基于PID切换控制的弹道修正引信滚转角控制方法

为解决弹道修正引信在修正过程中弹体受力变化较大引起的模型非线性问题,为保证滚转角控制算法的有效控制范围可有效覆盖整个修正控制过程,采用了基于动压变化的位置-速度双闭环比例-积分-微分(proportional-integral-differential,PID)切换控制算法.在传统PID控制算法基础上引入切换控制,将PID控制系统设计成子系统,依靠引信动力学模型与动压之间的关联,以动压为切换信号制定切换规则将多个PID控制系统串联,拓宽了滚转角控制系统的有效控制范围.结合理论分析与仿真验证,结果表明:在整个弹道修正控制过程中定位精度在0.25°以内,响应时间小于0.3 s,验证了基于动压变化的PID切换控制算法对非线性的引信滚转角控制模型、持续滚转角控制的可行性.

Design of a Proportional-Integral-Derivative Controller for an Automatic Generation Control of Multi-area Power Thermal Systems Using Firefly Algorithm

Essentially, it is significant to supply the consumer with reliable and sufficient power. Since, power quality is measured by the consistency in frequency and power flow between control areas. Thus, in a power system operation and control,automatic generation control(AGC) plays a crucial role. In this paper, multi-area(Five areas: area 1, area 2, area 3, area 4 and area 5) reheat thermal power systems are considered with proportional-integral-derivative(PID) controller as a supplementary controller. Each area in the investigated power system is equipped with appropriate governor unit, turbine with reheater unit, generator and speed regulator unit. The PID controller parameters are optimized by considering nature bio-inspired firefly algorithm(FFA). The experimental results demonstrated the comparison of the proposed system performance(FFA-PID)with optimized PID controller based genetic algorithm(GAPID) and particle swarm optimization(PSO) technique(PSOPID) for the same investigated power system. The results proved the efficiency of employing the integral time absolute error(ITAE) cost function with one percent step load perturbation(1 % SLP) in area 1. The proposed system based FFA achieved the least settling time compared to using the GA or the PSO algorithms, while, it attained good results with respect to the peak overshoot/undershoot. In addition, the FFA performance is improved with the increased number of iterations which outperformed the other optimization algorithms based controller.

Fractional Order Proportional Integral Derivative Controller Design and Simulation for Bioengineering Systems

This paper deals with the study of fractional order system tuning method based on Factional Order Proportional Integral Derivative( FOPID) controller in allusion to the nonlinear characteristics and fractional order mathematical model of bioengineering systems. The main contents include the design of FOPID controller and the simulation for bioengineering systems. The simulation results show that the tuning method of fractional order system based on the FOPID controller outperforms the fractional order system based on Fractional Order Proportional Integral( FOPI) controller. As it can enhance control character and improve the robustness of the system.

基于WOA优化FNN-PID的单晶硅加热炉炉温控制

针对单晶硅加热炉炉温控制的大惯性、强耦合、长调节时间等问题,提出了基于鲸鱼优化算法(WOA)的优化模糊神经网络(FNN)比例-积分-微分(PID)算法。通过测试实验装置的温度推算出模型表达式,采用WOA进行选代寻优,得到合适的PID参数,利用FNN对PID参数进行实时调整,以实现动态解耦。通过仿真软件进行仿真验证,并在搭建的模型上分别进行阶跃响应实验和信号跟随实验。仿真结果表明,相较于传统的PID算法和FNN-PID算法,基于WOA的优化FNN-PID算法有效提升了系统的升温速度且无超调。对加热炉进行升温实验,结果表明温度超调量最高为0.9℃,恒温区温控精度保持在±0.3℃,表明该方法可有效提升系统升温速度和稳定性。

基于PID控制的智运机器人关键技术研究

为提高智运效率和精准性,通过需求分析,设计了基于Arduino主板的智运机器人。其旋转机构的设计将两种不同类型的相邻魔方有效分开智运;电源模块分开供电设计解决了主板易烧和电机动力不足的问题;联合使用抗干扰能力强的灰度传感器和PID控制算法动态调整驱动轮差速实现了稳定的巡线智运。试验测试表明:包括旋转板和拨杆的旋转机构功能齐全、设计巧妙,PID巡线控制算法可靠,场地上任何位置、任何类型的魔方都能智运到目标区域,验证了智运机器人的稳定性、功能性和高效性。

