Establishment of an in vitro Tissue Culture and Rapid Propagation System using Lonicera hypoglauca and Content Assessment of Total Flavonoids and Chlorogenic Acid

Lonicera hypoglauca is a traditional Chinese medicinal plant.In this study,the tender young leaves of L.hypoglauca were used for the first time as the explants to establish a rapid in vitro propagation and regeneration system.The results revealed that the optimal time for disinfection of the explants was 8 min and the optimal medium for callus induction was MS+2,4-D 4.0 mg·L^(-1)+sucrose 30 g·L^(-1),with an average callus induction rate of 86.67%.The optimal medium to induce differentiation of callus to bud was MS+6-BA 1.0 mg·L^(-1)+NAA 0.10 mg·L^(-1)+sucrose 30 g·L^(-1),with an average germination rate of 83.33%.The optimal medium to induce multiplication was MS+6-BA 1.5 mg·L^(-1)+NAA 0.05 mg·L^(-1)+sucrose 30 g·L^(-1),with a multiplication coefficient of 5.42.The optimal medium for root induction was 1/2 MS+NAA 0.15 mg·L^(-1)+activated carbon 0.3 g·L^(-1)+sucrose 15 g·L^(-1),with an average rooting rate of 91.11%.The survival rate of tissue-cultured seedlings in nutrient soil cultivation medium was as high as 100%.The total flavonoid content and chlorogenic acid content in the explant,callus tissue and regenerated plant were 1.83%,2.27%,1.33%and 2.77%,1.83%,1.74%respectively.This study provides novel insights into the rapid propagation and mass production of L.hypoglauca seedlings at an industrial scale and that it exhibits important application value and future prospects.

Study of Turing patterns in a SI reaction-diffusion propagation system based on network and non-network environments

The study of rumor propagation dynamics is of great significance to reduce.false news and ensure the authenticity of news information.In this paper,a SI reaction-diffusion rumor propagation model with nonlinear saturation incidence is studied.First,through stability analysis,we obtain the conditions for the existence and local stability of the positive equilibrium point.By selecting suitable variable as the control parameter,the critical value of Turing bifurcation and the existence theorem of Turing bifurcation are obtained.Then,using the above theorem and multi-scale standard analysis,the expression of amplitude equation around Turing bifurcation point is obtained.By analyzing the amplitude equation,different types of Turing pattern are divided such as uniform steady-state mode,hexagonal mode,stripe mode and mixed structure mode.Further,in the numerical simulation part,by observing different patterns corresponding to different values of control variable,the correctness of the theory is verified.Finally,the effects of different network structures on patterns are investigated.The results show that there are significant differences in the distribution of users on different network structures.

Radio Propagation and Wireless Coverage of LSAA-Based 5G Millimeter-Wave Mobile Communication Systems

Millimeter-wave(mm Wave) communications will be used in fifth-generation(5G) mobile communication systems, but they experience severe path loss and have high sensitivity to physical objects, leading to smaller cell radii and complicated network architectures. A coverage extension scheme using large-scale antenna arrays(LSAAs) has been suggested and theoretically proven to be cost-efficient in combination with ultradense small cell networks. To analyze and optimize the LSAA-based network deployments, a comprehensive survey of recent advances in statistical mmWave channel modeling is first presented in terms of channel parameter estimation, large-scale path loss models, and small-scale cluster models. Next, the measurement and modeling results at two 5G candidate mmWave bands(e.g., 28 GHz and 39 GHz) are reviewed and compared in several outdoor scenarios of interest, where the propagation characteristics make crucial contributions to wireless network designs. Finally, the coverage behaviors of systems employing a large number of antenna arrays are discussed, as well as some implications on future mmWave cellular network designs.

