Pulsed Nd:YAG laser cladding of high silicon content coating on low silicon steel

A pulsed Nd：YAG （yttrium aluminum garnet） laser-based technique was employed to clad low silicon steel with preplaced Si and Fe mixed powders for high Si content. The surface morphology, microstructural evolution, phase composition, and Si distribution, within the obtained cladding coatings, were characterized by optical microscopy （OM）, field emission scanning electron microscopy （FE-SEM）, with associated energy dispersive spectroscopy （EDS）, transmission electron microscopy （TEM）, and X-ray diffraction （XRD）. The microhardness was also measured along the depth direction of the specimens, A crack- and pore-free cladding coating through excellent metallurgical bonding with the substrate was successfully prepared on low silicon steel by means of optimized single-track and multi-track laser cladding. The phases of the coating are a-Fe, T-Fe, and FeSi. The high microhardness of the lasercladding zone is considered as an increase in Si content and as the refined microstructure produced by the laser treatment. The Si contents of the cladding coatings were about 5.8wt% in the single-track cladding and 6.5wt% in the multi-track cladding, respectively.

Experimental study of electro-optical-switched pulsed Nd:YAG laser

We report the specification of a compact and stable side diode-pumped Q-switched pulsed Nd：YAG laser. We ex- perimentally study and compare the performance of the pulsed Nd：YAG laser in the free-running and Q-switched modes at different pulse repetition rates from 1 Hz to 100 Hz. The laser output energy is stabilized by using a special configu- ration of the optical resonator. In this laser, an unsymmetrical concave-concave resonator is used and this structure helps the mode volume to be nearly fixed when the pulse repetition rate is increased. According to the experimental results in the Q-switched operation, the laser output energy is nearly constant around 70 mJ with an FWHM pulse width of 7 ns at 100 Hz. The optical-to-optical conversion efficiency in the Q-switched regime is 17.5%.

Controlled Laser Transformation Hardening of Martensitic Stainless Steel by Pulsed Nd:YAG Laser

Laser transformation hardening （LTH） was applied to the surface of the AISI 420 martensitic stainless steel by a pulsed Nd：YAG laser to obtain optimum hardness. The influences of process parameters （laser pulse energy, duration time, and travel speed） on the depth and hardness of laser treated area were investigated. Image analysis of SEM microstructure of AISI 420 showed that plate-like carbide have almost fully and （30-40）% of globular carbide particles dissolved into the matrix after laser transformation hardening by pulsed laser and the microstructure was refined to obtain controlled tempered martensite microstructure with 450 VHN hardness.

A 526 mJ Subnanosecond Pulsed Hybrid-Pumped Nd：YAG Laser

A hybrid-pumped Nd：YAG pulse laser with a double-pass two-rod configuration is presented. The focal length of offset lens is particularly studied to compensate for the thermal lens effect and depolarization. For input pulse energy of 141 μJ with pulse duration of 754ps, the pulse laser system delivers 526mJ pulse energy and 728ps pulse width output at lO Hz with pulse profile shape preservation. The energy stability of the laser pulse is less than 3%, and the beam quality factor M2 is less than 2.26.

Structural and Optical Properties of Ce^(3+), Yb^(3+) Co-doped YAG Films by Pulsed Laser Deposition

Ce3＋, Yb3＋ co-doped Y3Al5O12 films were prepared by pulse laser deposition. X-ray diffraction, X-ray photoelectron spectroscopy, photoluminescence spectra were used to characterize their structural and luminescent properties. Near-infrared quantum cutting from the films was observed via a cooperative energy transfer from Ce3＋ to Yb3＋ ions. The high quantum efficiency of the films implies that Ce3＋,Yb3＋ co-doped Y3A15O12 films have potential application by tuning the solar spectrum to enhance the efficiency of silicon solar cells.

Nd:YAG water mist laser treatment for giant gestational gingival tumor: A case report

BACKGROUND This case of gestational gingival tumor is huge and extremely rare in clinical practice.As the growth location of this gingival tumor is in the upper anterior tooth area,it seriously affects the pregnant woman's speech and food,causing great pain to the patient.The use of Nd:YGA water mist laser to remove the gingival tumor resulted in minimal intraoperative bleeding,minimal adverse reactions,and good postoperative healing,which is worthy of clinical promotion and application.CASE SUMMARY The patient,a pregnant woman,reported a large lump in her mouth on the first day of postpartum treatment.Based on medical history and clinical examination,the diagnosis was diagnosed as gestational gingival tumor.Postoperative pathological biopsy also confirmed this diagnosis.The use of Nd:YAG water mist laser to remove the tumor resulted in minimal intraoperative bleeding,clear surgical field of view,short surgical time,and good postoperative healing.CONCLUSION In comparison to traditional surgery,Nd:YAG water mist laser surgery is minimally invasive,minimizes cell damage,reduces bleeding,ensures a clear field of vision,and virtually eliminates postoperative edema,carbonization,and the risk of cross infection.It has unique advantages in oral soft tissue surgery for pregnant patients.Therefore,the clinical application of Nd:YAG water mist laser for the treatment of gestational gingival tumors is an ideal choice.

