Diagenetic Evolution and Formation Mechanisms of High-Quality Reservoirs under Multiple Diagenetic Environmental Constraints:An Example from the Paleogene Beach-Bar Sandstone Reservoirs in the Dongying Depression,Bohai Bay Basin

The diagenetic environment, diagenetic responses, diagenetic transformation model and formation mechanisms of high-quality reservoirs（beach-bar sandstones of the Paleogene fourth member） in the Dongying depression were studied through the analysis of fluid inclusions, thin section and burial evolution history. The diagenetic fluids of the beach-bar sandstone reservoirs evolved from early high salinity and weak alkalinity to low salinity and strong acidity, late high salinity and strong alkalinity and late low salinity and acidity, which were accompanied by two stages of oil and gas filling. The fluids at the margins of the sandbodies were continuously highly saline and strongly alkaline. The western（eastern） reservoirs experienced early open（closed）, middle open, and late closed diagenetic environments during their burial history. The flow pattern was characterized by upwelling during the majority of the diagenesis（in the east, a non-circulating pattern transitioned into an upwelling current）. Due to the evolution of the diagenetic fluids, the diagenetic sequence of the beach-bar reservoirs was as follows： early weak carbonate cementation; feldspar and carbonate cement dissolution and authigenic quartz cementation; late carbonate and anhydrite cementation, authigenic feldspar cementation, and late quartz dissolution; and late carbonate cementation, feldspar dissolution, and authigenic quartz cementation. The diagenetic strength during these stages varied or was absent altogether in different parts of the reservoirs. Due to the closeness of the diagenetic environment and the flow pattern of the diagenetic fluids, the diagenetic products are variably distributed in the sandstones interbedded with mudstones and in the fault blocks. The evolution of multiple alternating alkaline and acidic diagenetic environments controlled the distribution patterns of the reservoir diagenesis and reservoir space, and the reservoir quality index, RQI, increased gradually from the margins to the centers of the sandstones. The closeness of the diagenetic environment and the flow patterns of the diagenetic fluids controlled the differences in the reservoir properties among the fault blocks. With increasing distance from the oil-source faults, the RQI values in the west gradually decreased and in the east initially increased and then decreased.

Formation mechanisms and distribution of high quality reservoirs in deep strata in Palaeogene in northern steep slope zone of Bonan sag, Jiyang depression, China

Petrographic analysis combined with various techniques, such as thin section identification, petro-physical property testing, mercury penetration, oil testing results, was used to assess basic reservoir characteristics of deep strata in Palaeogene in the northern steep slope zone of the Bonan sag, China. The formation mechanisms of high quality reservoirs in deep strata were discussed according to evolution characteristics of paleopressures and paleofluids in geological period. The deep reservoirs have poor physical properties and mainly develop extra-low porosity, extra-low and ultra-low permeability reservoirs. Reservoir spaces mainly consist of secondary pores and overpressure fractures. Early overpressure, early hydrocarbon filling and dissolution by early organic acids are the major formation mechanisms of high quality reservoirs. The conglomerate in inner fan which had a poor primary physical property mainly experienced strong compaction and calcareous matrix recrystallization. The physical properties of the inner fan were poor with weak dissolution because of poor mobility of fluid. The reservoirs mainly are type IV reservoirs and the distribution extends with the burial depth. The braided channel reservoirs in the middle fan had relative good primary physical properties and strong ability to resist compaction which favored the preservation of primary pores. Large amounts of the secondary porosities were created due to dissolution by early organic acids. A series of micro-fractures generated by early overpressures would be important migration pathways for hydrocarbon and organic acids. Furthermore, early overpressures had retarded maturation of organic matters and organic acids which had flowed into reservoirs already and could keep in acid environment for a long time. This process would contribute significantly to reinforcing the dissolution and enhancing the reservoir quality. The braided channel reservoirs were charged with high oil saturation preferentially by early hydrocarbon filling which could inhibit later cementation. Therefore, the braided channel reservoirs develop a great quantity of reservoir spaces with type I, type II and type III reservoirs in the majority in the deep strata. With the burial depth, distributions of type I and type II reservoirs are narrowed and distribution of type III reservoirs decreases first and then extends. The reservoirs both in outer fan and in interdistributary of the middle fan have extremely poor physical properties because of extensive carbonate cementation. The type of the reservoirs mainly is type IV.