A method of searching fault propagation paths in mechatronic systems based on MPPS model

In view of the structure and action behavior of mechatronic systems,a method of searching fault propagation paths called maximum-probability path search(MPPS)is proposed,aiming to determine all possible failure propagation paths with their lengths if faults occur.First,the physical structure system,function behavior,and complex network theory are integrated to define a system structural-action network(SSAN).Second,based on the concept of SSAN,two properties of nodes and edges,i.e.,the topological property and reliability property,are combined to define the failure propagation property.Third,the proposed MPPS model provides all fault propagation paths and possible failure rates of nodes on these paths.Finally,numerical experiments have been implemented to show the accuracy and advancement compared with the methods of Function Space Iteration(FSI)and the algorithm of Ant Colony Optimization(ACO).

An Integrated Approach to Oscillation Propagation Identification and Source Locating in Process Multi-loop Systems

An integrated method for identifying the propagation of multi-loop process oscillations and their source location is proposed in this paper. Oscillatory process loop variables are automatically selected based on the component-related ratio index and a mixing matrix, both of which are obtained in data preprocessing by spectral independent component analysis. The complex causality among oscillatory process variables is then revealed by Granger causality test and is visualized in the form of causality diagram. The simplification of causal connectivity in the diagram is performed according to the understanding of process knowledge and the final simplest causality diagram, which represents the main oscillation propagation paths, is achieved by the automated cutting-off thresh-old search, with which less significant causality pathways are filtered out. The source of the oscillation disturbance can be identified intuitively through the final causality diagram. Both simulated and real plant data tests are presented to demonstrate the effectiveness and feasibility of the proposed method.

Investigation on global positioning system signal scattering and propagation over the rough sea surface

This paper is devoted to the study of polarization properties, scattering properties and propagation properties of global positioning system （GPS） scattering signal over the rough sea surface. To investigate the polarization and the scattering properties, the scattering field and the bistatic scattering coefficient of modified Kirchhoff approximation using the tapered incident wave is derived in detail. In modeling the propagation properties of the GPS scattering signal in the evaporation duct, the initial field of parabolic equation traditionally computed by the antenna pattern using fast Fourier transform （FFT） is replaced by the GPS scattering field. And the propagation properties of the GPS scattering signal in the evaporation duct with different evaporation duct heights and elevation angles of GPS are discussed by the improved discrete mixed Fourier transform taking into account the sea surface roughness.

Influence of Doppler broadening and spontaneously generated coherence on propagation effect in a quasi lambda-type four-level system

In this paper we study influences of Doppler broadening, spontaneously generated coherence, and other system parameters on propagation effect in a quasi lambda-type four-level atomic system. It is shown that when the Doppler broadening is present, generally speaking, the values of gain and intensity of lasing without inversion （i.e. the probe field） in the co-propagating probe and driving fields case are much larger than those in the counter-propagating case; considerably larger gain and intensity of lasing without inversion than those without the Doppler broadening can be obtained by choosing appropriate values of the Doppler broadening width and spontaneously generated coherence strength. The gain and intensity of lasing without inversion increase with the increase of spontaneously generated coherence strength; when spontaneously generated coherence is present, much larger gain and intensity of lasing without inversion than those in the case without spontaneously generated coherence can be obtained. Choosing suitable values of the probe detuning, Rabi frequencies of the driving and pump fields at the entrance of the medium also can remarkably enhance the gain and intensity of lasing without inversion.

Group-Based Successive Interference Cancellation for Multi-Antenna NOMA System with Error Propagation

Non-orthogonal multiple access(NOMA)is viewed as a key technique to improve the spectrum efficiency and solve the issue of massive connectivity.However,for power domain NOMA,the required overall transmit power should be increased rapidly with the increasing number of users in order to ensure that the signal-to-interference-plus-noise ratio reaches a predefined threshold.In addition,since the successive interference cancellation(SIC)is adopted,the error propagation would become more serious as the order of SIC increases.Aiming at minimizing the total transmit power and satisfying each user’s service requirement,this paper proposes a novel framework with group-based SIC for the deep integration between power domain NOMA and multi-antenna technology.Based on the proposed framework,a joint optimization of power control and equalizer design is investigated to minimize transmit power consumption for uplink multi-antenna NOMA system with error propagations.Based on the relationship between the equalizer and the transmit power coefficients,the original problem is transformed to a transmit power optimization problem,which is further addressed by a parallel iteration algorithm.It is shown by simulations that,in terms of the total power consumption,the proposed scheme outperforms the conventional OMA and the existing cluster-based NOMA schemes.

