期刊文献+
共找到11,623篇文章
< 1 2 250 >
每页显示 20 50 100
Z-shaped incision without epithelial resection in pterygium surgery
1
作者 Satoru Kase Shinki Chin Susumu Ishida 《International Journal of Ophthalmology(English edition)》 SCIE CAS 2024年第7期1262-1266,共5页
AIM:To introduce a novel surgical technique using a Z-shaped incision without epithelial resection in ophthalmic pterygia.METHODS:This was a prospective study.During pterygium surgery,all proliferative tissues were se... AIM:To introduce a novel surgical technique using a Z-shaped incision without epithelial resection in ophthalmic pterygia.METHODS:This was a prospective study.During pterygium surgery,all proliferative tissues were separated from the cornea and conjunctiva without resection of the tissues.The unaffected conjunctiva was incised in a Z-shape.The upper(or lower)conjunctival flap was sutured to the lower(or upper)normal conjunctiva on the limbal sclera,while the proliferative tissue was sutured to the upper conjunctiva(or lower)near the fornix.RESULTS:Ten patients with pterygia were eligible for this study.Eight patients with primary pterygia and 2 with recurrent pterygia were included.The age of patients at surgery ranged from 47 to 90y(average:71.9y).Five patients each showed right and left-sided pterygia.The postoperative follow-up periods were from 8 to 78mo(average:25.0mo).The surgery was successfully conducted and wounds were favorably reconstructed in all patients.The proliferative tissues sutured to the normal conjunctiva showed palor and attenuated neovessles,and never showed re-growth after surgery.Nine patients did not show recerrence.Recerrent pterygium was noted in 1 patient,but additional treatments were not required.CONCLUSION:The procedure involves the reconstruction of pterygial tissue and normal conjunctiva using a Z-shaped incision.The scleral limbal wound can be covered with nonaffected conjunctiva without any excision of conjunctival epithelia in patients with primary or recurrent pterygia. 展开更多
关键词 pterygium surgery Z-shape non-resection
下载PDF
Intermittent sliding-lock-knot suture for limbal conjunctival autograft fixation in pterygium surgery:a technique note
2
作者 Ling Zhang Run-Hua Lyu +3 位作者 Jing-Ru Wang Wen-Jian Shi Feng Zheng Ying-Ying Gao 《International Journal of Ophthalmology(English edition)》 SCIE CAS 2024年第5期838-844,共7页
