The coupling efficiency of the pump coupler determines the pump light injection capacity of a laser system. Experi- mental analysis of the influences of different factors on the pump coupling efficiency is in accordan...The coupling efficiency of the pump coupler determines the pump light injection capacity of a laser system. Experi- mental analysis of the influences of different factors on the pump coupling efficiency is in accordance with this conclusion. We use two Nufern fibers （400 Ixrn/440 p.m with NA = 0.22） as pump arm, one Nufern fiber （20 μm/400 μm with NA = 0.06/0.46） as a main fiber to make a side-pumping （2 ＋ 1） × 1 coupler. The experimental result shows that the total output power of this （2 ＋ 1） × 1 coupler is about 1160 W, corresponding to a coupling efficiency as high as 98.6%. The loss of signal light is less than 1%.展开更多
We report an efficient continuous-wave self-Raman laser at 1176 nm based on a 20-mm-long composite YVO4/Nd：YVO4/YVO4 crystal and pumped by a wavelength-locked 878.9 nm diode laser.A maximum output power of 5.3 W is a...We report an efficient continuous-wave self-Raman laser at 1176 nm based on a 20-mm-long composite YVO4/Nd：YVO4/YVO4 crystal and pumped by a wavelength-locked 878.9 nm diode laser.A maximum output power of 5.3 W is achieved at a pump power of 26 W,corresponding to an optical conversion efficiency of 20%and a slope efficiency of 21%.The Raman threshold for the diode pump power was only 0.92 W.The results reveal that in-band pumping by a wavelength-locked diode laser significantly enhances output power and efficiency of self-Raman lasers by virtue of improved pump absorption and relieved thermal loading.展开更多
This paper reports that an output window for optically pumped terahertz （THz） laser has been fabricated by depositing a capacitive nickel-mesh on a thick high-resistivity silicon substrate （approximating to 5 mm th...This paper reports that an output window for optically pumped terahertz （THz） laser has been fabricated by depositing a capacitive nickel-mesh on a thick high-resistivity silicon substrate （approximating to 5 mm thick）. Unlike the conventional process of depositing a gold film approximating to 100 nm on negative photoresist using electron-beam evaporation, a nickel film approximating to 1.5 μm thick is directly deposited on the clean surface of dielectric substrate using magnetron sputtering and then a positive photoresist is spun onto the nickel metal surface at 6000 r for 60 s. A transmittance spectrum of the output window in a certain frequency range （say, from zero to 1 THz） has been obtained by using THz time domain spectroscopy. Moreover a transmittance spectrum simulated numerically has also been estimated with respect to the output window using the transmission-line model （TLM） containing attenuation component from dielectric substrate. The simulation results show that the TLM can explain well the experimental curve in a certain frequency range from zero to 1 THz. Thus it is demonstrated that the improved optical component can be efficiently used as both output coupler and output window for optically pumped THz lasers.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.61307057)the Fund from the State Key Laboratory of Tribology,Tsinghua University(Grant No.SKLT12B08)
文摘The coupling efficiency of the pump coupler determines the pump light injection capacity of a laser system. Experi- mental analysis of the influences of different factors on the pump coupling efficiency is in accordance with this conclusion. We use two Nufern fibers （400 Ixrn/440 p.m with NA = 0.22） as pump arm, one Nufern fiber （20 μm/400 μm with NA = 0.06/0.46） as a main fiber to make a side-pumping （2 ＋ 1） × 1 coupler. The experimental result shows that the total output power of this （2 ＋ 1） × 1 coupler is about 1160 W, corresponding to a coupling efficiency as high as 98.6%. The loss of signal light is less than 1%.
基金Project supported by the Natural Science Foundation of Jiangsu Province,China(Grant Nos.BK20130453 and BK20130434)the National Natural Science Foundation of China(Grant No.11304271)
文摘We report an efficient continuous-wave self-Raman laser at 1176 nm based on a 20-mm-long composite YVO4/Nd：YVO4/YVO4 crystal and pumped by a wavelength-locked 878.9 nm diode laser.A maximum output power of 5.3 W is achieved at a pump power of 26 W,corresponding to an optical conversion efficiency of 20%and a slope efficiency of 21%.The Raman threshold for the diode pump power was only 0.92 W.The results reveal that in-band pumping by a wavelength-locked diode laser significantly enhances output power and efficiency of self-Raman lasers by virtue of improved pump absorption and relieved thermal loading.
基金Project supported by the Creative Foundation of Wuhan National Laboratory for Optoelectronics (Grant No. Z080007)partly by the National Basic Research Program of China (973 Program)(Grant No. 61328)
文摘This paper reports that an output window for optically pumped terahertz （THz） laser has been fabricated by depositing a capacitive nickel-mesh on a thick high-resistivity silicon substrate （approximating to 5 mm thick）. Unlike the conventional process of depositing a gold film approximating to 100 nm on negative photoresist using electron-beam evaporation, a nickel film approximating to 1.5 μm thick is directly deposited on the clean surface of dielectric substrate using magnetron sputtering and then a positive photoresist is spun onto the nickel metal surface at 6000 r for 60 s. A transmittance spectrum of the output window in a certain frequency range （say, from zero to 1 THz） has been obtained by using THz time domain spectroscopy. Moreover a transmittance spectrum simulated numerically has also been estimated with respect to the output window using the transmission-line model （TLM） containing attenuation component from dielectric substrate. The simulation results show that the TLM can explain well the experimental curve in a certain frequency range from zero to 1 THz. Thus it is demonstrated that the improved optical component can be efficiently used as both output coupler and output window for optically pumped THz lasers.
