Performance optimization of a SERF atomic magnetometer based on flat-top light beam

We explore the impact of pumping beams with different transverse intensity profiles on the performance of the spinexchange relaxation-free(SERF) atomic magnetometers(AMs). We conduct experiments comparing the traditional Gaussian optically-pumped AM with that utilizing the flat-top optically-pumped(FTOP) method. Our findings reveal that the FTOP-based approach outperforms the conventional method, exhibiting a larger response, a narrower magnetic resonance linewidth, and a superior low-frequency noise performance. Specifically, the use of FTOP method leads to a 16% enhancement in average sensitivity within 1 Hz–30 Hz frequency range. Our research emphasizes the significance of achieving transverse polarization uniformity in AMs, providing insights for future optimization efforts and sensitivity improvements in miniaturized magnetometers.

Crossed Beams Study on the Dynamics of F Atom Reaction with 1,2-Butadiene

We have investigated the dynamics of the F＋C4H6 reaction using the universal crossed molecular beam method. The C4H5F＋H reaction channel was observed in this experiment. Angular resolved time-of-flight spectra have been measured for the C4H5F product. Prod- uct angular distributions as well as kinetic energy distributions were determined for this product channel. Experimental results show that the C4H5F product is largely backward scattered with considerable forward scattering signal, relative to the F atom beam direction. This suggests that the reaction channel mainly proceeds via a long-lived complex formation mechanism, with possible contribution from a direct SN2 type mechanism.

Crossed Beams Study on the Dynamics of CI Atom Reaction with Silane

The dynamics of the Cl＋SiH4 reaction has been studied using the universal crossed molecular beam method. Angular resolved time-of-flight spectra have been measured for the channel SiH3Cl＋H. Product angular distributions as well as energy distributions in the center-ofmass frame were determined for the channel. Experimental results show that the SiH3Cl product is mainly backward scattered relative to the Cl atom beam direction, suggesting that the channel takes place via a typical SN2 type reaction mechanism.

Laser Ablation Atomic Beam Apparatus with Time-Sliced Velocity Map Imaging for Studying State-to-State Metal Reaction Dynamics

We report a newly constructed laser ablation crossed molecular beam apparatus, equipped with time-sliced velocity map imaging technique, to study state-to-state metal atom reaction dynamics. Supersonic metal atomic beam is generated by laser vaporization of metal rod, and free expansion design without gas flow channel has been employed to obtain a good quality of metal atomic beam. We have chosen the crossed-beam reaction Al＋O2 to test the performance of the new apparatus. Two-rotational-states selected AIO（X^2∑＋, v=0, N and N＋I4） products can be imaged via P（N） and R（N＋14） branches of the Av=l band at the same wavelength, during （1＋1） resonance-enhanced multi-photon ionization through the AIO（D2E＋） intermediate state. In our experiment at 244.145 nm for simultaneous transitions of P（15） and R（29） branch, two rings in slice image were clearly distinguishable, corresponding to the AiO（v=0, N=IS） and AIO（v=0, N=29） states respectively. The energy difference between the two rotational levels is 403 cm^-1. The success of two states resolved in our apparatus suggests a better collisional energy resolution compared with the recent research study [J. Chem. Phys. 140, 214304 （2014）].

A cold ^(87)Rb atomic beam

We demonstrate an experimental setup for the production of a beam source of cold 87Rb atoms. The atoms are extracted from a trapped cold atomic cloud in an unbalanced three-dimensional magneto-optical trap. Via a radiation pressure difference generated by a specially designed leak tunnel along one trapping laser beam, the atoms are pushed out continuously with low velocities and a high flux. The most-probable velocity in the beam is varied from 9 m/s to 19 m/s by varying the detuning of the trapping laser beams in the magneto-optical trap and the flux can be tuned up to 4× 10^9 s-1 by increasing the intensity of the trapping beams. We also present a simple model for describing the dependence of the beam performance on the magneto optical trap trapping laser intensity and the detuning.

Diffracted field distribution from a knife-edge truncated semi-Gaussian beam as an atomic （molecular） mirror

We investigate the diffraction characteristics of an incident Gaussian beam cut by a straight edge bounding a semi-infinite opaque plane using Kirchhoff scalar wave theory in the Fresnel limit, and propose a new and simple mirror scheme to reflect atoms by using the intensity gradient induced by a blue-detuned semi-Gaussian laser beam. The optical potential of the diffracted light of the knife-cut semi-Gaussian beam for 85 Rb atom and its spontaneous emission probability are calculated and compared with the performance of the evanescent-wave mirror. Our study shows that the optical potential of the diffracted light of the semi-Gaussian beam is far higher than that of the evanescent light wave, and the maximum normal velocity of the incident atoms can be far greater than that of the evanescent light wave under the same parameters, so the blue-detuned semioGaussian beam, as a novel atomic mirror, can be used to efficiently reflect cold atoms with a normal velocity of greater than 1 m/s. However, the intensity gradient （force） of the diffracted light of the semi-Gaussian-beam is much smaller than that of the evanescent light wave, so its spontaneous emission probability is greater than that from the evanescent-wave when the normal velocity of incident atoms is greater.