AIM:To report a technique used with intermittent slidinglock-knot(ISLK)fixation for limbal conjunctival autografts in pterygium surgery and compared with those of routine intermittent(RI)fixation.METHODS:Consecutive p... AIM:To report a technique used with intermittent slidinglock-knot(ISLK)fixation for limbal conjunctival autografts in pterygium surgery and compared with those of routine intermittent(RI)fixation.METHODS:Consecutive patients with primary pterygium who had undergone pterygium excision combined with limbal conjunctival autograft transplantation between March 2021 and March 2022 at our institute were retrospectively analyzed.Primary outcome measures were mean duration of surgery and suture removal,degree of conjunctival hyperemia on postoperative day 1,pain score at suture removal,postoperative symptoms at 6mo,including conjunctival hyperemia,foreign body sensation,and graft stability.RESULTS:Ninety-eight patients underwent monocular surgery and were divided into ISLK(51 eyes)and RI(47 eyes)groups according to the type of conjunctiva autograft fixation method planned.There was no significant difference in mean duration of surgery between the two groups(18.59±2.39min vs 18.15±2.20min,P=0.417);however,compared to the RI group,shorter suture removal times were observed in the ISLK group[0.58min(0.42-0.87)vs 3.00min(2.21-4.15),P<0.001].The degree of conjunctival hyperemia on postoperative day 1 was milder in the ISLK group(P<0.001).Pain scores at suture removal were lower in the ISLK group than in RI group[1(0-3)vs 2(1-4),P<0.001].Postoperative symptoms at 6mo were comparable between the groups(P=0.487),with no recurrence.CONCLUSION:ISLK is an innovative method for limbal conjunctival autograft fixation after pterygium excision.Compared to RI fixation,ISLK facilitates suture removal and reduces discomfort,with comparable surgery duration and less conjunctival hyperemia. 展开更多
关键词 intermittent sliding-lock-knot fixation pterygium suture removal
下载PDF
小麦SUS基因家族鉴定与生物信息学分析
3
作者 孔斌雪 李娜 +5 位作者 马靖福 窦佳欣 陈涛 张沛沛 刘媛 杨德龙 《云南农业大学学报(自然科学版)》 CAS CSCD 北大核心 2024年第1期1-8,共8页
