期刊文献+
共找到3,784篇文章
< 1 2 190 >
每页显示 20 50 100
两种新的push-pull平衡的大数据量无线传感器网络数据分发算法 被引量:5
1
作者 陶孜谨 龚正虎 卢泽新 《计算机研究与发展》 EI CSCD 北大核心 2008年第7期1115-1125,共11页
无线传感器网络中如何获得较低的通信代价同时在事件数据的push和pull之间实现更好的平衡是各种数据分发算法共同追求的目标.分析了目前已公认较好的两种典型的有结构和无结构的数据分发算法,指出了它们的优缺点.在此基础上,结合这两种... 无线传感器网络中如何获得较低的通信代价同时在事件数据的push和pull之间实现更好的平衡是各种数据分发算法共同追求的目标.分析了目前已公认较好的两种典型的有结构和无结构的数据分发算法,指出了它们的优缺点.在此基础上,结合这两种算法使用的push-pull策略,针对不同应用环境下的无线传感器网络的ALL型查询的特定需求,提出了两种基于有结构和无结构存储模式相结合的混合型数据分发算法,分别是Hybrid-Dcs-Cn1(HDC1)算法和Hybrid-Dcs-Cn2(HDC2)算法.分析表明这两种算法在保证push-pull之间平衡的前提下解决了已有算法存在的热点问题:存储拷贝数多和查询性能低,能更好地适应传感器网络的特点,是两种能量高效的数据分发算法. 展开更多
关键词 数据分发 push-pull平衡 热点 通信代价 负载均衡 无线传感器网络
下载PDF
Push-Pull型pFLASH开关单元结构设计及特性
2
作者 刘国柱 洪根深 +5 位作者 于宗光 赵文彬 曹利超 吴素贞 李燕妃 李冰 《半导体技术》 CAS CSCD 北大核心 2018年第9期652-658,663,共8页
基于90 nm eFLASH工艺设计并制备了一种新型抗辐照Push-Pull型pFLASH开关单元,并对其特性进行了研究。该结构由2个2T-FLASH管(T1/T2)和1个信号传输PMOS管(T3)组成,采用带带隧穿(BTBT)编程方式和福勒-诺德海姆(FN)擦除方式实现... 基于90 nm eFLASH工艺设计并制备了一种新型抗辐照Push-Pull型pFLASH开关单元,并对其特性进行了研究。该结构由2个2T-FLASH管(T1/T2)和1个信号传输PMOS管(T3)组成,采用带带隧穿(BTBT)编程方式和福勒-诺德海姆(FN)擦除方式实现其"开/关"态功能。同时,对其"开/关"态特性进行表征,研究其耐久性和电荷保持特性,最后,对其抗总剂量(TID)能力进行评估。实验结果表明:该器件的"T1编程-T2擦除"与"T1擦除-T2编程"态均可以实现信号传输管的"开/关"态功能,其阈值窗口的均值约为10.5 V;在工作电压为-1.2 V条件下,T3管的"开"态驱动电流均值约为0.92 mA,"关"态漏电流低于40 pA,且均表现出了良好的一致性。同时,该器件的循环擦/写次数可达10 000次,在25℃的"开/关"态应力条件下寿命大于10年,抗总剂量能力可达150 krad(Si)以上。 展开更多
关键词 push-pull型pFLASH开关单元 “开/关”态 阈值窗口 电荷保持性 总剂量(TID)
下载PDF
基于第三方的Push-Pull逆向物流模式
3
作者 于建红 鲁耀斌 《管理学报》 2005年第z1期174-177,共4页
首先阐述了逆向物流的内涵、功能以及基于第三方逆向物流的提出,其次分析了外包逆向物流的优势,最后分析了生产控制系统中的Push-Pull方法.在此基础上,提出基于第三方的Push-Pull逆向物流模式.
