Emission and capture characteristics of deep hole trap in n-GaN by optical deep level transient spectroscopy

Emission and capture characteristics of a deep hole trap(H1)in n-GaN Schottky barrier diodes(SBDs)have been investigated by optical deep level transient spectroscopy(ODLTS).Activation energy(Eemi)and capture cross-section(σ_(p))of H1 are determined to be 0.75 eV and 4.67×10^(−15)cm^(2),respectively.Distribution of apparent trap concentration in space charge region is demonstrated.Temperature-enhanced emission process is revealed by decrease of emission time constant.Electricfield-boosted trap emission kinetics are analyzed by the Poole−Frenkel emission(PFE)model.In addition,H1 shows point defect capture properties and temperature-enhanced capture kinetics.Taking both hole capture and emission processes into account during laser beam incidence,H1 features a trap concentration of 2.67×10^(15)cm^(−3).The method and obtained results may facilitate understanding of minority carrier trap properties in wide bandgap semiconductor material and can be applied for device reliability assessment.

In situ calibrated angle between the quantization axis and the propagating direction of the light field for trapping neutral atoms

The recently developed magic-intensity trapping technique of neutral atoms efficiently mitigates the detrimental effect of light shifts on atomic qubits and substantially enhances the coherence time. This technique relies on applying a bias magnetic field precisely parallel to the wave vector of a circularly polarized trapping laser field. However, due to the presence of the vector light shift experienced by the trapped atoms, it is challenging to precisely define a parallel magnetic field, especially at a low bias magnetic field strength, for the magic-intensity trapping of85Rb qubits. In this work, we present a method to calibrate the angle between the bias magnetic field and the trapping laser field with the compensating magnetic fields in the other two directions orthogonal to the bias magnetic field direction. Experimentally, with a constantdepth trap and a fixed bias magnetic field, we measure the respective resonant frequencies of the atomic qubits in a linearly polarized trap and a circularly polarized one via the conventional microwave Rabi spectra with different compensating magnetic fields and obtain the corresponding total magnetic fields via the respective resonant frequencies using the Breit–Rabi formula. With known total magnetic fields, the angle is a function of the other two compensating magnetic fields.Finally, the projection value of the angle on either of the directions orthogonal to the bias magnetic field direction can be reduced to 0(4)° by applying specific compensating magnetic fields. The measurement error is mainly attributed to the fluctuation of atomic temperature. Moreover, it also demonstrates that, even for a small angle, the effect is strong enough to cause large decoherence of Rabi oscillation in a magic-intensity trap. Although the compensation method demonstrated here is explored for the magic-intensity trapping technique, it can be applied to a variety of similar precision measurements with trapped neutral atoms.

Topological slow light and rainbow trapping of surface wave in valley photonic crystal bounded by air

Topological slow light and rainbow trapping tend to rely on large-scale interface structure in previous research work,which have restricted further miniaturization.In this work,we propose a method to realize slow light and rainbow trapping at the zigzag edge of a single valley photonic crystals(VPCs)bounded by air,which is very different from previous studies where rainbow trapping is supported at the interface separating two VPCs with inversion symmetry.By constructing the VPC–air boundaries and VPC–VPC interfaces experimentally,we have observed the topologically protected rainbow trapping simultaneously at the external and internal boundary.This work provides a feasible platform for the miniaturized optical communication devices such as optical buffers,optical storage and optical routing.

Crossroads:Pathogenic role and therapeutic targets of neutrophil extracellular traps in rheumatoid arthritis

Rheumatoid arthritis(RA)is a prevalent autoimmune disease whose main features include chronic synovial inflammation,bone destruction,and joint degeneration.Neutrophils are often considered to be the first responders to inflammation and are a key presence in the inflammatory milieu of RA.Neutrophil extracellular traps(NETs),a meshwork of DNA-histone complexes and proteins released by activated neutrophils,are widely involved in the pathophysiology of autoimmune diseases,especially RA,in addition to playing a key role in the neutrophil innate immune response.NETs have been found to be an important source of citrullinated autoantigen antibodies and inflammatory factor release,which can activate RA synovial fibroblasts(FLS)and cause joint damage.This article reviews the role of NETs in the pathophysiology of RA,demonstrating the application of multiple molecules with various therapies,with a view to informing the discovery and development of novel biomarkers and therapeutic targets for RA.