Reservoir quality evaluation of the Narimba Formation in Bass Basin,Australia:Implications from petrophysical analysis,sedimentological features,capillary pressure and wetting fluid saturation

The evaluation of reservoir quality was accomplished on the Late Paleocene to Early Eocene Narimba Formation in Bass Basin,Australia.This study involved combination methods such as petrophysical analysis,petrography and sedimentological studies,reservoir quality and fluid flow units from derivative parameters,and capillary pressure and wetting fluid saturation relationship.Textural and diagenetic features are affecting the reservoir quality.Cementation,compaction,and presence of clay minerals such as kaolinite are found to reduce the quality while dissolution and secondary porosity are noticed to improve it.It is believed that the Narimba Formation is a potential reservoir with a wide range of porosity and permeability.Porosity ranges from 3.1%to 25.4%with a mean of 15.84%,while permeability ranges between 0.01 mD and 510 mD,with a mean of 31.05 mD.Based on the heterogenous lithology,the formation has been categorized into five groups based on permeability variations.Group I showed an excellent to good quality reservoir with coarse grains.The impacts of both textural and diagenetic features improve the reservoir and producing higher reservoir quality index(RQI)and flow zone indicators(FZI)as well as mostly mega pores.The non-wetting fluid migration has the higher possibility to flow in the formation while displacement pressure recorded as zero.Group II showed a fair quality reservoir with lower petrophysical properties in macro pores.The irreducible water saturation is increasing while the textural and digenetic properties are still enhancing the reservoir quality.Group III reflects lower quality reservoir with mostly macro pores and higher displacement pressure.It may indicate smaller grain size and increasing amount of cement and clay minerals.Group IV,and V are interpreted as a poor-quality reservoir that has lower RQI and FZI.The textural and digenetic features are negatively affecting the reservoir and are leading to smaller pore size and pore throat radii(r35)values to be within the range of macro,meso-,micro-,and nano pores.The capillary displacement pressure curves of the three groups show increases reaching the maximum value of 400 psia in group V.Agreement with the classification of permeability,r35 values,and pore type can be used in identifying the quality of reservoir.

Diagenetic evolution and reservoir quality of the Oligocene sandstones in the Baiyun Sag, Pearl River Mouth Basin, South China Sea

The Oligocene Zhuhai sandstones are significant reservoirs for hydrocarbons in the Baiyun Sag, South China Sea.For effective appraisal, exploration and exploitation of such a deep-water hydrocarbon sandstone, samples of five wells from depths of 850 m to 3 000 m were studied. A series of comprehensive petrographic and geochemical analyses were performed to unravel the diagenetic features and their impact on the reservoir quality.Petrographically, the sandstones are dominated by feldspathic litharenites and lithic arenites with fine to medium grain sizes and moderate to good sorting. The reservoir quality varies greatly with a range of porosity from 0.2% to 36.1% and permeability from 0.016 ×10~(–3) μm~2 to 4 301 ×10~(–3) μm~2, which is attributed to complex diagenetic evolution related to sedimentary facies;these include compaction, cementation of calcite, dolomite, siderite and framboidal pyrite in eogenetic stage;further compaction, feldspar dissolution, precipitation of ferrocalcite and ankerite, quartz cements, formation of kaolinite and its illitization, precipitation of albite and nodular pyrite, as well as hydrocarbon charge in mesogenetic stage. The dissolution of feldspar and illitization of kaolinite provide internal sources for the precipitation of quartz cement, while carbonate cements are derived from external sources related to interbedded mudstones and deep fluid. Compaction is the predominant factor in reducing the total porosity, followed by carbonate cementation that leads to strong heterogeneity. Feldspar dissolution and concomitant quartz and clay cementation barely changes the porosity but significantly reduces the permeability.The high-quality reservoirs can be concluded as medium-grained sandstones lying in the central parts of thick underwater distributary channel sandbodies(>2 m) with a high content of detrital quartz but low cement.