基于改进麻雀优化PID的波浪补偿控制方法

随着海上风电“十四五”规划的不断推动,在深远海域对兆瓦级大功率海上风机的需求量随之增加,其规模也在不断扩大。但是,在吊运、安装等海上工作过程中,复杂海浪对船舶产生的持续影响导致风机安装的精度和效率大幅下降,甚至会对人员安全以及财产造成重大损失。在深远海域复杂海况下对工程船舶进行有效的波浪补偿,可提供稳定的作业环境以保证精准高效地完成各项工作,因此,本文提出了一种基于改进麻雀优化PID的波浪补偿控制方法并将其应用于Stewart补偿平台。首先,建立波浪补偿平台动力学以及运动学反解模型,并设计正解模型迭代求解算法。随后,使用PID进行波浪补偿控制,并通过麻雀搜索算法优化参数。接着,采用Circle混沌映射对其进行初始化分布,以解决初始化不均匀的问题;并采用动态自适应加权、柯西突变以及反向学习以提升算法全局寻优能力。最后,生成4~6级海况下的某工程船运动数据作为系统输入,利用MATLAB和Simulink软件平台搭建模型进行补偿控制验证,并在Stewart硬件平台上做补偿试验。结果表明,改进麻雀搜索算法具有较快的收敛速度、较高的精度和更好的寻优能力,优化后的PID控制方法更适合用于复杂海况下波浪补偿平台的控制优化,可为大功率海上风机安装的补偿平台控制系统设计提供参考。

数控压机伺服控制系统复合控制器I-ABC与PID优化

为了提高数控压机伺服控制系统的控制精度,针对伺服控制系统运行控制过程构建数学模型,在人工蜂群算法基础上融入了云分析模型,之后采用改进人工蜂群算法(Improved Artificial Bee Colony,I-ABC)调节比例-积分-微分(Proportional Integral Differential,PID)参数,建立了一种复合控制方法。研究结果表明:以I-ABC进行PID控制时,可以使幅度差降低到0.4%,相位差基本在-0.54°之内,系统加载精度也获得了明显提升,表现出了更优的跟踪性能。以I-ABC进行PID控制时,能够对多余力起到明显抑制作用,响应速度也获得明显提升,可以有效满足系统的准确控制要求。在系统内加入干扰信号,引入I-ABC实施PID调节可以减小系统超调量,还可以获得更短调节时间,使系统获得更强抗干扰性能。

有源电力滤波器补偿的PI解耦控制技术研究

电网中电压和电流波形的失真会产生谐波,导致电网功率因数降低,并影响电力系统的稳定性和可靠性。为了确保电力系统的正常工作,研究了基于有源电力滤波器补偿的比例积分(PI)解耦控制技术。设计了基于二极管钳位式的有源电力滤波器模型。结合基尔霍博电压法,降低控制谐波和解除部分变量耦合。针对设备非线性产生的谐波,分析有源电力滤波器的可逆性,获得输入雅可比矩阵,以实现滤波器旋转坐标的线性化。利用变换矩阵转换转动角速向量,输入谐波的幅度,输出电流取样延迟,完成无差PI解耦控制。试验结果表明,所提技术能够有效解耦滤波器的谐波电流成分,从而补偿电网中的失真电流。该技术可以减少谐波对电力系统的整体影响,保证设备的正常运行。

Improved single-neuron PID controller for DC motor applied in robot system

An improved single-neuron proportional integral derivative （ PID ） controller and a new method to build the DC motor system were presented in the article. In the simulation, the robot arm is considered as an external load to DC motor. Both the motor module and the load module are crea- ted in Simulink to achieve simulation results closer to real robot system. In this way, it can well veri- fy the performance of the improved single-neuron PID controller, which is a combined controller of normal PID controller and single-neuron PID controller. Besides, an intelligent switcher can help to realize the function of choosing a better control algorithm according to motor＇ s velocity output. Sim- ulated results confirm the rapid and stable response of the improved PID controller. Moreover, the improved single-neuron PID controller has an excellent ability to overcome the load impact and su- press the jamming signals. At last, a GUI interface platform is built to make the controller easier to be applied in other robot systems.

Robust PID controller design for time delay processes with peak of maximum sensitivity criteria

The motivation of this work is to obtain single PI/PID tuning formula for different types of processes with enhanced disturbance rejection performance. The proposed tuning formula consistently gives better performance in comparison to several well-known methods at the same degree of robustness for stable, integrating and unstable processes. For the selection of the closed-loop time constant(τc), a guideline is provided over a broad range of time-delay/time-constant ratios on the basis of the peak of maximum sensitivity(Ms). An analysis has been performed for the uncertainty margin with the different process parameters for the robust controller design. It gives the guideline of the Ms-value settings for the PI controller designs based on the process parameters uncertainty. Furthermore, a relationship has been developed between Ms-value and uncertainty margin with the different process parameters(k, τ and θ). Simulation study has been conducted for the broad class of processes and the controllers are tuned to have the same degree of robustness by measuring the maximum sensitivity, Ms, in order to obtain a reasonable comparison.

