There are two states for the coal-mass on the goaf-side which is in stress equilibrium: the state of limit equilibrium(the bearing stress in the coal-mass equals its ultimate bearing stress) and the state of nonultima...There are two states for the coal-mass on the goaf-side which is in stress equilibrium: the state of limit equilibrium(the bearing stress in the coal-mass equals its ultimate bearing stress) and the state of nonultimate equilibrium(the bearing stress in the coal-mass is less than its ultimate bearing stress). To analyze the bearing characteristics of a coal pillar in the state of limit equilibrium and guide the design of pillar width, we established a mechanical analytical model of the non-ultimate equilibrium zone in the coal-mass on the goaf-side combined with the limit equilibrium theory as well as adopting the methods of theory analysis and mechanical analysis based on the assumption of a state of non-ultimate equilibrium. The width correction coefficient of the limit equilibrium zone has been given. The influence of mining depth, stress concentration coefficient of the surrounding rock, the non-limit strength of the coal-mass and stability of the coal rock interface has been studied. On this basis, we have confirmed that when the width of a longwall mining face roadway protection coal pillar is between 11.6 m and 13.16 m in No. 4 coal seam of Xinrui coal mine in Lvliang in Shanxi province the elastic core region in the coal pillar can be assured and the roadway will be located in the area of lower stress which is outside the peak stress. So the revised width of the limit equilibrium zone is more practical.展开更多
In order to safely exploit coal resource, protection coal pillars must be prepared in coal mines. Some correlative parameters of protection coal pillar are calculated by Drop face and Drop line methods. Models of prot...In order to safely exploit coal resource, protection coal pillars must be prepared in coal mines. Some correlative parameters of protection coal pillar are calculated by Drop face and Drop line methods. Models of protecting surface objects and coal pillars are established by TIN modeling and object-oriented technique. By using ACCESS2000as the database and the VC++ and OpenGL as the language, the calculation of protective coal pillars is realized and the 3D-visulizaiton system for protected objects on ground surface and for coal pillars is developed. The system can obtain the data of characteristic points on the surface interactively from the digitized mine topography map, constructing 3D model automatically. It can also obtain the interrelated parameters of the coal seam and drill hole data from existing geological surveying database to calculate the location, surface area and the total coal columns. The whole process can be computed quickly and accurately. And the 3D visualization system was applied in a mine, showing that the system solve the problem of complex calculation,not only realized the automatic 3D mapping and visualization of coal pillars for buildings protection , but also greatly improves the working efficiency.展开更多
Mine Plant 2 is a part of the Ostrava-Karvina Coal District (OKD) that is located in the Czech part of the Upper Silesian Basin. The first coal was exhausted from Mine Plant 2 in 1968. The most used method of mining s...Mine Plant 2 is a part of the Ostrava-Karvina Coal District (OKD) that is located in the Czech part of the Upper Silesian Basin. The first coal was exhausted from Mine Plant 2 in 1968. The most used method of mining so far in this area has been strike longwall mining with controlled caving. Due to extensive changes in the surface, which occur as a consequence of deep mining by the method of longwall mining with controlled caving, it is not possible to use this method in densely populated areas. At the present time, therefore, the trial operation of a new mining method called room and pillar is carried out. The method was chosen with the aim to minimize subsidence and deformations of the surface. The room and pillar mining method has never been used before in the conditions of the OKR, therefore it is necessary to prove the real effect of mining by this method on the surface. For this purpose, a surface observation station was designed, consisting of 36 surface points. The position and height of all points of the observation station is determined in stages three times a year.展开更多
基金supported by the National Programs for Fundamental Research and Development (No. 2013CB227900)the National Natural Science Foundation of China (Nos. 51204166, 51174195 and 51474209)the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
文摘There are two states for the coal-mass on the goaf-side which is in stress equilibrium: the state of limit equilibrium(the bearing stress in the coal-mass equals its ultimate bearing stress) and the state of nonultimate equilibrium(the bearing stress in the coal-mass is less than its ultimate bearing stress). To analyze the bearing characteristics of a coal pillar in the state of limit equilibrium and guide the design of pillar width, we established a mechanical analytical model of the non-ultimate equilibrium zone in the coal-mass on the goaf-side combined with the limit equilibrium theory as well as adopting the methods of theory analysis and mechanical analysis based on the assumption of a state of non-ultimate equilibrium. The width correction coefficient of the limit equilibrium zone has been given. The influence of mining depth, stress concentration coefficient of the surrounding rock, the non-limit strength of the coal-mass and stability of the coal rock interface has been studied. On this basis, we have confirmed that when the width of a longwall mining face roadway protection coal pillar is between 11.6 m and 13.16 m in No. 4 coal seam of Xinrui coal mine in Lvliang in Shanxi province the elastic core region in the coal pillar can be assured and the roadway will be located in the area of lower stress which is outside the peak stress. So the revised width of the limit equilibrium zone is more practical.
基金Projects 59904001 supported by National Natural Science Foundation of China
文摘In order to safely exploit coal resource, protection coal pillars must be prepared in coal mines. Some correlative parameters of protection coal pillar are calculated by Drop face and Drop line methods. Models of protecting surface objects and coal pillars are established by TIN modeling and object-oriented technique. By using ACCESS2000as the database and the VC++ and OpenGL as the language, the calculation of protective coal pillars is realized and the 3D-visulizaiton system for protected objects on ground surface and for coal pillars is developed. The system can obtain the data of characteristic points on the surface interactively from the digitized mine topography map, constructing 3D model automatically. It can also obtain the interrelated parameters of the coal seam and drill hole data from existing geological surveying database to calculate the location, surface area and the total coal columns. The whole process can be computed quickly and accurately. And the 3D visualization system was applied in a mine, showing that the system solve the problem of complex calculation,not only realized the automatic 3D mapping and visualization of coal pillars for buildings protection , but also greatly improves the working efficiency.
文摘Mine Plant 2 is a part of the Ostrava-Karvina Coal District (OKD) that is located in the Czech part of the Upper Silesian Basin. The first coal was exhausted from Mine Plant 2 in 1968. The most used method of mining so far in this area has been strike longwall mining with controlled caving. Due to extensive changes in the surface, which occur as a consequence of deep mining by the method of longwall mining with controlled caving, it is not possible to use this method in densely populated areas. At the present time, therefore, the trial operation of a new mining method called room and pillar is carried out. The method was chosen with the aim to minimize subsidence and deformations of the surface. The room and pillar mining method has never been used before in the conditions of the OKR, therefore it is necessary to prove the real effect of mining by this method on the surface. For this purpose, a surface observation station was designed, consisting of 36 surface points. The position and height of all points of the observation station is determined in stages three times a year.