Reservoir Quality Controlling Factor of the Asmari Reservoir in an Oil Field in Dezful Embayment, SW Iran

The Asmari Formation Oligo-Miocene in age is one of the most important reservoir rocks in SW Iran and Zagros basin and composed of carbonate rocks and locally sandstones and evaporates. In this research, reservoir quality controlling factors have been investigated in a well in one of the oil fields in Dezful Embayment, SW Iran. Based on this research, depositional environment, diagenesis and fracturing have been affected on reservoir quality. 3 distinct depositional settings can be recognized in the studied interval including tidal flat, lagoon, and shoal. Among these depositional setting, shoal environment with ooid grainstone microfacies along with interparticle porosity shows good reservoir characteristics. Diagenetic processes also play an important role on reservoir quality;dolomitization and dissolution have positive effects on porosity and enhances reservoir quality, while cementation, anhydritization and compaction have negative effect on it. Fracturing is another important factor affected on the carbonate reservoirs especially in the Asmari Formation.

Reservoir quality evaluation using sedimentological and petrophysical characterization of deep-water turbidites:A case study of Tariki Sandstone Member,Taranaki Basin,New Zealand

The current study aims to ascertain the reservoir characteristics of the Tariki Sandstone Member of the Otaraoa Formation,Taranaki Basin,New Zealand.This study was carried out by integrating the comprehensive petrophysical evaluation,sedimentological and petrographic studies,as well as well log analysis by using data from six wells.The porosity-permeability relationship is used to divide the samples of the Tariki Sandstone Member into reservoir and non-reservoir facies.A thorough petrophysical analysis shows that the maximum porosity values fluctuate between 16.6%and 22.1%,while permeability ranges from 102 mD to 574 mD,which indicates fair to good reservoir quality.Moreover,the Tariki sandstone represents six hydraulic flow units with a high reservoir quality index and flow zone indicator representing good reservoir characteristics.The pore size varies between nano and megapores with dominant macropores.Based on the sedimentological and petrographic analysis,the Tariki Sandstone Member is classified as a combination of subarkose,arkose,and lithic arkose with fine to medium and moderately to moderately well-sorted grains.The main diagenetic factor affecting the reservoir quality is cementation,which occupied all the pores with calcite.On the bright side,the secondary pores are developed due to the dissolution of calcite cement and few grains.The well log analysis demonstrates the presence of low clay volume ranging from 0.3%to 3.1%,fair to good effective porosity values between 13.6%and 15.9%,net pay thickness from 18.29 m to 91.44 m,and hydrocarbon saturation from 56%to 77.9%.The findings from this study revealed that the Tariki Sandstone Member possesses fair to good reservoir quality and hydrocarbon potential,which indicate submarine fans as appealing hydrocarbon reservoirs.This study can be used in similar depositional environments elsewhere in the world.

Impacts of Depositional Facies and Diagenesis on Reservoir Quality:A Case Study from the Rudist-bearing Sarvak Formation,Abadan Plain,SW Iran

An integrated geological-petrophysical analysis of the rudist-bearing sequence of the Cretaceous Sarvak Formation is given one giant oilfield,and provides an improved understanding of this main reservoir in the Abadan Plain,in the Zagros Basin,SW Iran.The main objective of this study is to evaluate reservoir potential of the Sarvak Formation,and then to utilize the calibrated well log signature to correlate reservoir potential in un-cored wells.Eight main facies are recognized and categorized in five facies groups:lagoon,shoal,rudist-biostrome,slope,and shallow open marine,deposited on a shelf carbonate platform.Given the distribution of diagenetic products and their effects on pore systems,three diagenetic facies namely,(DF-1)low dissolution and cementation;(DF-2);high dissolution;and(DF-3)high cementation are differentiated.The initial sedimentary characteristics in combination with distribution of diagenetic products play an important role in reservoir quality heterogeneity.The effect of diagenetic processes related to disconformities mainly depends on the facies nature below these surfaces.Grain-dominated facies of shoal and rudist debris,observed below the Cenomanian–Turonian disconformity,are mostly characterized by high dissolution and interconnected pore systems.Finally,depositional and diagenetic facies in the studied wells are correlated by petrophysical well log data,leading to distribution of the reservoir zones.Data obtained can be utilized for efficient reservoir characterization of the Sarvak Formation and its equivalent units in the Arabian Plate.