关键词 逆向物流 第三方逆向物流 push-pull
下载PDF
基于DTN网络的PUSH-PULL策略研究
4
作者 崔永锋 《河南师范大学学报(自然科学版)》 CAS CSCD 北大核心 2010年第6期54-56,共3页
DTN网络是新一代的网络体系结构,PUSH-PULL是解决DTN网络中拥塞控制的一种有效策略,介绍了DTN网络中拥塞控制的研究现状,并对PUSH-PULL的各个策略进行了阐述,通过NS2搭建DTN网络环境并通过模拟对PUSH-PULL的7种策略进行仿真,模拟仿真结... DTN网络是新一代的网络体系结构,PUSH-PULL是解决DTN网络中拥塞控制的一种有效策略,介绍了DTN网络中拥塞控制的研究现状,并对PUSH-PULL的各个策略进行了阐述,通过NS2搭建DTN网络环境并通过模拟对PUSH-PULL的7种策略进行仿真,模拟仿真结果表明,采用PUSH-PULL策略的可以有效的提高信息的传输率. 展开更多
关键词 DTN push-pull NS2 仿真
下载PDF
高并发数据共享系统基于Push-Pull混合模式的性能优化
5
作者 王子光 王子明 《现代信息科技》 2018年第4期65-67,共3页
随着面向服务架构的大规模分布式系统的应用,多个系统之间由于数据集成的需要,彼此间要高并发传递大量数据,特别是状态数据的同步,对数据的实时性要求越来越高。数据单纯通过客户端以Pull(拉取)模式获取已经不能满足实时性要求,高频率... 随着面向服务架构的大规模分布式系统的应用,多个系统之间由于数据集成的需要,彼此间要高并发传递大量数据,特别是状态数据的同步,对数据的实时性要求越来越高。数据单纯通过客户端以Pull(拉取)模式获取已经不能满足实时性要求,高频率服务调用也会给服务端数据库带来较大的压力。单纯通过服务端以Push(推送)模式推送给客户端也不能满足客户端对个性化数据的需求,大量推送既会给服务端带来较大压力,又会造成客户端数据处理不及时。本文针对高并发数据共享系统应用过程中产生的性能问题,提出一种基于pub/sub消息处理的Push-Pull混合模式优化方案,实践表明该方案极大地提高了系统可用性及数据安全性,对同类系统的性能优化具有较好的借鉴作用。 展开更多
关键词 高并发 数据共享系统 性能优化 pub/sub消息处理 push-pull混合模式
下载PDF
Push-Pull型不对称钴(III)咔咯的合成与性质 被引量:1
6
作者 张振 温俊霞 +2 位作者 张生玉 朱卫华 梁旭 《合成化学》 CAS 北大核心 2020年第9期759-763,共5页
酸催化下,在水-甲醇体系中,合成并分离了3种含有Push-Pull取代基的新型低对称A2B型钴(III)咔咯,其结构经1H NMR,19F NMR和HR-MS(ESI-TOF)表征。并利用光谱学和电化学方法对3种钴咔咯的电子结构进行了深入研究。结果表明:引入Push-Pull... 酸催化下,在水-甲醇体系中,合成并分离了3种含有Push-Pull取代基的新型低对称A2B型钴(III)咔咯,其结构经1H NMR,19F NMR和HR-MS(ESI-TOF)表征。并利用光谱学和电化学方法对3种钴咔咯的电子结构进行了深入研究。结果表明:引入Push-Pull型不对称对钴(III)咔咯分子的电子结构有明显的调控作用,且随着引入基团的改变而产生显著的规律性差异,为进一步的分子设计、合成及其应用奠定基础。 展开更多
关键词 push-pull型咔咯 光谱性质 电化学性质 电子结构 合成
下载PDF
Exploiting push-pull strategy to combat the tea green leafhopper based on volatiles of Lavandula angustifolia and Flemingia macrophylla 被引量:10
7
作者 HAN Shan-jie WANG Meng-xin +3 位作者 WANG Yan-su WANG Yun-gang CUI Lin HAN Bao-yu 《Journal of Integrative Agriculture》 SCIE CAS CSCD 2020年第1期193-203,共11页
Thirteen volatile compounds were identified from Flemingia macrophylla plants. Eight major components significantly attracted the tea green leafhoppers, Empoasca flavescens F. Based on their relative abundances, follo... Thirteen volatile compounds were identified from Flemingia macrophylla plants. Eight major components significantly attracted the tea green leafhoppers, Empoasca flavescens F. Based on their relative abundances, following synthetic blends were made for field experiments: 1) eight-component-attractant blend included Z-3-hexen-1-ol, Z-3-hexenyl acetate, Z-ocimene, Me SA, Z-3-hexenyl butyrate, dodecane, hexadecane and nonanal at 10, 10, 1, 11, 2, 6, 2 and 4 mg mL^-1 in n-hexane, respectively;2) four-component-attractant blend #1 contained hexadecane, Z-3-hexenyl acetate, Z-3-hexen-1-ol and nonanal at 2, 10, 10 and 4 mg mL^-1 in n-hexane, respectively;3) four-component-attractant blend #2 contained hexadecane, Z-3-hexenyl acetate, Z-3-hexen-1-ol and Me SA at 2, 10, 10 and 11 mg mL^-1 in n-hexane, respectively. Thymol and 1-methoxy-4-methyl-2-(1-methylethyl)-benzene, identified from Lavandula angustifolia aeration samples, significantly repelled the leafhopper as strong repellents when tested alone or in combination at 10 mg mL^-1. For field bioassays, each attractant lure was attached to a bud green sticky board hung from a bamboo stick at above tea plant level for catching the leafhoppers, whereas the repellent dispenser was tied to a tea branch inside tea clump for pushing the leafhoppers away from tea clumps. The results showed that the eight-component-attractant blend caught similar numbers of the leafhopper as did the four-component-attractant blend #1 at about 53–79 leafhoppers/trap/day, which were significantly higher than those on the hexane-control bud green sticky boards. Average leafhopper catches from un-baited sticky boards were about 51–73 leafhoppers/trap/day when pushed by the repellents placed inside tea plants, with the two-component-repellent blend being more effective than their single components. When the two-component-repellent blend was further tested with the three attractant blends in a push-pull fashion, average trap catches ranged from 62 to 92 leafhoppers/trap/day. Control efficacy on the leafhoppers within the push-pull zones increased progressively from day 1(43%) to day 5(73%). This push-pull approach might have a great potential as a green control strategy for combating the tea green leafhoppers. 展开更多