Scattering and propagation of terahertz pulses in random soot aggregate systems

Scattering and propagation of terahertz pulses in random soot aggregate systems are studied by using the generalized multi-particle Mie-solution （GMM） and the pulse propagation theory. Soot aggregates are obtained by the diffusion-limited aggregation （DLA） model. For a soot aggregate in soot aggregate systems, scattering characteristics are analyzed by using the GMM. Scattering intensities versus scattering angles are given. The effects of different positions of the aggregate on the scattering intensities, scattering cross sections, extinction cross sections, and absorption cross sections are computed and compared. Based on pulse propagation in random media, the transmission of terahertz pulses in random soot aggregate systems is determined by the two-frequency mutual coherence function. Numerical simulations and analysis are given for terahertz pulses （0.7956 THz）.

STUDY ON GIS BASED PREDICTION SYSTEM FOR RADIO WAVE PROPAGATION IN URBAN REGION

In this letter, an integrated application of the prediction for radio wave propagation with the Geographic Information System (GIS) is presented and a real prediction system based on GIS is implemented.

Mathematical Formulations of Signal Propagation in Ultra-Wideband Transceiver Systems under a UWB Channel Environment with an Extension of Frequency Offset Correction

This paper analyzes mathematically the crucial aspects of signal processing in a Multi-Band (MB) Orthogonal Frequency Division Multiplexing (OFDM) based system considering Ultra-Wideband (UWB) channel environment. In the process of analysis, it emphasizes the significant features of UWB receiver design in comparison with ‘conventional’ narrow-band system. The analysis shows that the high dispersive nature of a frequency selective UWB channel effects the design of different signal processing blocks like pre-select filter, low noise amplifier (LNA) and analog-to-digital (A/D) converter in the receiver front end. The characteristic functions of each of these stages are now dominated by the channel characteristics and it needs to be modified accordingly. This analysis is extended further with the study of frequency offset error and its correction. The unbiased Cramer Rao Lower Bound (CRLB) of estimation error is calculated and supported by computer simulation. The performance of an MB-OFDM system with frequency offset correction in terms of Bit-Error-Rate (BER) is also reported.

Construction of Technology System on Development and Repropagation in Vitro of Several Cultivars in Pear

It is the most available way to obtain self-rooted seedlings by tissue culture,which could breed de-virus seedlings with uniform traits and contribute to improve seedling quality.To construct a complete and efficient technology system,this test used stem with buds of 16 cultivars and super lines including Yali,Jingbaili,03-04-034,03-08-080 and so on as materials to study the best way for explant sampling time and position,sterilization time using HgCl 2 and hormone concentrations.The result indicated that the optimum technology system was that the middle parts of longest shoots before 20 d after full-blossom were sterilized for 8 min by 0.1%HgCl 2 and inoculated on the development medium MS+6-BA 0.5 mg/L+IBA 0.2 mg/L+saccharose 3%+agar 0.6%(pH=5.8),and then trans-inoculated into propagation medium MS+6-BA 1.0 mg/L+IBA 0.3 mg/L+saccharose 3%+agar 0.6%(pH=5.8).

Rapid Propagation of Virus-free Sugarcane Plantlets via Temporary Immersion Bioreactor System

By employing temporary immersion bioreactor system(TIBs),we studied virus-free culture of seedlings from sugarcane varieties ROC16 and ROC22,from medium recipe,inoculation amount,sucrose concentration,and variety difference. The results showed,using this method,that proliferation rate of ROC16 improved by 40 times,per flask generated about 800 plantlets; of ROC22 improved by 30 times,per flask generated about 400-600 plantlets. The results provided basis for using TIBs in rapid propagation of plantlets via tissue culture.