Origin of carbonate minerals and impacts on reservoir quality of the Wufeng and Longmaxi Shale, Sichuan Basin

The Ordovician-Silurian Wufeng and Longmaxi Shale in the Sichuan Basin were studied to understand the genesis and diagenetic evolution of carbonate minerals and their effects on reservoir quality. The results of geochemical and petrological analyses show that calcite grains have a negative Ce anomaly indicating they formed in the oxidizing environment of seawater. The high carbonate mineral contents in the margin of basin indicate that calcite grains and cores of dolomite grains appear largely to be of detrital origin. The rhombic rims of dolomite grains and dolomite concretions with the δ^(13)C of –15.46‰ and the enrichment of middle rare earth elements were formed during the sulfate-driven anaerobic oxidation of methane. The calcite in radiolarian were related to the microbial sulfate reduction for the abundant anhedral pyrites and δ^(13)C value of –11.34‰. Calcite veins precipitated in the deep burial stage with homogenization temperature of the inclusions ranging from 146.70 ℃ to 182.90 ℃. The pores in shale are mainly organic matter pores with pore size mainly in the range of 1–20 nm in diameter. Carbonate minerals influence the development of pores through offering storage space for organic matter. When calcite contents ranging from 10% to 20%, calcite grains and cement as rigid framework can preserve primary pores. Subsequently, the thermal cracking of liquid petroleum in primary pores will form organic matter pores. The radiolarian were mostly partially filled with calcite, which combining with microcrystalline quartz preserved a high storage capacity.

Variation and mechanisms of clastic reservoir quality in the Paleogene Shahejie Formation of the Dongying Sag, Bohai Bay Basin, China

Reservoir quality varies greatly in the Shahejie Formation in the Dongying Sag. It is essential to analyze the variation and mechanisms of reservoir quality for determining the controlling factors based on cores, porosity measurements and fluid inclusion techniques and so on. The sandstones in the fluvial, （fan） delta-front have the best reservoir quality due to the depositional conditions mechanically controlling the petrology configuration and the primary porosity, and chemically influencing the diagenesis and development of secondary pores. The activity of the boundary faults and the sedimentary facies dominate the variation of reservoir quality in different areas and intervals. The reservoir quality varies with the position of sandstone beds in different vertical models of sandstone and mudstone. This mainly arose from the strong cementation or strong dissolution in the sandstone caused by the diagenesis evolution of adjacent mudstone. With higher oil saturation reservoir quality is better because the hydrocarbon charge favors dissolution and restricts cementation. Diagenesis, depositional conditions and tectonic setting are the key controls of reservoir quality in the Shahejie Formation of the Dongying Sag.

Diagenesis and Its Effect on Reservoir Quality of Silurian Sandstones,Tabei Area,Tarim Basin,China

The diagenetic processes of the Tabei sandstones in the Tarim Basin include compaction, cementation （quartz overgrowths, calcite, clay minerals and a minor amount of pyrite）, and dissolution of the feldspar and calcite cement. Porosity was reduced by compaction from an assumed original 40% to about 22.1%. Cementation reduced porosity to 26.6%. The Tabei sandstones lost a little more porosity by compaction than by cementation. Quartz cementation, especially syntaxial quartz overgrowth, is a major cause of porosity-loss in many reservoirs in moderately to deeply buried sandstone. Calcite cementation played a key role in the porosity evolution of sandstones. At the early stage of burial, the early calcite cement occupied most of the pore spaces resulting in significant porosity. On the other hand, some primary porosity has been preserved due to incomplete filling or the presence of scattered patches of calcite cement. In addition to calcite, several clay minerals, including illite and chlorite occurred as pore-filling and pore-lining cements. The pore-lining chlorite may have helped in retaining the porosity by preventing the precipitation of syntaxial quartz overgrowths. Illite, which largely occurred as hair-like rims around the grains and bridges on the pore throats, caused a substantial deterioration of penetrability of the reservoir. Calcite cement dissolution was extensive and contributed significantly to the development of secondary porosity.

