基于零电压注入的航空电驱动用永磁电机系统零低速无位置传感器控制

针对航空电驱动系统零低速域高性能无位置传感器控制算法的需求,本文提出了一种基于零电压注入的无位置传感器控制策略。首先,针对传统高频注入法的高频噪声问题,引入随机高频信号代替传统信号,在估计的d轴中激励出与位置相关的响应电流。随后,对传统信号及随机高频信号的噪声产生与抑制机理进行理论分析;进一步分析死区效应对位置观测的影响,在随机高频信号注入基础上,额外注入零电压矢量,并设计死区补偿策略以抑制由死区效应所引起的位置观测误差。最后,通过MATLAB/Simulink验证了所提出无位置传感器控制策略的有效性。本文所提出的算法可实现零低速域的低噪声低谐波无位置传感器控制,对航空电驱动系统控制策略的设计具有参考价值。

Sensorless Control of IPMSM for Last 10 Years and Next 5 Years

This paper presents the developments of sensorless control of interior permanent magnet synchronous machine(IPMSM)for last 10 years,which could be divided into the past and the present for each 5 years.Several popular methods developed for last 10 years would be described and evaluated,and the limitations with the methods are discussed.In the past a concept extended EMF(EEMF)was introduced and it can model IPMSM as a non-salient motor,meaning that the representation of IPMSM in the estimated rotor reference frame would be much simpler and accurate.However,because it still relied on back EMF,standstill operation was impossible.And,the position control of IPMSM could not be achieved with EEMF concept.For sensorless drive,the high-frequency signal injection method exploiting inherent saliency of IPMSM has been continuously developed for last 10 years and applied to various industry fields,where torque control at standstill is essential.Its performance has been improved but there are still many problems to be solved.In the present,the square-wave signal injection at estimated d-axis has improved the control performance conspicuously.However,there are strong demands to improve the control performance of sensorless drive,yet.Based on the problems in the present,in this paper the possible developments of sensorless drive of IPMSM in next 5 years are enlightened as the future of sensorless control.

An MRAS method for sensorless control of induction motor over a wide speed range

This paper addresses the problem of wide speed range sensorless control of induction motor.The proposed method is based on model reference adaptive system (MRAS),in which the current model serves as the adjustable model,and a novel hybrid model integrating the modified voltage model (MVM) and high-frequency signal injection method (HFSIM) are established to serve as the reference model.The HFSIM works together with MVM to improve the performance of the rotor speed and rotor flux position estimation at low speed,whereas at high speed,the MVM acts alone.In addition,a rotor resistance online estimation scheme is proposed to update the rotor resistance contained in the adjustable model and to ensure the estimation accuracy further.Experimental results show that the proposed MRAS method is very effective from low to high speed range,including zero speed.

Sensorless Control of Permanent Magnet Synchronous Motor in Full Speed Range

Aiming at resolving the limitation of the speed regulation range of sensorless control technology,a new composite sensorless control strategy is proposed to realize a control method for a permanent magnet synchronous motor(PMSM)in full speed range.In the medium-and high-speed range,the improved new sliding mode observer method is used to estimate the motor speed and rotor position information.In the zero and low speed range,in order to avoid the defects of the sliding mode method,the rotating high-frequency voltage signal injection method is used.When switching between low,medium,and high speed,the fuzzy control algorithm is adopted to achieve smooth transitions.The simulation experiment results show that the hybrid mode combining the sliding mode observer and rotating high-frequency voltage injection methods,can effectively reduce the jitter in the algorithm switching process,and realize the smooth control of a PMSM in full speed range.

Saliency-Based Position Sensorless Control Methods for PMSM Drives-a Review

Permanent magnet synchronous motor(PMSM)drives are finding expanded use for industrial and domestic drive applications.With the distinguished characteristics such as reduced cost and increased reliability and robustness,position sensorless(self-sensing)control techniques have been good candidates for reliable and costless PMSM drives.The saliency-tracking based techniques further bring the expansion of applications with the extended controllable sensorless operating speed range.This paper presents a review on state of the art techniques for position sensorless drives using the saliency-tracking based methods.The signal injection methods and the future scope of research including the dynamic bandwidth improvement and the acoustic noise reduction are discussed.