Demonstration of a cold atom beam splitter on atom chip

We report an experimental demonstration of a new scheme to split cold atoms on an atom chip. The atom chip consists of a U-wire and a Z-wire. The cold atom cloud is initially loaded and prepared in the Z-trap, which is split into two separate parts by switching on the current of the U-wire. The two separate atom clouds have a distance more than one millimeter apart from each other and show almost symmetrical profiles, corresponding to about a 50/50 splitting ratio.

A Single Folded Beam Magneto-Optical Trap System for Neutral Mercury Atoms

Mercury is a promising candidate for the optical lattice clock, due to its low sensitivity to the blackbody radiation. We develop a single folded beam magneto-optical trap for the neutral mercury optical lattice clock, with a 253. 7nm frequency quadrupled laser. Up to 1.7 × 10^6 （202Hg） or 1.5 × 10^6 （199Hg） atoms can be captured, and the atom temperature is lowered to 170μK （202Hg） or 50μK （199Hg）. The cold atom signals of all six rich abundant isotopes are observed in this system.

Production and guidance of pulsed atomic beams on chip

We demonstrated two experimental methods of producing and guiding pulsed atomic beams on chip. One is to trap atoms first in a U-type magneto-optical trap on the chip, then transfer them to the magnetic guide field and push them simultaneously by a continuous force from the power imbalance of the magneto-optical trap laser beams hence the pulsed cold atom beams are produced and move along the magnetic guide to the destination. The other is to trap atoms directly by a H-type magneto-optical trap, then push them to make them move along the magnetic guide field, thus high rate cold atom beams can be produced and guided on the chip.

A Slow and Clean Fluorine Atom Beam Source Based on Ultraviolet Laser Photolysis

A slow and clean uorine atom beam source is one of the essential components for the low-collision energy scattering experiment involving uorine atom.In this work,we describe a simple but ef-fective photolysis uorine atom beam source based on ultraviolet laser photolysis,the performance of which was demonstrated by high-resolution time-of-ight spectra from the reactive scattering of F+HD.This beam source paved the way for stud-ies of low energy collisions with uorine atoms.

Atomic-Oxygen Beam Source with Compact ECR Plasma

An atomic-oxygen beam source with compact ECR plasma was successfully investigated. The microwave was produced and transmitted in a coaxial mode, and coupled with the loop. The plasma was produced at a higher asymmetry magnetic mirror field, and neutralized with the molybdenum target at a lower asymmetry magnetic mirror field. The magnetic field was constituted with permanent magnets. This source has a higher flux density of atom beam, a lower operating pressure, a smaller power consumption and low-cost. When it was installed at the equipment to study the interaction of the beam with the surface, the operation was carried out very easily and with a good stability.

Enhanced cold mercury atom production with two-dimensional magneto-optical trap

A cold atom source is important for quantum metrology and precision measurement.To reduce the quantum projection noise limit in optical lattice clock,one can increase the number of cold atoms and reduce the dead time by enhancing the loading rate.In this work,we realize an enhanced cold mercury atom source based on a two-dimensional(2D)magnetooptical trap(MOT).The vacuum system is composed of two titanium chambers connected with a differential pumping tube.Two stable cooling laser systems are adopted for the 2D-MOT and the three-dimensional(3D)-MOT,respectively.Using an optimized 2D-MOT and push beam,about 1.3×10^(6)atoms,which are almost an order of magnitude higher than using a pure 3D-MOT,are loaded into the 3D-MOT for202Hg atoms.This enhanced cold mercury atom source is helpful in increasing the frequency stability of a neutral mercury lattice clock.

Application of Electron-Shelving Detection via 423 nm Transition in Calcium-Beam Optical Frequency Standard

A new scheme of small compact optical frequency standard based on thermal calcium beam with application of 423 nm shelving detection and sharp-angle velocity selection detection is proposed. Combining these presented techniques, we conclude that a small compact optical frequency standard based on thermal calcium beam will outperform the commercial caesium-beam microwave dock, like the 5071 Cs clock （from Hp to Agilent, now Symmetricom company）, both in accuracy and stability.

Analysis of Cr atom focusing deposition properties in the double half Gaussian standing wave field

The use of the dipole force on atoms is a new technology that is used to build nanostructures. In this way, a high quality standard nano-grating can be obtained. Based on the semi-classical model, the motion equation is investigated and the trajectories of atoms in double half Gaussian standing wave field are simulated. Compared with the Gaussian standing wave field, the double half Gaussian standing wave can well focus the Cr atoms. In order to obtain this kind of beam, a prism is designed and the experimental result shows that the beam is well generated.