Chlorite cement and its effect on the reservoir quality of sandstones from the Panyu low-uplift,Pearl River Mouth Basin

Based on porosity and permeability measurements, mercury porosimetry measurements, thin section analyses, SEM observations, X-ray diffraction （XRD） analysis and granulometric analyses, diagenetic features of reservoir sandstones taken from the Zhuhai formation in the Panyu low-uplift of the Pear River Mouth Basin were examined. This study shows that chlorite cements are one of the most important diagenetic features of reservoir sandstones. The precipitation of chlorite was controlled by multiple factors and its development occurred early in eo-diagenesis and continued till Stage A of middle diagenesis. The precipitation of chlorite at the early stage was mainly affected by the sedimentary environment and provenance. Abundant Fe- and Mg-rich materials were supplied during the deposition of distributary channel sediments in the deltaic front setting and mainly in alkaline conditions. With the burial depth increasing, smectite and kaolinite tended to be transformed into chlorite. Smectite cements were completely transformed into chlorite in sandstones of the studied area. Volcanic lithics rich in Fe and Mg materials were dissolved and released Fe2＋ and Mg 2＋ into the pore water. These cations precipitated as chlorite cements in middle diagenesis in an alkaline diagenetic environment. Chlorite coatings acted as porosity and permeability, thus helping preserve cements in the chlorite cemented sandstones. The reservoir quality of chlorite cemented sandstones is much better than sandstones without chlorite cements. Chlorite cements play an important role in the reservoir evolution that was mainly characterized by preserving intergranular porosity and forming better pore-throat structures of sandstones.

Diagenesis and reservoir quality of the fourth member sandstones of Shahejie formation in Huimin depression,eastern China

Petrographic analysis combined with various techniques, such as scanning electron microscopy and X-ray diffraction, was used to assess the timing of growth and original mineral cements, the controls on reservoir and reservoir quality of the fourth member sandstones of Shahejie formation (Es4). The Es4 sandstones are mostly arkose and lithic arkose, rarely feldspathic litharenite, with an average mass fraction of quartz 51.6%, feldspar 33.8% and rock fragments 14.6% (Q51.6F33.8R14.6). They have an average framework composition (mass fraction) of quartz 57.10%, K-feldspar 5.76%, sodium-calcium feldspar 13.00%, calcite 5.77%, dolomite 5.63%, siderite 0.95%, pyrite 0.30%, anhydrite 0.04%, and clay mineral 11.46%. The diagenentic minerals typically include kaolinite, illite-smectite (I/S), illite, chlorite, authigenetic quartz and feldspar, and carbonate and pyrite. Es4 sandstone has undergone stages A and B of eodiagenesis, and now, it is experiencing stage A of mesodiagenesis. Reservoir quality is predominantly controlled by the mechanical compaction, for example, 45.65% of the original porosity loss is related to compaction. The original porosity loss related with cementation is only 26.00%. The reservoir quality is improved as a result of dissolution of feldspar, rock fragment and so forth. The porosity evolved from dissolution varies from 3% to 4%.

