Simulation of Underground Reservoir Stability of Pumped Storage Power Station Based on Fluid-Structure Coupling

Based on global initiatives such as the clean energy transition and the development of renewable energy,the pumped storage power station has become a new and significant way of energy storage and regulation,and its construction environment is more complex than that of a traditional reservoir.In particular,the stability of the rock strata in the underground reservoirs is affected by the seepage pressure and rock stress,which presents some challenges in achieving engineering safety and stability.Using the advantages of the numerical simulation method in dealing deal with nonlinear problems in engineering stability,in this study,the stability of the underground reservoir of the Shidangshan(SDS)pumped storage power station was numerically calculated and quantitatively analyzed based on fluid-structure coupling theory,providing an important reference for the safe operation and management of the underground reservoir.First,using the COMSOL software,a suitablemechanicalmodel was created in accordance with the geological structure and project characteristics of the underground reservoir.Next,the characteristics of the stress field,displacement field,and seepage field after excavation of the underground reservoir were simulated in light of the seepage effect of groundwater on the nearby rock of the underground reservoir.Finally,based on the construction specifications and Molar-Coulomb criterion,a thorough evaluation of the stability of the underground reservoir was performed through simulation of the filling and discharge conditions and anti-seepage strengthening measures.The findings demonstrate that the numerical simulation results have a certain level of reliability and are in accordance with the stress measured in the project area.The underground reservoir excavation resulted in a maximum displacement value of the rock mass around the caverns of 3.56 mm in a typical section,and the safety coefficient of the parts,as determined using the Molar-Coulomb criterion,was higher than 1,indicating that the project as a whole is in a stable state.

Study on integrated development and hybrid operation mode of nuclear power plant and pumped-storage power station

The nuclear power plant is suitable for base-load operation, while the pumped-storage unit mainly gives play to capacity benefit in the electric power system;hence, the integrated development and hybrid operation mode of the two can better meet the needs of the electric power system. This article first presents an analysis of the necessity and superiority of such mode, then explains its meaning and analyzes the working routes. Finally, it proposes the business modes as follows: low price pumping water electricity plus nuclear power in the near term;nuclear power shifted to pumped storage power participating in market competition in the middle term;and, in the long term, nuclear power shifted to pumped storage power as primary and serving as an electric power system when needed.

Prospect of new pumped-storage power station

In this paper, a new type of pumped-storage power station with faster response speed, wider regulation range, and better stability is proposed. The operational flexible of the traditional pumped-storage power station can be improved with variable-speed pumped-storage tech no logy. Combined with chemical en ergy storage, the failure to achieve sec on d-order response speed and the insufficient safety and reliability of pumped-storage power units could be solved. With the better solar en ergy and site resources, the in teg rated performance can be improved by an optical storage system in stalled in future pumped-storage stations. Through the characteristics analysis of the new type of pumped-storage power station, three types of optimal station locations are proposed, namely, the load concentration area, new energy concentration area, and ultrahigh- voltage direct current receiver area. Taking the new pumped-storage power station as an example, the advantages of multi-energy cooperation and joint operation are analyzed. It can be predicted that the frequency and load regulation of the power grid will be more flexible, and the service capacity to the main power grid will be much stronger in the future.

Equivalent Substitution Based Method for Calculation of Best Installed Capacity of Pumped Storage Power Station

This paper proposes a novel method to calculate the best installed capacity of pumped storage power station. First, we choose the day with maximum load as the typical day for every month and simulate the system running in two cases of whether the pumped storage power station is put into operation. The difference of the total coal consumption between the two cases is the peak load shifting benefit. Furthermore, we build load model and power generation model to calculate the benefit of emergency use and frequency modulation, which are the major projects of dynamic benefits. At last, on the premise of ensuring the system requirements, the developed method employs the maximum benefit of the unit capacity as the objective function to get the best installed capacity of pumped storage power station by simulations. Tests on a provincial power grid have shown that the developed method which combines of load characteristics, electric structure and other factors can get the best installed capacity of pumped storage power station easily and has a certain guiding significance for the planning and construction of the pumped storage power station.

Optimal Dispatching Model Considering the Pumped Sto-rage Power Plant in Hunan

This paper made a research on the Intelligent Optimization Operating Modeling of Pumped Storage Power Station in Hunan Power Grid. First it introduces the characteristics of Hunan power grid and analysis the practical requirement of dispatching. Then it brings forward the intelligent optimization model and set up running model for pumped storage power station of Hei Mi-feng. At last, it introduces the application of pumped storage power station in Hunan power grid and proves the effectiveness of the optimization models.

