The effects of TMCP parameters, consisting of finish cooling temperature and start rolling temperature in non-recrystallization region, on the final microstructure and mechanical properties of Q460 qNH steel were stud...The effects of TMCP parameters, consisting of finish cooling temperature and start rolling temperature in non-recrystallization region, on the final microstructure and mechanical properties of Q460 qNH steel were studied by tensile, Charpy impact tests and optical microscopy. The TMCP parameters for Q460 qNH steel were optimized by laboratory experiments. The results show that the yield strength and tensile strength increase with the finish cooling temperature, and the microstructure of Q460 qNH steel consists of ferrite and granular bainite.展开更多
The corrosion behavior of Q370qNH steel in the presence and absence of hot-rolled oxide scale in simulated industrial atmospheric environment was studied by dry/wet cycle accelerated corrosion experiments.The experime...The corrosion behavior of Q370qNH steel in the presence and absence of hot-rolled oxide scale in simulated industrial atmospheric environment was studied by dry/wet cycle accelerated corrosion experiments.The experimental results show that the corrosion type of bare steel is uneven overall corrosion and large size pitting corrosion in small areas;that of oxide scale sample is local dissolution corrosion and small size pitting corrosion in large areas,and corrosion rate is much smaller than that of bare steel.The corrosion products of both steels are composed ofα-FeOOH,γ-FeOOH,Fe_(2)O_(3),and Fe_(3)O_(4),but the formation mechanism is different.The bare steel generatesα-FeOOH andγ-FeOOH through“acid regeneration cycle mechanism”;the oxide scale sample generates hydroxides mainly through the gradual dissolution of the oxide film,and then through“the acid regeneration cycle mechanism”.With the extension of corrosion time,the electrochemical stability of the sample with oxide scale increases,but the change of tafel curve of bare steel sample is not obvious.In simulated industrial atmosphere,the existence of hot-rolled oxide scale can facilitate the formation of dense rust layer on the surface of Q370qNH steel,which is more protective than bare steel.展开更多
基金Funded by the Hi-Tech Research and Development Program of China(2003AA33G010)
文摘The effects of TMCP parameters, consisting of finish cooling temperature and start rolling temperature in non-recrystallization region, on the final microstructure and mechanical properties of Q460 qNH steel were studied by tensile, Charpy impact tests and optical microscopy. The TMCP parameters for Q460 qNH steel were optimized by laboratory experiments. The results show that the yield strength and tensile strength increase with the finish cooling temperature, and the microstructure of Q460 qNH steel consists of ferrite and granular bainite.
基金by the National Natural Science Fundation of China(No.52161007)the Science and Technology Project of Gansu Provincial Department of Transportation(No.202102)the Natural Science Foundation of Gansu Province(No.20JR10RA170)。
文摘The corrosion behavior of Q370qNH steel in the presence and absence of hot-rolled oxide scale in simulated industrial atmospheric environment was studied by dry/wet cycle accelerated corrosion experiments.The experimental results show that the corrosion type of bare steel is uneven overall corrosion and large size pitting corrosion in small areas;that of oxide scale sample is local dissolution corrosion and small size pitting corrosion in large areas,and corrosion rate is much smaller than that of bare steel.The corrosion products of both steels are composed ofα-FeOOH,γ-FeOOH,Fe_(2)O_(3),and Fe_(3)O_(4),but the formation mechanism is different.The bare steel generatesα-FeOOH andγ-FeOOH through“acid regeneration cycle mechanism”;the oxide scale sample generates hydroxides mainly through the gradual dissolution of the oxide film,and then through“the acid regeneration cycle mechanism”.With the extension of corrosion time,the electrochemical stability of the sample with oxide scale increases,but the change of tafel curve of bare steel sample is not obvious.In simulated industrial atmosphere,the existence of hot-rolled oxide scale can facilitate the formation of dense rust layer on the surface of Q370qNH steel,which is more protective than bare steel.