Prediction of multiscale laminae structure and reservoir quality in fine-grained sedimentary rocks:The Permian Lucaogou Formation in Jimusar Sag,Junggar Basin

Fine-grained sedimentary rocks have become a research focus as important reservoirs and source rocks for tight and shale oil and gas.Laminae development determines the accumulation and production of tight and shale oil and gas in fine-grained rocks.However,due to the resolution limit of conventional logs,it is challenging to recognize the features of centimeter-scale laminae.To close this gap,complementary studies,including core observation,thin section,X-ray diffraction(XRD),conventional log analysis,and slabs of image logs,were conducted to unravel the centimeter-scale laminae.The laminae recognition models were built using well logs.The fine-grained rocks can be divided into laminated rocks(lamina thickness of<0.01 m),layered rocks(0.01-0.1 m),and massive rocks(no layer or layer spacing of>0.1 m)according to the laminae scale from core observations.According to the mineral superposition assemblages from thin-section observations,the laminated rocks can be further divided into binary,ternary,and multiple structures.The typical mineral components,slabs,and T2spectrum distributions of various lamina types are unraveled.The core can identify the centimeter-millimeter-scale laminae,and the thin section can identify the millimeter-micrometer-scale laminae.Furthermore,they can detect mineral types and their superposition sequence.Conventional logs can identify the meter-scale layers,whereas image logs and related slabs can identify the laminae variations at millimeter-centimeter scales.Therefore,the slab of image logs combined with thin sections can identify laminae assemblage characteristics,including the thickness and vertical assemblage.The identification and classification of lamina structure of various scales on a single well can be predicted using conventional logs,image logs,and slabs combined with thin sections.The layered rocks have better reservoir quality and oil-bearing potential than the massive and laminated rocks.The laminated rocks’binary lamina is better than the ternary and multiple layers due to the high content of felsic minerals.The abovementioned results build the prediction model for multiscale laminae structure using well logs,helping sweet spots prediction in the Permian Lucaogou Formation in the Jimusar Sag and fine-grained sedimentary rocks worldwide.

Diagenetic and Depositional Impacts on the Reservoir Quality of the Upper Jurassic Arab Formation in the Balal Oilfield, Offshore Iran

The Kimmeridgian-Tithonian aged Arab Formation, as the main reservoir of the Jurassic succession in the Balal oilfield, located in the offshore region of the Iranian sector of the Persian Gulf, is investigated in this study. The formation is composed of dolomites and limestones with anhydrite interbeds. Based on detailed petrographic studies, six microfacies are recognized, which are classified in four sub-environments including supratidal, intertidal, lagoonal and the high energy shoal of a homoclinal carbonate ramp. The main diagenetic features of the studied succession include dolomitization, anhydritization, cementation, micritization, fracturing and compaction. Based on stable isotope data, dolomitization of the upper Arab carbonates is related to sabkha settings （i.e. evaporative type）. In terms of sequence stratigraphy, three shallowing-upward sequences are recognized, based on core and wireline log data from four wells of the studied field. Considering depositional and diagenetic effects on the reservoir quality, the studied facies are classified into eight reservoir rock types （RRT） with distinct reservoir qualities. Dolomitization has played a major role in reservoir quality enhancement, whereas anhydritization, carbonate cementation, and compaction have damaged the pore throat network. Distribution of the recognized RRTs in time and space are discussed within the context of a sequence stratigraphic framework.

How argillaceous reservoirs exhibit better quality than silty mudstones?Anomalous behavior of shale gas-bearing properties of continental fine-grained sediments in Southwest China and its possible forcing mechanisms

Achieving a thorough understanding of how primary sedimentary granularity drives considerable heterogeneity in internal reservoir attributes of terrigenous fine-grained deposits is of great significance.We investigated the quantitative differentiation and its corresponding driving forces of physical reservoir properties and pore-structure characteristics of silty-mud sediments in the Upper Triassic Xujiahe Formation(SW China)using a multi-method approach.The results show that the micro-mesopore volume and surface area of mudstones/shales are apparently higher than those of silty mudstones and a remarkable threefold rise in average permeability also presents.Extensively distributed bitumen pores occurring mostly along brittle mineral grains or forming clay-organic complexes make considerable contributions to shrinking microcracks.Furthermore,an evidently higher concentration of clay minerals in mudstone/shale reservoirs is primarily responsible for development of the two types of clay intercrystalline pores distributed along grain aggregates and between well-oriented platelets.These two major causes facilitate the formation of micro-bedding fractures/non-bedding micro fractures and connected fracture and pore-fracture networks,and also high-quality argillaceous reservoirs by strongly enhancing storage spaces and seepage capacities.Finally,a conceptual model is established for interpreting a differential reservoir-forming mechanism and corresponding two-sided effects on petrophysical and reservoir quality properties for continental silty-mud sediments.

