Rapid accuracy determining DNA purity and concentration in heavy oils by spectrophotometry methods

DNA analysis is the core of biotechnology applied in petroleum resources and engineering. Traditionally accurate determination of DNA purity and concentration by spectrometer is the first and critical step for downstream molecular biology research. In this study, three different spectrophotometry methods, BPM, NDTT and NPMTTZ were compared for their performance in determining DNA concentration and purity in 32 oil samples, and molecule methods like quantitative real-time PCR (qPCR) and high-throughput sequence were also performed to help assess the accuracy of the three methods in determining DNA concentration and purity. For ordinary heavy oil (OHO), extra heavy oil (EHO) and super heavy oil (SHO), the characteristics of high viscosity (η), density (ρ) and resin plus asphaltene content will affect the DNA extraction and UV determination. The DNA concentration was decreased as density increased: OHO (11.46 ± 18.34 ng/μL), EHO (6.68 ± 9.67 ng/μL) and SHO (6.20 ± 7.83 ng/μL), and the DNA purity was on the reverse: OHO (1.31 ± 0.27), EHO (1.54 ± 0.20), and SHO (1.83 ± 0.32). The results suggest that spectrophotometry such as BPM and NPMTTZ are qualitatively favorite methods as the quick non-consumable methods in determining DNA concentration and purity of medium oil and heavy oil.

Effect of Al addition on corrosion behavior of high-purity Mg in terms of processing history

In this study,the effects of Al addition on the corrosion behavior of pure Mg with controlled impurity contents were systematically analyzed according to the processing history.The results revealed that the corrosion behavior of high-purity Mg-Al alloys is strongly related to changes in the microstructure,including theβphase and Al-Mn or Al-Fe phases,and the protectiveness of the surface film according to the Al content and processing history.In the as-cast alloys,the corrosion rate increased due to the increase ofβphase as the Al content increased,but in the as-extruded alloys,the corrosion rate,which was high due to intermetallic compounds caused by impurities in the low Al alloy,decreased as the Al content increased,and then increased again.This is due to the combined effect of the increase of theβphase and decrease of the impurity effect,and the increase of the dissolved Al content.The results suggest that it is necessary to analyze the effect of alloying elements on the corrosion behavior of pure Mg with information concerning the impurity content and processing history.

Visualizing and witnessing first-order coherence,Bell nonlocality and purity by using a quantum steering ellipsoid in the non-inertial frame

A quantum steering ellipsoid(QSE)is a visual characterization for bipartite qubit systems,and it is also a novel avenue for describing and detecting quantum correlations.Herein,by using a QSE,we visualize and witness the first-order coherence(FOC),Bell nonlocality(BN)and purity under non-inertial frames.Also,the collective influences of the depolarizing channel and the non-coherence-generating channel(NCGC)on the FOC,BN and purity are investigated in the QSE formalism.The results reveal that the distance from the center of the QSE to the center of the Bloch sphere visualizes the FOC of a bipartite system,the lengths of the QSE semiaxis visualize the BN,and the QSE's shape and position dominate the purity of the system.One can capture the FOC,BN and purity via the shape and position of the QSE in the non-inertial frame.The depolarizing channel(the NCGC)gives rise to the shrinking and degradation(the periodical oscillation)of the QSE.One can use these traits to visually characterize and detect the FOC,BN and purity under the influence of external noise.Of particular note is that the condition for the QSE to achieve the center of the Bloch sphere cannot be influenced by the depolarizing channel and the NCGC.The characterization shows that the conditions for the disappearance of the FOC are invariant under the additional influences of the depolarizing channel and NCGC.

Accurate quantification of TiO_(2)(B)'s phase purity via Raman spectroscopy

Bronze phase titanium dioxide(TiO_(2)(B))could be a promising high-power anode for lithium ion battery.However,TiO_(2)(B)is a metastable material,so the as-synthesized samples are inevitably accompanied by the existence of anatase phases.It has been found that the TiO_(2)(B)'s purity is positively correlated with its electrochemical performance.Herein,we have established an accurate quantification of the TiO_(2)(B)/anatase ratio,by figuring out the function between the purity of TiO_(2)(B)phase in the high purity range and its Raman spectra features in combination of the calibration by the synchrotron radiation X-ray diffraction(XRD).Compared with the time-consuming electrochemical method,the rapid,sensitive and non-destructive features of Raman spectroscopy have made it a promising candidate for determining the purity of TiO_(2)(B).Further,the correlations developed in this work should be instructive in synthesizing pure TiO_(2)(B)and furthermore optimizing its electrochemical charge storage properties.