【目的】对小麦蔗糖合成酶(sucrose synthase,SUS)基因家族进行鉴定和生物信息学分析,为探究小麦SUS(TaSUS)基因家族的作用机制提供理论参考。【方法】采用生物信息学方法在小麦全基因组上鉴定TaSUS基因家族成员,并对其系统进化关系、... 【目的】对小麦蔗糖合成酶(sucrose synthase,SUS)基因家族进行鉴定和生物信息学分析,为探究小麦SUS(TaSUS)基因家族的作用机制提供理论参考。【方法】采用生物信息学方法在小麦全基因组上鉴定TaSUS基因家族成员,并对其系统进化关系、染色体位置、基因结构、保守结构域、启动子顺式作用元件和基因表达模式进行分析。【结果】在小麦基因组中共鉴定到分布于14条染色体上的24个TaSUS基因,可分为3个亚组。TaSUS基因含有多个外显子,但部分基因缺失非翻译区结构。TaSUS基因家族成员启动子区域包含45种顺式作用元件,涉及植物生长发育和逆境胁迫响应。大多数TaSUS基因在小麦穗中显著表达,在叶、茎和根中的相对表达量较低。【结论】研究结果有助于了解小麦SUS基因家族的进化,为后期小麦SUS基因家族的生物功能研究奠定理论基础。 展开更多
关键词 小麦 蔗糖合成酶(suS) 生物信息学分析 基因表达
下载PDF
SUS321不锈钢表面Cr/CrN涂层的制备与抗氧化及耐腐蚀研究
4
作者 张林嘉 卢婷 +2 位作者 李恒 李亚茹 许海龙 《热加工工艺》 北大核心 2024年第6期149-156,共8页
采用磁控溅射技术,在SUS321不锈钢表面制备Cr/Cr N涂层,利用扫描电子显微镜(SEM)、X射线衍射仪(XRD)及分析天平等分别表征样品高温氧化及酸性盐雾腐蚀实验后的微结构及增重。结果表明,当磁控溅射气体分压比为P_(Ar)/P_(N_(2))=3∶1的涂... 采用磁控溅射技术,在SUS321不锈钢表面制备Cr/Cr N涂层,利用扫描电子显微镜(SEM)、X射线衍射仪(XRD)及分析天平等分别表征样品高温氧化及酸性盐雾腐蚀实验后的微结构及增重。结果表明,当磁控溅射气体分压比为P_(Ar)/P_(N_(2))=3∶1的涂层样品抗氧化性能及耐腐蚀性能最佳。在此基础上通过循环沉积制备了多层Cr/CrN涂层,6周期涂层样品在600℃氧化200 h后的单位面积增重为3.599 g/m^(2),表面氧化膜致密,没有出现剥落现象;6周期的涂层样品在酸性盐雾环境中能够保持480 h表面无变化,在放置500 h后边缘部位才开始出现轻微锈迹。固定磁控溅射气体分压比为P_(Ar)/P_(N_(2))=3∶1时,制备的6周期Cr/CrN多层膜涂层具有最佳的抗氧化及耐酸性盐雾腐蚀性能。 展开更多
关键词 suS321不锈钢 磁控溅射 Cr/CrN涂层 抗氧化性能 耐腐蚀性能
下载PDF
Intelligent diagnostic model for pterygium by combining attention mechanism and MobileNetV2
5
作者 Mao-Nian Wu Kai He +5 位作者 Yi-Bei Yu Bo Zheng Shao-Jun Zhu Xiang-Qian Hong Wen-Qun Xi Zhe Zhang 《International Journal of Ophthalmology(English edition)》 SCIE CAS 2024年第7期1184-1192,共9页
AIM:To evaluate the application of an intelligent diagnostic model for pterygium.METHODS:For intelligent diagnosis of pterygium,the attention mechanisms—SENet,ECANet,CBAM,and Self-Attention—were fused with the light... AIM:To evaluate the application of an intelligent diagnostic model for pterygium.METHODS:For intelligent diagnosis of pterygium,the attention mechanisms—SENet,ECANet,CBAM,and Self-Attention—were fused with the lightweight MobileNetV2 model structure to construct a tri-classification model.The study used 1220 images of three types of anterior ocular segments of the pterygium provided by the Eye Hospital of Nanjing Medical University.Conventional classification models—VGG16,ResNet50,MobileNetV2,and EfficientNetB7—were trained on the same dataset for comparison.To evaluate model performance in terms of accuracy,Kappa value,test time,sensitivity,specificity,the area under curve(AUC),and visual heat map,470 test images of the anterior segment of the pterygium were used.RESULTS:The accuracy of the MobileNetV2+Self-Attention model with 281 MB in model size was 92.77%,and