The disc-seal single screw pump(DSSP)used in the field of high viscosity oily sludge transport has a huge advantage.However,there is no research on the pressurization characteristics of the DSSP at present,which makes...The disc-seal single screw pump(DSSP)used in the field of high viscosity oily sludge transport has a huge advantage.However,there is no research on the pressurization characteristics of the DSSP at present,which makes its application limited.In view of this,the pressurization process mathematical model of the DSSP was established based on the geometric model of the pump.By using this model,the pressurization characteristics of DSSP and the influence of working parameters on the pressurization process were studied combined with the principle of back-flow pressurization.Analysis results show that the instantaneous pressurization process could be realized mainly depending on the reflux pressurization from the outlet chamber to the pressurization chamber when the screw rotor rotating angle is located at-5°to+5°.The pressure in the pressurization chamber will increase with the increase of working parameters which include inlet pressure,outlet pressure,screw rotation velocity and dynamic viscosity of fluid medium in the area of flow-back pressurization.The screw rotation velocity and the viscosity of the conveying medium have significant effects on the peak pressure in the pressurization chamber,and the peak pressure in the pressurization chamber is proportional to the screw rotation velocity and the dynamic viscosity coefficient of the conveying medium.The proportional coefficient between the peak pressure and the screw rotation velocity is 6.29×10~4.The proportional coefficient between the peak pressure and the dynamic viscosity of the conveying medium is 6.28×10~6.展开更多
The research object used in the dissertation was screw pump, which was widely applied in engineering field. The analysis of end face profile formation was completed on its main working components, i.e., rotor and stat...The research object used in the dissertation was screw pump, which was widely applied in engineering field. The analysis of end face profile formation was completed on its main working components, i.e., rotor and stator. With the purpose of finding optimal parameters to improve the efficiency of screw pump design, the key technologies involved in the parametric modeling of rotor and stator were analyzed. The three-dimensional (3D) design software SolidWorks was used for the secondary development and parametric modeling of rotor and stator. After that the simulation models of different kinds of screw pumps were established based on the cycloid type, variation coefficient, and screw head number. Finally the COSMOSMotion was used to analyze the motion characteristics on the equidistant line of rotor, including velocity and acceleration. This design and modeling method has been used in screw pump enterprises for design and development, laying the foundation for finite element analysis and further optimization of screw pump.展开更多
The Jesuits played an important role in the transmission of Western science and technology to China during the seventeenth and eighteenth centuries,though their impact on water technology has received scant attention ...The Jesuits played an important role in the transmission of Western science and technology to China during the seventeenth and eighteenth centuries,though their impact on water technology has received scant attention thus far.As a case in point,Sabatino de Ursis,Society of Jesus熊三拔,in collaboration with the Chinese official Xu Guangqi徐光啟,published in 1612 Hydraulic Methods of the Far West(Taixi shuifa泰西水法),the earliest book in China on Western water-lifting devices,which contained a detailed description of the Archimedean screw pump.While the impact of the Archimedean screw pump in China and Korea remained rather limited,the screw pump was used to drain water from gold mines in the Japanese Sado Island from as early as 1637.This fact became known in the West only in the very late 1800s when hand-colored picture scrolls about the Japanese gold mining process became available.These scrolls show various applications of Archimedean screw,which apparently were made according to the manufacturing instructions in Hydraulic Methods of the Far West.展开更多
为提高泵前过滤器自清洗性能,解决过滤系统频繁中断问题,该研究将阿基米德螺旋转轮应用于泵前过滤器自清洗过程,通过数值仿真与物理试验,结合相关性分析和线性回归分析,探究叶片螺距、叶片角度、叶片数量对阿基米德螺旋转轮转速的影响...为提高泵前过滤器自清洗性能,解决过滤系统频繁中断问题,该研究将阿基米德螺旋转轮应用于泵前过滤器自清洗过程,通过数值仿真与物理试验,结合相关性分析和线性回归分析,探究叶片螺距、叶片角度、叶片数量对阿基米德螺旋转轮转速的影响规律。结果表明:转轮转速随螺距的增加逐渐下降,且降低幅度逐渐上升,随叶片角度和叶片数量的增加转轮转速的提升较小且提升幅度不断减小,对转轮转速影响程度由大到小为螺距、叶片角度和叶片数量。通过TOPSIS法(technique for order preference by similarity to an ideal solution)综合评价得到最佳结构参数组合为:螺距133 mm,叶片角度90°,叶片数量1。优化后水驱式自清洗泵前过滤器开展自清洗试验,结果显示流量经过最初下降阶段后稳定在294.9~296.6 m^(3)/h区间,流量降幅仅为1.13%~1.70%,利用水力驱动阿基米德螺旋转轮带动自清洗装置的滤网清洗效果良好。研究结果可为水驱式自清洗泵前过滤器的结构设计和优化提供参考。展开更多
