Exploring effects of property variation on fragmentation of metal rings using a simple model

A simple finite element implementation of the Mott model for fragmentation of a thin walled ring has been implemented and used to explore the effect of local variations in fracture strain around the ring.The model has successfully reproduced the fragment size distributions previously reported,which follow a characteristic“Mott distribution”form,providing sufficient(1000)simulations are run.It has been shown that this form is retained even when there are large differences in the random distribution of fracture strains or a different choice of function used to describe the fracture strain scatter.In these cases,the strain rate has a much stronger effect than fracture strain distribution the on the average fragment size and fragment distribution.However,for cases where there are a small number of local defects that strongly reduce the fracture strain at certain locations around the ring,the predicted fragment size distribution develops a bimodal character.This is also the case for large but gradual variations in fracture strain with position around the ring.The results have implications for cases where a small number of large pre-existing defects exist,or processing has led to macrozones in the microstructure.The utility of a simple fast running model to study these cases is discussed.

Sources of variability in laboratory rock test results

Appropriate rock characterization is beneficial in providing a reliable judgment on rock properties which is crucial for the design process of rock engineering applications.However,it can be difficult to obtain consistent mechanical parameters due to substantial variations in rock properties.In this research,uniaxial compression tests on dolerite specimens collected from a gold mine in Western Australia showed substantial scatter in the results.Rock categorization based on the P-wave velocities is as accurate as the thin section analysis,which suggests that they can be used together to gain a more accurate initial understanding of the rock types before any laboratory testing.The quality of specimen preparation and rockemachine interaction greatly affect the test results.For instance,non-parallelness of loading platens can lead to considerable scatter of the testing results,which would be perceived as rock variability.It is suggested that the current testing standards should be modified towards a better control of the loading machine performance and equipment precision.Finally,the possibility of pre-existing microcracks in rock,neither detected by the thin section analysis nor by the ultrasonic measurement,must be examined by computed tomography(CT)scanning as they can affect the test results.This study will enhance our knowledge about the sources of variability in laboratory test results of rock which is essential for obtaining reliable data.

The limit properties of spatial coherence of seismic ground motion

The limit properties of spatial coherence of seismic ground motion are studied based on the differential relation between rotation and translation in elastic theory, the results show that the empirical mathematical model of spatial coherence must satisfy some functional characteristics. It is also indicated that the key problem to estimate rotational power spectrum densities is to obtain precisely the two order derivative of spatial coherence.

A refined design method for precoolers with consideration of multi-parameter variations based on low-dimensional analysis

The precooler is a distinctive component of precooled air-breathing engines but constitutes a challenge to conventional thermal design methods.The latter are based upon assumptions that often reveal to be limited for precooler design.In this paper,a refined design method considering the variations of fluid thermophysical properties,flow area and thermal parameters distortion,was proposed to remediate their limitations.Firstly,the precooler was discretized into a fixed number of sub-microtubes based on a new discretization criterion.Next,in-house one-dimensional(1D)and two-dimensional(2D)segmented models were established for rapid thermal design and precooler rating with non-uniform airflow,respectively.The heat transfer experimental studies of supercritical hydrocarbon fuel were performed to verify the Jackson correlation for precooler design and the in-house models were validated against the reported data from open literature.On this basis,the proposed method was employed for the design analysis of hydrocarbon fuel precoolers for precooled-Turbine Based Combined Cycle(TBCC)engines.The results show that the local performance of precoolers is intrinsically impacted by the aforementioned three variations.In the case study,the local heat transfer performance is drastically affected by coolant flow transition.While the circumferential temperature distortion of airflow is weakened by heat transfer.With consideration of additional parameter variations,this novel method improves design accuracy and shortens the design time.

Effects of physical properties of supercritical water on coarse graining of particle cluster

The coarse graining of particle cluster is of great significance to the study of a fluidized bed. The effects of variations in the physical properties of supercritical water on the coarse graining of particle cluster are investigated in this work. The drag coefficient distributions of the particle cluster are not influenced by the physical properties. However, the physical properties have effects on the values of drag coefficient. The effects of physical properties are weaker in the case of large particle concentrations. Furthermore, the physical properties lead to that the effect of particle cluster wake on the drag of downstream particles being significantly different from that of constant property flow. The variation trend of drag of coarse graining particle is consistent with that of isolated particle. The physical properties lead to significant differences in the values of drag. In this paper, the dominance of the effects of physical properties in a variety of cases is confirmed. Finally, a physical properties effect model is developed accordingly.

Chemical and optical properties of aerosols and their interrelationship in winter in the megacity Shanghai of China

A field campaign on air quality was carried out in Shanghai in winter of 2012. The concentrations of NO, NO2, NOx, SO2, CO, and PM2.5increased during haze formation. The average masses of SO4^2-, NO3^-and NH4^＋were 10.3, 11.7 and 6.7 μg/m^3 during the haze episodes, which exceeded the average（9.2, 7.9, and 3.4 μg/m3） of these components in the non-haze days. The mean values for the aerosol scattering coefficient（b sp）, aerosol absorption coefficient（b ap） and single scattering albedo（SSA） were 288.7, 27.7 and0.91 Mm-1, respectively. A bi-peak distribution was observed for the mass concentrations of CO, NO, NO2, and NOx. More sulfate was produced during daytime than that in the evening due to photochemical reactions. The mass concentration of NH4＋achieved a small peak at noontime. NO3-showed lower concentrations in the afternoon and higher concentrations in the early morning. There were obvious bi-peak diurnal patterns for b sp and b ap as well as SSA. b sp and b ap showed a positive correlation with PM2.5mass concentration.（NH4）2SO4, NH4NO3, organic mass, elemental carbon and coarse mass accounted for 21.7%, 19.3%, 31.0%, 9.3% and 12.3% of the total extinction coefficient during non-haze days, and 25.6%, 24.3%, 30.1%, 8.1% and 8.2% during hazy days. Organic matter was the largest contributor to light extinction. The contribution proportions of ammonium sulfate and ammonium nitrate to light extinction were significantly higher during the hazy time than during the non-haze days.