关键词 push-pull strategy ATTRACTANTS REPELLENTS Flemingia macrophylla tea green leafhopper tea plantation
下载PDF
Influential Factors in Employment Location Selection Based on “Push-Pull” Migration Theory—A Case Study in Three Gorges Reservoir Area in China 被引量:10
8
作者 XU Ding-de ZHANG Ji-fei +3 位作者 XIE Fang-ting LIU Shao-quan CAO Meng-tian LIU En-lai 《Journal of Mountain Science》 SCIE CSCD 2015年第6期1562-1581,共20页
In China, farmers employed in non-farm work have become important socio-economic actors, but few studies have examined the farmers' perspective in making their work location choices. Based on "push-pull"... In China, farmers employed in non-farm work have become important socio-economic actors, but few studies have examined the farmers' perspective in making their work location choices. Based on "push-pull" migration theory, this paper utilizes sectional data from a 2013 survey of farmers in China's Three Gorges Reservoir area to empirically analyze the factors influencing migrant workers' choice of employment location. The results indicate that 60.46% of laborers have migrated from their home province, whereas 39.54% have remained in their home province. Focusing on personal, household, and community characteristics—in addition to the economic characteristics of the sample counties—multinomial logistic regression models reveal that farmer-laborers' employment location decisions are influenced by their personal capital endowment(age, years of education and social networks), family structure(the number of laborers, elders, children and students), home village characteristics(location, economic development level and the degree of relief of the land) and home county economic development level. Notably, male and female laborers' location decisions reveal a converging trend, and their differences are not pronounced. Per capita arable land area has little influence on location decisions, whereas the educational level of laborers has a significant impact. The results differ significantly from those found in previous studies. 展开更多
关键词 Off-farm employment Location selection Migrants push-pull migration theory Three Gorges Reservoir region China
下载PDF
Push-Pull Finite-Time Convergence Distributed Optimization Algorithm 被引量:1
9
作者 Xiaobiao Chen Kaixin Yan +3 位作者 Yu Gao Xuefeng Xu Kang Yan Jing Wang 《American Journal of Computational Mathematics》 2020年第1期118-146,共29页
With the widespread application of distributed systems, many problems need to be solved urgently. How to design distributed optimization strategies has become a research hotspot. This article focuses on the solution r... With the widespread application of distributed systems, many problems need to be solved urgently. How to design distributed optimization strategies has become a research hotspot. This article focuses on the solution rate of the distributed convex optimization algorithm. Each agent in the network has its own convex cost function. We consider a gradient-based distributed method and use a push-pull gradient algorithm to minimize the total cost function. Inspired by the current multi-agent consensus cooperation protocol for distributed convex optimization algorithm, a distributed convex optimization algorithm with finite time convergence is proposed and studied. In the end, based on a fixed undirected distributed network topology, a fast convergent distributed cooperative learning method based on a linear parameterized neural network is proposed, which is different from the existing distributed convex optimization algorithms that can achieve exponential convergence. The algorithm can achieve finite-time convergence. The convergence of the algorithm can be guaranteed by the Lyapunov method. The corresponding simulation examples also show the effectiveness of the algorithm intuitively. Compared with other algorithms, this algorithm is competitive. 展开更多
