Preparation of Purified and Inactivated HP-PRRS Vaccine

[Objective] The aim of this study was to improve the purification and protective potency of HP-PRRS inactivated vaccine. [Method] HP-PRRS virus that had been multiplied inside Marc-145 cells was collected and concentrated 50 times and then inactivated. Complete virions were separated and collected by chromatography with Sepharose 4 Fast Flow. Oil adjuvant was added to prepare purified inactivated vaccine. [Result] Viral protein was separated from other proteins by purification and the viral protein contents ranged from 76.7% to 82.4%, and 96% of the expected serum proteins were removed. Protective potency of purified vaccine was above 4/5 and positive conversion rate of antibody was over 86%, both higher than that of unpurified vaccine. The differences were significant. [Conclusion] The experiment il-lustrated that the immune efficacy of vaccine can be enhanced through concentrat- ing and purifying, while the non-viral protein can be removed, so that allergic reaction and stress response cadsed by vaccine inoculation can be avoided.

Recyclable adsorbent of BiFeO_3/Carbon for purifying industrial dye wastewater via photocatalytic reproducible

It is essential to prepare highly-efficiency reproducible adsorbent for purifying industrial dye wastewater. In this work, biscuit with a layered porous structure as a template is applied to prepare a photocatalytic recyclable adsorbent of BiFeO3/Carbon nanocomposites for purifying simulative industrial dye wastewater. It is found that the structure of the prepared BiFeO3/Carbon nanocomposite is related to the natural structure of the biscuit, annealing temperatures and immersing times, demonstrated by XRD, TEM, UV-Vis and adsorptive activities. Kinetics data shows that the adsorption rate of the adsorbent to the dye is rapid and fitted well with the pseudo-second-order model, that more than 80% of dyes can be removed in the beginning 30 min. The adsorption isotherm can be perfectly described by the Langmuir model as well. It can be seen from the adsorption data that the adsorption performance can reach over 90% at pH ? 2–12, which can imply its universal utilization. The prepared BiFeO_3/Carbon nanocomposites have also displayed excellent capacities(over 90% within 30 min) for adsorption of seven different dyes and their mixed one. According to the five times photocatalytic reproducible experiments, it is proved that BiFeO_3/Carbon nanocomposites show the excellent stability and reproduction for purifying simulative industrial dyes, even the sample have been placed for one year. These research results indicate that the adsorbent BiFeO_3/Carbon can be a suitable material used in treating industrial dye wastewater potentially.

Dynamic Simulation and Analysis of Industrial Purified Terephthalic Acid Solvent Dehydration Process

Dynamic model for dehydration process of industrial purified terephthalic acid solvent is investigated to understand and characterize the process.A temperature differential expression is presented,which ensures the equation to convergence and short computation time.The model is used to study the dynamic behavior of an azeotropic distillation column separating acetic acid and water using n-butyl acetate as the entrainer.Responses of the column to feed flow and aqueous reflux flow are simulated.The movement of temperature front is also simulated.The comparison between simulation and industrial values shows that the model and algorithm are effective.On the basis of simulation and analysis,control strategy,online optimization and so on can be implemented effectively in dehydration process of purified terephthalic acid solvent.

Preparation of 5N high purified indium by the method of chemical purification-electrolysis

The application of indium requires high purity indium as material.5N high purity indium had been prepared by the method of acombination of chemically smelting and electrolysis. Smelting timewas 10 min, the abstraction rate of cadmium was 80/100-90/100 whenused solution of I_2-KI and glycerine to smelt indium. 4N metalindium was used as anode, high purity indium as cathode, In-2(SO_4)_3-H_2SO_4 system as electrolyte, and In content is 100 g/L, pH2-3 and current density 80-100 a/m^2.

Fuzzy Neural Network Model of 4-CBA Concentration for Industrial Purified Terephthalic Acid Oxidation Process

A fuzzy neural network (FNN) model is developed to predict the 4-CBA concentration of the oxidation unit in purified terephthalic acid process. Several technologies are used to deal with the process data before modeling.First,a set of preliminary input variables is selected according to prior knowledge and experience. Secondly,a method based on the maximum correlation coefficient is proposed to detect the dead time between the process variables and response variables. Finally, the fuzzy curve method is used to reduce the unimportant input variables.The simulation results based on industrial data show that the relative error range of the FNN model is narrower than that of the American Oil Company (AMOCO) model. Furthermore, the FNN model can predict the trend of the 4-CBA concentration more accurately.