基金supported by National Key R&D Program of China[NO.2020YFB2010002]National Natural Science Foundation of China[NO.51706247,NO.51975585]the Fundamental Research Funds for the Central Universities and the Opening Fund of National Engineering Laboratory of Offshore Geophysical and Exploration Equipment[NO.20CX02312A]
文摘The disc-seal single screw pump(DSSP)used in the field of high viscosity oily sludge transport has a huge advantage.However,there is no research on the pressurization characteristics of the DSSP at present,which makes its application limited.In view of this,the pressurization process mathematical model of the DSSP was established based on the geometric model of the pump.By using this model,the pressurization characteristics of DSSP and the influence of working parameters on the pressurization process were studied combined with the principle of back-flow pressurization.Analysis results show that the instantaneous pressurization process could be realized mainly depending on the reflux pressurization from the outlet chamber to the pressurization chamber when the screw rotor rotating angle is located at-5°to+5°.The pressure in the pressurization chamber will increase with the increase of working parameters which include inlet pressure,outlet pressure,screw rotation velocity and dynamic viscosity of fluid medium in the area of flow-back pressurization.The screw rotation velocity and the viscosity of the conveying medium have significant effects on the peak pressure in the pressurization chamber,and the peak pressure in the pressurization chamber is proportional to the screw rotation velocity and the dynamic viscosity coefficient of the conveying medium.The proportional coefficient between the peak pressure and the screw rotation velocity is 6.29×10~4.The proportional coefficient between the peak pressure and the dynamic viscosity of the conveying medium is 6.28×10~6.
基金National Nature Science Foundation of China(No.61175125) 2010 Major Project of Yuhang City Technology Division of China
文摘The research object used in the dissertation was screw pump, which was widely applied in engineering field. The analysis of end face profile formation was completed on its main working components, i.e., rotor and stator. With the purpose of finding optimal parameters to improve the efficiency of screw pump design, the key technologies involved in the parametric modeling of rotor and stator were analyzed. The three-dimensional (3D) design software SolidWorks was used for the secondary development and parametric modeling of rotor and stator. After that the simulation models of different kinds of screw pumps were established based on the cycloid type, variation coefficient, and screw head number. Finally the COSMOSMotion was used to analyze the motion characteristics on the equidistant line of rotor, including velocity and acceleration. This design and modeling method has been used in screw pump enterprises for design and development, laying the foundation for finite element analysis and further optimization of screw pump.
文摘The Jesuits played an important role in the transmission of Western science and technology to China during the seventeenth and eighteenth centuries,though their impact on water technology has received scant attention thus far.As a case in point,Sabatino de Ursis,Society of Jesus熊三拔,in collaboration with the Chinese official Xu Guangqi徐光啟,published in 1612 Hydraulic Methods of the Far West(Taixi shuifa泰西水法),the earliest book in China on Western water-lifting devices,which contained a detailed description of the Archimedean screw pump.While the impact of the Archimedean screw pump in China and Korea remained rather limited,the screw pump was used to drain water from gold mines in the Japanese Sado Island from as early as 1637.This fact became known in the West only in the very late 1800s when hand-colored picture scrolls about the Japanese gold mining process became available.These scrolls show various applications of Archimedean screw,which apparently were made according to the manufacturing instructions in Hydraulic Methods of the Far West.
文摘为提高泵前过滤器自清洗性能,解决过滤系统频繁中断问题,该研究将阿基米德螺旋转轮应用于泵前过滤器自清洗过程,通过数值仿真与物理试验,结合相关性分析和线性回归分析,探究叶片螺距、叶片角度、叶片数量对阿基米德螺旋转轮转速的影响规律。结果表明:转轮转速随螺距的增加逐渐下降,且降低幅度逐渐上升,随叶片角度和叶片数量的增加转轮转速的提升较小且提升幅度不断减小,对转轮转速影响程度由大到小为螺距、叶片角度和叶片数量。通过TOPSIS法(technique for order preference by similarity to an ideal solution)综合评价得到最佳结构参数组合为:螺距133 mm,叶片角度90°,叶片数量1。优化后水驱式自清洗泵前过滤器开展自清洗试验,结果显示流量经过最初下降阶段后稳定在294.9~296.6 m^(3)/h区间,流量降幅仅为1.13%~1.70%,利用水力驱动阿基米德螺旋转轮带动自清洗装置的滤网清洗效果良好。研究结果可为水驱式自清洗泵前过滤器的结构设计和优化提供参考。