关键词 DISTRIBUTED Optimization FINITE Time CONVERGENCE Linear Parameterized NEURAL Network push-pull Algorithm Undirected Graph
下载PDF
Comparison of the severity of injury of hippocampal neuron in rats induced by simulated push-pull maneuver at various degrees
10
作者 Suhong Guo Hui Zhang 《Neural Regeneration Research》 SCIE CAS CSCD 2006年第1期10-13,共4页
BACKGROUND: Push-pull effect is often caused during maneuver, and the changes of unconsciousness induced can affect or damage cerebral neurons at various degrees. OBJECTIVE: To observe the effect of simulated push-p... BACKGROUND: Push-pull effect is often caused during maneuver, and the changes of unconsciousness induced can affect or damage cerebral neurons at various degrees. OBJECTIVE: To observe the effect of simulated push-pull maneuver at various degrees on injury of hippocampal neurons in rats and analyze its phase effect. DESIGN: Randomized control study.SETTING : Physiological Department of Jilin Medical College.MATERIALS: A total of 40 healthy male Wistar rats, of clean grade, weighting 205-300 g, aged 3-4 months, were randomly divided into control group (n=4) and three push-pull experimental groups, including +2 Gz group (intensity: -2 Gz to +2 Gz, n=12), +6 Gz group (-6 Gz to +6 Gz, n=12) and +8 Gz group (-8 Gz to +8 Gz, n=12).METHODS: The experiment was completed in the Physiological Department of Jilin Military Medical College from March 2002 to May 2003. ① Rats in the experimental groups were put at the specially rolling arm of animal centrifugal machine. Then, they were pushed and pulled with ±2 Gz, ±6 Gz and ±8 Gz, respectively. The jolt was 1 Gz/s. However, rats in control group were not treated with any ways. ② Stroke index and neurological evaluation were performed on rats in the experimental groups at 0.5, 6 and 24 hours after push-pull. Stroke index was 25 points in total. The higher the scores were, the severer the cerebral injury was. Neurological evaluation was 10 points in total. The higher the scores were, the severer the nerve injury was. ③ Hippocampal tissue in brain of rats were selected to cut into sections at each time points, and form and distribution of neurons were observed in hippocampal areas with HE staining. Degrees of neuronal injury in hippocampal CA1 area were assayed after push-pull at various degrees with electron microscope. ④ Measurement data were compared with t test.MAIN OUTCOME MEASURES:① Stroke index and neurological evaluation; ② form and distribution of neurons in hippocampal areas;③ degrees of neuronal injury in hippocampal CA1 area.RESULTS: A total of 40 rats were involved in the final analysis. ① Stroke index and neurological evaluation of rats in experimental groups: At 30 minutes and 6 hours after push-pull exposure, stroke index and neurological evaluation were higher in ±6Gz group and ±8 Gz group than those in control group (P 〈 0.01), especially at 6 hours after push-pull exposure, those in ±8 Gz group were the highest at each time points [(11.00±2.16), (5.75±1.70) points]. At 24 hours after exposure, those were decreased as compared with those within the former two time points, but the values were still higher than those in control group (P 〈 0.05-0.01). ② Results of HE staining: At 6 and 24 hours after exposure, partially neuronal degeneration was observed in pyramidal layer in ±6 Gz group and ±8 Gz group, including crenation of neurons, tdangle or polygon, and karyopycnosis, especially the injury in ±8 Gz group was the most obvious at 6 hours after exposure. ③ Results of ultrastructure with electron microscope: Partially neuronal degeneration at various degrees was observed in hippocampal CA1 area in ±2 Gz group at 6 hours after exposure and in ±6 Gz group and ±8 Gz group at 6 and 24 hours after exposure. At 6 hours after exposure, nucleus of hippocampal neurons in ±8 Gz group was irregular and umbilication. Caryotin was aggregated, nuclear matrix was swelled and disorder, and vacuolation was also observed. Rough endoplasmic reticulum was expanded, mitochondrium was swelled, and crista was disappeared.CONCLUSION: ① Push-pull cannot damage hippocampal neurons of rats in ±2 Gz group. ② Exposure can cause injury of hippocampal neurons of rats in ±6Gz group and ±8 Gz group, especially the injury is the severest at 6 hours after exposure in ±8 Gz group and relieves gradually 24 hours later. 展开更多
