This paper addresses the problem of assessing and optimizing the acoustic positioning system for underwater target localization with range measurement.We present a new three-dimensional assessment model to evaluate th...This paper addresses the problem of assessing and optimizing the acoustic positioning system for underwater target localization with range measurement.We present a new three-dimensional assessment model to evaluate the optimal geometric beacon formation whether meets user requirements.For mathematical tractability,it is assumed that the measurements of the range between the target and beacons are corrupted with white Gaussian noise with variance,which is distance-dependent.Then,the relationship between DOP parameters and positioning accuracy can be derived by adopting dilution of precision(DOP)parameters in the assessment model.In addition,the optimal geometric beacon formation yielding the best performance can be achieved via minimizing the values of geometric dilution of precision(GDOP)in the case where the target position is known and fixed.Next,in order to ensure that the estimated positioning accuracy on the region of interest satisfies the precision required by the user,geometric positioning accuracy(GPA),horizontal positioning accuracy(HPA)and vertical positioning accuracy(VPA)are utilized to assess the optimal geometric beacon formation.Simulation examples are designed to illustrate the exactness of the conclusion.Unlike other work that only uses GDOP to optimize the formation and cannot assess the performance of the specified size,this new three-dimensional assessment model can evaluate the optimal geometric beacon formation for each dimension of any point in three-dimensional space,which can provide guidance to optimize the performance of each specified dimension.展开更多
With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing...With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing numerical simulation methods in representing fractured- vuggy carbonate reservoirs makes numerical simulation difficult to characterize the fluid flow in these reservoirs. In this paper, based on a geological example unit in the Tahe Oilfield, a three-dimensional physical model was designed and constructed to simulate fluid flow in a fractured-vuggy reservoir according to similarity criteria. The model was validated by simulating a bottom water drive reservoir, and then subsequent water injection modes were optimized. These were continuous （constant rate）, intermittent, and pulsed injection of water. Experimental results reveal that due to the unbalanced formation pressure caused by pulsed water injection, the swept volume was expanded and consequently the highest oil recovery increment was achieved. Similar to continuous water injection, intermit- tent injection was influenced by factors including the connectivity of the fractured-vuggy reservoir, well depth, and the injection-production relationship, which led to a relative low oil recovery. This study may provide a constructive guide to field production and for the devel- opment of the commercial numerical models specialized for fractured-vuggy carbonate reservoirs.展开更多
Through the study of mutual process between groundwater systems and eco-environmental water demand, the eco-environmental water demand is brought into groundwater systems model as the important water consumption item ...Through the study of mutual process between groundwater systems and eco-environmental water demand, the eco-environmental water demand is brought into groundwater systems model as the important water consumption item and unification of groundwater抯 economic, environmental and ecological functions were taken into account. Based on eco-environmental water demand at Da抋n in Jilin province, a three-dimensional simulation and optimized management model of groundwater systems was established. All water balance components of groundwater systems in 1998 and 1999 were simulated with this model and the best optimal exploitation scheme of groundwater systems in 2000 was determined, so that groundwater resource was efficiently utilized and good economic, ecologic and social benefits were obtained.展开更多
The humic acid（HA） sample obtained from the alluvial soil was characterized by elemental composition, pyrolysis gas chromatography-mass spectrometry（Py-GC-MS） and solid-state 13C nuclear magnetic resonance （13C ...The humic acid（HA） sample obtained from the alluvial soil was characterized by elemental composition, pyrolysis gas chromatography-mass spectrometry（Py-GC-MS） and solid-state 13C nuclear magnetic resonance （13C NMR） spectroscopy. There is high fat content and a few nitrogen-containing functional groups in HA. Py-GC-MS demonstrates the characterization and structural identification of HA. One long list of identified pyrolysis products was proposed for the construction of conceptual model of HA. Solid-state 13C NMR data indicate there are higher values of alkyl-C, O-alkyl-C and aryl-C in HA. The elemental composition, structural carbon distribution and L3C NMR spectroscopy of simulated HA are consistent with those of experimental HA. HyperChem was used to simulate the three-dimensional molecular structure of the monomer, which was optimized by the molecular mechanics of the optimized potential for liquid simulations（OPLS） force field and molecular dynamics simulation to get the stable and balanced conformation. The deprotonation process study depicts that the degree of ionization of HA gets deeper, while the electronegativity of HA and the energy of van der Waals（vdW） increase. Moreover, the 3D structure of humic acid with -4 charges is the most stable. The deprotonation process is an endothermic process.展开更多
为综合解决考虑自重影响和屈曲约束的结构拓扑优化问题,提出一种新的拓扑优化设计方法。首先,针对优化过程中低密度区域的伪屈曲模态问题和自重引起的寄生效应问题,同时为了减少计算量,提出了改进的材料惩罚模型,并引入伪屈曲模态的识...为综合解决考虑自重影响和屈曲约束的结构拓扑优化问题,提出一种新的拓扑优化设计方法。首先,针对优化过程中低密度区域的伪屈曲模态问题和自重引起的寄生效应问题,同时为了减少计算量,提出了改进的材料惩罚模型,并引入伪屈曲模态的识别和删除措施。其次,为克服常规应力单元的应力刚化问题,采用混合应力单元对结构应力进行了精确评估。基于密度过滤及Heaviside三场映射方案,建立了目标函数为考虑自重影响的结构柔顺度最小、满足屈曲和体积主动约束的拓扑优化模型。利用伴随变量法对屈曲约束的灵敏度进行了推导,并采用移动渐近线(method of moving asymptotes,MMA)算法对模型进行了优化求解。最后,通过算例说明了本研究方法的正确性和可行性。展开更多
基金This work was supported by Natural Science Foundation of Hainan Province of China(No.117212)National Natural Science Foundation of China(Nos.61633008,61374007,61601262 and 61701487)Natural Science Foundation of Heilongjiang Province of China(No.F2017005)and China Scholarship Council.