PSO Based Multi-Objective Approach for Controlling PID Controller

CSTR(Continuous stirred tank reactor)is employed in process control and chemical industries to improve response characteristics and system efficiency.It has a highly nonlinear characteristic that includes complexities in its control and design.Dynamic performance is compassionate to change in system parameterswhich need more effort for planning a significant controller for CSTR.The reactor temperature changes in either direction from the defined reference value.It is important to note that the intensity of chemical actions inside the CSTR is dependent on the various levels of temperature,and deviation from reference values may cause degradation of biomass quality.Design and implementation of an appropriate adaptive controller for such a nonlinear system are essential.In this paper,a conventional Proportional Integral Derivative(PID)controller is designed.The conventional techniques to deal with constraints suffer severe limitations like it has fixed controller parameters.Hence,A novel method is applied for computing the PID controller parameters using a swarm algorithm that overcomes the conventional controller’s limitation.In the proposed technique,PID parameters are tuned by Particle Swarm Optimization(PSO).It is not easy to choose the suitable objective function to design a PID controller using PSO to get an optimal response.In this article,a multi-objective function is proposed for PSO based controller design of CSTR.

Design of Nichols PID Controller for Load Frequency Control

为解决互联水电系统负荷频率控制（load frequencycontrol,LFC）问题,及保持互联电网系统频率、联络线功率及区域控制误差（area control error,ACE）的稳定,根据闭环系统谐振峰值与系统响应最大峰值之间的关系,构建一个与系统参数及控制器参数都相关的优化问题,通过该问题的求解获得控制器参数与系统参数之间的数学关系,针对水轮发电系统非最小相位特性,通过串加比例–微分（proportional-derivative,PD）控制方式降低系统阶次,设计尼科尔斯（Nichols）曲线的比例–积分–微分（proportional-integral-derivative,PID）控制器。基于模型参数扰动和负荷干扰的仿真结果表明：尼科尔斯PID控制器能快速调整系统频率偏差、联络线功率偏差及ACE为0,具有良好的鲁棒性能和抗负荷干扰性能,系统过渡过程性能明显优于传统PID调节器结果。

基于神经网络PI的电静液作动器温度补偿控制方法研究

电静液作动器(Electro-hydrostatic Actuator,EHA)作为一种高性能集成化的动力执行器,广泛应用于航天航空、工业生产和军事领域。在不同油液温度下,液压油的体积弹性模量、黏度等性质会发生变化,从而对EHA的控制精度产生影响。针对此问题,首先建立了EHA数学模型;其次,设计了反向传播(BP)神经网络对比例积分控制器(PI)控制参数进行在线调节,补偿温度变化对跟踪精度的影响;最后,通过实验验证了传统PI控制的EHA跟踪精度与温度变化有着密切关系,并将BPPI控制器与PI控制器进行实验对比。实验结果表明,所设计的BPPI控制器在不同油液温度下平均跟踪误差之间的差值较PI控制器降低80%以上;且在相同温度下,平均跟踪误差较PI控制器降低60%以上。

全桥LLC谐振变换器的积分滑模-PI混合控制

全桥LLC谐振变换器的PI控制存在响应慢和鲁棒性差的问题,滑模控制存在高频抖振问题。针对这些问题,提出了基于模糊规则切换的积分滑模-PI混合控制方法。首先,通过扩展函数描述法建立全桥LLC谐振变换器的大信号模型,利用输入输出反馈线性化设计滑模面;然后,利用扫频法验证PI控制设计的合理性;最后,经多次实验,确定模糊控制的最佳输入和输出隶属度函数,实现在瞬态时由滑模控制起主导作用,在稳态时仅使用PI控制的混合控制方法。在MATLAB/Simulink中进行仿真分析,仿真结果表明,所提控制方法不仅具有滑模控制的瞬态响应快、鲁棒性强的优点,还消除了高频抖振,具有良好的控制效果。

Adaptive proportional integral differential control based on radial basis function neural network identification of a two-degree-of-freedom closed-chain robot

A closed-chain robot has several advantages over an open-chain robot, such as high mechanical rigidity, high payload, high precision. Accurate trajectory control of a robot is essential in practical-use. This paper presents an adaptive proportional integral differential （PID） control algorithm based on radial basis function （RBF） neural network for trajectory tracking of a two-degree-of-freedom （2-DOF） closed-chain robot. In this scheme, an RBF neural network is used to approximate the unknown nonlinear dynamics of the robot, at the same time, the PID parameters can be adjusted online and the high precision can be obtained. Simulation results show that the control algorithm accurately tracks a 2-DOF closed-chain robot trajectories. The results also indicate that the system robustness and tracking performance are superior to the classic PID method.

