Effect of different quenching processes following solid-solution treatment on properties and precipitation behaviors of 7050 alloy

The effects of quenching in different ways following solid-solution treatment on properties and precipitation behaviors of7050 alloy were investigated by transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, selected areaelectron diffraction （SAED）, hardness and electrical conductivity tests. Results show that after quenching in different ways, electricalconductivity of the alloy decreases rapidly in the first 48 h of natural aging. The electrical conductivity of 7050 alloy in natural agingstate is determined by the size and density of GP zones, and the size of GP zones is the main factor. After natural aging for 70 d, thesize of GP zones is 1.8-2.6 nm in matrix of the immersion quenched sample and it is 1.4-1.8 nm in matrix of both water mist andforced air quenched samples. After natural and artificial peak aging, the hardness of the water mist quenched sample is HV 193.6 andits electrical conductivity is 30.5% （IACS） which are both higher than those of the immersion quenched sample. Therefore, watermist quenching is an ideal quenching method for 7050 alloy sheets after solid-solution treatment.

Synthesis and Characterization of High-purity Aluminum Titanate with Water Quenching Method

High-purity aluminum titanate was synthesized via a water quenching method with waste-residue in the aluminum factory and industrial TiO2 as the main raw materials, which belongs to the comprehensive utilization of solid wastes. Compared with the conventional method, it can reduce synthesis temperature, effectively inhibit decomposition and raise the content of AT; the addition of tiny silicon powder can improve the sintering and optimize the properties of AT. The crystalline phase structure and microstructure of each sample were characterized with XRD and SEM methods; the content of each crystalline phase in each sample was confirmed with Rietveld Quantification method; the properties of each sample were also tested. The experimental results showed that No. 4 is the optimum specimen, with the corresponding mass ratio of Al2O3/TiO2 to be 1.27 and the content of AT of 97.2 wt%. The addition of optimum tiny silicon powder is confirmed to be 8wt%; its corresponding bulk density is 2.63 g/cm^3, bending strength is 46.34 MPa, and the retention of one thermal vibration bending strength is 71.5%.

Determination of trace arsenic(V) by catalytic solid substrate-room temperature phosphorescence quenching method

In the H2SO4 medium and in the presence of dodecylbenzene sulfonic acid sodiumsalt (DBS), dimethyl yellow (R) could emit strong and stable solid substrate room temperature phosphorescence (RTP) on filter paper. And NaIO4 could oxidize R to cause the RTP quenching. Arsenic(V) could catalyze the reaction of NaIO4 oxidizing R, which caused the RTP sharply quenching. The reducing value of phosphorescence intensity (ΔIp) for the system with DBS is 3.3 times higher than that without DBS. Moreover, the ΔIp is proportional to the concentration of As(V). Based on the facts above, a new RTP quenching method for the determination of trace As(V) has been established.

A Reproducible Approach of Preparing High-Quality Overdoped Bi_2Sr_2CaCu_2O_(8+δ) Single Crystals by Oxygen Annealing and Quenching Method

We report a reproducible approach in preparing high-quality overdoped Bi2 Sr2 CaCu2 08＋δ （Bi2212） single crystals by annealing Bi2212 crystals in high oxygen pressure followed by a fast quenching. In this way, high-quality overdoped and heavily overdoped Bi2212 single crystals are obtained by controlling the annealing oxygen pressure. We find that, beyond a limit of oxygen pressure that can achieve most heavily overdoped Bi2212 with a Tc N63 K, the annealed Bi2212 begins to decompose. This accounts for the existence of the hole-doping limit and thus the Tc limit in the heavily overdoped region of Bi2212 by the oxygen annealing process. These results provide a reliable way in preparing high-quality overdoped and heavily overdoped Bi2212 crystals that are important for studies of the physical properties, electronic structure and superconductivity mechanism of the cuprate superconductors.

Preparation of micro-nano hollow multiphase ceramic microspheres containing MnFe_2O_4 absorbent by self-reactive quenching method

Fe–Fe2O3–MnO2–sucrose–epoxy resin and O2 as reaction system and feed gas,separately,were used to prepare micro-nano hollow multiphase ceramic microspheres containing MnFe2O4absorbent by self-reactive quenching method which is integrated with flame jet,selfpropagating high-temperature synthesis(SHS),and rapidly solidification.The morphologies and phase compositions of hollow microspheres were studied by scanning electron microscope(SEM),transmission electron microscope(TEM),X-ray diffraction(XRD),and energy dispersive spectroscopy.The results show that the quenching products are regular spherical substantially with hollow structure,particle size is between few hundreds nanometers and 5 lm.Phase compositions are diphase of Fe3O4,Mn3O4,and MnFe2O4,and the spinel soft magnetic ferrite MnFe2O4 with microwave magnetic properties is in majority.Collisions with each other,burst as well as‘‘refinement’’of agglomerate powders in flame field may be the main reasons for the formation of micro-nano hollow multiphase ceramic microspheres containing MnFeOabsorbent.