基于Microstation及奥维地图的抽水蓄能电站施工总布置设计

抽水蓄能电站施工总布置设计涉及专业广、内容多、布置范围大,且设计周期不断被压缩,对工程设计人员要求逐渐提高,而传统的施工总布置设计方法效率较低,逐渐难以适应快节奏的设计工作。基于Microstation及奥维地图,利用多维设计手段以及GPS定位和导航功能,对抽水蓄能电站施工总布置设计进行研究。设计效果表明:基于Microstation及奥维地图的抽水蓄能电站施工总布置设计,提高了勘察设计效率及质量,减少了勘察设计失误,为抽水蓄能电站施工总布置设计提供了新思路。

计及深度调峰的风-光-水-火-抽蓄多能源联网系统优化调度研究

多种能源联网运行逐步成为未来电力系统发展的方向,多能源联网系统的优化调度是应对规模化新能源并网消纳的重要手段。文中建立了计及火电机组深度调峰成本的风-光-水-火-抽蓄联网系统成本模型和考虑调峰主动性的风-光-水-火-抽蓄联网系统日前优化调度模型。针对多能源耦合系统结构复杂的情况,提出了分层优化调度的模型求解策略。上层模型以净负荷波动最小为优化目标,得到等效负荷曲线;下层模型根据上层模型的调度结果,以调峰运行的经济性最优和新能源弃电率最低为目标函数,计及调峰主动性,求解考虑火电机组深度调峰煤耗特性的含新能源系统的经济调度问题。仿真算例表明所建模型实现了多能源联网系统的互补运行,提升了火电机组的深度调峰能力,降低新能源弃电率和系统运行成本。

抽蓄电站全库盆防渗水库渗流缺陷影响分析

针对抽蓄电站全库盆防渗水库土工膜缺陷导致水库渗流量产生变化的安全问题,结合陕西省某抽蓄电站水库库底土工膜防渗工程,采用单因素影响分析和多因素影响分析方法进行抽蓄电站全库盆防渗水库渗流缺陷影响分析。结果表明,水头大小、缺陷大小、缺陷个数均正向影响抽蓄水库渗流量,而缺陷位置与抽蓄水库渗流量的相关性不明显。其中缺陷大小是影响抽蓄水库渗流量的主要因素,其次为水头大小,再次为缺陷个数。

竖井式进出水口水力特性研究进展

竖井式进出水口是抽水蓄能电站水道系统两端控制水流的常用进出水口型式之一。竖井式进出水口双向过流,水流在短距离内经历两次90°流向转变(水平-竖直-水平),流向变化剧烈,水力条件复杂,深入研究竖井式进出水口水力特性,进而优化其体型结构,对抽水蓄能电站设计及施工具有重要意义。首先,介绍竖井式进出水口应用背景及体型特点,分析竖井式进出水口水力特性存在的问题;其次,对竖井式进出水口孔口流量分配、拦污栅断面流速分布、漩涡和水头损失等方面研究进展进行总结;最后,归纳了竖井式进出水口水力特性研究方法,探讨了今后研究应聚焦的主要方向。

侧式进/出水口各孔道流量分配差异及影响因素

对于抽水蓄能电站侧式进/出水口各孔道流量分配,现有设计规范规定进/出水口相邻中边孔道的流量不均匀程度不宜超过10%,但实际工程设计难以达到此要求.本文以某抽水蓄能电站侧式进/出水口为例,通过优化进/出水口各体型参数,利用数值模拟方法研究各孔道流量等水力参数,重点分析分流墩布置对各孔道流量分配的影响及其规律,试图使进流工况和出流工况相邻中边孔道的流量不均匀程度均最小.研究表明,改变扩散段分流墩布置能有效改善流量不均匀程度.对于3墩4孔侧式进/出水口,相邻中边孔道的流量不均匀程度在出流工况下随中边孔宽度比增大而增大,在进流工况下随中边孔宽度比增大而减小;当中边孔宽度比增大且中墩后移距离减小时,出流工况和进流工况下的流量不均匀程度均减小.对于2墩3孔侧式进/出水口,相邻中边孔道的流量不均匀程度不论在出流工况下还是在进流工况下,均随中边孔宽度比增大呈先减小后增大的规律.优化后的3墩4孔侧式进/出水口的中边孔宽度比取0.228∶0.272,中墩后移距离取0.36D(D为隧洞直径),其相邻中边孔道的流量不均匀程度均较优,在出流工况下为18.47%~19.43%,在进流工况下为19.82%~19.83%;优化后的2墩3孔侧式进/出水口的中边孔宽度比取0.310∶0.345,其相邻中边孔道的流量不均匀程度均较优,在出流工况下为19.47%~19.63%,在进流工况下为18.66%~18.67%.相邻中边孔道的流量不均匀程度较难满足不宜超过10%的设计规范要求.研究成果将有助于《抽水蓄能电站设计规范》中关于进/出水口水力指标要求的完善.