Intense source of cold cesium atoms based on a two-dimensional magneto–optical trap with independent axial cooling and pushing

We report our studies on an intense source of cold cesium atoms based on a two-dimensional（2D） magneto–optical trap（MOT） with independent axial cooling and pushing.The new-designed source,proposed as 2D-HP MOT,uses hollow laser beams for axial cooling and a thin pushing laser beam to extract a cold atomic beam.With the independent pushing beam,the atomic flux can be substantially optimized.The total atomic flux maximum obtained in the 2D-HP MOT is4.02 × 1010atoms/s,increased by 60 percent compared to the traditional 2D＋MOT in our experiment.Moreover,with the pushing power 10 μW and detuning 0Γ,the 2D-HP MOT can generate a rather intense atomic beam with the concomitant light shift suppressed by a factor of 20.The axial velocity distribution of the cold cesium beams centers at 6.8 m/s with an FMHW of about 2.8 m/s.The dependences of the atomic flux on the pushing power and detuning are studied in detail.The experimental results are in good agreement with the theoretical model.

Rubidium-beam microwave clock pumped by distributed feedback diode lasers

A rubidium-beam microwave clock, optically pumped by a distributed feedback diode laser, is experimentally investigated. The clock is composed of a physical package, optical systems, and electric servo loops. The physical package realizes the microwave interrogation of a rubidium-atomic beam. The optical systems, equipped with two 780-nm distributed feedback laser diodes, yield light for pumping and detecting. The servo loops control the frequency of a local oscillator with respect to the microwave spectrum. With the experimental systems, the microwave spectrum, which has an amplitude of 4 n A and a line width of 700 Hz, is obtained. Preliminary tests show that the clock short-term frequency stability is 7 × 10^-11 at 1 s, and 3 × 10^-12 at 1000 s. These experimental results demonstrate the feasibility of the scheme for a manufactured clock.

Advanced Techniques for Quantum-State Specific Reaction Dynamics of Gas Phase Metal Atoms

One of the themes of modern molecular reac tion dynamics is to charac terize elementary chemical reactions from“quan tum state to quan tum stat e”,and the study of molecular reaction dynamics in excited states can help test the validi ty of modern chemical t heories and provide met hods to cont rol chemical reactions.The subject of this review is to describe the recent experimental techniques used to study the reaction dynamics of metal atoms in the gas phase.Through these techniques,information such as the internal energy distribution and angular distribution of the nascent products or the three-dimensional stereodynamic reactivity can be obtained.In addition,by preparing metal at oms wi th specific exci ted elec tronic states or orbi tal arrangemen ts,information about the reactivity of the electronic states enriches the relevant understanding of the electron transfer mechanism in metal reaction dynamics.

Investigation on the Effect of Film Thickness on the Surface Morphology, Electrical and Optical Properties of E-Beam Deposited Indium Tin Oxide (ITO) Thin Film

The following article has been retracted due to the fact that the authors practise fraud. The scientific community takes a very strong view on this matter, and the Advances in Materials Physics and Chemistry treats all unethical behavior seriously. This paper published in Vol. 4 No. 10 194-202, 2014 has been removed from this site. ? Title: Investigation on the Effect of Film Thickness on the Surface Morphology, Electrical and Optical Properties of E-Beam Deposited Indium Tin Oxide (ITO) Thin Film ? Authors: Golam Saklayen, Shahinul Islam, Ferdous Rahman, Abu Bakar

Controllable Magnetic Focusing of Cold Atoms on a Chip

We propose a new lens scheme to focus cold atoms by using a controllable inhomogeneous magnetic field from a square current-carrying wire fabricated on a chip. The spatial distributions of the magnetic field are calculated, and the results show that the generated magnetic field is a two-dimensional （2D） quadrupole one and can be used to focus cold atoms or a cold atomic beam. The dynamic processes of cold atoms passing through our square wire layout and its focusing properties are studied by using Monte Carlo simulations. Our study shows that the atomic clouds can be focused effectively by our magnetic lens scheme, and the focal length of the atomic lens and its radius of focused spot can be continuously changed by adjusting the current in the wires.

原子力显微镜-扫描电子显微镜共定位表征系统的研发与应用

微纳加工过程中,常有样品需要进行聚焦离子束(FIB)溅射、切割,扫描电子显微镜(SEM)以及原子力显微镜(AFM)表征,而这三类仪器都需要将样品固定在样品台上才可测试,固定不佳会影响表征结果.但固定好的样品在不同仪器之间转移、拆卸、再固定的过程中极易受到破坏.基于以上问题,设计了AFM-SEM-FIB样品共定位系统,可实现样品在此三种仪器之间的无损转移及共定位,避免珍贵样品破坏及目标丢失,以及解决AFM扫描无法控制方向、迅速调整位点等问题.在微纳表征中有优异的表现,系统已被开发成产品并量产销售.