the Kappa value of the model was 88.92%.The testing time using the model was 9ms/image in the server and 138ms/image in the local computer.The sensitivity,specificity,and AUC for the diagnosis of pterygium using normal anterior segment images were 99.47%,100%,and 100%,respectively;using anterior segment images in the observation period were 88.30%,95.32%,and 96.70%,respectively;and using the anterior segment images in the surgery period were 88.18%,94.44%,and 97.30%,respectively.CONCLUSION:The developed model is lightweight and can be used not only for detection but also for assessing the severity of pterygium. 展开更多
关键词 deep learning attention mechanism pterygium intelligent diagnosis
下载PDF
厚壁SUS321焊接工艺研究
6
作者 李晓峰 黄超 《锅炉制造》 2024年第1期46-49,共4页
SUS321是含有稳定化元素Ti的奥氏体型不锈钢,在锅炉和石化容器产品中有着广泛应用。厚壁SUS321在应用中较为少见,其埋弧焊焊接工艺的应用及厚壁条件下的试板成形需要经过验证,其各项性能也需得到保证。通过焊接工艺试验,对厚壁SUS321不... SUS321是含有稳定化元素Ti的奥氏体型不锈钢,在锅炉和石化容器产品中有着广泛应用。厚壁SUS321在应用中较为少见,其埋弧焊焊接工艺的应用及厚壁条件下的试板成形需要经过验证,其各项性能也需得到保证。通过焊接工艺试验,对厚壁SUS321不锈钢试板进行工艺性检验,并对试板进行力学性能、微观组织等检验。最终证明用于厚壁SUS321国产埋弧焊焊丝工艺性良好,各项性能均满足使用要求。 展开更多
关键词 不锈钢埋弧焊 suS321 焊接工艺试验
下载PDF
SUS430LX冷弯裂纹缺陷分析与控制
7
作者 程云霞 《甘肃冶金》 2024年第2期100-104,共5页
冷弯开裂是一种材料加工性能类缺陷,针对SUS430LX冷弯开裂缺陷,采用扫描电镜和能谱分析检测了冷弯部位及基体析出相情况。从检测分析结果来看,析出相是引起冷弯开裂的主要原因。围绕断面不同位置析出相的特点,对影响析出相尺寸、数量及... 冷弯开裂是一种材料加工性能类缺陷,针对SUS430LX冷弯开裂缺陷,采用扫描电镜和能谱分析检测了冷弯部位及基体析出相情况。从检测分析结果来看,析出相是引起冷弯开裂的主要原因。围绕断面不同位置析出相的特点,对影响析出相尺寸、数量及类型的主要因素进行了讨论,并提出优化方向。 展开更多
关键词 suS430LX 冷弯开裂 析出相 析出顺序 冷却强度
下载PDF
从小米SU7爆火看雷军十八般营销武艺
8
作者 张少辉 《企业管理》 2024年第5期67-70,共4页
近日,小米汽车SU7重磅发布,根据小米汽车官方信息,4分钟内完成大定10000辆,27分钟实现50000辆,24小时达88898辆。小米汽车旗开得胜,它像鲶鱼一样,无形中搅动了新能源汽车市场。雷军的营销能力有目共睹,这一仗让他再创辉煌。小米汽车面... 近日,小米汽车SU7重磅发布,根据小米汽车官方信息,4分钟内完成大定10000辆,27分钟实现50000辆,24小时达88898辆。小米汽车旗开得胜,它像鲶鱼一样,无形中搅动了新能源汽车市场。雷军的营销能力有目共睹,这一仗让他再创辉煌。小米汽车面世用到了18个经典营销原理,其具体做法对营销人员具有借鉴意义。 展开更多
关键词 小米汽车 su7 雷军 营销理论 客户思维
下载PDF
日本SUS630不锈钢洁净度分析
9
作者 陈炜 《特钢技术》 CAS 2024年第2期37-41,共5页
本文对日本某钢厂模铸生产的两种传感器用SUS630不锈钢进行了洁净度分析。结果表明:SUS630不锈钢棒材中夹杂物类型主要为氧化物O-Al-Ca-Mg,少部分夹杂物为O-Al-Ca-Mg-S;SUS630不锈钢板材中夹杂物类型主要为氧化物O-Mg-Al-Si-Mn,少部分... 本文对日本某钢厂模铸生产的两种传感器用SUS630不锈钢进行了洁净度分析。结果表明:SUS630不锈钢棒材中夹杂物类型主要为氧化物O-Al-Ca-Mg,少部分夹杂物为O-Al-Ca-Mg-S;SUS630不锈钢板材中夹杂物类型主要为氧化物O-Mg-Al-Si-Mn,少部分夹杂物为O-Mn-Al-Si-Ti、O-Mn-Si-Al-Ca;它们的夹杂物形貌均为球形或近球形。棒材、板材中夹杂物密度、平均等效直径、面积占比分别为:26/mm^(2)、3.1μm、0.024%,以及:29/mm^(2)、2.3μm、0.013%;棒材的夹杂物评级结果为细系B1.0、细系D1.0,板材的夹杂物评级结果为细系B0.5、细系D1.0,两材料的洁净度整体控制水平较高;此外,钢中还存在超细微Nb(C,N)夹杂物。 展开更多
