Design of a Proportional-Integral-Derivative Controller for an Automatic Generation Control of Multi-area Power Thermal Systems Using Firefly Algorithm

Essentially, it is significant to supply the consumer with reliable and sufficient power. Since, power quality is measured by the consistency in frequency and power flow between control areas. Thus, in a power system operation and control,automatic generation control(AGC) plays a crucial role. In this paper, multi-area(Five areas: area 1, area 2, area 3, area 4 and area 5) reheat thermal power systems are considered with proportional-integral-derivative(PID) controller as a supplementary controller. Each area in the investigated power system is equipped with appropriate governor unit, turbine with reheater unit, generator and speed regulator unit. The PID controller parameters are optimized by considering nature bio-inspired firefly algorithm(FFA). The experimental results demonstrated the comparison of the proposed system performance(FFA-PID)with optimized PID controller based genetic algorithm(GAPID) and particle swarm optimization(PSO) technique(PSOPID) for the same investigated power system. The results proved the efficiency of employing the integral time absolute error(ITAE) cost function with one percent step load perturbation(1 % SLP) in area 1. The proposed system based FFA achieved the least settling time compared to using the GA or the PSO algorithms, while, it attained good results with respect to the peak overshoot/undershoot. In addition, the FFA performance is improved with the increased number of iterations which outperformed the other optimization algorithms based controller.

Proportion Integration Differentiation(PID)Control Strategy of Belt Sander Based on Fuzzy Algorithm

Aiming at solving the problems of response lag and lack of precision and stability in constant grinding force control of industrial robot belts,a constant force control strategy combining fuzzy control and proportion integration differentiation(PID)was proposed by analyzing the signal transmission process and the dynamic characteristics of the grinding mechanism.The simulation results showed that compared with the classical PID control strategy,the system adjustment time was shortened by 98.7%,the overshoot was reduced by 5.1%,and the control error was 0.2%-0.5%when the system was stabilized.The optimized fuzzy control system had fast adjustment speeds,precise force control and stability.The experimental analysis of the surface morphology of the machined blade was carried out by the industrial robot abrasive grinding mechanism,and the correctness of the theoretical analysis and the effectiveness of the control strategy were verified.

Adaptive proportional integral differential control based on radial basis function neural network identification of a two-degree-of-freedom closed-chain robot

A closed-chain robot has several advantages over an open-chain robot, such as high mechanical rigidity, high payload, high precision. Accurate trajectory control of a robot is essential in practical-use. This paper presents an adaptive proportional integral differential （PID） control algorithm based on radial basis function （RBF） neural network for trajectory tracking of a two-degree-of-freedom （2-DOF） closed-chain robot. In this scheme, an RBF neural network is used to approximate the unknown nonlinear dynamics of the robot, at the same time, the PID parameters can be adjusted online and the high precision can be obtained. Simulation results show that the control algorithm accurately tracks a 2-DOF closed-chain robot trajectories. The results also indicate that the system robustness and tracking performance are superior to the classic PID method.

Fuzzy Self-adaptive Proportional Integration Differential Control for Attitude Stabilization of Quadrotor UAV

The technology of attitude control for quadrotor unmanned aerial vehicles(UAVs) is one of the most important UAVs' research areas.In order to achieve a satisfactory operation in quadrotor UAVs having proportional integration differential(PID) controllers,it is necessary to appropriately adjust the controller coefficients which are dependent on dynamic parameters of the quadrotor UAV and any changes in parameters and conditions could affect desired performance of the controller.In this paper,combining with PID control and fuzzy logic control,a kind of fuzzy self-adaptive PID control algorithm for attitude stabilization of the quadrotor UAV was put forward.Firstly,the nonlinear model of six degrees of freedom(6-DOF) for quadrotor UAV is established.Secondly,for obtaining the attitude of quadrotor,attitude data fusion using complementary filtering is applied to improving the measurement accuracy and dynamic performance.Finally,the attitude stabilization control simulation model of the quadrotor UAV is build,and the self-adaptive fuzzy parameter tuning rules for PID attitude controller are given,so as to realize the online self-tuning of the controller parameters.Simulation results show that comparing with the conventional PID controller,this attitude control algorithm of fuzzy self-adaptive PID has a better dynamic response performance.

