The removal of trace propyne(C_(3)H_(4))from propyne/propylene(C_(3)H_(4)/C_(3)H_(6))mixtures is a technical and challenging task during the production of polymer-grade propylene in view of their very similar size and...The removal of trace propyne(C_(3)H_(4))from propyne/propylene(C_(3)H_(4)/C_(3)H_(6))mixtures is a technical and challenging task during the production of polymer-grade propylene in view of their very similar size and physical properties.While some progress has been made,it is still very challenging to use some highly stable and commercially available porous materials via an energy-efficient adsorptive separation process.Herein,we report the ultrafine tuning of the pore apertures in type-A zeolites for the highly efficient removal of trace amounts of C_(3)H_(4)from C_(3)H_(4)/C_(3)H_(6)mixtures.The resulting ion-exchanged zeolite 5 A exhibits a large C_(3)H_(4)adsorption capacity(2.3 mmol g^(-1)under 10^(-4)MPa)and high C_(3)H_(4)/C_(3)H_(6)selectivity at room temperature,which were mainly attributed to the ultrafine-tuned pore size that selectively blocks C_(3)H_(6)molecules,while maintaining the stro ng adsorption of C_(3)H_(4)at low pressure region.High purity of C_(3)H_(6)(>99.9999%)can be directly obtained on this material under ambient conditions,as demonstrated by the experimental breakthrough curves obtained for both 1/99 and 0.1/99.9(V V)C_(3)H_(4)/C_(3)H_(6) mixtures.展开更多
While WCl_6-Ph_4Sn fails to polymerize 1-phenyl-1-propyne (PP) at room temperature, highmolecular weight (M_w up to 410× 10~3) polymers are obtained in high yields (up to 80%) when thepolymerizations of PP are ca...While WCl_6-Ph_4Sn fails to polymerize 1-phenyl-1-propyne (PP) at room temperature, highmolecular weight (M_w up to 410× 10~3) polymers are obtained in high yields (up to 80%) when thepolymerizations of PP are carried out in the presence of C_(60) using the W catalyst under the same conditions.The polymers are soluble in common organic solvents such as THF, chloroform, and toluene. Molecularstructures of the polymers are characterized by FT-IR, UV, NMR, GPC and XRD, and it is found that C_(60) iscopolymerized with PP. Thus C_(60) plays the dual roles of comonomer and cocatalyst in the polymerizationreaction. C_(60) contents of the copolymers can be easily changed by varying the C_(60) amounts in the feedmixtures. The copolymers effectively limit strong 532 nm laser pulses, whose limiting performance issuperior to that of parent C_(60).展开更多
The permeability of copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane for twelve gases (0_2, N_2, CO_2, H_2, D_2, He, At, CH_4, C_2H_4, C_2H_6, C_3H_6 and C_3H_8) was examined. The basic laws o...The permeability of copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane for twelve gases (0_2, N_2, CO_2, H_2, D_2, He, At, CH_4, C_2H_4, C_2H_6, C_3H_6 and C_3H_8) was examined. The basic laws of solution and diffusion of the gases in the membrane were expounded preliminarily. It was found that a linear relationship between logarithm of diffusion coefficient (D) and critical molar volume (V_c) of the gases. The permeation characteristics of the gases in the copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane was also discussed.展开更多
An investigation into the organic permselective separation through poly [1-trimethylsilyl-1-propyne] (PTMSP) and (1-trimethylsily 1)-1-(1-penta-methyl-disily 1)-1-propyne copolymer (TMSP-PMDSP) dense membranes was mad...An investigation into the organic permselective separation through poly [1-trimethylsilyl-1-propyne] (PTMSP) and (1-trimethylsily 1)-1-(1-penta-methyl-disily 1)-1-propyne copolymer (TMSP-PMDSP) dense membranes was made to gain an insight into the effect of the chemical structure of membrane materials on pervaporation (PV) characteristics. The results show that the copolymer has a higher separation factor alpha(org/water) but with a relatively lower value of flux J(t) (g/m(2).h) than pure PTMSP. This phenomenon may be attributed to the introduction of side chain with large bulk volume in copolymer, which brought about a decrease of excess free volume and the improvement of diffusion selectivity to some extent. With the same molar concentration of organic liquids in feed, THF/water solutions have the highest value of alpha(org/water) as well as J(t) in comparison with ethanol/water, iso-propanol/water and THF/water mixtures.展开更多
Surface modification of poly [1-(trimethylsilyl)-1-propyne] (PTMSP) membranes bybromine vapor has been studied. It is shown that Br/C atomic ratio at the surfaces increased withthe time of bromination until about 60 m...Surface modification of poly [1-(trimethylsilyl)-1-propyne] (PTMSP) membranes bybromine vapor has been studied. It is shown that Br/C atomic ratio at the surfaces increased withthe time of bromination until about 60 min, then it reached a plateau. The results of XPS and IRstudies indicated that the addition of bromine to double bonds and the replacement of H on CH_3 bybromine had taken place so that a new peak at 286.0 eV (C--Br)in C_(1s) spectra and some newbands, e. g. at 1220 and 580cm^(-1) in IR spectra were formed. The fact,t Po_2, permeability ofoxygen, decreased and α_(O_2/N_2), separation factor of oxygen relative to nitrogen, increased withbromination time, shows that surface modification of PTMSP by bromine may be an efficient approach to prepare PTMSP membranes used for practical gas separations.展开更多