关键词 suS630不锈钢 夹杂物 洁净度 Nb(C N)
下载PDF
SUS441不锈钢/Al金属间化合物微叠层复合板的界面结构与力学性能
10
作者 黄蔚泓 袁文铮 +4 位作者 吴宇星 刘淳熙 满达 魏振雄 祖国胤 《有色金属材料与工程》 CAS 2024年第1期59-65,共7页
采用“表面预处理—交替层叠—热轧复合—热处理”的工艺流程制备了SUS441不锈钢/Al金属间化合物微叠层复合板。利用光学显微镜、X射线衍射仪、扫描电子显微镜等检测与表征方法研究了热处理温度对复合板界面形貌、微观组织、物相组成、... 采用“表面预处理—交替层叠—热轧复合—热处理”的工艺流程制备了SUS441不锈钢/Al金属间化合物微叠层复合板。利用光学显微镜、X射线衍射仪、扫描电子显微镜等检测与表征方法研究了热处理温度对复合板界面形貌、微观组织、物相组成、维氏硬度、拉伸性能的影响。结果表明:复合板界面结合良好;热处理后,固–液反应界面氧化严重,易导致界面分层而开裂;固–固、固–半固、固–液热处理后,金属间化合物层由均匀层和两相层组成,均匀层的物相组成为Fe_(2)A_(15),两相层的物相组成为Fe_(4)Al_(13)和Al_(13)Cr_(2),且两相层具有韧性特征,固–半固反应所得到的复合板的综合力学性能最佳。 展开更多
关键词 suS441不锈钢/Al 微叠层复合板 热轧复合 合金化 界面
下载PDF
Calculation of the Standard Model Parameters and Particles Based on a SU(4) Preon Model
11
作者 Jan Helm 《Journal of Modern Physics》 2024年第1期64-124,共61页
This paper describes an extension and a new foundation of the Standard Model of particle physics based on a SU(4)-force called hyper-color, and on preon subparticles. The hyper-color force is a generalization of the S... This paper describes an extension and a new foundation of the Standard Model of particle physics based on a SU(4)-force called hyper-color, and on preon subparticles. The hyper-color force is a generalization of the SU(2)-based weak interaction and the SU(1)-based right-chiral self-interaction, in which the W-and the Z-bosons are Yukawa residual-field-carriers of the hyper-color force, in the same sense as the pions are the residual-field-carriers of the color SU(3) interaction. Using the method of numerical minimization of the SU(4)-action based on this model, the masses and the inner structure of leptons, quarks and weak bosons are calculated: the mass results are very close to the experimental values. We calculate also precisely the value of the Cabibbo angle, so the mixing matrices of the Standard model, CKM matrix for quarks and PMNS matrix for neutrinos can also be calculated. In total, we reduce the 29 parameters of the Standard Model to a total of 7 parameters. 展开更多
关键词 su(4) Generalization of Weak Interaction Extension of Standard Model Numerical Minimization of Action Hyper-Color Preon
下载PDF
SUS430/Q355/SUS430不锈钢-碳钢复合板非真空试制开发
12
作者 唐东 王宝君 《甘肃冶金》 2024年第3期114-117,共4页
