A new solution called component modification in-process was introduced to the difficult grinding of air quenching steel slag by a series of experiments. The results show that the fly ash added into the molten steel sl...A new solution called component modification in-process was introduced to the difficult grinding of air quenching steel slag by a series of experiments. The results show that the fly ash added into the molten steel slag before air quenching can more effectively improve the slag's grindability than milltailings, which is the other modification agent tested under the same conditions. The role of fly ash is strengthened as its proportion increases, although the degree of promotion is gradually reduced. As a result of the reaction between fly ash and steel slag at high temperature, some new mineral phases and vitreous bodies with fine grindability promote the slag grinding easily. This work is helpful to making a comprehensive utilization of steel slag and maximize its economic efficiency in China.展开更多
In order to effectively utilize the resources and energy of molten steel slag,the variation of precipitation phase and specific heat of air quenched steel slag(AQSS)particles during continuous cooling process was inve...In order to effectively utilize the resources and energy of molten steel slag,the variation of precipitation phase and specific heat of air quenched steel slag(AQSS)particles during continuous cooling process was investigated by FactSage and thermogravimetry differential scanning calorimetry.The cooling and solidification process of molten AQSS particles was simulated by Fluent.The microstructure changes in AQSS particles in solidification process were analyzed using an ultrahigh temperature laser confocal microscope and a scanning electron microscope.The results indicated that in the cooling process of molten AQSS particles,the precipitation of Ca_(2)Fe_(2)O_(5) resulted in the largest change of specific heat.Under the condition of slow cooling,the cooling rate is more obviously affected by specific heat.When the initial air velocity was 300 m s^(-1),there was the highest temperature difference in AQSS particles during cooling process.What is more,the compactness of the boundary region of AQSS particles was obviously better than that of its central region.展开更多
基金Project(IRT0708) supported by Program for Changjiang Scholars and Innovative Research Team in University of China ("PCSIRT")Project(20070008031) supported by the Research Fund for the Dectoral Program of Higher Education of China
文摘A new solution called component modification in-process was introduced to the difficult grinding of air quenching steel slag by a series of experiments. The results show that the fly ash added into the molten steel slag before air quenching can more effectively improve the slag's grindability than milltailings, which is the other modification agent tested under the same conditions. The role of fly ash is strengthened as its proportion increases, although the degree of promotion is gradually reduced. As a result of the reaction between fly ash and steel slag at high temperature, some new mineral phases and vitreous bodies with fine grindability promote the slag grinding easily. This work is helpful to making a comprehensive utilization of steel slag and maximize its economic efficiency in China.
基金This work was supported by the Natural Science Foundation of Chongqing,China(Project No.cstc2020jcyj-msxmX0043)the Fundamental Research Funds for the Central Universities(Project No.2020CDJ-LHZZ-084)the National Natural Science Foundation of China(No.51974047).
文摘In order to effectively utilize the resources and energy of molten steel slag,the variation of precipitation phase and specific heat of air quenched steel slag(AQSS)particles during continuous cooling process was investigated by FactSage and thermogravimetry differential scanning calorimetry.The cooling and solidification process of molten AQSS particles was simulated by Fluent.The microstructure changes in AQSS particles in solidification process were analyzed using an ultrahigh temperature laser confocal microscope and a scanning electron microscope.The results indicated that in the cooling process of molten AQSS particles,the precipitation of Ca_(2)Fe_(2)O_(5) resulted in the largest change of specific heat.Under the condition of slow cooling,the cooling rate is more obviously affected by specific heat.When the initial air velocity was 300 m s^(-1),there was the highest temperature difference in AQSS particles during cooling process.What is more,the compactness of the boundary region of AQSS particles was obviously better than that of its central region.
