equipment for the construction of LNG carriers,the installation platform undertakes the support and guarantee of LNG carrier tank internal construction.This paper takes the secondary shielding installation platform of A-type tank as the object of study,the study firstly considers the semi-rigidity of the nodes and the material nonlinearity based on finite element software,and then the residual structure is calculated using static nonlinear method after single truss,two trusses and three trusses are invalid simultaneously.The research results show that the truss with higher components importance coefficient has greater impact on the residual structure when the truss is invalid;After the 2 trusses of installation platform become invalid completely,the further progressive collapse will not occur;When A1-HJ,A2-HJ and A2-HJ are dismantled at the same time,it will lead to the local progressive damage,which can cause the collapse of large-scale structures.The research findings can support the design and use of the installation platform.展开更多
Progressive collapse is a relatively rare event which happens due to unusual loading on a structure that lacks adequate continuity,ductility and indeterminacy which causes local collapse in that structure and then ext...Progressive collapse is a relatively rare event which happens due to unusual loading on a structure that lacks adequate continuity,ductility and indeterminacy which causes local collapse in that structure and then extends it to other structural parts.The US department of defense published UFC4-023-03 regulation regarding the building design against progressive collapse.This regulation,based on the ASCE 7-05 standard,introduces two general approaches to building design against progressive collapse,including direct design and indirect design approaches.In this study,a variety of structural design methods for progressive collapse have been investigated.Moreover,their strengths and weaknesses have been mentioned.In general,the results of this study show that design based on alternative path(AP)method is more economical than other methods.Moreover,application of AP method is much more commonly accepted by researchers and designers.展开更多
The vulnerability of reinforced concrete(RC)building systems to progressive collapse has turned out to be a challenging trouble for professional structural engineers so as to prevent total failure on account of ...The vulnerability of reinforced concrete(RC)building systems to progressive collapse has turned out to be a challenging trouble for professional structural engineers so as to prevent total failure on account of nearby damage.The goal of this paper is to enhance the knowledge of such buildings’behavior underneath several scenarios of misplaced columns at different floor stages,and their capacity for progressive collapse.The homes had been analyzed following the guidelines for progressive collapse evaluation and design organized by means of the general services administration guidelines(GSA).The progressive collapse of a ten story structure subjected to a simplest gravity load is taken into consideration and the column has been eliminated at one place and the spread damage is evaluated.The progressive collapse study has been carried out by way of removing the column at a diagnosed crucial locations(at corner,middle and at interior)as in line with GSA guidelines.Static analysis is done using analysis program ETABS.For each case,the consequences were taken in terms of demand capacity ratio(DCR)at critical section,and as a result the structure has been assessed for it’s susceptible to progressive collapse.The availability of shear wall is made on the component wherein collapse occurred and DCR values are mentioned.After imparting the shear wall to the structure,the progressive collapse of the structure because of accidental load may be controlled in order that the GSA guidelines recommended DCR value would be within the range.展开更多
This study presents the investigation of the approach which was presented by Thaer M.Saeed Alrudaini to provide the alternate load path to redistribute residual loads and preventing from the potential progressive coll...This study presents the investigation of the approach which was presented by Thaer M.Saeed Alrudaini to provide the alternate load path to redistribute residual loads and preventing from the potential progressive collapse of RC buildings.It was proposed to transfer the residual loads upwards above the failed column of RC buildings by vertical cables hanged at the top to a hat steel braced frame seated on top of the building which in turn redistributes the residual loads to the adjacent columns.In this study a ten-storey regular structural building has been considered to investigate progressive collapse potential.Structural design is based on ACI 318-08 concrete building code for special RC frames and the nonlinear dynamic analysis is carried out using SAP2000 software,following UFC4-023-03 document.Nine independent failure scenarios are adopted in the investigation,including six external removal cases in different floors and three removal cases in the first floor.A new detail is proposed by using barrel and wedge to improve residual forces transfer to the cables after removal of the columns.Simulation results show that progressive collapse of building that resulted from potential failure of columns located in floors can be efficiently resisted by using this method.展开更多