大中小学英语“课程思政”一体化PURITY模式的构建研究——基于教师专业学习共同体视角

大中小学“课程思政”一体化建设越来越受到学界的关注,英语学科作为“大思政”格局中重要的一部分,对学生意识形态和价值观的引领起着重要的作用。本研究在当前大中小学课程思政一体化研究的基础上,从教师专业学习共同体视角,构建了大中小学英语“课程思政”一体化PURITY模式,该模式基于教师专业学习共同体的支持性条件、共同体成员、目标、专业运用与实践四个维度来实现。通过两学期的实践探索发现,PURITY模式有效地达成了理论—实践融合的目标,增强了大中小学英语教师的交流与合作,节约了资源的利用,促进大中小学英语教师专业发展。

Modification Behavior of Trace Rare Earth on Impurity Phases in Commercial Purity Aluminum

Modifying effect and mechanism of trace rare earth on Fe(Si) rich impurity phases in commercial purity aluminum were studied with the aids of SEM, EDAX, TEM, etc. It is found that Ce rich mixed rare earth (RE) is an effective modifying agent, which makes the coarse Fe rich impurity phases transform into complex compounds of tiny, sphere/short stick form, thus improving mechanical properties of this material; its modifying mechanism is in that RE gathering in front of solid/liquid interface enters into the impurity phases, forming complex (AlFeSiRE) compounds; or is adsorbed in the impurity phases surface, impeding the growth of impurity phases; however, excessive RE will result in the increasing of RE compounds (secondary phases), and plasticity reduction of this material. Therefore, its addition amount should be less than 0 07% (mass fraction).

Quantification of trace amounts of impurities in high purity cobalt by high resolution inductively coupled plasma mass spectrometry

A An analytical method using high resolution inductively coupled plasma mass spectrometry （HR-ICP-MS） for rapid simultaneous determination of 24 elements （Be, Mg, A1, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Ge, As, Se, Mo, Ag, Cd, Sn Sb, Ba, Pt, Au, and Pb） in high purity cobalt was described. Sample digestions were performed in closed microwave vessels using HNO3 and HCI. The matrix effects because of the presence of excess HCI and Co were evaluated. The usefulness of high mass resolution for overcoming some spectral interference was demonstrated. The optimum conditions for the determination were tested and discussed. The standard addition method was employed for quantitative analysis. The detection limits were 0.016-1.50 ].tg·g^-1, the recovery ratios were 92.2%-111.2%, and the RSD was less than 3.6%. The method was accurate, quick, and convenient. It was applied to the determination of trace impurities in high purity cobalt with satisfactory results.

Study on Interaction between Lanthanum and Phosphor in Purity Steel

Using SEM and EDS some particles containing La and P were discovered in low oxygen and sulfur purity steel with lanthanum. In these particles low melting point elements such as As and Sb also were detected. According to the result of simulative calculation of segregation, it is shown that La and P enrich so strongly in the process of solidification that their concentrations can satisfy thermodynamic condition to forme LaP compound or meet the requirements to forme eutectic phase in the last stage of solidification. Therefore, the particles are concluded as LaP compound or eutectics, which exist on grain boundary mainly.

Identification and Purity Test of Super Hybrid Rice with SSR Molecular Markers

Five super hybrid rice combinations, i.e. HYS-1/R105, Pei'ai 64S/E32, Liangyoupeijiu (Pei'ai 64S/9311), 88S/0293, and J23A/Q611, and their parental lines were tested by means of SSR analysis. A total of 144 SSR primer pairs distributed on 12 rice chromosomes were used, out of which 47 detected polymorphism among the tested rice lines. Among all these primers, RM337 and RM154 produced polymorphic patterns in four or more of the tested experimental materials respectively, and they could distinguish among most rice genotypes tested. Twenty-four primer pairs, two on each rice chromosome, were selected to make a reference SSR marker-based fingerprinting for the rice lines. For most of the primer pairs, F1 hybrids mainly showed complementary pattern of both parents, which could be very useful to distinguish the F1 from its parental lines. In addition, 5 primer pairs were selected as special primer pairs for five hybrid rice combinations respectively. By combining the rapid, simple method on DNA extraction, it is suggested that SSR technique has wide prospective in variety authentication and purity identification.