基于自适应PI控制的superbuck变换器

针对superbuck变换器稳定性易受参数偏移和工况变化影响的问题,提出了一种基于瞬态事件捕获的自适应比例积分(PI)控制方法。在该方法中,事件捕获电路通过计算瞬态响应中输出电压的上冲和下冲次数,根据振荡周期把电压响应分类成不同的瞬态事件。更进一步,对不同的瞬态事件进行加权计算得到PI控制器中的增益,从而调节系统带宽和相位裕度。在阻尼网络发生参数偏移的情况下,当参考电压从25 V变化到28 V时,振荡最大幅度从2 V减小到400 mV。100 W superbuck变换器的实验结果表明,自适应PI控制器在参数偏移和工况变化下有效地改善稳定性。

Stability Improvement of Power System by Using PI ＆ PD Controller

This paper presents the model of a SVC （Static VAR Compensator） which is controlled externally by a PI （Proportional Integral） ＆ PD （Proportional Differential） controllers for the improvements of voltage stability and damping effect of an on line power system. Both controller parameters has been optimized by using Ziegler-Nichols close loop tuning method. Both single phase and three phase （L-L） faults have been considered in the research. In this paper, a power system network is considered which is simulated in the phasor simulation method ＆ the network is simulated in four steps; without SVC, With SVC but no externally controlled, SVC with PI controller ＆ SVC with PD controller. Simulation result shows that without SVC, the system parameters become unstable during faults. When SVC is imposed in the network, then system parameters become stable. Again, when SVC is controlled externally by PI ＆ PD controllers, then system parameters becomes stable in faster way then without controller. It has been observed that the SVC ratings are only 50 MVA with controllers and 200 MVA without controllers. So, SVC with PI ＆ PD controllers are more effective to enhance the voltage stability and increases power transmission capacity of a power system. The power system oscillations are also reduced with controllers in compared to that of without controllers. So with both controllers the system performance is greatly enhanced.

Comparative Study of Different Decoupling Schemes for TITO Binary Distillation Column via PI Controller

This paper presents a comparative study of different decoupling control schemes for a two-input, two-output(TITO) binary distillation column via proportional-integral(PI)controller. The key idea behind this paper is designing two novel fuzzy decoupling schemes that depend on human knowledge,instead of the system mathematical model used in conventional decoupling schemes. Based on conventional and inverted decoupling schemes, fuzzy and inverted fuzzy decoupling schemes are developed. The control effect is compared using simulation results for the proposed two schemes with conventional decoupling and inverted decoupling. The proposed fuzzy decoupling schemes are easy to realize and simple to design, besides they have a good decoupling capability. Two methods are used to prove asymptotic stability of each loop and the entire closed-loop system by applying the proposed fuzzy decoupling-based PI controller.The Wood and Berry model of a binary distillation column is used to illustrate the applicability of the proposed schemes.

基于比例谐振自耦PI控制的调速系统

针对永磁同步电机调速系统矢量控制过程中,逆变器死区、电机磁场分布谐波以及电流在采样过程中存在误差等因素导致的电机控制效果不佳问题,提出了一种改进型自耦PI控制的双环控制策略。为减小信号的跟踪误差,采用加速度前馈的方式,将增加Levant微分器的自耦PI控制器引入到永磁同步电机速度环中,确保对含有噪声的输入信号准确求导以提高系统的鲁棒性。另外,所提策略在电流环中将增加加速前馈的自耦PI控制结构的比例项和标准谐振器相结合,构成比例谐振自耦PI控制器,使永磁同步电机在电流环的控制中能更好地补偿电流,达到抑制电流谐波的作用。通过分析伺服系统的控制机理,在被控对象PMSM数学模型的基础上,给出了改进型自耦PI控制结构的设计方法。实验结果表明,所提出的控制策略能够减小电机自身参数变化对系统性能的影响并且在低速域具有良好的抑制电流谐波作用,验证了所设计的改进型自耦PI控制器的有效性。