基金financial support from the National Natural Science Foundation of China(21922810,21908153,21908155)program of Innovative Talents of Higher Education Institutions of Shanxithe supported by Cultivate Scientific Research Excellence Programs of Higher Education Institutions in Shanxi(CSREP)。
文摘The removal of trace propyne(C_(3)H_(4))from propyne/propylene(C_(3)H_(4)/C_(3)H_(6))mixtures is a technical and challenging task during the production of polymer-grade propylene in view of their very similar size and physical properties.While some progress has been made,it is still very challenging to use some highly stable and commercially available porous materials via an energy-efficient adsorptive separation process.Herein,we report the ultrafine tuning of the pore apertures in type-A zeolites for the highly efficient removal of trace amounts of C_(3)H_(4)from C_(3)H_(4)/C_(3)H_(6)mixtures.The resulting ion-exchanged zeolite 5 A exhibits a large C_(3)H_(4)adsorption capacity(2.3 mmol g^(-1)under 10^(-4)MPa)and high C_(3)H_(4)/C_(3)H_(6)selectivity at room temperature,which were mainly attributed to the ultrafine-tuned pore size that selectively blocks C_(3)H_(6)molecules,while maintaining the stro ng adsorption of C_(3)H_(4)at low pressure region.High purity of C_(3)H_(6)(>99.9999%)can be directly obtained on this material under ambient conditions,as demonstrated by the experimental breakthrough curves obtained for both 1/99 and 0.1/99.9(V V)C_(3)H_(4)/C_(3)H_(6) mixtures.
基金This work was in part supported by the Hong Kong Research Grants Council(HKUST6062/98P and DAG96/97 SC11).
文摘While WCl_6-Ph_4Sn fails to polymerize 1-phenyl-1-propyne (PP) at room temperature, highmolecular weight (M_w up to 410× 10~3) polymers are obtained in high yields (up to 80%) when thepolymerizations of PP are carried out in the presence of C_(60) using the W catalyst under the same conditions.The polymers are soluble in common organic solvents such as THF, chloroform, and toluene. Molecularstructures of the polymers are characterized by FT-IR, UV, NMR, GPC and XRD, and it is found that C_(60) iscopolymerized with PP. Thus C_(60) plays the dual roles of comonomer and cocatalyst in the polymerizationreaction. C_(60) contents of the copolymers can be easily changed by varying the C_(60) amounts in the feedmixtures. The copolymers effectively limit strong 532 nm laser pulses, whose limiting performance issuperior to that of parent C_(60).
文摘The permeability of copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane for twelve gases (0_2, N_2, CO_2, H_2, D_2, He, At, CH_4, C_2H_4, C_2H_6, C_3H_6 and C_3H_8) was examined. The basic laws of solution and diffusion of the gases in the membrane were expounded preliminarily. It was found that a linear relationship between logarithm of diffusion coefficient (D) and critical molar volume (V_c) of the gases. The permeation characteristics of the gases in the copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane was also discussed.
文摘An investigation into the organic permselective separation through poly [1-trimethylsilyl-1-propyne] (PTMSP) and (1-trimethylsily 1)-1-(1-penta-methyl-disily 1)-1-propyne copolymer (TMSP-PMDSP) dense membranes was made to gain an insight into the effect of the chemical structure of membrane materials on pervaporation (PV) characteristics. The results show that the copolymer has a higher separation factor alpha(org/water) but with a relatively lower value of flux J(t) (g/m(2).h) than pure PTMSP. This phenomenon may be attributed to the introduction of side chain with large bulk volume in copolymer, which brought about a decrease of excess free volume and the improvement of diffusion selectivity to some extent. With the same molar concentration of organic liquids in feed, THF/water solutions have the highest value of alpha(org/water) as well as J(t) in comparison with ethanol/water, iso-propanol/water and THF/water mixtures.
基金The project is supported by the National Natural Science Foundation of China
文摘Surface modification of poly [1-(trimethylsilyl)-1-propyne] (PTMSP) membranes bybromine vapor has been studied. It is shown that Br/C atomic ratio at the surfaces increased withthe time of bromination until about 60 min, then it reached a plateau. The results of XPS and IRstudies indicated that the addition of bromine to double bonds and the replacement of H on CH_3 bybromine had taken place so that a new peak at 286.0 eV (C--Br)in C_(1s) spectra and some newbands, e. g. at 1220 and 580cm^(-1) in IR spectra were formed. The fact,t Po_2, permeability ofoxygen, decreased and α_(O_2/N_2), separation factor of oxygen relative to nitrogen, increased withbromination time, shows that surface modification of PTMSP by bromine may be an efficient approach to prepare PTMSP membranes used for practical gas separations.