In situ digital testing method for quality assessment of soft soil improvement with polyurethane

This study purposes an in situ testing method on quality assessment of soil improvement.Factual drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring method.These factual drilling data can characterize the degree of soil improvement by penetration injection with permeable polyurethane.Result from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement vs.net drilling time,which indicates the spatial distributions of soil profile.The soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky soil.The results of soil profile are verified by the parallel site loggings.The constant drilling speeds profile the coring-resistant strength of drilled soils.By comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty clay.Laboratory tests,i.e.uniaxial compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling speeds.Results show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty clay.The UCS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ method.This method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

Construction and Application of a Quality Evaluation System for Group Elderly Care Services Based on the Internet of Things

With the continuous intensification of global aging,the issue of elderly care has become an increasingly prominent social problem.The Internet of Things(IoT)technology,as an emerging field,holds broad application prospects.This article focuses on the application of IoT technology in group elderly care services and constructs a quality evaluation system for these services based on IoT technology.Through the analysis of practical application cases,the advantages and challenges of IoT technology in group elderly care services have been examined,confirming the feasibility and effectiveness of the evaluation system.

Bridge the Gap Between Full-Reference and No-Reference:A Totally Full-Reference Induced Blind Image Quality Assessment via Deep Neural Networks

Blind image quality assessment(BIQA)is of fundamental importance in low-level computer vision community.Increasing interest has been drawn in exploiting deep neural networks for BIQA.Despite of the notable success achieved,there is a broad consensus that training deep convolutional neural networks(DCNN)heavily relies on massive annotated data.Unfortunately,BIQA is typically a small sample problem,resulting the generalization ability of BIQA severely restricted.In order to improve the accuracy and generalization ability of BIQA metrics,this work proposed a totally opinion-unaware BIQA in which no subjective annotations are involved in the training stage.Multiple full-reference image quality assessment(FR-IQA)metrics are employed to label the distorted image as a substitution of subjective quality annotation.A deep neural network(DNN)is trained to blindly predict the multiple FR-IQA score in absence of corresponding pristine image.In the end,a selfsupervised FR-IQA score aggregator implemented by adversarial auto-encoder pools the predictions of multiple FR-IQA scores into the final quality predicting score.Even though none of subjective scores are involved in the training stage,experimental results indicate that our proposed full reference induced BIQA framework is as competitive as state-of-the-art BIQA metrics.

Blind Image Quality Assessment by Pairwise Ranking Image Series

Image quality assessment(IQA)is constantly innovating,but there are still three types of stickers that have not been resolved:the“content sticker”-limitation of training set,the“annotation sticker”-subjective instability in opinion scores and the“distortion sticker”-disordered distortion settings.In this paper,a No-Reference Image Quality Assessment(NR IQA)approach is proposed to deal with the problems.For“content sticker”,we introduce the idea of pairwise comparison and generate a largescale ranking set to pre-train the network;For“annotation sticker”,the absolute noise-containing subjective scores are transformed into ranking comparison results,and we design an indirect unsupervised regression based on EigenValue Decomposition(EVD);For“distortion sticker”,we propose a perception-based distortion classification method,which makes the distortion types clear and refined.Experiments have proved that our NR IQA approach Experiments show that the algorithm performs well and has good generalization ability.Furthermore,the proposed perception based distortion classification method would be able to provide insights on how the visual related studies may be developed and to broaden our understanding of human visual system.

Retrospective Analysis of External Quality Assessment Data of Humoral (Except Feces) Morphology in Guangxi from 2010 to 2022

[Objectives] The study aims to improve the ability of inspectors to recognize humoral morphology and provide data reference for the improvement of EQA work of humoral morphology by Guangxi Clinical Laboratory Center. [Methods] A retrospective analysis was made on the EQA of humoral morphology by Guangxi Clinical Laboratory Center from 2010 to 2022, and the number of participating laboratories, the rate of return, sample types and maps of EQA of humoral morphology such as urine sediment, vaginal secretions and so on(except feces), and the reasons for the high error rate of the results of the participating laboratories were analyzed. [Results] The number of laboratories participating in the assessment of humoral morphology increased from 98 in 2010 to 371 in 2022. Except for 2011(90.98%), the rate of return was more than 94%, and the highest rate of return was up to 100%. A total of 119 pictures of EQA of humoral morphology were studied, including 101 urine sediment smears, 13 vaginal secretions smears and 5 other smears. The types of specimens were relatively comprehensive. The distribution of the maps was basically reasonable. The urinary sediment was mainly composed of crystalline salts, followed by tubes, and cells and fungi ranked third. The coverage was relatively complete. The error rate of return results from high to low were bacteria(error rate was equal to 40%), tubes and crystalline salts(error rate was close to 29%), and cells and fungi(error rate was about 14%). The main cases with high error rate of return results are as follows: the difference between different tubes was not clear, and the diversity of crystal morphology was not understood enough;the phase division of cells in the same system was wrong. [Conclusions] The analysis and summary of the reasons for the high error rate of the data and results of Guangxi's EQA of humoral morphology is helpful for laboratory physicians to improve their awareness of morphological examination and identify clearly the error type and blurred concept, and lays a foundation for Guangxi Clinical Laboratory Center to carry out EQA of humoral morphology more specifically.