Equilibrium between titanium ions and high-purity titanium electrorefining in a NaCl-KCl melt

TiClx （x=2.17） was prepared by using titanium sponge to reduce the concentration of TiCl4 in a NaCl-KCl melt under negative pressure. The as-prepared NaCl-KCl-TiClx melt was employed as the electrolyte, and two parallel crude titanium plates and one high-purity titanium plate were used as the anode and cathode, respectively. A series of electrochemical tests were performed to investigate the influence of electrolytic parameters on the current efficiency and quality of cathodic products. The results indicated that the quality of cathodic products was related to the current efficiency, which is significantly dependent on the current density and the initial concentration of titanium ions. The significance of this study is the attainment of high-purity titanium with a low oxygen content of 30× 10^-6.

Quantification of Trace Amounts of Impurities in High Purity Cobalt by High Resolution Inductively Coupled Plasma Mass Spectrometry

An analytical method using high resolution inductively coupled plasma mass spectrometry （HR-ICP-MS） for rapid simultaneous determination of Be, Mg, Al, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Ge, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pt, Au and Pb in high purity cobalt was described. Sample digestions were performed in closed microwave vessels using HNO3 and HCl. The matrix effects due to the presence of excess HCl and Co were evaluated. The usefulness of high mass resolution for overcoming some spectral interference was demonstrated. The optimum conditions for the determination was tested and discussed. Correction for matrix effects, Sc, Rh and Bi were used as internal standards. The detection limits is 0.003-0.57 μg/g, the recovery ratio is 92.2%-111.2%, and the RSD is less than 3.6%. The method is accurate, quick and convenient. It has been applied to the determination of trace impurities in high purity cobalt with satisfactory results.

Photocatalytic Degradation of Rhodamine B Dye with High Purity Anatase Nano-TiO_2 Synthesized by a Hydrothermal Method

High purity anatase nano-TiO2 powders with high photocatalytic activity were prepared by a hydrothermal synthesis method. X-ray diffraction （XRD）, field emission transmission electron microscopy （FETEM）, ultraviolet-visible （UV-Vis） light absorption spectrum and photoluminescence （PL） spectrum were adopted to characterize the catalyst. Effects of temperature, time and sol concentration of hydrothermal synthesis on particle size and phases were investigated. Photocatalytic activities in the degradation of Rhodamine B Dye were studied. The experimental results indicated that photocatalytic activity of the nano-TiO2 powers was much higher than that of P25 （Degussa）.

Simultaneous Determination of Trace Rare Earth Elements and Other Elements in High Purity Terbium Oxide (Tb_4O_7) by ICP-AES After HPLC Separation Using P507 Resin

This article describes a new method for the simultaneous determination of trace rare earth elements (REEs) and non rare earth elements (NREEs) in high purity terbium oxide by ICP-AES after HPLC separation using P507 resin. The chromatographic separation of the analytes from the matrix using dilute nitric acid as mobile phase was studied. The experimental results showed that a favorable separation of trace metals (Cu and Gd) from the matrix (Tb) can easily be achieved by elution with dilute nitric acid within 25 min. The proposed method was applied to the determination of trace metals (Ca, Cu, Mg, Mn, Ni, Si, La, Ce, Pr, Nd, Sm, Eu and Gd) in high purity terbium oxide. The detection limits (DLs) for the analytes ranged from 0.4-4.0 μg\5g -1, and the recoveries are from 78%-105%.

Direct Determination of Trace Impurities in High Purity Zinc Oxide by High Resolution Inductively Coupled Plasma Mass Spectrometry

The determination of trace impurities in high purity zinc oxide by high resolution inductively coupled plasma mass spectrometry （ HR-ICP-MS ） was investigated. To overcome some poteutially problematic spectral iuterference, measurements were acquired in both middle and high resolution modes. The matrix effects due to the presence of excess HCl and zinc were evaluated. The optimum conditions for the determination were tested and discussed. The standard addition method was employed for quantitative analysis. The detection limits ranged from 0.02μg/ g to 6 μg/ g depending on the elements. The experimental resalts for the determination of Na, Mg, Ca, Cr, Mn, Fe, Co, Ni, Cu, Mo, Cd, Sb and Pb in several high purity zinc oxide powders were presented.

