Earthquake investigations have illustrated that even code-compliant reinforced concrete frames may suffer from soft-story mechanism.This damage mode results in poor ductility and limited energy dissipation.Continuous ...Earthquake investigations have illustrated that even code-compliant reinforced concrete frames may suffer from soft-story mechanism.This damage mode results in poor ductility and limited energy dissipation.Continuous components offer alternatives that may avoid such failures.A novel infilled rocking wall frame system is proposed that takes advantage of continuous component and rocking characteristics.Previous studies have investigated similar systems that combine a reinforced concrete frame and a wall with rocking behavior used.However,a large-scale experimental study of a reinforced concrete frame combined with a rocking wall has not been reported.In this study,a seismic performance evaluation of the newly proposed infilled rocking wall frame structure was conducted through quasi-static cyclic testing.Critical joints were designed and verified.Numerical models were established and calibrated to estimate frame shear forces.The results evaluation demonstrate that an infilled rocking wall frame can effectively avoid soft-story mechanisms.Capacity and initial stiffness are greatly improved and self-centering behavior is achieved with the help of the infilled rocking wall.Drift distribution becomes more uniform with height.Concrete cracks and damage occurs in desired areas.The infilled rocking wall frame offers a promising approach to achieving seismic resilience.展开更多
The effects of microstructure on quasi-static transverse loading behavior of 3D circular braided composite tubes were studied. Transverse loading tests were conducted. Transverse load-deflection curves were obtained t...The effects of microstructure on quasi-static transverse loading behavior of 3D circular braided composite tubes were studied. Transverse loading tests were conducted. Transverse load-deflection curves were obtained to analyze the effects of braiding parameters including the braiding angle, the wall thickness, and the diameter on the transverse loading of 3D circular braided composite tubes. Breaking loads, moduli and strengths had also been used to describe the transverse loading behaviors. The failure morphologies were shown to reveal damage mechanisms. From the results, the increase in braiding angle, wall thickness and diameter increases the ability of anti-deformation and breaking load of braided tubes. The breaking load of specimen with a braiding angle of 45° is about 1.68 times that of specimen with a braiding angle of 15°. The breaking load of specimen with 4 layers of yarns is about 2.15 times that of specimen with 2 layers of yarns. The breaking load of the tube with a diameter of 25.5 mm is about 2.39 times that of the tube with a diameter of 20.5 mm.展开更多
为研究预应力混凝土用钢棒(steel bar for prestressed concrete, PC钢棒)-钢筋混合配筋混凝土柱的抗震性能,设计制作了5根相同尺寸、相同纵筋配筋率、不同PC钢棒替代率的PC钢棒-钢筋混合配筋混凝土柱试件,通过拟静力试验研究了PC钢棒...为研究预应力混凝土用钢棒(steel bar for prestressed concrete, PC钢棒)-钢筋混合配筋混凝土柱的抗震性能,设计制作了5根相同尺寸、相同纵筋配筋率、不同PC钢棒替代率的PC钢棒-钢筋混合配筋混凝土柱试件,通过拟静力试验研究了PC钢棒替代率对试件抗震性能的影响规律。结果表明:随着PC钢棒替代率的提高,试件的裂缝分布高度降低,裂缝数量变少,滞回曲线的饱满程度逐渐降低,耗能能力降低,残余位移角减小,自复位能力增强;当PC钢棒的替代率不大于50%时,各试件的峰值荷载接近;当PC钢棒的替代率大于50%时,试件的峰值荷载随PC钢棒替代率的增大而提高;当加载位移角相同且不大于1.0%时,配置PC钢棒的混凝土柱的残余位移角较为接近,且明显小于未配置PC钢棒的钢筋混凝土柱的残余位移角;当加载位移角相同且大于1%时,柱的残余位移角随着PC钢棒替代率的增高而降低。展开更多
为明确并提升承插式拼装桥墩抵抗压弯扭等复合荷载的能力,提出了一种结合灌浆套筒和承插口组合连接的新型承插装配式墩,通过复合荷载作用下的拟静力试验对比了现浇(reinforced concrete,RC)、灌浆套筒(grouting and sleeve,GS)、承插口(...为明确并提升承插式拼装桥墩抵抗压弯扭等复合荷载的能力,提出了一种结合灌浆套筒和承插口组合连接的新型承插装配式墩,通过复合荷载作用下的拟静力试验对比了现浇(reinforced concrete,RC)、灌浆套筒(grouting and sleeve,GS)、承插口(socket with ultra-high performance concrete,SU)和结合套筒连接钢筋的新型承插(grouting sleeve and socket with ultra-high performance concrete,GSU)连接拼装桥墩的损伤机理和滞回性能,结合有限元模型重点讨论了承插口深度对滞回性能的影响。结果表明:4个构件的破坏模式都是以受弯破坏为主的弯扭破坏,其中SU构件出现了轻微拔起的现象,而对应的GSU构件并未出现该现象,与RC构件接近;各构件的剪力-墩顶位移骨架发展趋势比较一致,由于GSU构件纵向钢筋连续,具有更好的整体性能,其抗弯承载力与RC构件接近,且明显大于SU和GS构件,4个构件弯曲滞回耗能较为接近;承插口深度为1.0倍截面宽度的GSU构件抗扭承载力略高于RC构件,且明显大于其余装配式墩,GSU构件的扭转刚度、延性系数和耗能能力均大于其他3个墩;当承插口深度采用0.5倍构件截面宽度时,新型承插GSU构件的抗弯和抗扭承载力均略高于整体现浇构件,具有良好的抵抗压弯扭荷载的能力,可以实现浅承插口连接。研究结果可为压弯扭复合作用下装配式墩的应用提供试验依据。展开更多
