Based on the detailed computer simulation of the indentation testing on the thin-film systems, the present paper explores the detailed procedure of determining elastic properties (elastic modulusE^(f) and Poisson rati...Based on the detailed computer simulation of the indentation testing on the thin-film systems, the present paper explores the detailed procedure of determining elastic properties (elastic modulusE^(f) and Poisson ratio v(f)) and creep parameters (CCREEP^(f) and nCREEP^(f)) for a simple Norton law (ε=CCREEP^(f)σ^n CREE^(f), where e is creep strain rate, and a is the stress) material for a thin film coated on a creep substrate, whose elastic properties(E^(s) and v^(s)) and creep properties (CCREEP^(s) and nCREEP^(s)) of the substrate are known, from indentation elastic and creep testing,respectively. The influences of the thickness of the thin-film and the size of the indenter on the indentation behavior have been discussed. It is shown that the boundary between the thin film and the substrate has great influence on the indentation creep behavior. The relative sizes of indentation systems are chosen so that the behavior of the indentation on the film is influenced by the substrate. The two elastic parameters E^(f) and v^(f) of the film are coupled on the influence of the elastic behavior of indentation. With the two different size indenters, the two elastic parameters E^(f) and v^(f) of the film can be uniquely determined by the indentation experimental slopes of depth to applied net section stress results. The procedure of determining of the two Norton law parameters CCREEP^(f) and nCREEP^(f) includes the following steps by the steady indentation rate d. The first step to calculate the creep indentation rate on certain loads of the two different sizes of indenters on a set of assumed values of CCREEP^(f) and nCREEP^(f)Then to build relationship between the creep indentation rate and the assumed CCREEP^(f) and nCREEP^(f) With the experimental creep indentation rate to intersect two sets of which have the same values of d. The last step is to build the CCREEP^(f) and nCREEP^(f)curves from the intersection points for the two indenters. These two curves CCREEP^(f) and nCREEP^(f)展开更多
According to the theory of phononic crystals, the hydraulic pipeline is designed to be a periodic structure composed of steel pipes and hoses to suppress the vibration of the hydraulic system with band gaps. We presen...According to the theory of phononic crystals, the hydraulic pipeline is designed to be a periodic structure composed of steel pipes and hoses to suppress the vibration of the hydraulic system with band gaps. We present theoretical and experimental investigations into the flexural vibration transfer properties of a high-pressure periodic pipe with the force on the inner pipe wall by oii pressure taken into consideration. The results show that the vibration attenuation of periodic pipe decreases along with the elevation of working pressure for the hydraulic system, and the band gaps in low frequency ranges move towards high frequency ranges. The periodic pipe has good vibration attenuation performance in the frequency range below 1000 Hz and the vibration of the hydraulic system is effectively suppressed. A11 the results are validated by experiment. The experimental results show a good agreement with the numerical calculations, thus the flexural vibration transfer properties of the high- pressure periodic pipe can be precisely calculated by taking the fluid structure interaction between the pipe and oil into consideration. This study provides an effective way for the vibration control of the hydraulic system.展开更多
Two quinary high-entropy alloys (HEAs) with equiatomic concentrations formed by doping either Cu or A1 elements into the quaternary NiFeCoCr alloy are produced by arc melting and spray casting techniques. Their entr...Two quinary high-entropy alloys (HEAs) with equiatomic concentrations formed by doping either Cu or A1 elements into the quaternary NiFeCoCr alloy are produced by arc melting and spray casting techniques. Their entropy of fusion, thermal expansion coefficient and thermal diffusivity are experimentally investigated with differential scanning cMorimetry, dilatometry and laser flash methods. The NiFeCoCrCu HEAs contain a face- centered cubic high-entropy phase plus a minor interdendritic (Cu) phase and display a lower entropy of fasion and the Vickers hardness. The NiFeCoCrAl HEAs consist of two body-centered cubie high-entropy phases with coarse dendritic structures and show higher entropy of fusion and the Vickers hardness. Both the thermal expansion coefficient and the thermal diffusivity of the former Cu-doped alloy are signitieantly larger than those of the latter At-doped M1oy. Although the temperature dependence of thermal diffusivity is similar for both HEAs, it is peculiar that the thermal expansion curve of the NiFeCoCrAl alloy exhibits an inflexion at temperatures of 860-912 K.展开更多