Beyond Video Quality:Evaluation of Spatial Presence in 360-Degree Videos

With the rapid development of immersive multimedia technologies,360-degree video services have quickly gained popularity and how to ensure sufficient spatial presence of end users when viewing 360-degree videos becomes a new challenge.In this regard,accurately acquiring users’sense of spatial presence is of fundamental importance for video service providers to improve their service quality.Unfortunately,there is no efficient evaluation model so far for measuring the sense of spatial presence for 360-degree videos.In this paper,we first design an assessment framework to clarify the influencing factors of spatial presence.Related parameters of 360-degree videos and headmounted display devices are both considered in this framework.Well-designed subjective experiments are then conducted to investigate the impact of various influencing factors on the sense of presence.Based on the subjective ratings,we propose a spatial presence assessment model that can be easily deployed in 360-degree video applications.To the best of our knowledge,this is the first attempt in literature to establish a quantitative spatial presence assessment model by using technical parameters that are easily extracted.Experimental results demonstrate that the proposed model can reliably predict the sense of spatial presence.

Perceptual Quality Assessment for Point Clouds:A Survey

A point cloud is considered a promising 3D representation that has achieved wide applications in several fields.However,quality degradation inevitably occurs during its acquisition and generation,communication and transmission,and rendering and display.Therefore,how to accurately perceive the visual quality of point clouds is a meaningful topic.In this survey,we first introduce the point cloud to emphasize the importance of point cloud quality assessment(PCQA).A review of subjective PCQA is followed,including common point cloud distortions,subjective experimental setups and subjective databases.Then we review and compare objective PCQA methods in terms of modelbased and projection-based.Finally,we provide evaluation criteria for objective PCQA methods and compare the performances of various methods across multiple databases.This survey provides an overview of classical methods and recent advances in PCQA.

Target acquisition performance in the presence of JPEG image compression

This paper presents an investigation on the effect of JPEG compression on the similarity between the target image and the background,where the similarity is further used to determine the degree of clutter in the image.Four new clutter metrics based on image quality assessment are introduced,among which the Haar wavelet-based perceptual similarity index,known as HaarPSI,provides the best target acquisition prediction results.It is shown that the similarity between the target and the background at the boundary between visually lossless and visually lossy compression does not change significantly compared to the case when an uncompressed image is used.In future work,through subjective tests,it is necessary to check whether this presence of compression at the threshold of just noticeable differences will affect the human target acquisition performance.Similarity values are compared with the results of subjective tests of the well-known target Search_2 database,where the degree of agreement between objective and subjective scores,measured through linear correlation,reached a value of 90%.

Classification of knowledge graph completeness measurement techniques

At present,although knowledge graphs have been widely used in various fields such as recommendation systems,question and answer systems,and intelligent search,there are always quality problems such as knowledge omissions and errors.Quality assessment and control,as an important means to ensure the quality of knowledge,can make the applications based on knowledge graphs more complete and more accurate by reasonably assessing the knowledge graphs and fixing and improving the quality problems at the same time.Therefore,as an indispensable part of the knowledge graph construction process,the results of quality assessment and control determine the usefulness of the knowledge graph.Among them,the assessment and enhancement of completeness,as an important part of the assessment and control phase,determine whether the knowledge graph can fully reflect objective phenomena and reveal potential connections among entities.In this paper,we review specific techniques of completeness assessment and classify completeness assessment techniques in terms of closed world assumptions,open world assumptions,and partial completeness assumptions.The purpose of this paper is to further promote the development of knowledge graph quality control and to lay the foundation for subsequent research on the completeness assessment of knowledge graphs by reviewing and classifying completeness assessment techniques.