Fuzzy PID control system for hose pulse experiment based on LabVIEW

The hose pulse testing bench generally uses electro-hydraulic servo system. It occupies little space, tracks signals fast and has simple structure, and therefore it is widely used in industrial control field. However, there are lots of problems such as little accuracy and instability caused by slow response of hydraulic and various interference factors. Simple proportional integra- tion derivatiation （PID） control method of traditional pulse bench is simple in principle, but it is difficult in parameter adjust- ment. According to the special requirements of the control system, a PID method based on fuzzy control is proposed in the pa- per. This method not only retains the advantages of the conventional control system, but also ameliorates the drawbacks of parameter uncertainty, instability and lag. It has been testified that the method is practicable and can improve the precision and adaptation.

Improved single-neuron PID controller for DC motor applied in robot system

An improved single-neuron proportional integral derivative （ PID ） controller and a new method to build the DC motor system were presented in the article. In the simulation, the robot arm is considered as an external load to DC motor. Both the motor module and the load module are crea- ted in Simulink to achieve simulation results closer to real robot system. In this way, it can well veri- fy the performance of the improved single-neuron PID controller, which is a combined controller of normal PID controller and single-neuron PID controller. Besides, an intelligent switcher can help to realize the function of choosing a better control algorithm according to motor＇ s velocity output. Sim- ulated results confirm the rapid and stable response of the improved PID controller. Moreover, the improved single-neuron PID controller has an excellent ability to overcome the load impact and su- press the jamming signals. At last, a GUI interface platform is built to make the controller easier to be applied in other robot systems.

Design of Nichols PID Controller for Load Frequency Control

为解决互联水电系统负荷频率控制（load frequencycontrol,LFC）问题,及保持互联电网系统频率、联络线功率及区域控制误差（area control error,ACE）的稳定,根据闭环系统谐振峰值与系统响应最大峰值之间的关系,构建一个与系统参数及控制器参数都相关的优化问题,通过该问题的求解获得控制器参数与系统参数之间的数学关系,针对水轮发电系统非最小相位特性,通过串加比例–微分（proportional-derivative,PD）控制方式降低系统阶次,设计尼科尔斯（Nichols）曲线的比例–积分–微分（proportional-integral-derivative,PID）控制器。基于模型参数扰动和负荷干扰的仿真结果表明：尼科尔斯PID控制器能快速调整系统频率偏差、联络线功率偏差及ACE为0,具有良好的鲁棒性能和抗负荷干扰性能,系统过渡过程性能明显优于传统PID调节器结果。

PID-Based Bit Allocation Strategy for Asymmetric Stereoscopic Video Coding with Fuzzy Quality Controller

Asymmetric stereoscopic video coding can take advantage of binocular suppression in human vision by representing one of the two views in lower quality.This paper proposes a bit allocation strategy for asymmetric stereoscopic video coding.In order to improve the accuracy of bit allocation and rate control in the left view,a proportionalintegral-derivative controller is adopted.Meanwhile,to control the quality fluctuation between consecutive frames of the left view,a quality controller is adopted.Besides,a fuzzy controller is proposed to control the variation in quality between the left and right views by comparing the PSNR disparity of two views with a fixed threshold,which is used to quantize the binocular psycho-visual redundancy and adjust the quantization parameter (QP) of the right view correspondingly.The proposed algorithm has been implemented in H.264/AVC video codec,and the experimental results show its effectiveness in rate control while keeping a good quality for the left view,and fewer bits are allocated for the right view so that the overall bit rate is saved by 7.2% at most without the loss of subjective visual quality for stereoscopic video.

基于改进MPC与RBF-PID的智能车轨迹跟踪控制

为提升智能汽车轨迹跟踪控制的稳定性和精度,提出一种基于时域参数自适应MPC与RBF-PID的轨迹跟踪控制方法.首先搭建车辆横纵向动力学模型;其次分析控制时域与预测时域对跟踪精度的影响,设计时域参数自适应MPC横向控制器并进行仿真验证;然后基于径向基函数(RBF)神经网络整定PID控制参数,设计分层式纵向控制器,并设计折线速度曲线与PID算法进行对比;最后以车速为耦合点构建智能汽车横纵向综合控制系统,并在蛇形工况下对横纵向综合控制系统进行仿真实验.结果表明,所设计的横向控制器能保证低速时的跟踪精度和高速时的车辆稳定性,纵向控制器可有效提高速度跟踪精度,横纵向综合控制系统能实现车辆在变车速工况下对轨迹的精准跟踪,同时保证良好的行驶稳定性与舒适性.