Multi-objective Optimization of Industrial Purified Terephthalic Acid Oxidation Process

Multi-objective optimization of a purified terephthalic acid (PTA) oxidation unit is carried out in this paper by using a process modei that has been proved to describe industrial process quite well. The modei is a semi-empirical structured into two series ideal continuously stirred tank reactor (CSTR) models. The optimal objectives include maximizing the yield or inlet rate and minimizing the concentration of 4-carboxy-benzaldhyde, which is the main undesirable intermediate product in the reaction process. The multi-objective optimization algorithra applied in this study is non-dominated sorting genetic algorithm Ⅱ (NSGA-Ⅱ). The performance of NSGA-Ⅱ is further illustrated by application to the title process.

Purified terephthalic acid wastewater biodegradation and toxicity

The biodegradation and toxicity of the purified terephthalic acid（PTA） processing wastewater was researched at NJYZ pilot with the fusant strain Fhhh in the carrier activated sludge process（ CASP）. Sludge loading rate（SLR） for Fhhh to COD of the wastewater was 1.09 d^-1 and to PTA in the wastewater was 0.29 d^-1. The results of bioassay at the pilot and calculation with software Ebis3 showed that the 48h-LC50 （median lethal concentration） to Daphnia magna for the PTA concentration in the wastewater was only 1/10 of that for the chemical PTA. There were .5 kinds of benzoate pollutants and their toxicities existing in the wastewater at least. The toxicity parameter value of the pure chemical PTA cannot be used to predicate the PTA wastewater toxicity. The toxicity of the NJYZ PTA wastewater will be discussed in detail in this paper.

Mechanical Properties,Purifying Techniques and Processing Methods of Metal Yttrium

The mechanical properties of metal yttrium such as strength, plasticity, hardness and elasticity were introduced . The purifying techniques of yttrium were discussed in detail. The processing methods for metal yttrium including extruding, forging, rolling, wiredrawing and welding were also introduced. Finally, the potential use of yttrium and its alloys were prospected.

Research and Implementation of Decreasing the Acetic Acid Consumption in Purified Terephthalic Acid Solvent System

Decreasing the acetic acid consumption in purified terephthalic acid （PTA） solvent system has become a hot issue with common concern. In accordance with the technical features, the electrical conductivity is in direct proportion to the acetic acid content. General regression neural network （GRNN） is used to establish the model of electrical conductivity on the basis of mechanism analysis, and then particle swarm optimization （PSO） algorithm with the improvement of inertia weight and population diversity is proposed to regulate the operating conditions. Thus, the method of decreasing the acid loss is derived and applied to PTA solvent system in a chemical plant. Cases studies show that the precision of modeling and optimization are higher. The results also provide the optimal operating conditions, which decrease the cost and improve the profit.

Purification and Characterization of Angiotensin I Converting Enzyme Inhibition Peptides from Sandworm Sipunculus nudus

Three angiotensin I converting enzyme(ACE) inhibition peptides were isolated from sandworm Sipunculus nudus protein hydrolysate prepared using protamex. Consecutive purification methods, including size exclusion chromatography and reverse-phase high performance liquid chromatography(RP-HPLC), were used to isolate the ACE inhibition peptides. The amino acid sequences of the peptides were identified as Ile-Asn-Asp, Val-Glu-Pro-Gly and Leu-Ala-Asp-Glu-Phe. The IC_(50) values of the purified peptides for ACE inhibition activity were 34.72 μmol L^(-1), 20.55 μmol L^(-1) and 22.77 μmol L^(-1), respectively. These results suggested that S. nudus proteins contain specific peptides that can be released by enzymatic hydrolysis. This study may provide an experimental basis for further systematic research, rational development and clinical utilization of sandworm resources.