System Recovery-Aware Virus Propagation Model and Its Steady-State Analysis

Network structures and human behaviors are considered as two important factors in virus defense currently. However, due to ignorance of network security, normal users usually take simple activities, such as reinstalling computer system, or using the computer recovery system to clear virus. How system recovery influences virus spreading is not taken into consideration currently. In this paper, a new virus propagation model considering the system recovery is proposed first, and then in its steady-state analysis, the virus propagation steady time and steady states are deduced. Experiment results show that models considering system recovery can effectively restrain virus propagation. Furthermore, algorithm with system recovery in BA scale-free network is proposed. Simulation result turns out that target immunization strategy with system recovery works better than traditional ones in BA network.

A Back Propagation-Type Neural Network Architecture for Solving the Complete n ×n Nonlinear Algebraic System of Equations

The objective of this research is the presentation of a neural network capable of solving complete nonlinear algebraic systems of n equations with n unknowns. The proposed neural solver uses the classical back propagation algorithm with the identity function as the output function, and supports the feature of the adaptive learning rate for the neurons of the second hidden layer. The paper presents the fundamental theory associated with this approach as well as a set of experimental results that evaluate the performance and accuracy of the proposed method against other methods found in the literature.

Mechanism of internal thermal runaway propagation in blade batteries

Blade batteries are extensively used in electric vehicles,but unavoidable thermal runaway is an inherent threat to their safe use.This study experimentally investigated the mechanism underlying thermal runaway propagation within a blade battery by using a nail to trigger thermal runaway and thermocouples to track its propagation inside a cell.The results showed that the internal thermal runaway could propagate for up to 272 s,which is comparable to that of a traditional battery module.The velocity of the thermal runaway propagation fluctuated between 1 and 8 mm s^(-1),depending on both the electrolyte content and high-temperature gas diffusion.In the early stages of thermal runaway,the electrolyte participated in the reaction,which intensified the thermal runaway and accelerated its propagation.As the battery temperature increased,the electrolyte evaporated,which attenuated the acceleration effect.Gas diffusion affected thermal runaway propagation through both heat transfer and mass transfer.The experimental results indicated that gas diffusion accelerated the velocity of thermal runaway propagation by 36.84%.We used a 1D mathematical model and confirmed that convective heat transfer induced by gas diffusion increased the velocity of thermal runaway propagation by 5.46%-17.06%.Finally,the temperature rate curve was analyzed,and a three-stage mechanism for internal thermal runaway propagation was proposed.In Stage I,convective heat transfer from electrolyte evaporation locally increased the temperature to 100℃.In Stage II,solid heat transfer locally increases the temperature to trigger thermal runaway.In StageⅢ,thermal runaway sharply increases the local temperature.The proposed mechanism sheds light on the internal thermal runaway propagation of blade batteries and offers valuable insights into safety considerations for future design.

Heat transfer enhanced inorganic phase change material compositing carbon nanotubes for battery thermal management and thermal runaway propagation mitigation

Developing technologies that can be applied simultaneously in battery thermal management(BTM)and thermal runaway(TR)mitigation is significant to improving the safety of lithium-ion battery systems.Inorganic phase change material(PCM)with nonflammability has the potential to achieve this dual function.This study proposed an encapsulated inorganic phase change material(EPCM)with a heat transfer enhancement for battery systems,where Na_(2)HPO_(4)·12H_(2)O was used as the core PCM encapsulated by silica and the additive of carbon nanotube(CNT)was applied to enhance the thermal conductivity.The microstructure and thermal properties of the EPCM/CNT were analyzed by a series of characterization tests.Two different incorporating methods of CNT were compared and the proper CNT adding amount was also studied.After preparation,the battery thermal management performance and TR propagation mitigation effects of EPCM/CNT were further investigated on the battery modules.The experimental results of thermal management tests showed that EPCM/CNT not only slowed down the temperature rising of the module but also improved the temperature uniformity during normal operation.The peak battery temperature decreased from 76℃to 61.2℃at 2 C discharge rate and the temperature difference was controlled below 3℃.Moreover,the results of TR propagation tests demonstrated that nonflammable EPCM/CNT with good heat absorption could work as a TR barrier,which exhibited effective mitigation on TR and TR propagation.The trigger time of three cells was successfully delayed by 129,474 and 551 s,respectively and the propagation intervals were greatly extended as well.