基于改进DDPG-PID的芯片共晶键合温度控制

芯片共晶键合对加热过程中的升温速率、保温时间和温度精度要求较高,在使用传统的比例-积分-微分(PID)温度控制方法时,存在响应时间过长、超调量过大、控制温度不够准确等问题。针对共晶加热台的温度控制问题,提出了一种基于改进的深度确定性策略梯度(DDPG)强化学习算法优化PID参数的控制方法,采用分类经验回放的思想,以奖励值大小为标准对经验进行分类存放,根据智能体当前的状态和下一步动作,从相应的经验池中进行采样并训练,并根据PID控制算法的特性设计了合理的奖励函数,改善了强化学习中奖励稀疏的问题,提高了算法的收敛速度与性能。仿真结果表明,与传统PID控制、常规DDPG-PID控制相比,改进DDPG-PID控制缩短了响应时间,降低了超调量,近乎消除了稳态误差,提高了控制性能和系统稳定性。

基于MPC和PID的脚轮式全向移动平台轨迹跟踪

针对现有运动控制策略无法保证独立驱动脚轮式全向移动平台位姿的高精度控制问题,提出一种基于模型预测控制(MPC)和PID控制相结合的双闭环轨迹跟踪控制策略。首先,利用运动学几何关系建立独立驱动脚轮式全向移动平台在世界坐标系下的三自由度运动学模型,基于正交分解法建立平台在机器人坐标系下的逆运动学模型,以反映平台中心点速度与各个脚轮转速间的关系;其次,采用MPC并基于三自由度运动学模型设计位姿控制器,使平台对期望轨迹进行位姿跟踪,并在考虑多目标约束条件的情况下通过位姿控制器求解出最优控制量;最后,采用PID设计速度控制器,用于跟踪位姿控制器输出的期望速度,通过平台逆运动学模型计算得到期望轮速,从而驱动平台实现全向运动。通过仿真验证了所提控制策略的有效性,平台能有效跟踪直线轨迹和圆形轨迹。仿真结果表明,与通过平台转角逆运动学模型解耦驱动轮速的位置单环轨迹跟踪控制策略相比,加入速度内环后系统超调量下降97.23%,响应时间缩短36.84%。

基于改进PID-LQR的导弹稳定控制方法研究

导弹稳定控制系统是提高导弹制导性能的关键技术之一,一直以来都是研究的热点和重点。以导弹纵向平面为例,建立了导弹稳定控制的状态空间模型,推导了LQR控制算法,在传统LQR方法的基础上,结合PID算法提出了一种改进的PID-LQR导弹稳定控制方法。通过仿真分析,比较了所提方法和传统LQR方法、改进LQR方法、模糊PID-LQR方法的控制性能,并对建立的导弹模型参数进行了拉偏试验,仿真结果表明所提出的方法优于其他3种方法,具有良好的控制性能和鲁棒性。

冷链运输车空调冷风机运行自适应PID控制方法研究

冷链运输车空调冷风机运行环境复杂,导致传统的比例积分微分(PID)控制过程难以准确设定控制参数。为解决这一问题,设计冷链运输车空调冷风机运行自适应PID控制方法。首先,通过分析冷链运输车空调冷风机工作过程,选取多个控制参数,以降低复杂度。然后,设计基于自适应PID控制器的控制模型,以送风温度和送风压力作为控制量,将冷、热水流量及风机转速作为被控制量,求解控制量和被控制量的传递函数。最后,根据传递函数与期望值间的耦合关系,对控制分量的增减进行调整,以实现冷链运输车空调冷风机运行的自适应PID控制。试验结果表明,该方法能够使冷链运输车内温度保持稳定。该方法控制精准度高、鲁棒性强、实用价值高,可以确保货物在整个冷链运输过程中的质量和安全。