Gas Purification and Quality Control of the End Gas Product

One of the main problems in the flow-through gas purification technologies is related with continuous control of the outlet gas purity. The information concerning purity of the produced gas is on high demand, e.g., for processing systems integrated with gas purifiers. The positive solution of this problem has become possible only now due to the appearance of reactive getters (reactants) that serve as highly efficient sinks for gas impurities and our sorption model of the processes, which take place in gas purifiers with these reactants. According to the given model the appearance of a single valued functional connection between the purity of the gas product and the duration of the treatment of the gas flow by the sorbing powder is typical for any system Me -Y, where Me is a powder reactant and Y is an impurity gas. This strict correlation provides the mathematical justification to a simple method of determining the concentration of the impurity in the gas flow at the exit from the gas purifier. This method comes down to measuring of the quantity of the purified gas by a gas flow meter, the readings of which are graduated in the units of gas concentration.

Study on Acute Toxicity of Purified Protein HAS1 Expression in KM Mice

[Objectives]The antifungal protein HAS1 newly obtained was evaluated for acute toxicity safety in KM mice according to relevant national regulations,so as to eliminate people s concerns about the safety of transgenic plants.[Methods]The acute toxicity of the purified protein HAS1 was observed by intragastric administration of mice,and the poisoning symptoms,poisoning degree,recovery and death were observed.[Results]No abnormal toxicity symptoms were observed in the test group,the vehicle control group and the blank control group.The main tissues and organs were not abnormal in gross anatomy.The average body weight of each group showed an increasing trend compared with before administration at 1,3,7,11 and 14 d after administration.It was found that after giving the purified protein HAS1 to KM mice at a cumulative dose of 64 mg/kg a day,no obvious toxicity was observed in the acute toxicity test,indicating that the test substance was non-toxic by oral administration.[Conclusions]This study provides a basis for further use of the protein and its coding genes.

Experimental Study on Purification Efficiency of Air Purifier for the Indoor Total Volatile Organic Compounds

By using total volatile organic compounds （TVOC） as the objective volatile pollutant, the purification efficiency of some representative air purifiers bought in the market was determined under the relatively independent and stable environmental conditions supplied by the self-made multi- functional environmental test chamber. Various evaluation parameters of TVOC were calculated based on the tested results, such as purification ef- ficiency and removal rate. The results showed that the TVOC purification efficiency increased with enhancing the temperature or lessening the rela- tive humidity, but this effect is not obvious. The air purifiers which use photocatalytic technology have higher TVOC purification efficiency than those which only use some adsorption technology. The purification efficiency and removal rate can be more accurate to evaluate the purification efficiency of air purifiers.

Practical Mitigation Strategies for Countering the Spread of Aerosolized COVID-19 Virus (SARS-CoV-2) Using Ventilation and HEPA Air Purifiers: A Literature Review

This paper assesses, through an extensive literature review, the use of ventilation and High-Efficiency Particulate Air (HEPA) purifiers as practical mitigation strategies for reducing the spread of aerosolized COVID-191 virus. HEPA is a well-defined standard by the U.S. Department of Energy for filters. The focus of the literature review was on indoor air quality (IAQ) and COVID-19, with a particular emphasis on classroom settings. The start of the review, January 2020, was chosen to coincide with the first cases of COVID-19 in North America. Although children under the age of 12 are currently not yet vaccinated, there is mounting pressure for a return to normal by the start of the new school year, 2021. Also, many classrooms lack pre-installed mechanical ventilation systems (Olsiewski et al., 2021);therefore, mitigation in classrooms often falls solely in the hands of teachers and students. Research shows that ventilation and air purification are essential tools to counter aerosolized transmission (<5 μm) of the COVID-19 virus. According to Curtius et al. (2020), the inhaled dose of particles containing virus RNA is six times lower when using air purifiers with an ACH (air changes per hour) of 5.7. However, ventilation and air purifiers are not replacements for masks, which remain vital for countering droplet (>5 μm) transmission. In addition, occupancy (i.e., number and proximity of people present in a given area) and group activity levels (e.g., talking, shouting, singing) play a critical role in viral transmission. Although natural ventilation by opening windows can be an essential strategy to help counter the spread of the virus, the level of ventilation offered by opening windows is largely uncontrollable as it is subject to weather conditions and building design. One must also consider the energy implications (i.e., loss of heat) that this strategy carries. Scientific evidence shows that varying levels of continuous and/or intermittent ventilation, either mechanical or natural, combined with the use of HEPA air purifiers, can provide a higher degree of protection than window access alone (Curtius et al., 2020). Systematic deployment of a hybrid mitigation strategy incorporating both ventilation and HEPA air purification in schools, offices, or other facilities offers a practical way to establish a safe re-opening of society in Canada.

