Decontamination of 2-Chloroethyl Ethyl Sulfide by Pulsed Corona Plasma

Decontamination of 2-chloroethyl ethyl sulfide （2-CEES, CH_3CH_2SCH_2CH_2C1） by pulsed corona plasma was investigated. The results show that 212.6 mg/m^3 of 2-CEES, with the gas flow rate of 2 m^3/h, can be decontaminated to 0.09 mg/m^3. According to the variation of the inlet and outlet concentration of 2-CEES vapor with retention time, it is found that the reaction of 2-CEES in a pulsed corona plasma system follows the first order reaction, with the reaction rate constant of 0.463 s^-1. The decontamination mechanism is discussed based on an analysis of the dissociation energy of chemical bonds and decontamination products. The C-S bond adjacent to the C1 atom will be destroyed firstly to form CH3CH2S. and .CH2CH2C1 radicals. CH3CH2S. can be decomposed to .C_2H_5 and .S..S can be oxidized to SO_2, while .C_2H_5 can be finally oxidized to CO_2 and H_2O. The C-Cl bond in the .CH_2CH_2C1 radical can be destroyed to form .CH_2CH_2. and .C1, which can be mineralized to CO_2, H_2O and HCl. The H atom in the .CH_2CH_2C1 radical can also be substituted by -C1 to form CHCl_2-CHCl_2.

Electrical Characteristics of Pulsed Corona Discharge Plasmas in Chitosan Solution

Pulsed discharge plasma has exhibited active potential to prepare low molecular weight chitosan. In the present study, the viscosity of ehitosan solution was decreased noticeably after treated with pulsed corona discharge plasma. An experimental investigation on electrical characteristics of pulsed corona discharge plasma in chitosan solution was conducted with a view toward getting insight into discharge process. Factors affecting I-V curve, single pulse injec- tion energy and pulse width were studied. Experimental results showed positive effect of pulsed peak voltage on discharge plasma in chitosan solution. Pulse-forming capacitor greatly influenced the discharge form, and 4 nF was observed as a suitable value for efficiently generating stable discharge plasmas. As the electrode distance was larger than 10 ram, it had slight impact on dis- charge plasma due to the excellent conductive-property of chitosan solution. The injection energy significantly increased with air flow rate, while the pulse width hardly changed as the air flow rate increased from 0.5 m^3/h to 1.0 m^3/h. This study is expected to provide reference for promoting the application of pulsed corona discharge plasma to ehitosan solution treatment.

Study on the Methane Coupling under Pulse Corona Plasma by Using CO_2 as Oxidant

In this paper, the conversion of CO2/CH4 by using pulse corona plasma was studied at atmospheric pressure and ambient temperature. The effects of ratio of CO2/CH4, pulse voltage and repeated frequency of plasma discharge were first studied in the system.

Comparative Analysis of Experiment Treating Benzene and CEES by Pulse Corona Plasma

Based on an experiment treating benzene and 2-chloroethyl ethyl sulfide （CEES） by pulse corona induced-plasma, the simiarities and differences found in the experimental data and analytical results are analyzed in a comparative manner in this paper. The theory applied is also discussed.

Methane Coupling Using Hydrogen Plasma and Pt/γ-Al_2O_3 Catalyst

In this paper, methane coupling at ambient temperature, under atmospheric pressure and in the presence of hydrogen was firstly investigated by using pulse corona plasma and Pt/g-Al2O3 catalyst. Experimental results showed that Pt/g-Al2O3 catalyst has catalytic activity for methane coupling to C2H4. Over sixty percent of outcomes of C2 hydrocarbons were detected to be ethylene.

Experimental study of NO_2 reduction in N_2/Ar and O_2/Ar mixtures by pulsed corona discharge

Non-thermal plasma technology has been regarded as a promising alternative technology for NOx removal. The understanding of NO2 reduction characteristics is extremely important since NO2 reduction could lower the total NO oxidation rate in the plasma atmosphere. In this study, NO2 reduction was experimentally investigated using a non-thermal plasma reactor driven by a pulsed power supply for different simulated gas compositions and operating parameters. The NO2 reduction was promoted by increasing the specific energy density （SED）, and the highest conversion rates were 33.7%, 42.1% and 25.7% for Ar, N2/Ar and O2/Ar, respectively. For a given SED, the NO2 conversion rate had the order N2/Ar 〉 Ar 〉 02/Ar. The highest energy yield of 3.31 g/kWh was obtained in N2/Ar plasma and decreased with increasing SED; the same trends were also found in the other two gas compositions. The conversion rate decreased with increasing initial NO2 concentration. Furthermore, the presence of N2 or O2 led to different reaction pathways for NO2 conversion due to the formation of different dominating reactive radicals.