We conducted a series of experimental studies on the metallurgical properties of N-lump and F-lump ores used in Baosteel’s blast furnace, including thermal cracking, low-temperature reduction pulverization, reducibil...We conducted a series of experimental studies on the metallurgical properties of N-lump and F-lump ores used in Baosteel’s blast furnace, including thermal cracking, low-temperature reduction pulverization, reducibility, and droplet properties.The results show that the thermal burst properties of N-lump ore are better than those of F-lump ore.The low-temperature reduction degradation index(RDI) pulverization of the charge is the best when the ratios of N-lump ore and F-lump ore account for 35% each.The reduction performance of the charge is improved when F-lump and N-lump ores are mixed with sinter.In the softening-melting performance experiment, when the proportion of N-lump ore is 40%,the characteristic area value(S) as the charge permeability index is the smallest.When F-lump ore is mixed with sinter, its droplet performance improves compared with that of single F-lump ore.The proportion of F-lump ore should not exceed 15%.展开更多
In order to improve the comprehensive utilization of solid waste such as iron tailings and waste glass and so on,mechanical property test of cement tailings mortar mixed waste glass and curing mechanism research were ...In order to improve the comprehensive utilization of solid waste such as iron tailings and waste glass and so on,mechanical property test of cement tailings mortar mixed waste glass and curing mechanism research were conducted in the key materials mechanics lab of Liaoning province.The experimental results show that adding waste glass particles can improve the grain size distribution of tailings.The effect is proportional to the content.The compressive strength of tailings mortar has increased significantly.The fineness modulus of tailings mortar mixture adding waste glass powder was gradually reducing with the increase of the dosage of waste glass powder,but the compressive strength of the mixture has gradually enhanced with the increase of the dosage.Microscopic analysis shows that the waste glass particles in the mortar mainly play a role of coarse aggregate and glass powder after grinding fine below a certain size shows strong volcanic activity,which can act hydration with tailings,at the same time glass powder also,plays a role in fine aggregate filling.Therefore,all of glass particles and glass powder can be used as the additive material for improving and optimizing the mechanical property of tailings mortar.展开更多
The far-field imaging properties of a high index microsphere lens spatially separated from the object are experimentally studied. Our experimental results show that, for a Blu-ray disk whose spacing is 300 nm, the hig...The far-field imaging properties of a high index microsphere lens spatially separated from the object are experimentally studied. Our experimental results show that, for a Blu-ray disk whose spacing is 300 nm, the high index microsphere lens also can discern the patterns of the object sample when the distance between the lens and the object is up to 5.4 μm. When the distance is increased from 0 to 5.4 μm, for the microsphere lens with a diameter of 24 μm, the lateral magnification increases from 3.5× to 5.5×, while the field of view decreases from 5.1 to 3.0 μm. By varying the distance between the lens and the object, the optical image can be optimized. We also indicate that the far-field imaging capability of a high index microsphere lens is dependent on the electromagnetic field intensityprofile of the photonic nanojet under different positions of the microsphere lens.展开更多
In the bistatic case, theoretical analysis and experimental researches on underwater acoustic scattering properties of some submarine model are made in this paper. When sourcet target and receiver have complicated tri...In the bistatic case, theoretical analysis and experimental researches on underwater acoustic scattering properties of some submarine model are made in this paper. When sourcet target and receiver have complicated triangular configuration, the relationships among target strength, incidence angle and bistatic angle are obtained. The validity of this theory is verified by theoretical calculations and tank experiments. The research results can be directly used in bistatic or multistatic underwater acoustic detection systems.展开更多
OpticallylabeledIM/FSKsignalsaretransmittedover50kmofSMFunderdifferentcompensationschemes.All-optical label swapping based on MZ-SOA and EAM is presented. Transmission followed by label swapping shows a 2dB overall po...OpticallylabeledIM/FSKsignalsaretransmittedover50kmofSMFunderdifferentcompensationschemes.All-optical label swapping based on MZ-SOA and EAM is presented. Transmission followed by label swapping shows a 2dB overall power penalty.展开更多
