Inverter power supply system for high-power twin-wire pulsed GMAW

A type of novel inverter power supply system for high-power twin-wire pulsed gas metal arc welding （GMAW） is presented mainly for dealing with the disadvantages of the conventional power supply for twin-wire pulsed GMA W of which the output power is generally difficult to increase due to limitations of the power of semiconductors and the power density of magnetic devices. In the power supplies for the master and slave arcs, the digital signal processor （DSP） TMS320F28335 is used to form the DSP- based synergic control system for parallel high-power pulsed GMA W, which achieves high-power output of two parallel inverters controlled by a single DSP ; master-slave communication is achieved by using e controller area network （eCAN）module of DSP, thas realizing anti-phase pulse output of high-power twin-wire pulsed GMA W and reducing the interference between twin arcs. The experiment results demonstrate that the designed inverter power supply system for high-power twin-wire pulsed GMAW can bring about high-power efficiency of welding, stable welding process and proper formation of welds.

Arc light sensing of droplet transfer in pulsed GMAW process and its mechanism

A new method and if.''principle .fi)r 's*ensin.q dry)Plet iran.5/dr in aide W ')/ steel and aluminum alloy have been researched in this paper. A practical arc light sensing and controlling system has been developed. The reliability of the arc light characteristic signal that indicates droplet detachment and the control accuracy of the system have been verified using high-speed photography Based on the mathematical model set up in the paper, the mechanism of the signal and relative phenomena were analyzed The parameters, which influence arc light radiation were given and the limitation of this sensing method was discussed.

Effect of Welding Parameters on Dilution and Weld Bead Geometry in Cladding

The effect of pulsed gas metal arc welding （GMAW） variables on the dilution and weld bead geometry in cladding X65 pipeline steel with 316L stainless steel was studied. Using a full factorial method, a series of experiments were carried out to know the effect of wire feed rate, welding speed, distance between gas nozzle and plate, and the vertical angle of welding on dilution and weld bead geometry. The findings indicate that the dilution of weld metal and its dimension i.e. width, height and depth increase with the feed rate, but the contact angle of the bead decreases first and then increases. Meantime, welding speed has an opposite effect except for dilution. There is an interaction effect between welding parameters at the contact angle. The results also show forehand welding or decreasing electrode extension decrease the angle of contact. Finally, a mathematical model is contrived to highlight the relationship between welding variables with dilution and weld bead geometry.