关键词 Comparison of the severity of injury of hippocampal neuron in rats induced by simulated push-pull maneuver at various degrees
下载PDF
A Case Study of China as an Exporter of Higher Education Using Push-Pull Theory
11
作者 Zhang Li 《Review of Global Academics》 2014年第4期277-292,共16页
Developing countries establishing international branch campuses (IBCs) is an emerging trend, and currently compromises 17% percent of the market in terms of the number of IBCs. While researchers have applied differe... Developing countries establishing international branch campuses (IBCs) is an emerging trend, and currently compromises 17% percent of the market in terms of the number of IBCs. While researchers have applied different social science perspectives to analyze cross-border higher education and IBCs, they usually emphasize developed countries as exporters and developing countries as importers of higher education. The phenomenon of developing countries as exporters of higher education has seldom been looked at so far in the research. This paper first describes the current development of IBCs, then illustrates what social science perspectives have been used on this topic, followed by how push-pull theory relates to developing countries being exporters of IBCs. The paper aims to combine E.S. Lee's push-pull theory and Gu's push-pull framework to analyze the push and pull factors in their advertisement and marketing claims when higher education institutions (HEIs) from developing countries plan to establish branch campuses in foreign countries. Soochow University in Laos is used as a case study. Furthermore, intermediate barriers and solutions are also identified in this case study. However, this case study has its own uniqueness and only serves heuristic for future research. 展开更多
关键词 push-pull theory international branch campuses cross-border higher education importers and exporters of higher education
下载PDF
Basic Study on Perfect Push-Pull Local Ventilation
12
作者 Yukihiro Hattori Koichi Nakabayashi +1 位作者 Osami Kitoh Motoyuki Ito 《Journal of Energy and Power Engineering》 2012年第12期1940-1944,共5页
In this study, the authors experimentally investigated the changes of the mean velocity component profiles, half-widths (b12), turbulence intensities, Reynolds shear stress and intermittency of turbulence of a trans... In this study, the authors experimentally investigated the changes of the mean velocity component profiles, half-widths (b12), turbulence intensities, Reynolds shear stress and intermittency of turbulence of a transient plane turbulent jet developing from a jet exit into a hood opening. The values of maximum mean-velocity and half-widths of the axial velocity profile along the center-line of the jet are greater than those for a fully developed two-dimensional jet. Turbulence intensity in the axial direction is not affected by the flow rate ratio. At the same time, turbulence intensity in the lateral direction becomes greater as the hood is approached and the flow rate ratio Q3/Q1 becomes larger (QI is jet flow rate from nozzle and Q3 is suction flow rate produced by the hood). These experimental results are in accord with the distributions of production terms in the axial and lateral directions. Reynolds shear stress becomes smaller as the flow rate ratio becomes larger near the hood. Dimensionless distance y1/br2, from the center axis of the flow to the point where intermittency factor y becomes a constant value, narrows as the flow rate ratio becomes larger near the hood. 展开更多
关键词 Turbulence intensity intermittency factor Reynolds shear stress push-pull ventilation.