Clinical usefulness of transpapillary removal of common bile duct stones by frequency doubled double pulse Nd:YAG laser

AIM: To study the efficacy and the safety of laser lithotripsy without direct visual control by using a balloon catheter in patients with bile duct stones that could not be extracted by standard technique. METHODS: The seventeen patients (7 male and 10 female; mean age 67.8 years) with difficult common bile duct (CBD) stones were not amenable for conventional endoscopic maneuvers such as sphincterotomy and mechanical lithotripsy were included in this study. Laser wavelengths of 532 nm and 1064 nm as a double pulse were applied with pulse energy of 120 mJ. The laser fiber was advanced under fluoroscopic control through the ERCP balloon catheter. Laser lithotripsy was continued until the fragment size seemed to be less than 10 mm. Endoscopic extraction of the stones and fragments was performed with the use of the Dormia basket and balloon catheter. RESULTS: Bile duct clearance was achieved in 15 of 17 patients (88%). The mean number of treatment sessions was 1.7 ± 0.6. Endoscopic stone removal could not be achieved in 2 patients (7%). Adverse effects were noted in three patients (hemobilia, pancreatitis, and cholangitis). CONCLUSION: The Frequency Doubled Double Pulse Nd:YAG (FREDDY) laser may be an effective and safe technique in treatment of difficult bile duct stones.

Influence of Ambient Gas and Oxygen Pressure on Nd∶LuVO_4 Films Grown by Pulsed Laser Deposition

The （ 200 ） dominated Nd： LuVO4 films were fabricated successfully on polished SlOE under different ambient gases and different oxygen pressures. By XRD, it is shown that a film with good crystallization is deposited under oxygen and the optimal pressure is 20 Pa. The surface morphology of Nd：LuVO4 films was observed by AFM, and it is found that oxygen pressure influences the surface morphology of Nd ：LuVO4 films. The ratio of content of Nd：LuVO4 films was estimated according to the yields of Lu and V by using RBS spectra, this ratio is in good agreement with the target composition. The effective index refractive of every mode is 2.0044, 1.7098, measured by prism coupler method.

Pump pulse characteristics of quasi-continuous-wave diode-side-pumped Nd:YAG laser

The influence of pumping laser pulse on the property of quasi-continuous-wave(QCW)diode-side-pumped Nd:YAG laser is investigated theoretically and experimentally.Under remaining a fixed duty cycle,the average output power increases,and the corresponding thermal focal length shorten with the increase of the pump pulse duration,which attributes to the decrease of the ratio of pulse buildup time to the pulse duration.At a pump power of 146 W,the laser output power changes from 65.1 W to 81.2 W when the pulse duration is adjusted from 150μs to 1000μs,confirming a significant enhancement of 24.7%.A laser rate equation model incorporating the amplified spontaneous emission is also utilized and numerically solved,and the simulated results agree well with the experimental data.

COLLIDING PULSE MODE-LOCKED Nd:YAG AND Nd:PHOSPHATE GLASS LASERS

Using pentamethylidyne dye as a saturable absorber,we have obtained pulses close to Fourier-transform limit from colliding pulse mode-locked Nd:YAG and Nd:phosphate glass lasers with minim pulse durations of 8 psec and 3.7 psec,respectively.

Photoconductivity Decay Under Illumination of a Pulsed Laser with Unfocused or Focused Beam

Photoconductivity decay(PCD)in semiconductors is investigated by a pulsed laser with an unfocused or a focused beam.The rigorous solutions of PCD under illumination with two different types of laser beams,unfocused and focused,are derived separately.The experimental results of PCD are compared with the theory using Ge-based GaN under illumination of a pulsed Nd:YAG laser at 355nm.The experimental and numerical results are in good agreement.

Timing Jitter and Pulse Width Reduction in a Hybrid Q-Switched Cr,Nd：YAG Laser

We present a detailed study of a combined actively and passively Q-switched （CAPQ） laser with an acousto-optic modulator （AOM） and a codoped Cr^4＋, Nd^3＋ ：YAG crystal The hybrid Q-switch approach is used to produce a short laser pulse with stable and tunable repetition rates. The timing jitter, average pulse width, and average pulse amplitude vary periodically with the AOM modulation frequency under a fixed pump power. The repetition rate of the CAPQ laser can be turned approximately from 4 kHz to 16 kHz with the jitter less than 400 ns.