基于深度强化学习的分层自适应PID控制算法

比例积分微分(PID)控制在工业控制和机器人控制领域应用非常广泛.然而,其在实际应用中存在参数整定复杂、系统无法精准建模以及对被控对象变化敏感的问题.为了解决这些问题,本文提出了一种基于深度强化学习算法的分层自适应PID控制算法,即TD3-PID,用于移动机器人的自动控制.其中,上层控制器通过实时观测当前环境状态和系统状态实现对下层PID控制器参数和输出补偿量进行调整,以实时补偿误差从而优化系统性能.本文将所提出的TD3-PID控制器应用于4轮移动机器人轨迹跟踪任务并和其他控制方法进行了真实场景实验对比.结果显示TD3-PID控制器表现出更优越的动态响应性能和抗干扰能力,整体响应误差显著减小,在提高控制系统性能方面具有显著的优势.

基于模糊PID的打磨头角度控制策略研究

在进行风电机组叶片表面打磨工序时,需要控制打磨头的径向与叶片表面保持垂直。对打磨头的角度调整问题进行分析和研究,通过分析打磨头的结构构成与运动轨迹,建立打磨头伺服系统的数学模型。基于角度变化引起的重力转矩补偿量,提出一种模糊比例-积分-微分(Proportion-Integral-Differential,PID)的角度伺服控制系统。Simulink仿真验证结果表明,重力补偿后模糊PID控制方法的打磨头伺服系统响应速度更快、误差更小,能够较好地调整打磨头的角度。

基于PID算法的轧钢加热炉煤气智能燃烧控制研究

常规的轧钢加热炉煤气智能燃烧控制方法主要使用Fuzzy双交叉限幅控制器进行控制阶跃响应,易受温变超调作用的影响,导致燃烧效率偏低。基于此,提出一种基于比例-积分-微分(Proportion Integral Differential,PID)算法的轧钢加热炉煤气智能燃烧控制方法。生成轧钢加热炉煤气智能燃烧控制策略,利用PID算法设计轧钢加热炉煤气智能燃烧控制器,从而实现轧钢加热炉煤气智能燃烧控制。实验结果表明,设计的轧钢加热炉煤气智能燃烧PID算法控制方法在不同控制起始时间下的煤气智能燃烧效率均较高,控制性能良好,具有较高的实际应用价值。

基于自适应PID算法的变频器节能控制系统设计

在当前的电气应用中,变频器控制系统应用广泛,但面临的挑战也愈发明显。特别是在能耗管理方面,由于其缺乏智能调控频段能耗的能力,系统整体能耗偏高。为此,文章提出基于自适应比例-积分-微分(Proportional Integral Derivative,PID)算法的变频器节能控制系统设计。构建以微处理器为核心的变频器节能控制结构,将神经网络与PID控制器相结合,构造自适应PID控制器。结合变频器节能控制结构的能耗计算与反馈,通过自适应调节权值系数完成变频系数调整,降低各频段能耗,实现变频器节能控制研究。实验结果显示,该系统节能效果显著,能耗最高仅为20 J,且相较于对比文献,该系统运行稳定,运行时间短,为变频器节能控制运行提供了保障。

孤岛运行微电网中模糊PID下垂控制器设计

针对微电网孤岛运行时分布式电源(DG)所采用的传统电压/频率下垂控制方法的不足,提出了一种具有比例—积分—微分(PID)结构的改进下垂控制方法,并根据电压和频率的变化,使用模糊推理技术来优化相应参数;设计了一种自适应模糊PID下垂控制器,以进一步有效减小微电网孤岛运行时由于扰动所造成的电压/频率振荡。通过仿真计算验证了所提出的模糊PID下垂控制器设计的正确性和有效性。

模糊自整定PID温度控制系统的建模与仿真

针对炒茶机的加热控制系统跟踪设定的温度值滞后、自动调节加热装置实时性差的问题,设计一种模糊自整定比例积分微分(PID)参数控制器。采用PID控制和模糊控制算法相结合的方法,实现模糊控制对PID参数的调整。利用Matlab在Simulink中建立模型,并对该控制器进行仿真分析。结果表明,模糊PID自整定控制器的超调量≈1%,稳态误差es=0。该方法可提高温度控制系统的性能。