下载PDF
小区播种机锥体投种器分种均匀性的试验研究 被引量:2
13
作者 叶岩 吴泽全 +2 位作者 余涛 东忠阁 刘俊杰 《农机化研究》 北大核心 2024年第2期179-183,共5页
为了提高小区播种机锥体分种器分种均匀性和自动化水平,解决传统小区播种机作业时分种不均匀、人工投种作业强度大、投种器水平度难以持续稳定调节等问题,设计了一种基于现有手动调节水平的自动调平投种装置。首先,为确保投种器分种均... 为了提高小区播种机锥体分种器分种均匀性和自动化水平,解决传统小区播种机作业时分种不均匀、人工投种作业强度大、投种器水平度难以持续稳定调节等问题,设计了一种基于现有手动调节水平的自动调平投种装置。首先,为确保投种器分种均匀性与作业的稳定性,对投种器的结构进行设计;然后,对种子的落种过程进行理论分析,确定了关键部件结构;最后,利用SPSS25.0软件设计三因素三水平试验,分析了影响投种器分种均匀性的主要因素,结果表明:各因素对投种器分种均匀性影响程度的主次顺序为锥体角度、导种管直径、漏斗口直径。最优参数条件下分种时,投种器分种均匀性较好,能够满足小区播种机投种器分种作业的需求。研究结果可为小区播种机分种均匀性问题的深入研究提供参考。 展开更多
关键词 小区播种机 投种器 均匀性
下载PDF
基于FTU的配电网单相接地故障定位与恢复方法 被引量:3
14
作者 彭军林 石勇 +2 位作者 于哲 曾先锋 笃峻 《电器与能效管理技术》 2024年第2期72-78,共7页
配电网发生最多的故障是接地故障。针对准确地检测隔离接地故障线路并尽快恢复供电,提出基于配电开关监控终端(FTU)的配电网单相接地故障定位与恢复方法。利用配电网各节点FTU的小波包变换暂态选线及相电流暂态特征选线技术,结合故障路... 配电网发生最多的故障是接地故障。针对准确地检测隔离接地故障线路并尽快恢复供电,提出基于配电开关监控终端(FTU)的配电网单相接地故障定位与恢复方法。利用配电网各节点FTU的小波包变换暂态选线及相电流暂态特征选线技术,结合故障路径自适应处理控制策略,配合首开关延时合闸逻辑,从而实现多分支配电网故障定位与自动隔离恢复。所提方法能够快速选出故障线路并隔离故障区段,有利于故障快速消除,提高系统运行的安全性、可靠性。 展开更多
关键词 单相接地故障 小波包 故障定位 自动隔离恢复 配电开关监控终端
下载PDF
小区播种机供种装置的技术研究现状及展望
15
作者 叶岩 吴泽全 +5 位作者 蔡晓华 刘俊杰 杨存志 李源源 赵丽平 李尧 《农机化研究》 北大核心 2025年第2期262-268,共7页
供种装置是小区播种机的关键装置之一。为此,简述了国内外小区播种机配套的主要供种装置与技术研究现状。从供种装置的主要结构形式和供种方式出发,阐述了现有单漏斗式、中央锥斗式、弹匣式和新型弹匣式供种装置的工作原理、结构组成和... 供种装置是小区播种机的关键装置之一。为此,简述了国内外小区播种机配套的主要供种装置与技术研究现状。从供种装置的主要结构形式和供种方式出发,阐述了现有单漏斗式、中央锥斗式、弹匣式和新型弹匣式供种装置的工作原理、结构组成和前沿技术研究进展。同时,分析了当前国内外供种装置的研发现状,列举国内外具有代表性的小区播种机供种装置的研究成果,并结合国内供种装置发展现状展望了国内小区播种机配套供种装置的未来发展方向,为企业及研究人员了解国内小区播种机供种装置的技术研究现状提供一定的参考。 展开更多