Hydrophobic CHA-ZIFs with a junctional trap between cha and d6r cages for adsorption of 2,3-butanediol in aqueous solution

The adsorption and separation of diols from dilute aqueous solution using hydrophobic materials is very challenging due to the strong diol-water hydrogen-bonding interactions. Herein, we screened hydrophobic zeolitic imidazolate frameworks(ZIFs) with chabazite(CHA) topology for separation of 2,3-butanediol(2,3-BDO) and 1,3-propanediol(1,3-PDO), which had junctional and hydrophobic traps matching the two end methyl groups of the 2,3-BDO molecule. Based on CHA-ZIFs with the same small-sized ligand 2-methylimidazole(mIm) and different large-sized ligand benzimidazole derivatives(RbIm),CHA-ZIFs with larger surface areas were obtained by the addition of excess small-sized ligand mIm in the synthesis process. We showed that all of the hydrophobic CHA-ZIFs preferentially adsorbed 2,3-BDO over 1,3-PDO by static batch adsorption and dynamic column adsorption experiments. But ZIF-301 and ZIF-300 with halogen groups exhibited better adsorptive separation performance for 2,3-BDO/1,3-PDO than ZIF-302 with methyl groups. For a typical ZIF-301, its adsorption capacity for 2,3-BDO was 116.4 mg·g^(-1)and selectivity for 2,3-BDO/1,3-PDO was 3.8 in dynamic column adsorption of the binary-component system(2,3-BDO/1,3-PDO: 50 g·L^(-1)/50 g·L^(-1)). Computational simulations revealed that 2,3-BDO preferentially adsorbed in a trap at the junction between the cha and d6r cages of CHA-ZIFs,meaning the strong host-guest interactions. Therefore, the hydrophobic CHA-ZIFs with a junctional trap were promising candidate materials for adsorbing 2,3-BDO, which also provided a new perspective for separating diols in dilute aqueous solutions.

Building and characterizing a stylus ion-trap system

Cold trapped ions can be excellent sensors for ultra-precision detection of physical quantities,which strongly depends on the measurement situation at hand.The stylus ion trap,formed by two concentric cylinders over a ground plane,holds the promise of relatively simple structure and larger solid angle for optical access and fluorescence collection in comparison with the conventional ion traps.Here we report our fabrication and characterization of the first stylus ion trap constructed in China,aiming for studying quantum optics and sensing weak electric fields in the future.We have observed the stable confinement of the ion in the trapping potential for more than two hours and measured the heating rate of the trap to be dε/dt=7.10±0.13 meV/s by the Doppler recooling method.Our work starts a way to building practical quantum sensors with high efficiency of optical collection and with ultimate goal for contributing to future quantum information technology.

Optimal preparation of Bose and Fermi atomic gas mixtures of ^(87)Rb and ^(40)K in a crossed optical dipole trap

We report on the optimal production of the Bose and Fermi mixtures with ^(87) Rb and ^(40)K in a crossed optical dipole trap(ODT).We measure the atomic number and lifetime of the mixtures in combination of the spin state |F=9/2,m_(F)=9/2> of^(40)K and |1,1>of ^(87) Rb in the ODT,which is larger and longer compared with the combination of the spin state |9/2,9/2> of^(40)K and 12,2) of ^(87)Rb in the ODT.We observe the atomic numbers of ^(87)Rb and ^(40)K shown in each stage of the sympathetic cooling process while gradually reducing the depth of the optical trap.By optimizing the relative loading time of atomic mixtures in the MOT,we obtain the large atomic number of ^(40)K(~6 ×10^(6)) or the mixtures of atoms with an equal number(~1.6 × 10^(6)) at the end of evaporative cooling in the ODT.We experimentally investigate the evaporative cooling in an enlarged volume of the ODT via adding a third laser beam to the crossed ODT and found that more atoms(8 × 10^(6)) and higher degeneracy(T/T_(F)=0.25) of Fermi gases are obtained.The ultracold atomic gas mixtures pave the way to explore phenomena such as few-body collisions and the Bose-Fermi Hubbard model,as well as for creating ground-state molecules of ^(87)Rb^(40)K.