The horizontal stiffness of the isolated layer is reduced substantially by a friction pendulum bearing(FPB)toprotectthe structure from potential damages caused by earthquakes.However,horizontal stiffness is essential ...The horizontal stiffness of the isolated layer is reduced substantially by a friction pendulum bearing(FPB)toprotectthe structure from potential damages caused by earthquakes.However,horizontal stiffness is essential to progressive collapse resistance of structures.This paper presents a simplified model to assess the progressive collapse response of beam-pier substructure isolated by FPB.Progressive collapse resistance by flexural action of the beam and additional resistance owing to the horizontal restraining force was achieved.The influences of the equivalent radius and friction coefficient of the FPB,the applied axial force on the FPB,and span-depth ratio of the beam on the additional resistance were investigated.Simulations were conducted to verify the proposed model.The results show that progressive collapse resistance provided by horizontal restraining can be reduced as large as 46%and 88%during compressive arching action(CAA)and catenary action(CA),respectively.The equivalent radius of the FPB shows limited effect on the progressive collapse response of FPB isolated structures,but friction coefficient and applied axial force,as well as depth ratio of the beam,show significant influences on the additional progressive collapse resistance capacity.Finite element method(FEM)results are in good agreement with the result obtained by the proposed method.展开更多
The paper is a contribution to the technical discussion concerning the collapses of the WTC buildings. It returns to the problem of the dynamics of the collapses;it does not concern the reason why the buildings starte...The paper is a contribution to the technical discussion concerning the collapses of the WTC buildings. It returns to the problem of the dynamics of the collapses;it does not concern the reason why the buildings started collapsing, but investigates the dynamics of the collapse itself. It works with the same assumptions as the official NIST report [1], i.e. that the falling mass hits the motionless mass beneath;the supporting columns loose stability and the mass of the pertinent floor starts to fall together with the falling mass. The aim was to derive the theoretical upper limit of the speed of the collapse, supposing that influence of the columns which resist the fall, is neglected. The differential equation of the fall was obtained using two independent laws of mechanics, with the identical result. Its solution can be found from a very simple explicit formula. The theoretical upper limit acceleration of the fall obtained by such formula is one third of the gravitational acceleration, which is faster than it was observed in the case of the collapses of WTC1 and WTC2. This leads to the conclusion that the mechanism of the collapse must be different from the assumed and the falling mass must not hit the motionless mass bellow it, but rather a mass which had started to fall before the impact of the falling mass occurred.展开更多
Nowadays,with the increasing operational life of ships,the aging effects on their structural behavior need to be investigated precisely.With the corrosive marine environment taken into consideration,one of the importa...Nowadays,with the increasing operational life of ships,the aging effects on their structural behavior need to be investigated precisely.With the corrosive marine environment taken into consideration,one of the important effects of aging that must be studied is thickness degradation.In this paper,with the use of previously proposed equivalent thickness formulations for corroded plates,the progressive collapse analysis software HULLST is enhanced,and then,the effects of different corrosion models of uniform,random,pitting,and tanker pattern types on the ultimate and residual strengths of a floating production,storage,and offloading vessel hull girder are evaluated for the ages of 0 to 25 years.Results reveal that the uniform corrosion and random corrosion models have close outcomes.The value of relative reduction in the ultimate strength of ship hull girder(compared with the intact condition)ranges roughly from 6%for the age of 5 years to 17%for the age of 25 years in the hogging mode.The relative reduction in the ultimate strength ranges from 4%to 16%in the sagging mode.Pitting corrosion and tanker pattern(random)corrosion models lead to higher relative reductions in ultimate strength.The pitting corrosion model leads to a 16%–32%relative reduction in the ultimate strength for the ages of 5–25 years of the ship in either hogging or sagging.The tanker pattern(random)corrosion model leads to a 6%–37%relative reduction in the ultimate strength in the hogging mode and 3%–31%in the sagging mode at ship ages of 5 to 25 years.展开更多
On June 24,2021,a 40-year-old reinforced concrete flat plate structure building in Miami suffered a sudden partial collapse.This study analyzed the overall performance and key components of the collapsed building base...On June 24,2021,a 40-year-old reinforced concrete flat plate structure building in Miami suffered a sudden partial collapse.This study analyzed the overall performance and key components of the collapsed building based on the building design codes(ACI-318 and GB 50010).Punching shear and post-punching performances of typical slabcolumn joints are also studied through the refined finite element analysis.The collapse process was simulated and visualized using a physics engine.By way of these analyses,weak design points of the collapsed building are highlighted.The differences between the reinforcement detailing of the collapsed building and the requirements of the current Chinese code are discussed,together with a comparison of the punching shear and post-punching performances.The simulated collapse procedure and debris distribution are compared with the actual collapse scenes.展开更多