Quality variations and controlling factors of deepwater submarine-fan reservoirs,Rovuma Basin,East Africa

The mechanisms causing quality variations and key control factors of submarine-fan reservoirs in the gas field X of the Rovuma Basin,East Africa are analyzed based on core and well-log data in this paper.Depositional fabric,lithofacies difference and characteristics of genetic units are the fundamental reasons of reservoir quality variations.In the case of weak cementation,porosity and permeability of submarine-fan reservoirs are controlled by grain sorting and clay content,respectively.Reservoir quality variations for 5 main lithofacies are related to variable depositional fabrics and calcite cementation.Among them,massive medium-coarse sandstones with weak cementation have the highest porosity and permeability,and coarser or finer sandstones have poorer reservoir quality.The existence of bottom current can develop laminated sandstones,improving the pore structure and physical properties greatly.Lithofacies vary among different types,locations and stages of genetic units,and they control the distribution patterns of submarine-fan reservoir quality:the physical properties of channel shaft or lobe main body are better than those of the channel or lobe edge.The sandstone sorting and physical properties are gradually improved from near-source to far-source.When multi-stage sand bodies are superimposed,the sand-mud ratio in the later stage is higher than that in the earlier stage,making the physical properties get better in the later stage.

Reservoir Quality and Porosity Preservation of Tertiary Sandstones in Tarim Basin

Three productive layers have been proved in the Tertiary sequence of Tarim basin. At depths of more than 5 000 m, the Tertiary reservoir sandstones or Northern Tarim is found to have porosities greater than 15% and permeabilities up to 1 000×10-3μm2.These pores are intergrauular and appear to be primary that bave survived rrom compaction and cementation. Based on the lithology data, physical properties and pere conriguration as well as characteristics of oil and gas production, tbe reservoir quality of 8andstones was evaluated and divided into three ranks. The reservoir quaIity of Tertiary sandstone bodies is also depeudent upon diagenetic processes. The author proposes a porosity evolutiou model to explain the origin of primary porosity preservation. Several factors may have contributed to POrosity preservation: rapid burial, low paleogeothermal gradient, early iron oxidation and chlorite coatiug, partlal Pore filling by early calcite and gyp-sum.

Reservoir quality of fluvial sandstone reservoirs in salt-walled mini- basins： an example from the Seagull field, Central Graben, North Sea, UK

The Triassic fluvial sandstones of the Skagerrak Formation were deposited in a series of salt-walled mini-basins and act as important hydrocarbon reservoirs for several high-pressure, high-temperature（HPHT） fields in the Central Graben, North Sea. The HPHT reservoirs exhibit excellent reservoir quality considering their depth of burial and hence have been of high interest for hydrocarbon exploration. This research uses a multidisciplinary approach to assess the Skagerrak Formation fluvial reservoir quality from the Seagull field incorporating core analysis, petrography, electron microscopy, XRD analysis, fluid inclusion appraisal and burial history modelling. Halokinesis and salt withdrawal at the margin of the saltwalled mini-basin induced early disaggregation bands and fractures at shallow burial and led to increased influx of meteoric water and clay mineral infiltration from overlying sedimentation. The density of disaggregation bands correlates with the occurrence and magnitude of pore-filling authigenic clay minerals, concentrated along the margin of the saltwalled mini-basin. The fluvial channel sandstones of the Skagerrak Formation are subject to strong intra-basinal spatial reservoir quality variations despite diagenesis and low vertical effective stress having played a favourable role in arresting porosity loss.