Assessment of groundwater suitability for different activities in Toshka district,south Egypt

Globally,groundwater has globally emerged as a crucial freshwater source for domestic,irrigation,and industrial needs.The evaluation of groundwater quality in the Toshka region is imperative to ensure its suitability for the extensive agricultural and industrial activities underway in this promising,groundwater-dependent development area.This is particularly significant as Egypt increasingly relies on groundwater reserves to address freshwater deficits and to implement mega-development projects in barren lands.In this study,fifty-two samples were collected from the recently drilled wells tapping into the Nubian Sandstone Aquifer(NSA)in the Toshka region.Groundwater quality was assessed through hydrochemical analysis,Piper diagram,and various indicators such as Na%,SAR,RSC,KR,MH and PI.The hydrochemical analysis revealed improved groundwater quality characteristics,attributed to continuous recharge from Lake Nasser.The Piper diagram categorised most of the water samples as"secondary salinity"water type.Almost all wells proved suitable for irrigation with only two wells unsuitable based on MH values and six wells based on KR values.Considering Total Hardness(TH)values,all samples were classified as"Soft",indicating their suitability for domestic and industrial purposes.Water Quality Index(WQI)results concluded that all samples met WHO and FAO guidelines for drinking and irrigation,respectively.Spatial distribution maps,constructed using GIS,facilitate the interpretation of the results.Regular monitoring of quality parameters is essential to detect any deviation from permissible limits.

Simultaneous Interpreting Output Assessment of Earnings Conference Call: Case Analysis of Tencent 2022 Q3 Result Announcement

Quality in simultaneous interpreting is a frequently discussed concept. In the enterprise setting, earnings conference call remains a rarely explored field. This thesis offers a descriptive study on assessing interpreting quality from perspectives of fidelity, fluency, and appropriacy. As the corpus, Tencent 2022 Third Quarter Result Announcement provides an ideal transcript to the author to conduct its analysis. Interpreting is frequently done without bearing in mind the multitude of factors that can affect the quality of interpreting. Drawing a conclusion that the interpreter does make a lot of omissions, pauses and hesitations posing a negative effect on the fidelity, fluency and accuracy of the interpreting, the present author suggests that more preparation should be done for improving performance, such as terminologies, company background information, a reasonable speech rate, good image and acoustic quality, and so on.

Methodological quality(risk of bias) assessment tools for primary and secondary medical studies: What are they and which is better?

Methodological quality(risk of bias)assessment is an important step before study initiation usage.Therefore,accurately judging study type is the first priority,and the choosing proper tool is also important.In this review,we introduced methodological quality assessment tools for randomized controlled trial(including individual and cluster),animal study,non-randomized interventional studies(including follow-up study,controlled before-and-after study,before-after/pre-post study,uncontrolled longitudinal study,interrupted time series study),cohort study,case-control study,cross-sectional study(including analytical and descriptive),observational case series and case reports,comparative effectiveness research,diagnostic study,health economic evaluation,prediction study(including predictor finding study,prediction model impact study,prognostic prediction model study),qualitative study,outcome measurement instruments(including patient-reported outcome measure development,content validity,structural validity,internal consistency,cross-cultural validity/measurement invariance,reliability,measurement error,criterion validity,hypotheses testing for construct validity,and responsiveness),systematic review and meta-analysis,and clinical practice guideline.The readers of our review can distinguish the types of medical studies and choose appropriate tools.In one word,comprehensively mastering relevant knowledge and implementing more practices are basic requirements for correctly assessing the methodological quality.

Projection pursuit cluster model and its application in water quality assessment

One of the difficulties frequently encountered in water quality assessment is that there are many factors and they cannot be assessed according to one factor, all the effect factors associated with water quality must be used. In order to overcome this issues the projection pursuit principle is introduced into water quality assessment, and projection pursuit cluster(PPC) model is developed in this study. The PPC model makes the transition from high dimension to one-dimension. In other words, based on the PPC model, multifactor problem can be converted to one factor problem. The application of PPC model can be divided into four parts: (1) to estimate projection index function Q(); (2) to find the right projection direction ; (3) to calculate projection characteristic value of the i th sample z-i, and (4) to draw comprehensive analysis on the basis of z-i. On the other hand, the empirical formula of cutoff radius R is developed, which is benefit for the model to be used in practice. Finally, a case study of water quality assessment is proposed in this paper. The results showed that the PPC model is reasonable, and it is more objective and less subjective in water quality assessment. It is a new method for multivariate problem comprehensive analysis.