In recent decades, many public buildings, located in seismic-prone residential areas, had to grapple with abnormal loads against which the structures were unguarded. In this piece of research, an ordinary three dimens...In recent decades, many public buildings, located in seismic-prone residential areas, had to grapple with abnormal loads against which the structures were unguarded. In this piece of research, an ordinary three dimensional reinforced concrete building is selected as case study. The building is located in an earthquake-prone region; however, it is designed according to seismic building codes. Yet, it is not shielded against abnormal loads, such as blasts. It is assumed that the building suffers a blast load, due to mechanical/thermal installation failure during or after intense seismic oscillations. These two critical incidents are regarded codependent and compatible. So the researchers developed scenarios and tried to assess different probabilities for each scenario and carried out an analysis to ensure if progressive collapse had set in or not. In the first step, two analysis models were used for each scenario; a non-linear dynamic time history analysis and a blast local dynamic analysis. In the second step, having the structural destructions of the first step in view, a pushdown analysis was carried out to determine the severity of progressive collapse and assess building robustness. Finally, the annual probability of structural collapse under simultaneous earthquake and blast loads was estimated and offered.展开更多
This paper proposes a framework for critical element identification and demolition planning of frame structures.Innovative quantitative indices considering the severity of the ultimate collapse scenario are proposed u...This paper proposes a framework for critical element identification and demolition planning of frame structures.Innovative quantitative indices considering the severity of the ultimate collapse scenario are proposed using reinforcement learning and graph embedding.The action is defined as removing an element,and the state is described by integrating the joint and element features into a comprehensive feature vector for each element.By establishing the policy network,the agent outputs the Q value for each action after observing the state.Through numerical examples,it is confirmed that the trained agent can provide an accurate estimation of the Q values,and handle problems with different action spaces owing to utilization of graph embedding.Besides,different behaviors can be learned by varying hyperparameters in the reward function.By comparing the proposed method and the conventional sensitivity index-based methods,it is demonstrated that the computational cost is considerably reduced because the reinforcement learning model is trained offline.Besides,it is proved that the Q values produced by the reinforcement learning agent can make up for the deficiencies of existing indices,and can be directly used as the quantitative index for the decision-making for determining the most expected collapse scenario,i.e.,the sequence of element removals.展开更多
文摘This paper presents an investigation of the disproportionate collapse of multi-store steel buildings in a natural fire situation due to the progressive failure of their columns.For this purpose,it is intended to evaluate the effects of the redistribution of stress and vertical displacements of columns with the evolution of the temperature addressing,also,the impacts of the localized faults of these structural elements.In addition,another objective of this paper is the development of a practical analysis approach,which is called by successive approximations.As a methodology,advanced computational techniques were developed to predict the structural behavior of the building as the temperature reduces the strength and stiffness of its structural elements.For the parametric study,the overall response of the building was investigated through fire simulations in many columns.The results showed that the phenomenon of redistribution of stresses that occur during the heating period is essentially due to the reduction in the modulus of elasticity of the steel.In addition,the study pointed out that the use of advanced computational techniques through the use of successive approximations technique is an excellent alternative to study the progressive collapse of buildings subject to high temperatures.
文摘As a key supporting equipment for the construction of LNG carriers,the installation platform undertakes the support and guarantee of LNG carrier tank internal construction.This paper takes the secondary shielding installation platform of A-type tank as the object of study,the study firstly considers the semi-rigidity of the nodes and the material nonlinearity based on finite element software,and then the residual structure is calculated using static nonlinear method after single truss,two trusses and three trusses are invalid simultaneously.The research results show that the truss with higher components importance coefficient has greater impact on the residual structure when the truss is invalid;After the 2 trusses of installation platform become invalid completely,the further progressive collapse will not occur;When A1-HJ,A2-HJ and A2-HJ are dismantled at the same time,it will lead to the local progressive damage,which can cause the collapse of large-scale structures.The research findings can support the design and use of the installation platform.
文摘Progressive collapse is a relatively rare event which happens due to unusual loading on a structure that lacks adequate continuity,ductility and indeterminacy which causes local collapse in that structure and then extends it to other structural parts.The US department of defense published UFC4-023-03 regulation regarding the building design against progressive collapse.This regulation,based on the ASCE 7-05 standard,introduces two general approaches to building design against progressive collapse,including direct design and indirect design approaches.In this study,a variety of structural design methods for progressive collapse have been investigated.Moreover,their strengths and weaknesses have been mentioned.In general,the results of this study show that design based on alternative path(AP)method is more economical than other methods.Moreover,application of AP method is much more commonly accepted by researchers and designers.