Microstructure Features with Ultrafined and Purified Grains for Si-Mn Hot-rolling TRIP Steel

The advanced hot-rolled transformation induced plasticity （TRIP） steel with high tensile strength of 775 MPa, high elongation of 29% and low ductile-brittle transmission temperature less than -80℃ has been developed in laboratory based on the common silicon and manganese chemical composition. The experimental results showed that the microstructures were featured with ultra fine grain size less than 5μm, appropriate retained austenite volume fraction around 11.8% and purified ferrite grain, which may result in well balanced mechanical properties for the steel.

PURIFICATION AND SOME PROPERTIES OF Fe PROTEIN OF NITROGENASE FROM Anabaena cylindrica

The Fe protein of Anabaena cylindrica was first separated and purified by chromatography through DEAE-cellulose columns then by gel electrophoresis.The specific activity was up to 142.46 nmol C2H4/mg protein . min. It was homogeneous as shown by 1 )a single band in the gel electrophorogram ; 2)absence ofMo and tryptophan ;3)content of about 3.4 atoms ofFe per mole protein.The molecular weight of the Fe protein of A . cylindrica was about 61,000 daltons as estimated by SDS-gel electrophoresis and calculated from the amino acid composition. The residues of aspartate and glutamate were about 2.6 times that of arginine and lysine in the Fe protein. Crossing Fe protein of A . cylindrica with Mo-Fe protein of Azotobacter vinelandii gave positive result. The reciprocal crossing also showed activity.

Genomic Mutations Within the Host Microbiome: Adaptive Evolution or Purifying Selection

Next-generation sequencing technology has transformed our ability to assess the taxonomic composition functions of host-associated microbiota and microbiomes. More human microbiome research projects—particularly those that explore genomic mutations within the microbiome—will be launched in the next decade. This review focuses on the coevolution of microbes within a microbiome, which shapes strain-level diversity both within and between host species. We also explore the correlation between microbial genomic mutations and common metabolic diseases, and the adaptive evolution of pathogens and probiotics during invasion and colonization. Finally, we discuss advances in methods and algorithms for annotating and analyzing microbial genomic mutations.

Scheme for purifying a general mixed entangled state and its linear optical implementation

We propose a scheme for purification of a general mixed entangled state. In this scheme, we start from a large number of general mixed entangled states and end up, after local operation and classical communication, with a smaller number of Bell diagonal states with higher entanglement. In particular, the scheme can purify one maximally entangled state from two entangled pairs prepared in a class of mixed entangled state. Furthermore we propose a linear optical implementation of the present scheme with polarization beam splitters and photon detectors.

Clinical Observation on the Improved Short-Term Effects of Anti-Tumor Purified Chinese Medicine Injection Ai-Jing for 138 Cases with Malignant Tumors

The subjects of this study were to observe the improved short-term effects of anti-tumor purified Chinese medicine injection Ai-Jing for 138 cases with malignant tumors. This was a multi-center clinical study, and a total of 138 patients included 96 males and 42 females, with the age from 60 to 76 years. Ai-Jing has obtained the Chinese invention patent since 2008 (ZL991-03528.3). A novel technique acupoint injection method was adopted. Except for lung cancer, patients with other malignant tumors were injected once every other day, 2 ml each time. A course of treatment needs 6 Ai-Jing injections, lung cancer patients need 10 - 20 Ai-Jing injections. At the same time, patients were treated with traditional medicine decoction. Due to the limited number of cases, cure rate, recovery rate and remission rate were calculated as a whole, respectively 18.12%, 44.20% and 32.15%. All the invalid patients were lung cancer, accounting for 16.67% of the patients treated with lung cancer, and the total treatment inefficiency was 6.52%. Conclusion: Chinese Medicine Injection Ai-Jing extracts the effective components of anti-cancer and tumorigenesis, and has the effects of anti-cancer and tumorigenesis, anti-inflam-matory and analgesic, and repairing body damage, with small toxic and side effects and low cost.