Study on State of Terbium Ion in Liposome by One order Derivative Fluorescence Quenching Method

The state of Tb3+ is investigated in liposome. When the concentration of PC is below CMC (critical micell concentration), most of Tb3+ is associated with PC, the binding constant is about 3.35×103 L/mol. When the concentration of PC is beyond CMC, most of Tb3+ is dimerized, the dimerization constant is about 3.92×104L/mol. In PC?CH?H2O system, the binding constant of Tb3+?CH complex 2.93×104L/mol is obtained.

A FLUORESCENCE QUENCHING IMNUNOASSAY METHOD FOR DETERMINATION OF TRACE ALBUMIN USING UNLABELED EUROPIUM CHELATE

A fluoroimmunoassay method using unlabeled europium chelate is described.The principle is similar to that of fluoroimmunoassay method using lanthanide chelate as labels.The procedure is simple because labeling process is omitted.The detection limit is about 10^(10) mol/L antigen.The relative standard deviation of immunoassay is less than 10%.The recoveries of human serum albumin and estradiol protein conjugate are 96-105% and 111% respectively.

Determination of heavy metal ion in landfill leachate with solvent extracting ＆ fluorescence quenching method

Add the masking agent and biscyclohexanoneoxalyldihydraone into the diluted clarificd liquid of the landfill leachate which was treatmented by digestion and centrifugal filtration to complexate all heavy metal ion in the trcatmented liquid, and extracted using CHCl3 many time, then it were demasking and decomposing respectively, and adjusted different pH and formed Me^n＋-PAN coordination compound when these metal ion reaction with PAN. The Fluoresence quenching of Rh6G （λex/λem=543mn/558nm） when the metal ion coordination compound was add into the Rh6G solution step by step, the quenching intensity was directly proportional to the concentration of the metal ion in the certain range. So a new method of fast and simple for determination of trace metal ion in landfill lcachate was established to determine metal ion in sample of different landfill leachate in Three Gorge Water Reservoir, and comparison the classic assay method with satisfactory results.

A QUENCHING FLUORESCENCE IMMUNOASSAY METHOD FOR DETERMINATION OF TRACE ALBUMIN USING UNLABELED TERBIUM CHELATE

A fluoroimmunoassay method using unlabeled Terbium chelate is described.The principle is similar to that of fluoroimmunoassay method using lanthanide chelate as labels.The procedure is simpte because labeling process is unnecessary.The recovery of HSA and albumin in urine is 107% and 95% respectively.The standard deviation is tess than 10%.

Determination of Chlorobenzene by Hydroxypropyl-β- Cyclodextrin Sensitized Fluorescence Quenching Method with Neutral Red as a Fluorescence Probe

The fluorescence quenching of inclusion complex of neutral red （NR） and hydroxypropyl-β-cyclodextrin （HP-β-CD） carried by chlorobenzene was investigated. The fluorescence intensity of NR increased due to the formed inclusion complex of HP-β-CD and NR. But the fluorescence intensity of NR-HP-β-CD diminished when chlorobenzene was added, and there was a linear relationship between the fluorescence quenching value of the system （△IF = IF, NR-HP-β-CD - IF, CB-NB-NR-HP-β-CD） and the concentration of chlorobenzene. Based on this, a novel fluorescence quenching method for the determination of chlorobenzene with NR as a fluorescence probe has been developed. Under the optimal conditions, the linear range of calibration curve for the determination of chlorobenzene was 5.0 × 10^-8 - 8.0 × 10^-6 mol/L and the detection limit was 1.0 × 10^-8 mol/L. It has been applied to determination ofchlorobenzene in synthetic waste water samples with satisfactory results.

Evolution of microstructure in semi-solid slurries of rheocast aluminum alloy

Semi-solid metal processing is being developed in die casting applications to give several cost benefits. To efficiently apply this emerging technology, it is important to understand the evolution of microstructure in semi-solid slurries for the control of the theological behavior in semi-solid state. An experimental apparatus was developed which can capture the grain structure at different times at early stages to understand how the semi-solid structure evolves. In this technique, semi-solid slurry was produced by injecting fine gas bubbles into the melt through a graphite diffuser during solidification. Then, a copper quenching mold was used to draw some semi-solid slurry into a thin channel. The semi-solid slurry was then rapidly frozen in the channel giving the microstructure of the slurry at the desired time. Samples of semi-solid 356 aluminum alloy were taken at different gas injection times of 1, 5, 10, 15, 20, 30, 35, 40, and 45 s. Analysis of the microstructure suggests that the fragmentation by remelting mechanism should be responsible for the formation of globular structure in this rheocasting process.