Significance of including lid thickness and particle shape factor in numerical modeling for prediction of particle trap efficiency of invert trap

Sediment accumulation on the bed of open sewers and drains reduces hydraulic efficiency and can cause localized flooding.Slotted invert traps installed underneath the bed of open sewers and drains can eliminate sediment build-up by catching sediment load.Previous three-dimensional(3D)computational studies have examined the particle trapping performance of invert traps of different shapes and depths under varied sediment and flow conditions,considering particles as spheres.For two-dimensional and 3D numerical modeling,researchers assumed the lid geometry to be a thin line and a plane,respectively.In this 3D numerical study,the particle trapping efficiency of a slotted irregular hexagonal invert trap fitted at the flume bottom was examined by incorporating the particle shape factor of non-spherical sewage solid particles and the thicknesses of upstream and downstream lids over the trap in the discrete phase model of the ANSYS Fluent 2020 R1 software.The volume of fluid(VOF)and the realizable k-turbulence models were used to predict the velocity field.The two-dimensional particle image velocimetry(PIV)was used to measure the velocity field inside the invert trap.The results showed that the thicknesses of upstream and downstream lids affected the velocity field and turbulent kinetic energy at all flow depths.The joint impact of the particle shape factor and lid thickness on the trap efficiency was significant.When both the lid thickness and particle shape factor were considered in the numerical modeling,trap efficiencies were underestimated,with relative errors of-8.66%to-0.65%in comparison to the experimental values of Mohsin and Kaushal(2017).They were also lower than the values predicted by Mohsin and Kaushal(2017),which showed an overall overestimation with errors of-2.3%to 17.4%.

ANALYSIS OF PENTACHLOROPHENOL IN WATER BY PURGE AND TRAP CONCENTRATOR COUPLED TO GAS CHROMATOGRAPHY

It is convenient and time saving to analyze pentachlorophenol (PCP) in water by purge and trap concentrator coupled to gas chromatography that avoids employing a great deal of organic solvent. In this paper, the appropriate purge and trap conditions of PCP are determined: the trapped sorbent is TenaxGC; the purge gas is pure nitrogen and purge flow is 40ml/min; the purge time is 30min. A series of standard PCP water samples 5, 10, 50, 100, 200, 400, 800, 1000ppb are analyzed in order to obtain standard curve, and the linear regressive equation obtained is Y=109.65X-687.72, which correlation coefficient r is 0.9949. The precision of the method is determined with 0.5ppb PCP water sample, and the standard deviation measured is 3%. The detection limit for PCP is 0.2ppb.

Integrated Assessment of Trapping Efficiency of Colored Sticky Cards and Sex Pheromone on Liriomyza spp.and Plutella xylostella

[Objective] To evaluate the control effect of yellow sticky cards and sex pheromone on Plutella xylostella and Liriomyza spp.,which can provide reference for large area extension of the technique.[Method] The integrated assessment of trapping efficiency of colored sticky cards and sex pheromone on Liriomyza spp.and Plutella xylostella was conducted by field surveys and structured interview in Tonghai County,Yunnan Province,China.[Result] The results showed that yellow sticky cards and sex pheromone have strong power of trapping Liriomyza spp.and Plutella xylostella（3 414±720 and（219±157） head/piece,respectively）;the control cost by the usage of pesticide is the highest,（10 099.5±2 752.5） yuan/hm^2,yellow sticky cards and sex pheromone takes the second place,（1 125.0±465.0） yuan/hm^2,the control cost by the usage of yellow sticky cards is the lowest,（450.0 ±186.0）yuan/hm^2.Without the usage of yellow sticky cards and sex pheromone,pesticide application times and costs are（15.0±2.7） times and（12 070.5±2 136.0） yuan/hm^2;combined with usage of yellow sticky cards and sex pheromone,pesticide application times and costs reduce by 5.7 times and 4 618.5 yuan/hm^2.The ratio of trapped beneficial insects and target pests was 1 ∶1 131,which showed that the negative effect of yellow sticky cards and sex pheromone on the non-target insects was very limited.[Conclusion] The trapping approach has become popular among all the local farmers.Looking at the above factors,the trapping technology has strong application prospect and promotion value in pest control field.

