A mathematical model is established on the basis of the physical characteristic of the negative resistance arc when a low current of 0—50 A is applied in pulsed TIG welding. The simulation model converted from the ma...A mathematical model is established on the basis of the physical characteristic of the negative resistance arc when a low current of 0—50 A is applied in pulsed TIG welding. The simulation model converted from the mathematical model is run in MATLAB environment, and the discussion is focused on the way the peak current ranging from 29 A to 50 A and the time constant of arc in the span of 0.003—0.006 s influence the simulating results and the dynamic characteristic. The simulating data are close to that of welding experiments and correspond to the theoretical conclusion.展开更多
The paper mainly focuses on the digital pulse width modulation (DPWM) control techniques for high performance power electronic circuit design. The problem to be solved in this study addresses the DPWM converter design...The paper mainly focuses on the digital pulse width modulation (DPWM) control techniques for high performance power electronic circuit design. The problem to be solved in this study addresses the DPWM converter design for DC to DC conversion process. The control techniques have been utilized the Fuzzy Logic Rules Base method for proposed SIMULINK model of high performance power electronic circuit. The analytical calculations for real circuit design have been completed based on the mathematical modeling of the system. The results from the developed SIMULINK model confirm the target specifications of the high performance condition for power electronic circuit which was met the objective of this study. The numerical results have been carried out with the help of MATLAB/SIMULINK.展开更多
Pulsed current Micro Plasma Arc Welding is used to joint thin sheets of AISI 304L sheets, which are used in manufacturing of metallic bellows and diaphragms. In this article the effects of pulsing current parameters o...Pulsed current Micro Plasma Arc Welding is used to joint thin sheets of AISI 304L sheets, which are used in manufacturing of metallic bellows and diaphragms. In this article the effects of pulsing current parameters on weld pool geometry namely front width, back width, front height and back height of pulsed current micro plasma arc welded AISI 304L stainless steel sheets was analyzed. Four factors, five levels, central composite design was used to develop mathematical models, incorporating pulsed current parameters and weld pool geometry. The mathematical models have been developed by Response Surface Method. The adequacy of the models was checked by ANOVA technique. Variation of output responses with input process variables are discussed. By using the developed mathematical models, weld pool geometry parameters can be predicted.展开更多
针对永磁直流无刷电机(brushless DC motor,BLDCM)转矩脉动问题,基于两相导通星形三相六状态工作方式的永磁直流无刷电机数学模型,提出了5种不同的常用PWM调制方式。详细分析了这5种PWM调制方式对电机换相转矩脉动的不同影响并相互比较...针对永磁直流无刷电机(brushless DC motor,BLDCM)转矩脉动问题,基于两相导通星形三相六状态工作方式的永磁直流无刷电机数学模型,提出了5种不同的常用PWM调制方式。详细分析了这5种PWM调制方式对电机换相转矩脉动的不同影响并相互比较。根据公式推导得出采用PWM-ON调制方式可使直流无刷电机具有较小的转矩脉动。以TMS320F1812 DSP为控制核心,以180 W小型永磁直流无刷电机为控制对象进行了实验研究。利用DSP分别产生5种PWM调制方式波形并配合模糊PI控制器对电机进行控制。测得了相应的5种PWM调制方式下的相电流波形图。实验结果表明采用PWM-ON调制方式较理想,能够有效地抑制电机的换相转矩脉动。实验结果证明了理论分析的正确性。展开更多
基金National Natural Science Foundation of China (No 59975068) Natural Science Foundation of Tianjin (No993602911)
文摘A mathematical model is established on the basis of the physical characteristic of the negative resistance arc when a low current of 0—50 A is applied in pulsed TIG welding. The simulation model converted from the mathematical model is run in MATLAB environment, and the discussion is focused on the way the peak current ranging from 29 A to 50 A and the time constant of arc in the span of 0.003—0.006 s influence the simulating results and the dynamic characteristic. The simulating data are close to that of welding experiments and correspond to the theoretical conclusion.
文摘The paper mainly focuses on the digital pulse width modulation (DPWM) control techniques for high performance power electronic circuit design. The problem to be solved in this study addresses the DPWM converter design for DC to DC conversion process. The control techniques have been utilized the Fuzzy Logic Rules Base method for proposed SIMULINK model of high performance power electronic circuit. The analytical calculations for real circuit design have been completed based on the mathematical modeling of the system. The results from the developed SIMULINK model confirm the target specifications of the high performance condition for power electronic circuit which was met the objective of this study. The numerical results have been carried out with the help of MATLAB/SIMULINK.
文摘Pulsed current Micro Plasma Arc Welding is used to joint thin sheets of AISI 304L sheets, which are used in manufacturing of metallic bellows and diaphragms. In this article the effects of pulsing current parameters on weld pool geometry namely front width, back width, front height and back height of pulsed current micro plasma arc welded AISI 304L stainless steel sheets was analyzed. Four factors, five levels, central composite design was used to develop mathematical models, incorporating pulsed current parameters and weld pool geometry. The mathematical models have been developed by Response Surface Method. The adequacy of the models was checked by ANOVA technique. Variation of output responses with input process variables are discussed. By using the developed mathematical models, weld pool geometry parameters can be predicted.
基金Ministry of Science, Technology and Innovation, Malaysia (06-02-12-SF0247)Natural Science Foundation of Shaanxi Province, China (2021JM-468)Administration of Traditional Chinese Medicine of Shaanxi Province, China (SZY-KJCYC-2023-018)。
文摘针对永磁直流无刷电机(brushless DC motor,BLDCM)转矩脉动问题,基于两相导通星形三相六状态工作方式的永磁直流无刷电机数学模型,提出了5种不同的常用PWM调制方式。详细分析了这5种PWM调制方式对电机换相转矩脉动的不同影响并相互比较。根据公式推导得出采用PWM-ON调制方式可使直流无刷电机具有较小的转矩脉动。以TMS320F1812 DSP为控制核心,以180 W小型永磁直流无刷电机为控制对象进行了实验研究。利用DSP分别产生5种PWM调制方式波形并配合模糊PI控制器对电机进行控制。测得了相应的5种PWM调制方式下的相电流波形图。实验结果表明采用PWM-ON调制方式较理想,能够有效地抑制电机的换相转矩脉动。实验结果证明了理论分析的正确性。