Soil Quality Assessment of Acid Sulfate Paddy Soils with Different Productivities in Guangdong Province,China

Land conversion is considered an effective measure to ensure national food security in China, but little information is available on the quality of low productivity soils, in particular those in acid sulfate soil regions. In our study, acid sulfate paddy soils were divided into soils with high, medium and low levels based on local rice productivity, and 60 soil samples were collected for analysis. Twenty soil variables including physical, chemical and biochemical properties were determined. Those variables that were significantly different between the high, medium and low productivity soils were selected for principal component analysis, and microbial biomass carbon （MBC）, total nitrogen （TN）, available silicon （ASi）, pH and available zinc （AZn） were retained in the minimum data set （MDS）. After scoring the MDS variables, they were integrated to calculate a soil quality index （SQI）, and the high, medium and low productivity paddy soils received mean SQI scores of 0.95, 0.83 and 0.60, respectively. Low productivity paddy soils showed worse soil quality, and a large discrepancy was observed between the low and high productivity paddy soils. Lower MBC, TN, ASi, pH and available K （AK） were considered as the primary limiting factors. Additionally, all the soil samples collected were rich in available P and AZn, but deficient in AK and ASi. The results suggest that soil AK and ASi deficiencies were the main limiting factors for all the studied acid sulfate paddy soil regions. The application of K and Si on a national basis and other sustainable management approaches are suggested to improve rice productivity, especially for low productivity paddy soils. Our results indicated that there is a large potential for increasing productivity and producing more cereals in acid sulfate paddy soil regions.

Quality control of Semen Ziziphi Spinosae standard decoction based on determination of multi-components using TOF-MS/MS and UPLC-PDA technology

A sensitive,fast and comprehensive method for the quality assessment of Semen Ziziphi Spinosae(SZS)standard decoction with characterization of its chemical components was developed and validated.UPLC-Q/TOF-MS/MS system was used to identify thirty-six chemical components of SZS standard decoction which included nucleosides,phenolic acids,alkaloids,and flavonoids.Furthermore,a UPLC-PDA method was validated to simultaneously determine adenosine,protocatechuic acid,magnoflorine,catechin,protocatechin,vicenin II,spinosin,kaempferol-3-rutinoside,and 6'''-feruloylspinosin which represent four species of characteristic compounds.The qualitative method had been validated according to Chinese Pharmacopoeia(2015 edition)in terms of lineary,repeatability,recovery and stability for all analytes,with the results showing good precision,accuracy and stability.In conclusion,the method using UPLC combined with MS and PDA provided a novel way for the standardization and identification of SZS standard decoction,and also offered a basis for qualitative analysis and quality assessment of the preparations for SZS standard decoction.

An ultra-robust fingerprinting method for quality assessment of traditional Chinese medicine using multiple reaction monitoring mass spectrometry

Chromatographic fingerprinting has been perceived as an essential tool for assessing quality and chemical equivalence of traditional Chinese medicine.However,this pattern-oriented approach still has some weak points in terms of chemical coverage and robustness.In this work,we proposed a multiple reaction monitoring(MRM)-based fingerprinting method in which approximately 100 constituents were simultaneously detected for quality assessment.The derivative MRM approach was employed to rapidly design MRM transitions independent of chemical standards,based on which the large-scale fingerprinting method was efficiently established.This approach was exemplified on QiShenYiQi Pill(QSYQ),a traditional Chinese medicine-derived drug product,and its robustness was systematically evaluated by four indices:clustering analysis by principal component analysis,similarity analysis by the congruence coefficient,the number of separated peaks,and the peak area proportion of separated peaks.Compared with conventional ultraviolet-based fingerprints,the MRM fingerprints provided not only better discriminatory capacity for the tested normal/abnormal QSYQ samples,but also higher robustness under different chromatographic conditions(i.e.,flow rate,apparent pH,column temperature,and column).The result also showed for such large-scale fingerprints including a large number of peaks,the angle cosine measure after min-max normalization was more suitable for setting a decision criterion than the unnormalized algorithm.This proof-of-concept application gives evidence that combining MRM technique with proper similarity analysis metrices can provide a highly sensitive,robust and comprehensive analytical approach for quality assessment of traditional Chinese medicine.

An integrated spectroscopic strategy to trace the geographical origins of emblic medicines: Application for the quality assessment of natural medicines

Emblic medicine is a popular natural source in the world due to its outstanding healthcare and therapeutic functions.Our preliminary results indicated that the quality of emblic medicines might have an apparent regional variation.A rapid and effective geographical traceability system has not been designed yet.To trace the geographical origins so that their quality can be controlled,an integrated spectroscopic strategy including spectral pretreatment,outlier diagnosis,feature selection,data fusion,and machine learning algorithm was proposed.A featured data matrix(245
220)was successfully generated,and a carefully adjusted RF machine learning algorithm was utilized to develop the geographical traceability model.The results demonstrate that the proposed strategy is effective and can be generalized.Sensitivity(SEN),specificity(SPE)and accuracy(ACC)of 97.65%,99.85%and 97.63%for the calibrated set,as well as 100.00%predictive efficiency,were obtained using this spectroscopic analysis strategy.Our study has created an integrated analysis process for multiple spectral data,which can achieve a rapid,nondestructive and green quality detection for emblic medicines originating from seventeen geographical origins.