NB/T 35009-2024修订内容解读及抽水蓄能电站标准化工作历程回顾

本文回顾了抽水蓄能电站选点规划标准化工作历程,从90年代选点规划工作范围逐步扩展,一批代表性站点规划落地,选点规划思想逐渐成熟,首版标准于2003年编制完成。到2009年全国范围抽水蓄能电站选点规划系统性开展,继22个省(区、市)完成选点工作,第二版标准修订完成,有效指导了实践工作。随着抽水蓄能电站选点规划的管理流程和技术路线不断成熟,选点规划已成为前期工作和开工建设的重要基础。双碳目标提出以来,抽水蓄能中长期发展规划为行业发展带来新机遇新挑战,第三版标准修订工作适时开展,区分功能定位、明确技术要求,积极响应了当前新能源和抽水蓄能行业高质量发展的要求。

基于组合赋权-云模型的抽蓄电站高质量发展评价体系

为科学评价生产期抽蓄电站高质量发展现状、把握电站发展的薄弱环节、明确建设期及新投运电站发展方向,根据抽蓄电站定位及高质量发展内涵,经过2轮筛选,构建了包含服务电力系统稳定运行、经济、绿色、创新、共享5个一级指标以及18个二级指标的评价指标体系;选用层次分析法–决策实验分析方法确定指标权重,运用云模型评价各电站高质量发展等级。最后,选取A抽蓄电站为算例验证评价体系适用性。评价结果显示,该电站服务电力系统稳定运行、绿色和共享3个指标表现均为良好,经济和创新指标表现为中等,与电站实际运行情况相符合。该验证结果表明,采用上述方法构建的评价指标体系有很好的适用性。

抽水蓄能电站防沙措施研究

以典型抽水蓄能电站为研究对象,开展了水库防沙措施研究。针对复杂工程条件,在分析各种防沙布置措施的基础上,考虑以沉代拦、导沉结合,提出导沙堤和尾水明渠相结合的防沙布置型式。经过数值模拟和物理模型验证,该型式减少过机泥沙效果明显,水力学参数合理。研究成果可为类似工程规划、设计和运行提供参考。

宽式防旋墩环形堰竖井水力特性分析

目前许多拟建抽蓄工程泄洪洞的环形堰竖井入口设置了新型宽式防旋墩,以消除喉口处由不可控漩流引起的呛水等不利流态,而宽式防旋墩环形堰竖井的水气特性与以往采用起旋墩和窄式防旋墩的竖井存在较大差异,业内对其认识尚不清晰。以石台抽水蓄能电站下水库泄洪洞的竖井作为研究对象,采用物理模型试验与数值模拟相结合的手段,分析了流态、流速、压力、消能率等水力指标。研究结果表明:宽式防旋墩引导水流平顺进入竖井形成脱壁流,其尾部可形成顺畅的进气通道,空气经此通道可充分进入竖井以保持井内流态与压力的稳定;新型竖井过流能力满足要求,各部位流速、压力分布正常,总消能率达85%以上;宽式防旋墩可消除不可控漩流导致的呛水现象并引导水流在竖井内形成脱壁流态,使竖井壁面免于空蚀破坏;墩尾通气量足够时,可取消通气管及环形堰与竖井结合部突扩体型,简化工程布置。相关经验可供类似抽蓄电站工程的泄洪洞竖井设计参考。