文摘This paper addresses the problem of assessing and optimizing the acoustic positioning system for underwater target localization with range measurement.We present a new three-dimensional assessment model to evaluate the optimal geometric beacon formation whether meets user requirements.For mathematical tractability,it is assumed that the measurements of the range between the target and beacons are corrupted with white Gaussian noise with variance,which is distance-dependent.Then,the relationship between DOP parameters and positioning accuracy can be derived by adopting dilution of precision(DOP)parameters in the assessment model.In addition,the optimal geometric beacon formation yielding the best performance can be achieved via minimizing the values of geometric dilution of precision(GDOP)in the case where the target position is known and fixed.Next,in order to ensure that the estimated positioning accuracy on the region of interest satisfies the precision required by the user,geometric positioning accuracy(GPA),horizontal positioning accuracy(HPA)and vertical positioning accuracy(VPA)are utilized to assess the optimal geometric beacon formation.Simulation examples are designed to illustrate the exactness of the conclusion.Unlike other work that only uses GDOP to optimize the formation and cannot assess the performance of the specified size,this new three-dimensional assessment model can evaluate the optimal geometric beacon formation for each dimension of any point in three-dimensional space,which can provide guidance to optimize the performance of each specified dimension.
基金supported by China National Science and Technology Major Project(2011ZX05009-004,2011ZX05014-003)National Key Basic Research and Development Program(973 Program),China(2011CB201006)Science Foundation of China University of Petroleum,Beijing(2462014YJRC053)
文摘With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing numerical simulation methods in representing fractured- vuggy carbonate reservoirs makes numerical simulation difficult to characterize the fluid flow in these reservoirs. In this paper, based on a geological example unit in the Tahe Oilfield, a three-dimensional physical model was designed and constructed to simulate fluid flow in a fractured-vuggy reservoir according to similarity criteria. The model was validated by simulating a bottom water drive reservoir, and then subsequent water injection modes were optimized. These were continuous （constant rate）, intermittent, and pulsed injection of water. Experimental results reveal that due to the unbalanced formation pressure caused by pulsed water injection, the swept volume was expanded and consequently the highest oil recovery increment was achieved. Similar to continuous water injection, intermit- tent injection was influenced by factors including the connectivity of the fractured-vuggy reservoir, well depth, and the injection-production relationship, which led to a relative low oil recovery. This study may provide a constructive guide to field production and for the devel- opment of the commercial numerical models specialized for fractured-vuggy carbonate reservoirs.
基金The Key Project of the National Ninth-Five-Year Plan No. 96-004-02-09The 48Project of Ministry of Water Resources No. 985106The Project of Chinese Academy of Sciences
文摘Through the study of mutual process between groundwater systems and eco-environmental water demand, the eco-environmental water demand is brought into groundwater systems model as the important water consumption item and unification of groundwater抯 economic, environmental and ecological functions were taken into account. Based on eco-environmental water demand at Da抋n in Jilin province, a three-dimensional simulation and optimized management model of groundwater systems was established. All water balance components of groundwater systems in 1998 and 1999 were simulated with this model and the best optimal exploitation scheme of groundwater systems in 2000 was determined, so that groundwater resource was efficiently utilized and good economic, ecologic and social benefits were obtained.
基金the National Natural Science Foundation of China
文摘The humic acid（HA） sample obtained from the alluvial soil was characterized by elemental composition, pyrolysis gas chromatography-mass spectrometry（Py-GC-MS） and solid-state 13C nuclear magnetic resonance （13C NMR） spectroscopy. There is high fat content and a few nitrogen-containing functional groups in HA. Py-GC-MS demonstrates the characterization and structural identification of HA. One long list of identified pyrolysis products was proposed for the construction of conceptual model of HA. Solid-state 13C NMR data indicate there are higher values of alkyl-C, O-alkyl-C and aryl-C in HA. The elemental composition, structural carbon distribution and L3C NMR spectroscopy of simulated HA are consistent with those of experimental HA. HyperChem was used to simulate the three-dimensional molecular structure of the monomer, which was optimized by the molecular mechanics of the optimized potential for liquid simulations（OPLS） force field and molecular dynamics simulation to get the stable and balanced conformation. The deprotonation process study depicts that the degree of ionization of HA gets deeper, while the electronegativity of HA and the energy of van der Waals（vdW） increase. Moreover, the 3D structure of humic acid with -4 charges is the most stable. The deprotonation process is an endothermic process.
文摘为综合解决考虑自重影响和屈曲约束的结构拓扑优化问题,提出一种新的拓扑优化设计方法。首先,针对优化过程中低密度区域的伪屈曲模态问题和自重引起的寄生效应问题,同时为了减少计算量,提出了改进的材料惩罚模型,并引入伪屈曲模态的识别和删除措施。其次,为克服常规应力单元的应力刚化问题,采用混合应力单元对结构应力进行了精确评估。基于密度过滤及Heaviside三场映射方案,建立了目标函数为考虑自重影响的结构柔顺度最小、满足屈曲和体积主动约束的拓扑优化模型。利用伴随变量法对屈曲约束的灵敏度进行了推导,并采用移动渐近线(method of moving asymptotes,MMA)算法对模型进行了优化求解。最后,通过算例说明了本研究方法的正确性和可行性。