Quality Assessment of FY-4A Lightning Data in Inland China

The Lightning Mapping Imager(LMI)equipped on the FY-4 A(Feng Yun-4 A)geostationary satellite achieves lightning positioning through optical imaging and has the advantages of high temporal resolution,high stability,and continuous observation.In this study,FY-4 A LMI lightning event,group and flash data from April to August 2018 are selected,and their quality are assessed through qualitative and quantitative comparison with the ground-based Advanced Time of Arrival and Direction system(ADTD)lightning observation network data and the American International Space Station(ISS)lightning imaging sensor(LIS)data.The results show that the spatial distributions of FY-4 A lightning are consistent with those of the ground-based ADTD and ISS LIS.The temporal variation in FY-4 A lightning group frequency is consistent with that of ADTD stroke,which reflects that FY-4 A LMI can capture the lightning occurrence in inland China.Quantitative statistics show that the consistency rate of FY-4 A LMI and ISS LIS events is relatively high but their consistency rate is lower in terms of lightning group and flash data.Compared with the lightning observations by the ISS LIS and the ground-based ADTD,FY-4 A LMI reports fewer lightning events in the Tibetan Plateau.The application of Tibetan Plateau lightning data requires further processing and consideration.

Value of quality of life analysis in liver cancer: A clinician's perspective

Health related quality of life(HRQOL) is increasingly recognized as an important clinical parameter and research endpoint in patients with hepatocellular carcinoma(HCC). HRQOL in HCC patients is multifaceted and affected by medical factor which encompasses HCC and its complications, oncological and palliative treatment for HCC, underlying liver disease, as well as the psychological, social or spiritual reaction to the disease. Many patients presented late with advanced disease and limited survival, plagued with multiple symptoms, rendering QOL a very important aspect in their general well being. Various instruments have been developed and validated to measure and report HRQOL in HCC patients, these included general HRQOL instruments, e.g., Short form(SF)-36, SF-12, Euro Qo L-5D, World Health Organization Quality of Life Assessment 100(WHOQOL-100), World Health Organization Quality of Life Assessment abbreviated version; general cancer HRQOL instruments, e.g., the European Organisation for Research and Treatment of Cancer(EORTC) QLQ-C30, Functional Assessment of Cancer Therapy(FACT)-General, Spitzer Quality of Life Index; and liver-cancer specific HRQOL instruments, e.g., EORTC QLQ-HCC18, FACT-Hepatobiliary(FACT-Hep), FACT-Hep Symptom Index, Trial Outcome Index. Important utilization of HRQOL in HCC patients included description of symptomatology and HRQOL of patients, treatment endpoint in clinical trial, prognostication of survival, benchmarking of palliative care service and health care valuation. In this review, difficulties regarding the use of HRQOL data in research and clinical practice, including choosing a suitable instrument, problems of missing data, data interpretation, analysis and presentation are examined. Potential solutions are also discussed.

Slope excavation quality assessment and excavated volume calculation in hydraulic projects based on laser scanning technology

Slope excavation is one of the most crucial steps in the construction of a hydraulic project. Excavation project quality assessment and excavated volume calculation are critical in construction management. The positioning of excavation projects using traditional instruments is inefficient and may cause error. To improve the efficiency and precision of calculation and assessment, three-dimensional laser scanning technology was used for slope excavation quality assessment. An efficient data acquisition, processing, and management workflow was presented in this study. Based on the quality control indices, including the average gradient, slope toe elevation, and overbreak and underbreak,cross-sectional quality assessment and holistic quality assessment methods were proposed to assess the slope excavation quality with laserscanned data. An algorithm was also presented to calculate the excavated volume with laser-scanned data. A field application and a laboratory experiment were carried out to verify the feasibility of these methods for excavation quality assessment and excavated volume calculation. The results show that the quality assessment indices can be obtained rapidly and accurately with design parameters and scanned data, and the results of holistic quality assessment are consistent with those of cross-sectional quality assessment. In addition, the time consumption in excavation quality assessment with the laser scanning technology can be reduced by 70%e90%, as compared with the traditional method. The excavated volume calculated with the scanned data only slightly differs from measured data, demonstrating the applicability of the excavated volume calculation method presented in this study.