利用松下YC-400TX电焊机、Φ450 mm热轧实验机组等设备试制开发SUS430/Q355/SUS430不锈钢-碳钢非真空复合钢板,并对其进行了宏观低倍、微观金相组织、复合处元素扩散以及力学性能等检测分析。结果表明:SUS430/Q355/SUS430非真空热轧复... 利用松下YC-400TX电焊机、Φ450 mm热轧实验机组等设备试制开发SUS430/Q355/SUS430不锈钢-碳钢非真空复合钢板,并对其进行了宏观低倍、微观金相组织、复合处元素扩散以及力学性能等检测分析。结果表明:SUS430/Q355/SUS430非真空热轧复合钢板结合强度好,生产工艺合理,并对试制过程易出现的问题提出了改进措施。 展开更多
关键词 suS430/Q355/suS430 不锈钢-碳钢 热轧 复合板 非真空
下载PDF
小米SU7动力电池系统剖析
13
作者 刘晓明 徐东静 《汽车维修技师》 2024年第13期37-40,共4页
一、规格(1)小米SU7 700km后驱长续航智驾版和700km后驱标准创始版为弗迪磷酸铁锂73.6k W·h刀片电池(如表1所示)。(2)小米SU7 830km后驱超长续航高阶智驾Pro版为宁德时代磷酸铁锂94.3k W·h神行电池(如表2所示)。(3)小米SU780... 一、规格(1)小米SU7 700km后驱长续航智驾版和700km后驱标准创始版为弗迪磷酸铁锂73.6k W·h刀片电池(如表1所示)。(2)小米SU7 830km后驱超长续航高阶智驾Pro版为宁德时代磷酸铁锂94.3k W·h神行电池(如表2所示)。(3)小米SU7800km四驱超长续航高阶智驾Max和小米SU7750km四驱Max创始版为宁德时代三元锂101k W·h麒麟电池(如表3所示)。 展开更多
关键词 磷酸铁锂 小米 四驱 su 宁德
下载PDF
被围剿的SU7,小米造车的三张牌
14
作者 王迪 《世界汽车》 2024年第4期50-51,共2页
小米SU7上市。2024年开年这几个月的时间里,中国汽车市场发生了翻天覆地的变化,小米能否三年磨一剑,在造车领域站稳脚跟?3月28日,雷军宣布小米SU7正式上市。人们等待小米的这款新车已经很久了。早在2023年12月的小米汽车技术发布会上,... 小米SU7上市。2024年开年这几个月的时间里,中国汽车市场发生了翻天覆地的变化,小米能否三年磨一剑,在造车领域站稳脚跟?3月28日,雷军宣布小米SU7正式上市。人们等待小米的这款新车已经很久了。早在2023年12月的小米汽车技术发布会上,雷军就曾公布过SU7的外观与部分性能,然而直到今年3月,正式的价格才姗姗来迟。不知道三年前雷军推动小米进入造车行业时,有没有想过小米的第一款车会如此“难产”。 展开更多
关键词 雷军 造车 小米 三年 su 发布会 中国汽车市场
下载PDF
Study on Traditional Architectural Decoration Patterns of Temple of the Three Sus
15
作者 Jieyi Jiang 《Journal of Architectural Research and Development》 2024年第3期162-171,共10页
Temple of the Three Sus,which was first established during the Yuan Dynasty,features a natural,unrestrained,and classically elegant garden architectural style.This paper discusses the multiple characteristics and mean... Temple of the Three Sus,which was first established during the Yuan Dynasty,features a natural,unrestrained,and classically elegant garden architectural style.This paper discusses the multiple characteristics and meanings of traditional architectural decorative patterns at Temple of the Three Sus from a semiotic perspective.First,it analyzes the denotative aspects of these patterns,including their stylistic forms,structural frameworks,and craftsmanship techniques.Second,the paper classifies the traditional architectural decorative patterns of the Temple of the Three Sus based on the types of sources of these patterns and interprets the implied meanings of each.Finally,the paper explores the application of these traditional decorative patterns in modern urban design,specifically in Meishan City,discussing the inheritance and innovation of these patterns in contemporary urban design and emphasizing the importance of integrating tradition with modernity. 展开更多