文摘The vulnerability of reinforced concrete(RC)building systems to progressive collapse has turned out to be a challenging trouble for professional structural engineers so as to prevent total failure on account of nearby damage.The goal of this paper is to enhance the knowledge of such buildings’behavior underneath several scenarios of misplaced columns at different floor stages,and their capacity for progressive collapse.The homes had been analyzed following the guidelines for progressive collapse evaluation and design organized by means of the general services administration guidelines(GSA).The progressive collapse of a ten story structure subjected to a simplest gravity load is taken into consideration and the column has been eliminated at one place and the spread damage is evaluated.The progressive collapse study has been carried out by way of removing the column at a diagnosed crucial locations(at corner,middle and at interior)as in line with GSA guidelines.Static analysis is done using analysis program ETABS.For each case,the consequences were taken in terms of demand capacity ratio(DCR)at critical section,and as a result the structure has been assessed for it’s susceptible to progressive collapse.The availability of shear wall is made on the component wherein collapse occurred and DCR values are mentioned.After imparting the shear wall to the structure,the progressive collapse of the structure because of accidental load may be controlled in order that the GSA guidelines recommended DCR value would be within the range.
文摘This study presents the investigation of the approach which was presented by Thaer M.Saeed Alrudaini to provide the alternate load path to redistribute residual loads and preventing from the potential progressive collapse of RC buildings.It was proposed to transfer the residual loads upwards above the failed column of RC buildings by vertical cables hanged at the top to a hat steel braced frame seated on top of the building which in turn redistributes the residual loads to the adjacent columns.In this study a ten-storey regular structural building has been considered to investigate progressive collapse potential.Structural design is based on ACI 318-08 concrete building code for special RC frames and the nonlinear dynamic analysis is carried out using SAP2000 software,following UFC4-023-03 document.Nine independent failure scenarios are adopted in the investigation,including six external removal cases in different floors and three removal cases in the first floor.A new detail is proposed by using barrel and wedge to improve residual forces transfer to the cables after removal of the columns.Simulation results show that progressive collapse of building that resulted from potential failure of columns located in floors can be efficiently resisted by using this method.
基金This research was supported by the National Key Research and Development Program of China(No.2017YFC0703603).
文摘The horizontal stiffness of the isolated layer is reduced substantially by a friction pendulum bearing(FPB)toprotectthe structure from potential damages caused by earthquakes.However,horizontal stiffness is essential to progressive collapse resistance of structures.This paper presents a simplified model to assess the progressive collapse response of beam-pier substructure isolated by FPB.Progressive collapse resistance by flexural action of the beam and additional resistance owing to the horizontal restraining force was achieved.The influences of the equivalent radius and friction coefficient of the FPB,the applied axial force on the FPB,and span-depth ratio of the beam on the additional resistance were investigated.Simulations were conducted to verify the proposed model.The results show that progressive collapse resistance provided by horizontal restraining can be reduced as large as 46%and 88%during compressive arching action(CAA)and catenary action(CA),respectively.The equivalent radius of the FPB shows limited effect on the progressive collapse response of FPB isolated structures,but friction coefficient and applied axial force,as well as depth ratio of the beam,show significant influences on the additional progressive collapse resistance capacity.Finite element method(FEM)results are in good agreement with the result obtained by the proposed method.
基金supported from the project of Ministry of Educa-tion,Youth and Sports of the Czech Republic AdMaS UP(Advanced Materials,Structures and Technologies),National Sustainability Programme I,LO1408.
文摘The paper is a contribution to the technical discussion concerning the collapses of the WTC buildings. It returns to the problem of the dynamics of the collapses;it does not concern the reason why the buildings started collapsing, but investigates the dynamics of the collapse itself. It works with the same assumptions as the official NIST report [1], i.e. that the falling mass hits the motionless mass beneath;the supporting columns loose stability and the mass of the pertinent floor starts to fall together with the falling mass. The aim was to derive the theoretical upper limit of the speed of the collapse, supposing that influence of the columns which resist the fall, is neglected. The differential equation of the fall was obtained using two independent laws of mechanics, with the identical result. Its solution can be found from a very simple explicit formula. The theoretical upper limit acceleration of the fall obtained by such formula is one third of the gravitational acceleration, which is faster than it was observed in the case of the collapses of WTC1 and WTC2. This leads to the conclusion that the mechanism of the collapse must be different from the assumed and the falling mass must not hit the motionless mass bellow it, but rather a mass which had started to fall before the impact of the falling mass occurred.