Purity and Uncertainty Study of CRM Betulin by DSC

Betulin(BE)can be obtained from many plants,such as those belonging Betulaceae family,and pharmacological investigations showed its notable biological properties and good potential for food and pharmaceutical development.We investigated the homogeneity,stability,purity,and uncertainty of a newly certified reference material(CRM)of BE.The certified purity value for the CRM of BE was 99.56%with an extended uncertainty of 0.07%(k=2,P=0.95),as determined by differential scanning calorimetry(DSC).In this study,DSC was used for the first time for purity determination of BE.Given its high accuracy,precision,and reproducibility,DSC can be used as an alternative technique for purity determination of CRMs in the pharmaceutical and food industry.

Determination of Trace Impurities of Rare Earth Elements in High Purity Yttrium Oxide by ICPMS

Determination of trace rare earth elements(REEs)in 99. 999% purity yttrium oxide using the inductively coupled plasma mass spectrometric technique (ICPMS) has been developed. Instrumental parameters and factors affecitng analytical results have been studied and then optimized.Samples are analyzed directly following an acid digestion without separation or preconcentration and with limit of detection of 0. 003～0. 02 ng/ml, precision of ±5. 4%(cofficient of variation)and recovery of 90～115%. Correction for isobaric interferences from oxide ions and hydroxide ions is made mathematically. Special internal standard procedures are used to compensate drift in metal:metal oxide ratios and sensitivity. The analytical results of several samples are accurate as compared with inductively coupled plasma atomic emission spectrometry (ICPAES) and spark source mass spectrometry (SSMS).

Existing Forms of Lanthanum in Purity Steels

Adding lanthanum to carbon-manganese purity steel, the existing forms of lanthanum were investigated. The results show that enrichment on grain boundary and solid solution in cementite are two kinds of important existing forms of lanthanum relating to micro-alloyed action. As a result of enrichment of lanthanum, the concentration of lanthanum aggregated on somewhere of grain boundary reaches as high as tens of times of its average content although the average content is very low. In addition, lanthanum atoms can replace partial Fe atoms that constitute cementite to form alloyed cementite, the solid solution amount of lanthanum in alloyed cementite increases as the increase of its average content in purity steel.

Relationship of Purity Gradient and Accumulation with Feed Composition in Two-Component Countercurrent Extraction System

Ａｃｃｕｍｕｌａｔｉｏｎ，ａｂａｓｉｃｐａｒａｍｅｔｅｒｉｎｓｏｌｖｅｎｔｅｘｔｒａｃｔｉｏｎｐｒｏｃｅｓ，ｗａｓｉｎｔｒｏｄｕｃｅｄｉｎｔｈｅｄｙｎａｍｉｃｓｉｍｕｌａｔｉｏｎ．Ｐｕｒｉｔｙｏｆｐｒｏｄｕｃｔｓ，ａｃｕｍｕｌａｔｉｏｎｏｆｅａｃ...

Giant efficiency and color purity enhancement in multicolor inorganic perovskite light-emitting diodes via heating-assisted vacuum deposition

Inorganic perovskites(Cs Pb X3(X=I,Br,Cl))have broad prospection in the field of high-definition displaying due to its excellent optoelectronic characteristics.The vacuum deposition process possesses advantages and competitiveness in the industrialized production.However,the performance of light emitting diodes(LEDs)based on vacuum-deposited is incredibly low.Herein,we proposed a heating-assisted vacuum deposition(HAVD)method to construct inorganic perovskite LEDs(Pe LEDs)with enhanced performance.The roughness and crystallinity of perovskite film were improved by regulating the heating treatment of substrates.And the perovskite film exhibited largely rise in luminescence,with decreasing defect density.Consequently,with the optimized temperature,the green Pe LEDs exhibited 100-fold improvement of external quantum efficiency(EQE)with the luminance of up to 11941 cd/m2,and the full width at half-maximum(FWHM)of the electroluminescence(EL)spectra was decreased from 25 to 17 nm.At the same time,the red and blue Pe LEDs also exhibited obvious enhancement in EQE and luminance by HAVD method,and both the FWHM of EL spectra dropped below 20 nm,exhibiting excellent high color purity.HAVD strategy has a huge potential to be a new commonly used method for low-cost fabrication of displays and lighting.

Production of High Purity Metals: A Review on Zone Refining Process

Purification is a primary application of zone melting, in which the improvement of efficiency, production yield and minimum achievable impurity level are always the research focus due to the increasing demand for high purity metals. This paper has systematically outlined the whole development of related research on zone refining of metals including basic theories, variants of zone refining, parametric optimization, numerical models, and high purity analytical methods. The collection of this information could be of good value to improve the refining efficiency and the production of high purity metals by zone refining.