By introducing a dimensionless parameter to couple the two objectives, weight and radar absorbing performance, into a single objective function, a multi-objective optimization procedure for the radar absorbing sandwic...By introducing a dimensionless parameter to couple the two objectives, weight and radar absorbing performance, into a single objective function, a multi-objective optimization procedure for the radar absorbing sandwich structure （RASS） with a cellular core is proposed. The optimization models considered are one-side clamped sandwich panels with four kinds of cores subject to uniformly distributed loads. The average specular reflectivity calculated with the transfer matrix method and the periodic moment method is utilized to characterize the radar absorbing performance, while the mechanical constraints include the facesheet yielding, core shearing, and facesheet wrinkling. The optimization analysis indicates that the sandwich structure with a two-dimensional （2D） composite lattice core filled with ultra-lightweight sponge may be a better candidate of lightweight RASS than those with cellular foam or hexagonal honeycomb cores. The 2D Kagome lattice is found to outperform the square lattice with respect to radar absorbing.展开更多
A thin radar-infrared stealth-compatible structure with reflectivity below -10 dB in the whole radar X wave band and infrared emissivity less than 0.3 in the infrared region of 8μm-14 μm is reported. The designed st...A thin radar-infrared stealth-compatible structure with reflectivity below -10 dB in the whole radar X wave band and infrared emissivity less than 0.3 in the infrared region of 8μm-14 μm is reported. The designed stealth-compatible structure consists of metallic frequency selective surface （MFSS）, resistive frequency selective surface （RFSS）, and metal backing from the top down, and it is only 2. l-mm thick. The MFSS is made up of some divided low infrared emissivity metal copper films, and the RFSS consists of a capacitive array of square resistive patches. They are placed close together, working as an admittance sheet because of a mutual influence between them, and the equivalent admittance sheet greatly reduces the thickness of the whole structure. The proposed stealth-compatible structure is verified both by simulations and by experimental results. These results indicate that our proposed stealth-compatible structure has potential applications in stealth fields.展开更多
The advances in metamaterial science and technology have raised the expectations of camouflage or stealth researchers to one order higher in terms of absorption characteristics.As metamaterial inspired radar absorbing...The advances in metamaterial science and technology have raised the expectations of camouflage or stealth researchers to one order higher in terms of absorption characteristics.As metamaterial inspired radar absorbing structures are proving themselves as a good candidate with near unity absorption,feasibility towards hardware realization is necessary.Hence an extensive literature survey of metamaterial inspired radar absorbing structure has been carried out and reported in this paper along with the challenges and material issues.The various types of metamaterial structures that can be used as absorber have been provided along with simulation figures.To make the review more useful,graphene and carbon nanotube(CNT)based radar absorbing structures are also included along with their simulation and fabrication techniques.展开更多
对多层阻抗渐变的吸波结构设计思想进行了分析,介绍了多层阻抗渐变思想在吸波层板和泡沫两类结构吸波材料设计上的应用。理论计算与试验验证结果均表明,采用多层阻抗渐变设计能够使吸波层板和泡沫的吸波带宽向低频拓展,同时显著提高吸...对多层阻抗渐变的吸波结构设计思想进行了分析,介绍了多层阻抗渐变思想在吸波层板和泡沫两类结构吸波材料设计上的应用。理论计算与试验验证结果均表明,采用多层阻抗渐变设计能够使吸波层板和泡沫的吸波带宽向低频拓展,同时显著提高吸波泡沫的吸收强度。具有三个阻抗渐变吸收层的4 mm厚吸波层板在5~18 GHz频段反射率小于-10 d B;具有六个阻抗渐变吸收层的22 mm厚吸波泡沫在2~18 GHz频段反射率小于-10 d B,其中在6~18 GHz频段反射率小于-20 d B,8~12 GHz频段反射率小于-30 d B。多层阻抗渐变设计是提高结构吸波材料吸波性能的有效手段。展开更多
基金Project supported by the National Natural Science Foundation of China (Nos. 90816025, 10632060,and 10640150395)the National Basic Research Program of China (No. G2006CB601202)the Fund of State Key Laboratory of Explosion Science and Technology (No. KFJJ08-15)
文摘By introducing a dimensionless parameter to couple the two objectives, weight and radar absorbing performance, into a single objective function, a multi-objective optimization procedure for the radar absorbing sandwich structure （RASS） with a cellular core is proposed. The optimization models considered are one-side clamped sandwich panels with four kinds of cores subject to uniformly distributed loads. The average specular reflectivity calculated with the transfer matrix method and the periodic moment method is utilized to characterize the radar absorbing performance, while the mechanical constraints include the facesheet yielding, core shearing, and facesheet wrinkling. The optimization analysis indicates that the sandwich structure with a two-dimensional （2D） composite lattice core filled with ultra-lightweight sponge may be a better candidate of lightweight RASS than those with cellular foam or hexagonal honeycomb cores. The 2D Kagome lattice is found to outperform the square lattice with respect to radar absorbing.
基金Project supported by the National Natural Science Foundation of China (Grant No.51202291)
文摘A thin radar-infrared stealth-compatible structure with reflectivity below -10 dB in the whole radar X wave band and infrared emissivity less than 0.3 in the infrared region of 8μm-14 μm is reported. The designed stealth-compatible structure consists of metallic frequency selective surface （MFSS）, resistive frequency selective surface （RFSS）, and metal backing from the top down, and it is only 2. l-mm thick. The MFSS is made up of some divided low infrared emissivity metal copper films, and the RFSS consists of a capacitive array of square resistive patches. They are placed close together, working as an admittance sheet because of a mutual influence between them, and the equivalent admittance sheet greatly reduces the thickness of the whole structure. The proposed stealth-compatible structure is verified both by simulations and by experimental results. These results indicate that our proposed stealth-compatible structure has potential applications in stealth fields.
文摘The advances in metamaterial science and technology have raised the expectations of camouflage or stealth researchers to one order higher in terms of absorption characteristics.As metamaterial inspired radar absorbing structures are proving themselves as a good candidate with near unity absorption,feasibility towards hardware realization is necessary.Hence an extensive literature survey of metamaterial inspired radar absorbing structure has been carried out and reported in this paper along with the challenges and material issues.The various types of metamaterial structures that can be used as absorber have been provided along with simulation figures.To make the review more useful,graphene and carbon nanotube(CNT)based radar absorbing structures are also included along with their simulation and fabrication techniques.
文摘对多层阻抗渐变的吸波结构设计思想进行了分析,介绍了多层阻抗渐变思想在吸波层板和泡沫两类结构吸波材料设计上的应用。理论计算与试验验证结果均表明,采用多层阻抗渐变设计能够使吸波层板和泡沫的吸波带宽向低频拓展,同时显著提高吸波泡沫的吸收强度。具有三个阻抗渐变吸收层的4 mm厚吸波层板在5~18 GHz频段反射率小于-10 d B;具有六个阻抗渐变吸收层的22 mm厚吸波泡沫在2~18 GHz频段反射率小于-10 d B,其中在6~18 GHz频段反射率小于-20 d B,8~12 GHz频段反射率小于-30 d B。多层阻抗渐变设计是提高结构吸波材料吸波性能的有效手段。