文摘Nowadays,with the increasing operational life of ships,the aging effects on their structural behavior need to be investigated precisely.With the corrosive marine environment taken into consideration,one of the important effects of aging that must be studied is thickness degradation.In this paper,with the use of previously proposed equivalent thickness formulations for corroded plates,the progressive collapse analysis software HULLST is enhanced,and then,the effects of different corrosion models of uniform,random,pitting,and tanker pattern types on the ultimate and residual strengths of a floating production,storage,and offloading vessel hull girder are evaluated for the ages of 0 to 25 years.Results reveal that the uniform corrosion and random corrosion models have close outcomes.The value of relative reduction in the ultimate strength of ship hull girder(compared with the intact condition)ranges roughly from 6%for the age of 5 years to 17%for the age of 25 years in the hogging mode.The relative reduction in the ultimate strength ranges from 4%to 16%in the sagging mode.Pitting corrosion and tanker pattern(random)corrosion models lead to higher relative reductions in ultimate strength.The pitting corrosion model leads to a 16%–32%relative reduction in the ultimate strength for the ages of 5–25 years of the ship in either hogging or sagging.The tanker pattern(random)corrosion model leads to a 6%–37%relative reduction in the ultimate strength in the hogging mode and 3%–31%in the sagging mode at ship ages of 5 to 25 years.
基金the financial support received from The National Key R&D Program(No.2019YFE0112800)the National Natural Science Foundation of China(Grant No.51778341)the Australian Research Council through an ARC Discovery Project(No.DP150100606).
文摘On June 24,2021,a 40-year-old reinforced concrete flat plate structure building in Miami suffered a sudden partial collapse.This study analyzed the overall performance and key components of the collapsed building based on the building design codes(ACI-318 and GB 50010).Punching shear and post-punching performances of typical slabcolumn joints are also studied through the refined finite element analysis.The collapse process was simulated and visualized using a physics engine.By way of these analyses,weak design points of the collapsed building are highlighted.The differences between the reinforcement detailing of the collapsed building and the requirements of the current Chinese code are discussed,together with a comparison of the punching shear and post-punching performances.The simulated collapse procedure and debris distribution are compared with the actual collapse scenes.
文摘In recent decades, many public buildings, located in seismic-prone residential areas, had to grapple with abnormal loads against which the structures were unguarded. In this piece of research, an ordinary three dimensional reinforced concrete building is selected as case study. The building is located in an earthquake-prone region; however, it is designed according to seismic building codes. Yet, it is not shielded against abnormal loads, such as blasts. It is assumed that the building suffers a blast load, due to mechanical/thermal installation failure during or after intense seismic oscillations. These two critical incidents are regarded codependent and compatible. So the researchers developed scenarios and tried to assess different probabilities for each scenario and carried out an analysis to ensure if progressive collapse had set in or not. In the first step, two analysis models were used for each scenario; a non-linear dynamic time history analysis and a blast local dynamic analysis. In the second step, having the structural destructions of the first step in view, a pushdown analysis was carried out to determine the severity of progressive collapse and assess building robustness. Finally, the annual probability of structural collapse under simultaneous earthquake and blast loads was estimated and offered.
基金The authors gratefully acknowledge the financial support provided by the China Scholarship Council(CSC)during a visit of Shaojun Zhu to Kyoto University(No.201906260152)The second author acknowledges the support of JSPS KAKENHI(Grant No.JP20H04467)The third author acknowledges the support of Grant-in-Aid for Young Scientists(Start-up)(Grant No.JP21K20461).
文摘This paper proposes a framework for critical element identification and demolition planning of frame structures.Innovative quantitative indices considering the severity of the ultimate collapse scenario are proposed using reinforcement learning and graph embedding.The action is defined as removing an element,and the state is described by integrating the joint and element features into a comprehensive feature vector for each element.By establishing the policy network,the agent outputs the Q value for each action after observing the state.Through numerical examples,it is confirmed that the trained agent can provide an accurate estimation of the Q values,and handle problems with different action spaces owing to utilization of graph embedding.Besides,different behaviors can be learned by varying hyperparameters in the reward function.By comparing the proposed method and the conventional sensitivity index-based methods,it is demonstrated that the computational cost is considerably reduced because the reinforcement learning model is trained offline.Besides,it is proved that the Q values produced by the reinforcement learning agent can make up for the deficiencies of existing indices,and can be directly used as the quantitative index for the decision-making for determining the most expected collapse scenario,i.e.,the sequence of element removals.