关键词 小区播种机 供种装置 研究现状
下载PDF
基于贝叶斯优化LightGBM算法的主动式搜索时间调整方法 被引量:1
16
作者 刘青 鲁成 +1 位作者 马天祥 段昕 《华北电力大学学报(自然科学版)》 CAS 北大核心 2024年第1期30-38,48,共10页
针对5G配电终端延迟波动较大导致保护闭锁的问题,提出一种基于贝叶斯优化LightGBM算法的主动式搜索时间调整方法。该方法以无线通信终端延迟波动历史数据以及温度、日期时间等特征变量为输入,对延迟进行预测并动态调整设备参数。首先,... 针对5G配电终端延迟波动较大导致保护闭锁的问题,提出一种基于贝叶斯优化LightGBM算法的主动式搜索时间调整方法。该方法以无线通信终端延迟波动历史数据以及温度、日期时间等特征变量为输入,对延迟进行预测并动态调整设备参数。首先,对原始特征变量进行特征工程预处理,然后同历史延迟数据一并通过LightGBM算法进行数据的拟合,在训练过程中引入贝叶斯优化算法进行参数寻优,并利用最终加权组合,结合终端实时监测延迟进行预测值的调整,最终实现5G终端延迟的高精度预测。以河北南网某5G配网试点的数据进行训练与验证,结果表明所提方法能有效实现延迟预测,较随机森林回归,XGBoost等算法有更高的预测精度。 展开更多
关键词 贝叶斯优化 机器学习 5G通信 馈线自动化 延迟波动 短期预测
下载PDF
集中式馈线自动化配电网供电可靠性评估 被引量:1
17
作者 陈根永 高翔宇 +1 位作者 谭超 范旭光 《郑州大学学报(工学版)》 北大核心 2024年第1期114-121,共8页
计及集中式馈线自动化的配电网可靠性评估尚存在较多研究空白,且多数研究仅计及故障停电的影响,在考虑预安排检修容量约束的情况下,计及负荷转供影响,结合馈线自动化的类型及运行逻辑,依据馈线自动化相关技术指标,对恢复供电过程中出现... 计及集中式馈线自动化的配电网可靠性评估尚存在较多研究空白,且多数研究仅计及故障停电的影响,在考虑预安排检修容量约束的情况下,计及负荷转供影响,结合馈线自动化的类型及运行逻辑,依据馈线自动化相关技术指标,对恢复供电过程中出现的负荷点进行详细分类,推导出不同类型负荷期望恢复供电时间和配电网供电可靠性指标计算公式。结合算例进行分析可知,不同终端配置下馈线系统平均停电持续时间SAIDI可减少0.95~1.08 h/(用户·a),说明了优化终端配置可有效提高配电网供电可靠性,证明了所提评估方法的准确性和实用性,并比较了不同终端配置对可靠性的影响。 展开更多
关键词 集中式馈线自动化 配电网 供电可靠性 预安排检修 负荷转供
下载PDF
基于智能化全自动机械手数控上料机的设计与制造
18
作者 罗永洪 占林林 +2 位作者 周林玉 吴浪武 王磊明 《内燃机与配件》 2024年第15期55-57,共3页
上料机是数控机床的重要辅助设备,全自动机械手是一种可编程的智能型自动化设备,是应用计算机技术进行控制替代人工进行工作的高度自动化系统。本文通过对智能化全自动机械手数控上料机的设计需求、整体设计、关键技术问题以及制造与实... 上料机是数控机床的重要辅助设备,全自动机械手是一种可编程的智能型自动化设备,是应用计算机技术进行控制替代人工进行工作的高度自动化系统。本文通过对智能化全自动机械手数控上料机的设计需求、整体设计、关键技术问题以及制造与实验验证进行深入研究,提出了一种全新的设计方案,并在研究的过程中融入思政元素,通过学习可以弘扬工匠精神,培养创新意识和团队协作精神,为下一步技术进步感到自豪。该设计方案通过实验验证表现出良好的性能,并为该领域的研究和应用提供了相关的参考和借鉴,对推动此项技术的发展,提高生产效率,降低生产成本具有重要意义。 展开更多