Dependence of R-G Currenton Bulk Traps Characteristics and Silicon Film Structure in SOI Gated-Diode

The dependence of the Recombination- Generation( R- G) current on the bulk trap characteristics and sili- con film structure in SOI lateral p+ p- n+ diode has been analyzed num erically by using the simulation tool,DESSIS- ISE.By varying the bulk trap characteristics such as the trap density and energy level spectrum systematically,the dependence of the R- G current on both of them has been dem onstrated in details.Moreover,the silicon film doping concentration and thickness are changed to make silicon body varies from the fully- depletion m ode into the partial- ly- depletion one.The influence of the transfer of silicon body characteristics on the R- G currenthas also been care- fully examined.A better understanding is obtained of the behavior of bulk trap R- G current in the SOI lateral gat- ed- diode.

BG-Trap法与双层叠帐法对登革热媒介白纹伊蚊监测效果的比较

目的比较BG-trap法与双层叠帐法对登革热媒介白纹伊蚊的监测效果,进一步探讨BG-trap法用于登革热媒介伊蚊监测的可能性,为制定更有效的登革热防控策略提供参考依据。方法实验选取江苏省3个设区市的6个户外监测点,于8—9月的3天时间中,分别于每日16:00-16:30、17:00-17:30、18:00-18:30三个时段同步开展BG-Trap法和双层叠帐法监测。结果BG-Trap法和双层叠帐法均能够有效地捕获白纹伊蚊的雌蚊,双层叠账法捕获的白纹伊蚊占比高于BG-Trap法(χ^(2)=16.034,P<0.01),两种方法捕获的白纹伊蚊雌蚊构成比之间差异无统计学意义(χ^(2)=0.162,P=0.687)。BG-Trap法捕获的白纹伊蚊平均密度指数为7.85±5.23只/(台·h),低于双层叠帐法的27.04±13.86只/(顶·h),差异有统计学意义(t=6.73,P<0.001)。结论BG-Trap法对登革热媒介白纹伊蚊监测效果不及双层叠帐法,其能否应用于登革热媒介伊蚊监测有待于进一步研究。

BG-Trap法在伊蚊成蚊监测中的应用研究

目的采用BG-Trap法进行伊蚊监测,探讨该方法应用于登革热蚊媒常规监测和应急监测的可行性。方法在伊蚊监测场所用BG-Trap法分时段进行监测,用非参数统计分析的Chi-Square过程和t检验对监测结果进行统计和分析。结果应用BG-Trap法对伊蚊进行监测,15:00—17:00监测效果明显高于9:00—11:00(雌:χ^(2)=18963,df=1,P<0001;雄:χ^(2)=18667,df=1,P<0001;总体:χ^(2)=37500,df=1,P<0001);从12:00开始,按每小时一段统计诱蚊效果,以15:00—19:00时段对伊蚊引诱效果最好,平均捕蚊量为(618±21)只/h,平均小时诱蚊量与12:00—15:00有极显著的差异(雌:t=275,df=146,P<0001;雄:t=678,df=156,P<0001;总体:t=1016,df=304,P<0001)。结论可将BG-Trap法引入伊蚊的常规监测和应急监测。

Lacustrine Basin Slope Break — A New Domain of Strata and Lithological Trap Exploration