Research into the fundamental properties of microcapsules and use of the results to develop a wide variety of products in industries such as printing, fast-moving consumer goods, construction, pharmaceuticals, and agr...Research into the fundamental properties of microcapsules and use of the results to develop a wide variety of products in industries such as printing, fast-moving consumer goods, construction, pharmaceuticals, and agrochemicals is a dynamic and ever-progressing field of study. For microcapsules to be effective in providing protection from harsh environments or delivering large payloads, it is essential to have a good understanding of their properties to enable quality control during formulation, storage, and applications. This review aims to outline the commonly used techniques for determining the physicochemical, struc- tural, and mechanical properties of microcapsules, and highlights the interlinked nature of these three areas with respect to the end-use industrial application. This review provides information on techniques that are well supported in the literature, and also examines microcapsule analytical techniques that will become more prevalent as a result of new technological developments or extensions from other areas of study.展开更多
基金the Alexander von Humboldt FOundation. GE would liketo aCknowledge funding from Deutsche Forschungsgemeinschaft (SFB 526: Rheo
文摘Based on the detailed computer simulation of the indentation testing on the thin-film systems, the present paper explores the detailed procedure of determining elastic properties (elastic modulusE^(f) and Poisson ratio v(f)) and creep parameters (CCREEP^(f) and nCREEP^(f)) for a simple Norton law (ε=CCREEP^(f)σ^n CREE^(f), where e is creep strain rate, and a is the stress) material for a thin film coated on a creep substrate, whose elastic properties(E^(s) and v^(s)) and creep properties (CCREEP^(s) and nCREEP^(s)) of the substrate are known, from indentation elastic and creep testing,respectively. The influences of the thickness of the thin-film and the size of the indenter on the indentation behavior have been discussed. It is shown that the boundary between the thin film and the substrate has great influence on the indentation creep behavior. The relative sizes of indentation systems are chosen so that the behavior of the indentation on the film is influenced by the substrate. The two elastic parameters E^(f) and v^(f) of the film are coupled on the influence of the elastic behavior of indentation. With the two different size indenters, the two elastic parameters E^(f) and v^(f) of the film can be uniquely determined by the indentation experimental slopes of depth to applied net section stress results. The procedure of determining of the two Norton law parameters CCREEP^(f) and nCREEP^(f) includes the following steps by the steady indentation rate d. The first step to calculate the creep indentation rate on certain loads of the two different sizes of indenters on a set of assumed values of CCREEP^(f) and nCREEP^(f)Then to build relationship between the creep indentation rate and the assumed CCREEP^(f) and nCREEP^(f) With the experimental creep indentation rate to intersect two sets of which have the same values of d. The last step is to build the CCREEP^(f) and nCREEP^(f)curves from the intersection points for the two indenters. These two curves CCREEP^(f) and nCREEP^(f)
文摘According to the theory of phononic crystals, the hydraulic pipeline is designed to be a periodic structure composed of steel pipes and hoses to suppress the vibration of the hydraulic system with band gaps. We present theoretical and experimental investigations into the flexural vibration transfer properties of a high-pressure periodic pipe with the force on the inner pipe wall by oii pressure taken into consideration. The results show that the vibration attenuation of periodic pipe decreases along with the elevation of working pressure for the hydraulic system, and the band gaps in low frequency ranges move towards high frequency ranges. The periodic pipe has good vibration attenuation performance in the frequency range below 1000 Hz and the vibration of the hydraulic system is effectively suppressed. A11 the results are validated by experiment. The experimental results show a good agreement with the numerical calculations, thus the flexural vibration transfer properties of the high- pressure periodic pipe can be precisely calculated by taking the fluid structure interaction between the pipe and oil into consideration. This study provides an effective way for the vibration control of the hydraulic system.
基金Supported by the National Natural Science Foundation of China under Grant Nos 51571163,51371150,51271150 and 51327901
文摘Two quinary high-entropy alloys (HEAs) with equiatomic concentrations formed by doping either Cu or A1 elements into the quaternary NiFeCoCr alloy are produced by arc melting and spray casting techniques. Their entropy of fusion, thermal expansion coefficient and thermal diffusivity are experimentally investigated with differential scanning cMorimetry, dilatometry and laser flash methods. The NiFeCoCrCu HEAs contain a face- centered cubic high-entropy phase plus a minor interdendritic (Cu) phase and display a lower entropy of fasion and the Vickers hardness. The NiFeCoCrAl HEAs consist of two body-centered cubie high-entropy phases with coarse dendritic structures and show higher entropy of fusion and the Vickers hardness. Both the thermal expansion coefficient and the thermal diffusivity of the former Cu-doped alloy are signitieantly larger than those of the latter At-doped M1oy. Although the temperature dependence of thermal diffusivity is similar for both HEAs, it is peculiar that the thermal expansion curve of the NiFeCoCrAl alloy exhibits an inflexion at temperatures of 860-912 K.