Multipulse Nd:YAG Laser Thomson Scattering Diagnostics on HT-7 Tokamak

A multipulse Nd：YAG （Neodym-yttrium aluminium garnet） laser Thomson scattering diagnostic system developed was recently applied on HT-7 tokamak to obtain more accurate electron temperatures. A CAMAC-based real-time computer system for laser control, data acquisition, analysis and calibration was investigated in detail. Furthermore, the reliability and accuracy of this diagnostic system were demonstrated by comparing the results with those of a soft-X ray diagnostic system.

Opto-Electronic Investigation of Wet Coating Deposition of ITO Nanopowders on Flexible Substrate Using Pulse Nd-YAG Laser

Transparent thin layer indium tin oxide was coated on polyethylene tetraphetalate (PET) substrate by means of spin coating process and its opto-electronic properties have been investigated. The surface treated by pulse Nd-YAG laser. Pulse frequency, duration and energy were, 1000 Hz, 0.2 to 20 ms and 25 to 40 J respectively. The effect of treatment on crystallization, optical properties and bonding processes of the thin layer was investigated. The results show that ITO coated on flexible PET substrates is conductive and transparent. The sheet transparency for a 350 nm thickness in the visible range is more than 83.6%. Using Nd-YAG laser increased conductivity by a factor of 100 times and causes higher bonding performances.

芪参补气活血养颜汤联合Q开关Nd∶YAG激光治疗女性黄褐斑的美学效果观察

目的:探讨芪参补气活血养颜汤联合Q开关Nd∶YAG激光治疗女性黄褐斑的美学效果。方法:选取笔者医院2019年1月-2022年1月收治的80例黄褐斑女性作为研究对象,按照随机数字表法分为观察组42例(采用芪参补气活血养颜汤联合Q开关Nd∶YAG 1064 nm激光治疗)和对照组38例(采用Q开关Nd∶YAG 1064 nm激光治疗)。观察两组的临床疗效,中医症状积分,皮肤状况,黄褐斑面积及颜色,不良反应发生率。结果:治疗后,观察组患者的总有效率为97.62%,高于对照组患者的84.21%(P<0.05)。治疗后,观察组患者情绪低落、胸胁胀痛、经行乳胀、口苦咽干等上述中医症状积分均低于对照组患者(P<0.05)。治疗后,观察组黑素指数、红斑指数及皱纹指数均低于对照组(P<0.05)。治疗后,观察组黄褐斑面积及颜色评分均低于对照组(P<0.05)。治疗后,观察组患者的总不良反应发生率与对照组患者比较差异无统计学意义(P>0.05)。结论:芪参补气活血养颜汤联合Q开关Nd∶YAG1064 nm激光能够提高黄褐斑治疗的临床疗效,改善患者临床症状,改善皮肤状况,减少黄褐斑面积及颜色,安全性较高,值得临床推广。

LD环状侧面均匀泵浦Nd∶YAG激光振荡器

激光二极管(Laser Diode,LD)环状侧面均匀泵浦的激光振荡器具有结构简单、光束质量高、单脉冲能量大等特点,常常在高能脉冲固体激光器中作为主振荡功率放大(MOPA)结构的振荡器,一直是国内外科研人员研究的重要方向之一。本论文通过Zemax软件对不同激光二极管排列方式以及不同工作物质吸收系数对吸收光场的影响的进行了仿真。基于仿真结果,设计了一种20个bar条串联的环状侧面泵浦结构,以提高晶体吸收的均匀性。通过该环状侧泵结构,结合超高斯非稳腔设计,搭建了一种双棒串接激光振荡器进行实验研究。该振荡器实现了在100 Hz重复频率下,单脉冲能量为496 mJ、脉冲宽度为12.4 ns的1064 nm激光输出,光束质量优于9 mm·mrad,光-光转换效率为18.5%。并且该振荡器可以维持光轴稳定不变的同时,实现20 ns脉宽以内变档可调。实验结果证明了该环状侧面均匀泵浦结构可靠有效,为MOPA结构振荡器选取提供了一种有效的方案。