基金Natural Science Foundation of China under Grant Nos.51178342 and 51578314
文摘Earthquake investigations have illustrated that even code-compliant reinforced concrete frames may suffer from soft-story mechanism.This damage mode results in poor ductility and limited energy dissipation.Continuous components offer alternatives that may avoid such failures.A novel infilled rocking wall frame system is proposed that takes advantage of continuous component and rocking characteristics.Previous studies have investigated similar systems that combine a reinforced concrete frame and a wall with rocking behavior used.However,a large-scale experimental study of a reinforced concrete frame combined with a rocking wall has not been reported.In this study,a seismic performance evaluation of the newly proposed infilled rocking wall frame structure was conducted through quasi-static cyclic testing.Critical joints were designed and verified.Numerical models were established and calibrated to estimate frame shear forces.The results evaluation demonstrate that an infilled rocking wall frame can effectively avoid soft-story mechanisms.Capacity and initial stiffness are greatly improved and self-centering behavior is achieved with the help of the infilled rocking wall.Drift distribution becomes more uniform with height.Concrete cracks and damage occurs in desired areas.The infilled rocking wall frame offers a promising approach to achieving seismic resilience.
文摘The effects of microstructure on quasi-static transverse loading behavior of 3D circular braided composite tubes were studied. Transverse loading tests were conducted. Transverse load-deflection curves were obtained to analyze the effects of braiding parameters including the braiding angle, the wall thickness, and the diameter on the transverse loading of 3D circular braided composite tubes. Breaking loads, moduli and strengths had also been used to describe the transverse loading behaviors. The failure morphologies were shown to reveal damage mechanisms. From the results, the increase in braiding angle, wall thickness and diameter increases the ability of anti-deformation and breaking load of braided tubes. The breaking load of specimen with a braiding angle of 45° is about 1.68 times that of specimen with a braiding angle of 15°. The breaking load of specimen with 4 layers of yarns is about 2.15 times that of specimen with 2 layers of yarns. The breaking load of the tube with a diameter of 25.5 mm is about 2.39 times that of the tube with a diameter of 20.5 mm.
文摘为研究预应力混凝土用钢棒(steel bar for prestressed concrete, PC钢棒)-钢筋混合配筋混凝土柱的抗震性能,设计制作了5根相同尺寸、相同纵筋配筋率、不同PC钢棒替代率的PC钢棒-钢筋混合配筋混凝土柱试件,通过拟静力试验研究了PC钢棒替代率对试件抗震性能的影响规律。结果表明:随着PC钢棒替代率的提高,试件的裂缝分布高度降低,裂缝数量变少,滞回曲线的饱满程度逐渐降低,耗能能力降低,残余位移角减小,自复位能力增强;当PC钢棒的替代率不大于50%时,各试件的峰值荷载接近;当PC钢棒的替代率大于50%时,试件的峰值荷载随PC钢棒替代率的增大而提高;当加载位移角相同且不大于1.0%时,配置PC钢棒的混凝土柱的残余位移角较为接近,且明显小于未配置PC钢棒的钢筋混凝土柱的残余位移角;当加载位移角相同且大于1%时,柱的残余位移角随着PC钢棒替代率的增高而降低。
文摘为明确并提升承插式拼装桥墩抵抗压弯扭等复合荷载的能力,提出了一种结合灌浆套筒和承插口组合连接的新型承插装配式墩,通过复合荷载作用下的拟静力试验对比了现浇(reinforced concrete,RC)、灌浆套筒(grouting and sleeve,GS)、承插口(socket with ultra-high performance concrete,SU)和结合套筒连接钢筋的新型承插(grouting sleeve and socket with ultra-high performance concrete,GSU)连接拼装桥墩的损伤机理和滞回性能,结合有限元模型重点讨论了承插口深度对滞回性能的影响。结果表明:4个构件的破坏模式都是以受弯破坏为主的弯扭破坏,其中SU构件出现了轻微拔起的现象,而对应的GSU构件并未出现该现象,与RC构件接近;各构件的剪力-墩顶位移骨架发展趋势比较一致,由于GSU构件纵向钢筋连续,具有更好的整体性能,其抗弯承载力与RC构件接近,且明显大于SU和GS构件,4个构件弯曲滞回耗能较为接近;承插口深度为1.0倍截面宽度的GSU构件抗扭承载力略高于RC构件,且明显大于其余装配式墩,GSU构件的扭转刚度、延性系数和耗能能力均大于其他3个墩;当承插口深度采用0.5倍构件截面宽度时,新型承插GSU构件的抗弯和抗扭承载力均略高于整体现浇构件,具有良好的抵抗压弯扭荷载的能力,可以实现浅承插口连接。研究结果可为压弯扭复合作用下装配式墩的应用提供试验依据。