文摘We conducted a series of experimental studies on the metallurgical properties of N-lump and F-lump ores used in Baosteel’s blast furnace, including thermal cracking, low-temperature reduction pulverization, reducibility, and droplet properties.The results show that the thermal burst properties of N-lump ore are better than those of F-lump ore.The low-temperature reduction degradation index(RDI) pulverization of the charge is the best when the ratios of N-lump ore and F-lump ore account for 35% each.The reduction performance of the charge is improved when F-lump and N-lump ores are mixed with sinter.In the softening-melting performance experiment, when the proportion of N-lump ore is 40%,the characteristic area value(S) as the charge permeability index is the smallest.When F-lump ore is mixed with sinter, its droplet performance improves compared with that of single F-lump ore.The proportion of F-lump ore should not exceed 15%.
基金Found by the National Natural Science Foundation of China(Nos.51279109 and 51474050)the Liaoning Education Department Funds(No.201364088)
文摘In order to improve the comprehensive utilization of solid waste such as iron tailings and waste glass and so on,mechanical property test of cement tailings mortar mixed waste glass and curing mechanism research were conducted in the key materials mechanics lab of Liaoning province.The experimental results show that adding waste glass particles can improve the grain size distribution of tailings.The effect is proportional to the content.The compressive strength of tailings mortar has increased significantly.The fineness modulus of tailings mortar mixture adding waste glass powder was gradually reducing with the increase of the dosage of waste glass powder,but the compressive strength of the mixture has gradually enhanced with the increase of the dosage.Microscopic analysis shows that the waste glass particles in the mortar mainly play a role of coarse aggregate and glass powder after grinding fine below a certain size shows strong volcanic activity,which can act hydration with tailings,at the same time glass powder also,plays a role in fine aggregate filling.Therefore,all of glass particles and glass powder can be used as the additive material for improving and optimizing the mechanical property of tailings mortar.
基金financial support for this research from the Doctoral Fund of Ministry of Education of China (No. 20133207110007)the National Natural Science Foundation of China (No. 61475073)
文摘The far-field imaging properties of a high index microsphere lens spatially separated from the object are experimentally studied. Our experimental results show that, for a Blu-ray disk whose spacing is 300 nm, the high index microsphere lens also can discern the patterns of the object sample when the distance between the lens and the object is up to 5.4 μm. When the distance is increased from 0 to 5.4 μm, for the microsphere lens with a diameter of 24 μm, the lateral magnification increases from 3.5× to 5.5×, while the field of view decreases from 5.1 to 3.0 μm. By varying the distance between the lens and the object, the optical image can be optimized. We also indicate that the far-field imaging capability of a high index microsphere lens is dependent on the electromagnetic field intensityprofile of the photonic nanojet under different positions of the microsphere lens.
文摘In the bistatic case, theoretical analysis and experimental researches on underwater acoustic scattering properties of some submarine model are made in this paper. When sourcet target and receiver have complicated triangular configuration, the relationships among target strength, incidence angle and bistatic angle are obtained. The validity of this theory is verified by theoretical calculations and tank experiments. The research results can be directly used in bistatic or multistatic underwater acoustic detection systems.
文摘OpticallylabeledIM/FSKsignalsaretransmittedover50kmofSMFunderdifferentcompensationschemes.All-optical label swapping based on MZ-SOA and EAM is presented. Transmission followed by label swapping shows a 2dB overall power penalty.
文摘Research into the fundamental properties of microcapsules and use of the results to develop a wide variety of products in industries such as printing, fast-moving consumer goods, construction, pharmaceuticals, and agrochemicals is a dynamic and ever-progressing field of study. For microcapsules to be effective in providing protection from harsh environments or delivering large payloads, it is essential to have a good understanding of their properties to enable quality control during formulation, storage, and applications. This review aims to outline the commonly used techniques for determining the physicochemical, struc- tural, and mechanical properties of microcapsules, and highlights the interlinked nature of these three areas with respect to the end-use industrial application. This review provides information on techniques that are well supported in the literature, and also examines microcapsule analytical techniques that will become more prevalent as a result of new technological developments or extensions from other areas of study.