接立面转弯隧洞的侧式出水口水力特性

对于接立面转弯隧洞的侧式出水口,立面转弯隧洞的转弯段将直接影响侧式出水口的水力特性。若立面转弯隧洞参数设计不合理,极易导致侧式出水口内部发生流动分离。选取RSM紊流模型,针对接立面转弯隧洞的侧式出水口进行数值模拟,探究立面转弯隧洞曲率半径R、弯道后直隧洞长度L及转弯角度α等参数对出水口水力特性的影响规律,并对隧洞内流动过程进行了讨论。增加立面转弯隧洞曲率半径R和弯道后直隧洞长度L能显著改善出水口的水力指标。当曲率半径R≥12 D(D为隧洞直径)、弯道后直隧洞长度L≥16 D时,侧式出水口内部无明显流动分离,拦污栅断面流速分布均匀且无反向流速区。研究成果将对抽水蓄能电站侧式进/出水口的设计提供指导。

含废旧矿井抽蓄电站的源-荷-储协同控制调频研究

针对新能源在电网中渗透率不断提高导致系统调频容量和频率响应能力不足的问题,提出一种含废旧矿井抽蓄电站的源-荷-储协同控制调频方法。首先,建立了电解铝工业负荷、废旧矿井抽蓄电站和超级电容频率响应模型。然后,基于模型预测控制理论,以系统状态量和控制量的加权函数最小为目标,设计区域信息互动的分布式模型预测控制器,并提出含废旧矿井抽蓄电站的源-荷-储协同控制调频方法。最后,将分布式模型预测控制器应用在所提源-荷-储协同控制方法中,并在改进的IEEE标准两区域LFC模型中进行仿真。结果表明所提方法可以缩短频率恢复时间,减小最大频差值,改善系统调频动态性能。

新型电力系统下抽水蓄能电站高质量发展探究

为实现“双碳”目标,我国新能源装机规模快速增长,建设以新能源为主体的新型电力系统势在必行。新型电力系统中新能源大规模并网,对灵活性资源有了更高要求。抽水蓄能电站作为技术成熟的储能电站,在解决以新能源为主体的新型电力系统负荷波动方面发挥重要价值,能够同时应对源荷双侧的挑战。然而,抽水蓄能电站成本回收机制的不清晰对其发展模式造成阻碍,本文依据抽水蓄能电站在不同市场环境下的价值属性,对抽水蓄能电站成本回收机制提出建议,推动我国抽水蓄能产业可持续发展,满足新型电力系统建设需要。

抽水蓄能电站厂用电系统备自投设计及实现

大中型水电站厂用电系统接线复杂,备自投动作逻辑也不简单,同时还需考虑两级备自投之间的动作配合。针对某抽水蓄能电站10 kV及0.4 kV厂用电系统备自投的设计原则、动作逻辑等方面开展了研究,提出两级厂用电系统备自投间的定值及动作时间配合方案,可以保证电站厂用电系统的安全可靠运行。

抽水蓄能电站无压泄洪洞台阶消能型式研究

基于甘肃某抽水蓄能电站泄洪洞洞内消能设计,探讨在流量及底坡恒定的条件下,台阶尺寸与消能率的相关关系,探寻台阶尺寸的初拟原则,采用现行NB/T 10867-2021《溢洪道设计规范》中跌落流上限及滑行流下限的经验公式(坡角范围为2.86°~59.53°)进行台阶消能流态的初步判别,通过Chanson半经验公式理论计算和CFD数值模拟水工隧洞底板布置不同台阶尺寸对应的消能特性。结果表明:在流量及坡度不变的情况下,台阶尺寸(台阶步长及高度)对消能率的影响有限;台阶尺寸越大,水力要素受流动边界条件影响和扰动越明显;初拟台阶尺寸时,应分析水流掺气点位置及出现掺气均匀流位置随台阶尺寸变化向上游移动的速率,同时结合实际边界条件、便于施工及后期运维等方面综合考虑,台阶高差宜控制在0.20~0.60 m。

辽宁大雅河抽水蓄能电站对大雅河水库影响分析

本文以辽宁大雅河抽水蓄能电站利用已建大雅河水库作为下水库为例,对大雅河水利枢纽工程改造进行分析,以确保其作为下水库的可行性;并从施工期和正常运行期两个阶段对大雅河水利枢纽现有工程任务的影响作出分析,结果表明施工期对大雅河水利枢纽现有功能没有影响,正常运行期仅年发电量稍有减少,均未对征地移民产生影响。该成果为抽蓄电站建设与运营管理工作起到一定的指导作用,并可为同类工程工作的开展提供参考和借鉴。