Numerical modeling of fracture propagation of supercritical CO_(2)compound fracturing

The exploitation of shale gas is promising due to depletion of the conventional energy and intensification of the greenhouse effect.In this paper,we proposed a heat-fluid-solid coupling damage model of supercritical CO_(2)(SC-CO_(2))compound fracturing which is expected to be an efficient and environmentally friendly way to develop shale gas.The coupling model is solved by the finite element method,and the results are in good agreement with the analytical solutions and fracturing experiments.Based on this model,the fracture propagation characteristics at the two stages of compound fracturing are studied and the influence of pressurization rate,in situ stress,bedding angle,and other factors are considered.The results show that at the SC-CO_(2)fracturing stage,a lower pressurization rate is conducive to formation of the branches around main fractures,while a higher pressurization rate inhibits formation of the branches around main fractures and promotes formation of the main fractures.Both bedding and in situ stress play a dominant role in the fracture propagation.When the in situ stress ratio(δ_(x)/δ_(y))is 1,the presence of bedding can reduce the initiation pressure and failure pressure.Nevertheless,it will cause the fracture to propagate along the bedding direction,reducing the fracture complexity.In rocks without bedding,hydraulic fracturing has the lengthening and widening effects for SC-CO_(2)induced fracture.In shale,fractures induced at the hydraulic fracturing stage are more likely to be dominated by in situ stresses and have a shorter reorientation radius.Therefore,fracture branches propagating along the maximum principal stress direction may be generated around the main fractures induced by SC-CO_(2)at the hydraulic fracturing stage.When the branches converge with the main fractures,fracture zones are easily formed,and thus the fracture complexity and damage area can be significantly increased.The results are instructive for the design and application of SC-CO_(2)compound fracturing.

Impact Analysis of Microscopic Defect Types on the Macroscopic Crack Propagation in Sintered Silver Nanoparticles

Sintered silver nanoparticles(AgNPs)arewidely used in high-power electronics due to their exceptional properties.However,the material reliability is significantly affected by various microscopic defects.In this work,the three primary micro-defect types at potential stress concentrations in sintered AgNPs are identified,categorized,and quantified.Molecular dynamics(MD)simulations are employed to observe the failure evolution of different microscopic defects.The dominant mechanisms responsible for this evolution are dislocation nucleation and dislocation motion.At the same time,this paper clarifies the quantitative relationship between the tensile strain amount and the failure mechanism transitions of the three defect types by defining key strain points.The impact of defect types on the failure process is also discussed.Furthermore,traction-separation curves extracted from microscopic defect evolutions serve as a bridge to connect the macro-scale model.The validity of the crack propagation model is confirmed through tensile tests.Finally,we thoroughly analyze how micro-defect types influence macro-crack propagation and attempt to find supporting evidence from the MD model.Our findings provide a multi-perspective reference for the reliability analysis of sintered AgNPs.

Propagation of Surface Modes in a Warm Non-Magnetized Quantum Plasma System

The propagation of surface modes in warm non-magnetized quantum plasma is investigated. The surface modes are assumed to propagate on the plane between vacuum and warm quantum plasma. The quantum hydrodynamic model including quantum diffraction effect （the Bohm potential） and quantum statistical pressure is used to derive a new dispersion relation of surface modes. The new dispersion relation of surface modes is analyzed in some special interesting cases. It is shown that the dispersion relation can be reduced to the earlier results in some special cases. The results indicate that the quantum effects can facilitate the propagation of surface modes in such a semi-bounded plasma system. This work is helpful to understand the physical characteristics of the surface modes and the bounded quantum plasma.