Genesis of calcite vein in basalt and its effect on reservoir quality: A case study of the Carboniferous in the east slope of Mahu sag, Junggar Basin, NW China

The characteristics and genesis of the calcite veins in Carboniferous basalt in the east slope of Mahu Sag,Junggar Basin are investigated based on observation of cores and thin sections;analyses of X-ray fluorescence,in situ major,trace and rare earth elements(REE),carbon,oxygen and strontium isotopes,fluid inclusions,as well as basin modeling.There are three periods of calcite fillings.The Period I calcite is characterized by low Mn content,flat REE pattern,strong negative cerium(Ce)anomaly,weak to moderate negative Eu anomaly,and light carbon isotopic composition,indicating the formation of the calcite was affected by meteoric water.The Period II calcite shows higher Mn and light REE contents,weak positive Ce anomaly and slight positive europium(Eu)anomaly,and a little heavier carbon isotopic composition and slightly lower strontium isotope ratio than the Period I calcite,suggesting that deep diagenetic fluids affected the formation of the Period II calcite to some extent.The Period III calcite is rich in iron and manganese and has REE pattern similar to that of the Period II calcite,but the cerium and europium enomalies vary significantly.The Period I and II calcites were formed in shallow diagenetic environment at approximately 250–260 Ma,corresponding to Late Hercynian orogeny at Late Permian.The PeriodⅢcalcite was probably formed in the Indo-China movement during Late Triassic.It is believed that the precipitation of calcite in basalt fractures near unconformity was related to leaching and dissolution of carbonates in the overlying Lower Permian Fengcheng Formation by meteoric water,which destructed the Carboniferous weathering crust reservoirs in early stage.Relatively high quality reservoirs could be developed in positions with weak filling and strong late dissolution,such as structural high parts with Fengcheng Formation missing,distant strata from Fengcheng Formation vertically,buried hills inside lake basin,etc.

Quality characterization of tight sandstone reservoirs in the Yanchang Formation of the Honghe oilfield, Ordos Basin, central China

Reservoir quality is one of the important geological factors controlling the development of tight oil in the Honghe oilfield,Ordos Basin,northwestern China.Analyses of core,well logging,mud logging and geophysical data as well as thin sections(casting and fluorescence)were combined with testing methods(such as grain size analysis,constant-rate mercury injection,and scanning electron microscopy)to characterize the microporeethroat development in reservoirs of the eighth member of Yanchang For-mation in the oilfield.From the perspective of sedimentation and diagenesis,the mechanisms causing reservoir quality difference were explored and a method for characterizing reservoir quality difference and distribution was proposed.The results show that complex and diverse poreethroat configurations and multi-scale throat development are the microscale manifestations of reservoir quality differences in the member.Three types of poreethroat combinations are recognized,including intergranular pore-wide lamellar throat,intergranular and intragranular pore-wide lamellar throat,and intergranular/clustered micropore-wide lamellar throat.Different diagenesis processes and intensities under the control of sedimentary conditions determine the differential development of the reservoirs.Diagenetic facies are the indicators of reservoir quality.Diagenetic facies with chlorite cementation-moderate dissolution indicates reservoirs with the most ideal physical properties for hydrocarbon accumulation,while that with moderate calcite and kaolinite cementations are usually observed in reservoirs with less ideal physical properties.Reservoirs with the worst physical properties often correlate with diagenetic facies with strong calcite cementation and compaction facies.A multi-level constrained method under the control of sedimentation and diagenetic facies is proposed for characterizing tight reservoir quality difference in the member.The spatial distribution of sedimentary elements is analyzed through sedi-mentary configurations,the diagenetic facies distribution is constrained by sedimentary elements and the reservoir quality distribution is predicted with constraint of diagenetic facies.It suggests that the high-quality reservoirs in the member occur vertically in the middle of thick channel sandstone,while poor reservoirs occur in the upper or lower parts of the channel sandstone due to intensive compaction and cementation.Laterally,the quality of reservoirs enhances along the channels with a change in shape to lens or strips along the middle and downstream sections.