Based on the studies of the Songliao Basin characterized by Cretaceous down-warping, of the Jurassic compressional flexural Junggar basin and of the Bohai Bay Basin characterized by Paleogene rifting, the multiple-grades slope break has developed in lacustrine basins of different origins. Their genetic types can be divided into tectonic slope break, depositional slope break and erodent slope break. The dominant agent of the slope break is tectogenesis, and the scale of slope breaks relates with the size of tectogenesis. The results of the study show that control of mutual grades slope breaks on atectonic traps mainly represent: 1) Atectonic traps develop close to mutual grades slope breaks, with beads-shaped distribution along the slope breaks. 2) In the longitudinal direction, the development of atectonic traps is characterized by the inheritance. 3) Different slope breaks and their different geographical positions can lead to different development types of atectonic traps. 4) A slope break can form different kinds of atectonic traps because of its great lateral variation. 5) The existence of mutual-grade slope breaks leads to different responses of erosion and deposition at different geographical positions in the basin. The oil source bed, reservoir and cap rock combination of atectonic traps is fine. 6) The oil-bearing condition of atectonic traps controlled by slope breaks is very favorable.

Fault zone structures of northern and southern portions of the main central fault generated by the 2008 Wenchuan earthquake using fault zone trapped waves

The rupture process of the May 12, 2008 Ms8.0 Wenchuan earthquake was very complex. To study the rupture zones generated by this earthquake, four dense temporary seismic arrays across the two surface breaking traces of the main-shock were deployed in July and recorded a great amount of aftershocks. This paper focuses on the data interpretation of two arrays across the central main fault, the northern array line 1 and southern array line 3. The fault zone trapped waves recorded by the two arrays were used to study the structure of the central main fault and the difference between the northern and southern portions. The results show that the widths of the rupture zone are about 170-200 m and 200-230 m for northern and southern portions respectively. And the corresponding dip angles are 80° and 70°. The seismic velocity inside the fracture zone is about one half of the host rock. By comparison, the northern portion of the rupture zone is slightly narrower and steeper than the southern portion. Besides these differences, one more interesting and important difference is the positions of the rupture zone with respect to surface breaking traces. At the northern portion, the rupture zone is centered at the surface breaking trace, while at the southern portion it is not but is shifted to the northwest. This difference reflects the difference of rupture behaviors between two portions of the central main fault. The width of the rupture zone is smaller than that of MS.1 Kunlun earthquake though these two earthquakes have almost the same magnitudes. Multiple ruptures may be one factor to cause the narrower rupture zone.

A Method to Separate Effects of Oxide-Trapped Charge and Interface-Trapped Charge on Threshold Voltage in pMOSFETs Under Hot-Carrier Stress

A simple new method based on the measurement of charge pumping technique is proposed to separate and quantify experimentally the effects of oxide-trapped charges and interface-trapped charges on threshold voltage degradation in p-channel metal-oxide-semiconductor field-effect transistors (pMOSFETs) under hot-carrier stress.Further,the experimental results verify the validness of this method.It is shown that,all three mechanisms of electron trapping effect,hole trapping effect and interface trap generation play important roles in p-channel MOSFETs degradation.It is noted that interface-trapped charge is still the dominant mechanism for hot-carrier-induced degradation in p-channel MOSFETs,while a significant contribution of oxide-trapped charge to threshold voltage is demonstrated and quantified.

Addition of cerium and yttrium to ferritic steel weld metal to improve hydrogen trapping efficiency

The applicability of Ce and Y as promising candidate elements to form irreversible traps in weld metal was investigated by thermal desorption spectroscopy(TDS) with gas chromatography(GC). The precise nature of the precipitate particles newly formed in the weld metal by the addition of Ce and Y to a certain alloy system was characterized. Moreover,the hydrogen trapping efficiency expressed as the reduction of the diffusible hydrogen in the weld metal was analyzed. The results showed that the addition of Ce and/or Y to this alloy system led to the formation of a mixed type of(Ce,Ti)-based oxide,(Y,Ni)-based carbide,or(Ce,Y,Ti)-based oxide particles. Because of the high activation energy of the mixed type of particles(≥ 150 k J/mol),the trapping efficiency for hydrogen was considered to be sufficiently high to effectively reduce the diffusible hydrogen content.