关键词 机械手 上料机 智能化 设计 思政元素
下载PDF
面向季节性短时高峰负荷的虚拟配电馈线功能架构及协同配置
19
作者 周念成 王鹏 +3 位作者 池源 郭莹霏 王强钢 罗永捷 《电力系统自动化》 EI CSCD 北大核心 2024年第14期79-90,共12页
传统线路增容方式面对季节性短时高峰负荷时存在线路整体利用率低、紧急功率支撑能力差等问题。因此,文中以功能虚拟化为核心,研究了传统配电馈线与储能元件融合的虚拟配电馈线功能架构,利用双端储能元件搭建虚拟电能传输通道,以应对季... 传统线路增容方式面对季节性短时高峰负荷时存在线路整体利用率低、紧急功率支撑能力差等问题。因此,文中以功能虚拟化为核心,研究了传统配电馈线与储能元件融合的虚拟配电馈线功能架构,利用双端储能元件搭建虚拟电能传输通道,以应对季节性短时高峰负荷、延缓传统线路增容改造工程,并在非高峰时期提供紧急功率支撑和辅助服务功能,提高储能元件整体利用率。为充分挖掘虚拟配电馈线的灵活传输和紧急功率支撑潜力,提出了配电网线路增容优化配置模型,在保证经济性和满足高峰负荷需求的前提下,优化虚拟配电馈线储能配置。算例研究表明,虚拟配电馈线能够有效延缓传统线路增容改造工程、应对季节性短时高峰负荷;对于线路负荷增长较稳定、线路长度较长和设计延缓增容年限较短的配电区域,虚拟配电馈线的优势更加凸显。 展开更多
关键词 储能 虚拟配电馈线 季节性短时高峰负荷 线路增容 优化配置
下载PDF
考虑负荷停电差异化的配电自动化终端混合优化配置方法
20
作者 唐金锐 鲍柯方 +3 位作者 曹芸玉 詹申俊 侯慧 袁成清 《电力系统自动化》 EI CSCD 北大核心 2024年第14期157-166,共10页
成本低且安装灵活的故障指示器(FI)常与具备远程遥控能力的馈线远程终端单元(FRTU)协同完成配电网的故障定位和隔离,以缩减负荷停电时间。在配电网各开关位置或分支线路上,有选择性地部署配电自动化终端的FRTU和FI,可减少故障停电损失... 成本低且安装灵活的故障指示器(FI)常与具备远程遥控能力的馈线远程终端单元(FRTU)协同完成配电网的故障定位和隔离,以缩减负荷停电时间。在配电网各开关位置或分支线路上,有选择性地部署配电自动化终端的FRTU和FI,可减少故障停电损失费用。为此,提出了考虑各供电负荷停电差异化的FRTU和FI的混合优化配置新方法。首先,根据待分析负荷、故障点、上级110 kV/35 kV变电站以及联络开关的相对位置,考虑FRTU和FI协同作用下的故障定位、故障隔离和供电恢复全过程,建立基于FRTU和FI混合配置方案的各供电负荷差异化停电时间关系式。然后,构建了以FRTU和FI的全生命周期成本费用和故障停电损失费用之和最小为目标的混合优化配置数学模型,并完成优化求解。最后,在CSG 53节点测试系统上验证了所提方法的有效性。 展开更多
关键词 配电网 馈线远程终端单元 故障指示器 混合优化配置 故障定位 故障隔离
下载PDF
上一页 1 2 190 下一页 到第
使用帮助 返回顶部