关键词 Temple of the Three sus Traditional architecture Decorative patterns Auspiciousness
下载PDF
小米SU7
16
《汽车观察》 2024年第3期54-54,共1页
售价:21.59万~29.99万元年轻人的第一辆保时米小米SU7车长4997mm、车宽1963mm、车高1440mm、轴距3000mm,超低风阻系数0.195,是一款标准的C级轿车。采用双层镀银的防晒隔热天幕,紫外线隔绝率达到99.9%,红外线隔绝率99.1%;小米SU7 Max双... 售价:21.59万~29.99万元年轻人的第一辆保时米小米SU7车长4997mm、车宽1963mm、车高1440mm、轴距3000mm,超低风阻系数0.195,是一款标准的C级轿车。采用双层镀银的防晒隔热天幕,紫外线隔绝率达到99.9%,红外线隔绝率99.1%;小米SU7 Max双电机、全轮驱动、800V碳化硅高压动力平台,673匹马力、838 N·m动力,零百加速时间2.78s。 展开更多
关键词 全轮驱动 风阻系数 双电机 动力平台 小米 红外线 su
下载PDF
小米汽车自带流量 小米SU7上市的营销套路
17
《产品可靠性报告》 2024年第5期21-23,共3页
随着新能源汽车市场的蓬勃发展,科技巨头们纷纷涉足汽车领域,竞相在这片充满机遇的蓝海中寻找自己的立足之地。在这一激烈的竞争中,小米汽车凭借其敏锐的市场洞察力和独特的营销策略,成功脱颖而出。特别是在2024年的北京车展上,小米汽... 随着新能源汽车市场的蓬勃发展,科技巨头们纷纷涉足汽车领域,竞相在这片充满机遇的蓝海中寻找自己的立足之地。在这一激烈的竞争中,小米汽车凭借其敏锐的市场洞察力和独特的营销策略,成功脱颖而出。特别是在2024年的北京车展上,小米汽车的首款车型——小米SU7,在展会上吸引了无数参观者的目光。 展开更多
关键词 市场洞察力 新能源汽车 营销策略 营销套路 小米 su 北京车展
下载PDF
雷军造车:小米SU7的三场战事
18
作者 杨继刚 《销售与市场》 2024年第6期74-78,共5页
雷军兑现承诺,小米SU7下场—一半是火焰,一半是海洋2024年3月28日19:00,小米SU7产品发布会在北京拉开帷幕。这一天,距离2021年3月30日“雷军官宣小米造车”整整过去1094天,雷军兑现了承诺。这场被雷军称为“押上自己全部身家”的“人生... 雷军兑现承诺,小米SU7下场—一半是火焰,一半是海洋2024年3月28日19:00,小米SU7产品发布会在北京拉开帷幕。这一天,距离2021年3月30日“雷军官宣小米造车”整整过去1094天,雷军兑现了承诺。这场被雷军称为“押上自己全部身家”的“人生最后一次创业”,终于开花结果。 展开更多
关键词 雷军 小米 造车 su 一次创业 发布会 兑现承诺 开花结果
下载PDF
双相不锈钢S31803与SUS316L焊接工艺研究及性能分析
19
作者 王兴伟 于志江 《现代制造技术与装备》 2024年第6期110-112,共3页
对双相不锈钢S31803与不锈钢SUS316L焊接工艺的优化及焊接接头性能进行分析。对双相不锈钢S31803和不锈钢SUS316L的特性与焊接难点等进行分析,对双相不锈钢S31803与不锈钢SUS316L的异种钢焊接工艺、焊接接头组织和性能进行实验,通过实... 对双相不锈钢S31803与不锈钢SUS316L焊接工艺的优化及焊接接头性能进行分析。对双相不锈钢S31803和不锈钢SUS316L的特性与焊接难点等进行分析,对双相不锈钢S31803与不锈钢SUS316L的异种钢焊接工艺、焊接接头组织和性能进行实验,通过实验验证和性能分析,得出关于双相不锈钢S31803与不锈钢SUS316L异种钢焊接工艺的结论和建议。 展开更多
关键词 双相不锈钢 S31803 suS316L 焊接工艺 焊接接头 力学性能 耐蚀性能
下载PDF
英飞凌与小米汽车达成协议,2027年前将向SU7供应先进功率半导体
20
《变频器世界》 2024年第5期34-34,共1页
5月6日消息,英飞凌科技股份公司今日宣布,将为小米SU7供应碳化硅HybridPACK Drive G2 CoolSiC TM功率模块及芯片产品直至2027年。英飞凌方面称,其为小米SU7Max供应两颗1200V HybridPACK Drive G2 CoolSiC模块,还为小米汽车供应满足不同... 5月6日消息,英飞凌科技股份公司今日宣布,将为小米SU7供应碳化硅HybridPACK Drive G2 CoolSiC TM功率模块及芯片产品直至2027年。英飞凌方面称,其为小米SU7Max供应两颗1200V HybridPACK Drive G2 CoolSiC模块,还为小米汽车供应满足不同需求的其它广泛产品,例如不同应用中的EiceDRIVERTM栅极驱动器和10款以上的微控制器。同时,两家公司还同意在碳化硅汽车应用领域开展进一步合作。 展开更多
关键词 功率半导体 英飞凌科技 芯片产品 功率模块 小米 应用领域 su 微控制器
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部