Single atoms transferring between a magneto-optical trap and a far-off-resonance optical dipole trap

Based on our work on single cesium atoms trapped in a large-magnetic-gradient vapour-cell magneto-optical trap （MOT）, the signal-to-noise ratio （SNR） is remarkably improved. Also a far-off-resonance optical dipole trap （FORT） formed by a strongly-focused 1064 nm single frequency Nd：YVO4 laser beam is introduced. One cesium atom is prepared in the MOT, and then it can transfer successfully between the MOT and the FORT which is overlapped with the MOT. Utilizing the effective transfer, the lifetime of single atoms trapped in the FORT is measured to be 6.9± 0.3 s. Thus we provide a system where the atomic qubit can be coherently manipulated.

Rock Damage Structure of the South Longmen-Shan Fault in the 2008 M8 Wenchuan Earthquake Viewed with Fault-Zone Trapped Waves and Scientific Drilling

This article is to review results from scientific drilling and fault-zone trapped waves （FZTWs） at the south Longman-Shan fault （LSF） zone that ruptured in the 2008 May 12 M8 Wenchuan earthquake in Sichuan,China.Immediately after the mainshock,two Wenchuan Fault Scientific Drilling （WFSD） boreholes were drilled at WFSD-1 and WFSD-2 sites approximately 400 m and 1 km west of the surface rupture along the Yinxiu-Beichuan fault （YBF）,the middle fault strand of the south LSF zone.Two boreholes met the principal slip of Wenchuan earthquake along the YBF at depths of 589-m and 1230-m,respectively.The slip is accompanied with a 100-200-m-wide zone consisting of fault gouge,breccia,cataclasite and fractures.Close to WFSD-1 site,the nearly-vertical slip of ～4.3-m with a 190-m wide zone of highly fractured rocks restricted to the hanging wall of the YBF was found at the ground surface after the Wenchuan earthquake.A dense linear seismic array was deployed across the surface rupture at this venue to record FZTWs generated by aftershocks.Observations and 3-D finite-difference simulations of FZTWs recorded at this cross-fault array and network stations close to the YBF show a distinct low-velocity zone composed by severely damaged rocks along the south LSF at seismogenic depths.The zone is several hundred meters wide along the principal slip,within which seismic velocities are reduced by ～30-55％ from wall-rock velocities and with the maximum velocity reduction in the ～200-m-wide rupture core zone at shallow depth.The FZTW-inferred geometry and physical properties of the south LSF rupture zone at shallow depth are in general consistent with the results from petrological and structural analyses of cores and well log at WFSD boreholes.We interpret this remarkable low-velocity zone as being a break-down zone during dynamic rupture in the 2008 M8 earthquake.We examined the FZTWS generated by similar earthquakes before and after the 2008 mainshock and observed that seismic velocities within fault core zone was reduced by ～10％ due to severe damage of fault rocks during the M8 mainshock.Scientific drilling and locations of aftershocks generating prominent FZTWs also indicate rupture bifurcation along the YBF and the Anxian-Guangxian fault （AGF）,two strands of the south LSF at shallow depth.A combination of seismic,petrologic and geologic study at the south LSF leads to further understand the relationship between the fault-zone structure and rupture dynamics,and the amplification of ground shaking strength along the low-velocity fault zone due to its waveguide effect.

Trap distribution of polymeric materials and its effect on surface flashover in vacuum

The surface trap parameter can significantly affect the development of surface flashover in vacuum,but the effective mode and mechanism are not very clear yet.The trap parameters of three polymeric materials were tested and calculated by means of isothermal surface potential decay.The flashover experiment was developed under different applied voltages.The results show a positive correlation between the withstand voltage and the deep trap,i.e.,the deeper trap energy level is,the higher flashover voltage is.The dynamics process of charge trapping and detrapping was analyzed based on the charge transport model in dielectrics with a single trap level and two discrete trap levels.The time of charge trapping was compared with that of the discharge development.The results show that the charge trapping time is longer than the flashover development time.The way to influence flashover for a trap is not to decrease the secondary electrons in single discharge development,but to change the electric field distribution on the dielectric surface by charge capture.