双波长LD泵浦Nd^(3+)∶YAG免温控被动调Q激光器的研究

传统的固体激光器体积、重量大,功耗高,限制了其在空间受限设备中的应用。被动调Q的LD泵浦免温控固体激光器省去了复杂的温度控制装置,调Q机构简单,能够满足复杂温度环境的特殊应用场景的小型化、低功耗要求。提出了基于双波长LD泵浦实现宽温度范围免温控阈值自适应的1.06μm激光脉冲输出方法。基于Nd∶YAG晶体设计了角锥棱镜谐振腔,仿真分析了LD泵浦源到激光棒的面心距对热负载的影响,并确定4 mm的最佳面心距。数值分析了相同泵浦功率下-40~60℃温度范围内激光静态能量输出变化,以及不同初始透过率的可饱和吸收体对激光阈值脉宽的影响。计算结果表明在-37℃~60℃范围内,阈值脉宽都在200μs以下,阈值脉宽最低点达到了29.4μs。构建主波实时探测的阈值自适应调节装置并搭建实验系统,实验结果表明,在温度范围为-35~60℃时,阈值脉宽变化范围为40~180μs。采用激光腔体一体加工成型,应用轻量化的铝合金材料,实现工程化应用,体积83.5 mm×44 mm×29.5 mm,重量约为230 g。在23.8%初始透过率的饱和吸收体条件下实现单脉冲输出能量42 mJ,脉冲宽度5.2 ns。

Microstructure,properties and first principles calculation of titanium alloy/steel by Nd: YAG laser self-fluxing welding

The experiment of Nd： YAG pulsed laser self-fluxing welding for 304 stainless steel/Ti6Al4V titanium alloy dissimilar metal was carried out. The microstructure properties of welded joint were analyzed by SEM, EDS and XRD. The equilibrium lattice constants, enthalpies of formation, cohesive energies, mechanical properties, Debye temperatures and valence electron structures of Ti-Fe intermetallic compounds （IMCs） were calculated by the first principle pseudopotential plane wave method based on density functional theory （DFT）. According to the thermodynamic data of Ti-Fe-Cr compounds, the Gibbs free energy per mole of compound at different temperatures was calculated and their thermal stability was compared. The results show that there are no macroscopic cracks in the welded joints, and the IMCs distributed evenly along the welding interface exhibits 3 distinct layers of microstructure with different colors. The welds interface generates IMCs of TiFe, TiFe 2 and a small amount of Ti 5Cr 7Fe 17 IMCs. Ti-Fe IMCs with high thermodynamic stability and easy alloying formation. The results of Gibbs free energies show that the sequence of precipitates in the interface is Ti 5Cr 7Fe 17 , TiFe 2 and TiFe in high temperature during the metallurgical reaction. The G/B values of Ti-Fe IMCs are greater than the critical value of 0.5, indicating that it is an intrinsic brittleness.

低通量Q开关Nd∶YAG激光联合微针导入氨甲环酸治疗黄褐斑

目的评估低通量Q开关Nd∶YAG(QSNY)激光单一治疗与其联合微针导入氨甲环酸治疗黄褐斑的疗效差别,并基于皮肤镜分型分析不同类型黄褐斑的最佳治疗方式。方法收集2022年1月—2023年12月就诊的黄褐斑患者的临床资料,比较QSNY激光单一治疗组(对照组,23例)与QSNY激光联合微针导入氨甲环酸治疗组(联合组,23例)治疗3次后改良黄褐斑面积和严重程度指数(mMASI)评分、皮肤镜检查总评分(TDS)、医生临床评估(PGA)和不良反应的发生率。结果2组患者治疗后mMASI评分均降低,联合组的mMASI评分改善优于对照组(P<0.05);2组患者治疗后TDS均降低,联合组改善程度更佳,差别有统计学意义(P<0.05)。与治疗前比较,联合组治疗后毛细血管扩张明显改善,差别有统计学意义(P<0.001)。2组患者的PGA评分比较,差别无统计学意义(P>0.05)。2组患者治疗后均未发现明显的不良反应。结论QSNY激光联合微针导入氨甲环酸治疗黄褐斑的疗效优于单一激光治疗,前者对血管增生和表皮色素沉着明显的黄褐斑更有利。

A high-power high-stability Q-switched green laser with intracavity frequency doubling using a diode-pumped composite ceramic Nd:YAG laser

We successfully obtain a high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd：YAG in a straight piano-concave cavity. The temperature distribution in composite ceramic Nd：YAG crystal is numerically analyzed and compared with that of conventional Nd：YAG crystal. By using a composite ceramic Nd：YAG rod and a type-II high gray track resistance KTP （HGTR-KTP） crystal, a green laser with an average output power of 165 W is obtained at a repetition rate of 25 kHz, with a diode-to-green optical conversion of 14.68%, and a pulse width of 162 ns. To the best of our knowledge, both the output power and optical-to-optical efficiency are the highest values for green laser systems with intracavity frequency doubling of this novel composite ceramic Nd：YAG laser to date. The power fluctuation at around 160 W is lower than 0.3% in 2.5 hours.