Optimization of nanofiber scaffold properties towards nerve guidance channel design

Nerve guidance channels are limited by lack of topographical guidance：Treatment of sizeable nerve gaps remains problematic following peripheral nerve injury.Functional outcomes are good when neurorrhaphy,or direct end-to-end suture repair,is possible.The problem arises when there is significant segmental loss,which can occur following trauma as well as oncological procedures.

OPTIMIZATION ON THE FORMATION AND PROPERTIES OF HIGH-ALKALI CLINKER

The effects of CaSO4 additive and burning temperature on the formation and properties of high-alkali clinker as well as their optimal control range were studied by means of chemical analysis, physical examination , XRD, DTA and EPMA. The results show that a proper addition of CaSO4 may convert alkalis to R2S04, reduce melt viscosity, considerably improve the forming environment of alite. during burning. hence the setting and hardening of clinker develop normally. If CaSO4 were too much , however , that excess SO3 with Al2O3 would dissolve into C2S to hinder C3S forming and produce K2SO4 ·CaSO4 ·H2O during hydratlon , to lead to quick setting of the paste. The optimal CaSO4 content expressed as SO3/R2O mole ratio in clinker is 0. 6-1. 0, A high temperature can decrease the riscosity and increase the rate of forming C3S nuclei , so not only helping overcome the harm of alkali but al,so supplementing imperfection of sulpfiate. It is better to burn a high alkali clinker with CaSO4 addition abore 1400℃.

Intrinsic mechanism and multiphysics analysis of electromagnetic wave absorbing materials: New horizons and breakthrough

Electromagnetic absorbers(EMA) have driven the development of Electromagnetic(EM) technology and advanced EM devices. Utilizing the EM energy conversion of EM absorbers to design various devices is attractive and promising, especially in personal protection and healthcare. In this review article, the simulation and numerical analysis of EM materials are reviewed, from numerical analysis of dielectric parameters, simulation of wave absorbing performance, electromagnetic performance improvement, and structural construction optimization. For the EM response mechanism, radiation-dependent relaxation and charge transport energy transitions are dissected. For the EM calculation section, two leading roles are highlighted, including the purposeful design of EM and the provision of theoretical guidance for optimizing electromagnetic absorption performance. In addition, this work points out the current problems and potential opportunities in the numerical simulation of absorbing materials, points out the new development direction, and proposes prospects.

Optical property of an antireflection coating fabricated by an optimal spin-coating method with a pH-modified SiO2 nanoparticle solution

An antireflection （AR） coating is fabricated by applying an optimal spin-coating method and a pH-modified SiO2 nanoparticle solution on a cover glass. Because the pH value of the solution will affect the aggregation and dispersion of the SiO2 particles, the transmittance of the AR-treated cover glass will be enhanced under optimal fabricated conditions. The experimental results show that an AR coating fabricated by an SiO2 nano- particle solution of pH 11 enhances the transmittance approximately by 3% and 5% under normal and oblique incident conditions, respectively. Furthermore, the AR-treated cover glass exhibits hydrophobicity and shows a 65% enhancement at a contact angle to bare glass.

STATISTICAL INFERENCE PROCEDURE FOR A BIVARIATE EXPONENTIAL DISTRIBUTION

In this paper, on the basis of the data of both components and series system experiments,we give some statistical inference procedures for the three parameters of a bivariate exponential distribution, and discuss their properties.