Dissolution-precipitation mechanism of self-propagating high-temperature synthesis of TiC-Cu cermets

The mechanism of self-propagating high-temperature synthesis （SHS） of TiC-Cu cermets was studied using a combustion front quenching method. Microstructural evolution in the quenched sample was observed using scanning electron microscope （SEM） with energy dispersive X-ray （EDX） spectrometry, and the combustion temperature was measured. The results showed that the combustion reaction started with local formation of Ti-Cu melt and could be described with the dissolution-precipitation mechanism, namely, Ti, Cu, and C particles dissolved into the Ti-Cu solution and TiC particles precipitated in the saturated Ti-Cu-C liquid solution. The local formation of Ti-Cu melt resulted from the solid diffusion between Ti and Cu particles.

Mechanism of Combustion Synthesis of TiC-Ti Cermet

In order to investigate the mechanism of combustion synthesis of TiC-Ti cermet, a mixture of Ti and C was used for a combustion front quenching test, and the microstructural evolution in the quenched sample was analyzed by scanning electron microscopy （SEM） and energy dispersive X-ray （EDX）. Also, a temperature-time profile of the combustion reaction was measured. Based on the experimental results, a reaction-dissolution-precipitation mechanism of the combustion synthesis of TiC-Ti was proposed.

Reaction dynamics in the combustion synthesis system of Al-CrO_3-Al_2O_3-NaF-N_2-O_2

A new material with heat-resistant and adiabatic characteristics and high strength was prepared using the combustion synthesis method by mixed powders of CrO3, Al, Al2O3, and NaF in atmospheric gas. The reaction dynamic process of the Al-CrO3-NaF-Al2O3-N2-O2 new material system by the combustion synthesis method was discussed based on the observation results by SEM, EDS, and XRD in combination with the combustion front quenching method （CFQM） and the relation curves between reaction free enthalpies and the corresponding temperatures. The combustion synthesis mechanism and the formation reasons of the phase in the combustion product were analyzed.

Electrochemical impedance spectra of V_2O_5 xerogel films with intercalation of lithium ion

Vanadium pentoxide xerogel films used for lithium rechargeable batteries were prepared from crystalline c-V2O5 by melt quenching method,then the electrochemical process of lithium intercalation into vanadium pentoxide xerogel films was simulated with an equivalent circuit model, which was derived from the mechanism of electrode reactions. Measured electrochemical impedance spectra at various electrode potentials were analyzed by using the complex non-linear least-squares fitting method. The results show that impedance spectra consist of 2 high-to- medium frequency depressed arcs and a low frequency straight line. The high frequency arc is attributed to the absorption reaction of lithium ions into the oxide film, the medium frequency arc is attributed to the charge transfer reaction at the vanadium oxide/electrolyte interface and the low frequency is characterized by a straight line with a phase angle of 45° corresponding to the diffusion of lithium ion through vanadium oxide phase. The experimental and calculated results are compared and discussed focusing on the electrochemical performance and the state of charge of the electrode. Moreover, the high consistence of the fitted values of the model to the experimental data indicates that this mathematical model does give a satisfying description of the intercalation process of vanadium pentoxide xerogel films.

Optimization of the quenching method for metabolomics analysis of Lactobacillus bulgaricus

This study proposed a quenching protocol for metabolite analysis of Lactobacillus delbrueckii subsp.bulgaricus.Microbial cells were quenched with 60% methanol/water,80% methanol/glycerol,or 80% methanol/water.The effect of the quenching process was assessed by the optical density（OD）-based method,flow cytometry,and gas chromatography-mass spectrometry（GC-MS）.The principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） were employed for metabolite identification.The results indicated that quenching with 80% methanol/water solution led to less damage to the L.bulgaricus cells,characterized by the lower relative fraction of prodium iodide（PI）-labeled cells and the higher OD recovery ratio.Through GC-MS analysis,higher levels of intracellular metabolites（including focal glutamic acid,aspartic acid,alanine,and AMP） and a lower leakage rate were detected in the sample quenched with 80% methanol/water compared with the others.In conclusion,we suggested a higher concentration of cold methanol quenching for L.bulgaricus metabolomics due to its decreasing metabolite leakage.

The synthesis of B,N-carbon dots by a combustion method and the application of fluorescence detection for Cu^2+

Heteroatom doping is an efficient approach to regulate the fluorescence properties of carbon dots.Using aminophenylboronic acid as the raw material,a combustion method was developed for the synthesis of boron,nitrogen-doped carbon dots（B,N-carbon dots）.The B,N-carbon dots emitted green fluorescence and displayed high resistance to both photo bleaching and ionic strength.A facile fluorescence sensing approach for Cu^2＋ was fabricated via static fluorescence quenching.Under optimal conditions,a rapid detection of Cu^2＋ could be completed in 2 min with a linearity ranging from 1 μmol/L to 25 μmol/L and a detection limit of 0.3 μmol/L Furthermore,the proposed method showed potential applications for the detection of Cu^2＋ in natural water samples.